New Fragile Watermarking Technique to Identify Inserted Video Objects Using H.264 and Color Features

The transmission of video content over a network raises various issues relating to copyright authenticity,ethics,legality,and privacy.The protection of copyrighted video content is a significant issue in the video industry,and it is essential to find effective solutions to prevent tampering and modification of digital video content during its transmission through digital media.However,there are stillmany unresolved challenges.This paper aims to address those challenges by proposing a new technique for detectingmoving objects in digital videos,which can help prove the credibility of video content by detecting any fake objects inserted by hackers.The proposed technique involves using two methods,the H.264 and the extraction color features methods,to embed and extract watermarks in video frames.The study tested the performance of the system against various attacks and found it to be robust.The evaluation was done using different metrics such as Peak-Signal-to-Noise Ratio(PSNR),Mean Squared Error(MSE),Structural Similarity Index Measure(SSIM),Bit Correction Ratio(BCR),and Normalized Correlation.The accuracy of identifying moving objects was high,ranging from 96.3%to 98.7%.The system was also able to embed a fragile watermark with a success rate of over 93.65%and had an average capacity of hiding of 78.67.The reconstructed video frames had high quality with a PSNR of at least 65.45 dB and SSIMof over 0.97,making them imperceptible to the human eye.The system also had an acceptable average time difference(T=1.227/s)compared with other state-of-the-art methods.

RTP payload format for H.264/SVC scalable video coding

The scalable extension of H.264/AVC, known as scalable video coding or SVC, is currently the main focus of the Joint Video Team’s work. In its present working draft, the higher level syntax of SVC follows the design principles of H.264/AVC. Self-contained network abstraction layer units (NAL units) form natural entities for packetization. The SVC specification is by no means finalized yet, but nevertheless the work towards an optimized RTP payload format has already started. RFC 3984, the RTP payload specification for H.264/AVC has been taken as a starting point, but it became quickly clear that the scalable features of SVC require adaptation in at least the areas of capability/operation point signaling and documentation of the extended NAL unit header. This paper first gives an overview of the history of scalable video coding, and then reviews the video coding layer (VCL) and NAL of the latest SVC draft specification. Finally, it discusses different aspects of the draft SVC RTP payload format, in- cluding the design criteria, use cases, signaling and payload structure.

A rate control scheme for H.264 video under low bandwidth channel

The dilemma of the quantization parameter (QP) being involved in both rate control and rate-distortion optimization (RDO) prevents using the traditional rate control scheme. Although some rate control schemes are proposed to circumvent the dilemma, the inaccurate prediction model and improper bit allocation deter H.264 application on low bandwidth channel. To resolve this issue, this paper proposes a novel rate control scheme by considering the macroblock (MB) encoding complexity variation and buffer variation and by exploiting the spatio-temporal correlation sufficiently well. Simulations showed that this scheme improves the perceptual quality of the pictures with similar or smaller PSNR deviations when compared to that of rate control in JVT-O016.

Research on Remote Video Monitoring System Used for Numerical Control Machine Tools Based on Embedded Technology

This paper designed an embedded video monitoring system using DSP (Digital Signal Processing ) and ARM (Ad- vanced RISC Machine).This system is an important part of self-service operation of numerical control machine tools,At first the analog input signals from the CCD(Charge Coupled Device) camera are transformed into digital signals,and then output to the DSP system,where the video sequence is encoded according to the new generation image compressing standard called H.264.The code will be transmitted to the ARM system through xBus,and then be packed in the ARM system and transmitted to the client port through the gateway.Web technology,embedded technology and image compressing as well as coding technology are integrated in the system,which can be widely used in self-service operation of numerical control machine tools and intelligent robot control areas.

RTP-based broadcast streaming of high definition H.264/AVC video: an error robustness evaluation

In this work, we present an evaluation of the performance and error robustness of RTP-based broadcast streaming of high-quality high-definition (HD) H.264/AVC video. Using a fully controlled IP test bed (Hillestad et al., 2005), we broadcast high-definition video over RTP/UDP, and use an IP network emulator to introduce a varying amount of randomly distributed packet loss. A high-performance network interface monitoring card is used to capture the video packets into a trace file. Purpose-built software parses the trace file, analyzes the RTP stream and assembles the correctly received NAL units into an H.264/AVC Annex B byte stream file, which is subsequently decoded by JVT JM 10.1 reference software. The proposed measurement setup is a novel, practical and intuitive approach to perform error resilience testing of real-world H.264/AVC broadcast applications. Through a series of experiments, we evaluate some of the error resilience features of the H.264/AVC standard, and see how they perform at packet loss rates from 0.01% to 5%. The results confirmed that an appropriate slice partitioning scheme is essential to have a graceful degradation in received quality in the case of packet loss. While flexible macroblock ordering reduces the compression efficiency about 1 dB for our test material, reconstructed video quality is improved for loss rates above 0.25%.

RATE CONTROL ALGORITHM FOR H.264 VIDEO ENCODER

This letter proposes a rate control algorithm for H.264 video encoder, which is based on block activity and buffer state. Experimental results indicate that it has an excellent performance by providing much accurate bit rate and better coding efficiency compared with H.264. The computational complexity of the algorithm is reduced by adopting a novel block activity description method using the Sum of Absolute Difference (SAD) of 16× 16 mode, and its robustness is enhanced by introducing a feedback circuit at frame layer.

Analysis of Video Quality Variation with Different Bit Rates of H.264 Compression

The study applied a charge-coupled device (CCD) camera to send video signals to 4 DaVinciTM development boards (TMS320DM6446) of Texas Instruments (TI) to carry out H.264 Baseline Profile video coding. One of the development boards coded in the Variable Bit Rate (VBR) mode, and the other three development boards coded in the Constant Bit Rate (CBR) mode. In addition, the constant rates are 2 Mbps, 1.5 Mbps and 1 Mbps respectively. The H.264 video compression files produced by the boards were analyzed via video analysis software (CodecVisa) in the study. This software can analyze and present the compression data characteristics of the video files under each video frame, i.e., bits/MB, QP, and PSNR. In this research, the characteristics of data of each frame under four different compression conditions were compared. Their differences were calculated and averaged, and the standard deviation was evaluated. It was further connected with the values of quality characteristics and the peak signal to noise ratio (PSNR) of each frame to analyze the relation among the frame quality, the compression rate of CBR, as well as the quantitative granularity. The preliminary conclusion of the study is that the compression behaviors of CBRs in different coding sources are adjusted in a specific proportion in order to cope with the change in frame complexity. The frame will be severely damaged by a critical value during the process of network transmission while the source rate is less than the value of the characteristic.

Content-adaptive robust error concealment for packet-lossy H.264 video streaming

In this paper, we present a spatio-temporal post-processing error concealment (EC) algorithm designed initially for a H.264 video-streaming scheme over packet-lossy networks. It aims at optimizing the subjective quality of the restored video under the constraints of low delay and computational complexity, which are critical to real-time applications and portable devices having limited resources. Specifically, it takes into consideration the physical property of motion field in order to achieve more meaningful perceptual video quality, in addition to the improved objective PSNR. Further, a simple bilinear spatial interpolation approach is combined with the improved boundary-match (B-M) based temporal EC approach according to texture and motion activity analysis. Finally, we propose a low complexity temporal EC method based on motion vector interpolation as a replacement of the B-M based approach in the scheme under low-computation requirement, or as a complement to further improve the scheme's performance in applications having enough computation resources. Extensive experiments demonstrated that the proposal features not only better reconstruction, objectively and subjectively, than JM benchmark, but also robustness to different video sequences.

Reversible Data Hiding Based on Run-Level Coding in H.264/AVC Video Streams

This paper presents a reversible data hiding(RDH)method,which is designed by combining histogram modification(HM)with run-level coding in H.264/advanced video coding(AVC).In this scheme,the run-level is changed for embedding data into H.264/AVC video sequences.In order to guarantee the reversibility of the proposed scheme,the last nonzero quantized discrete cosine transform(DCT)coefficients in embeddable 4×4 blocks are shifted by the technology of histogram modification.The proposed scheme is realized after quantization and before entropy coding of H.264/AVC compression standard.Therefore,the embedded information can be correctly extracted at the decoding side.Peak-signal-noise-to-ratio(PSNR)and Structure similarity index(SSIM),embedding payload and bit-rate variation are exploited to measure the performance of the proposed scheme.Experimental results have shown that the proposed scheme leads to less SSIM variation and bit-rate increase.

H.264/AVC error resilience tools suitable for 3G mobile video services

The emergence of third generation mobile system (3G) makes video transmission in wireless environment possible, and the latest 3GPP/3GPP2 standards require 3G terminals support H.264/AVC. Due to high packet loss rate in wireless envi- ronment, error resilience for 3G terminals is necessary. Moreover, because of the hardware restrictions, 3G mobile terminals support only part of H.264/AVC error resilience tool. This paper analyzes various error resilience tools and their functions, and presents 2 error resilience strategies for 3G mobile streaming video services and mobile conversational services. Performances of the proposed error resilience strategies were tested using off-line common test conditions. Experiments showed that the proposed error resilience strategies can yield reasonably satisfactory results.

Very Low Bit-Rate Video Coding by Combining H.264/AVC Standard and 2-D Discrete Wavelet Transform

In this paper, we propose a new method for very low bit-rate video coding that combines H.264/AVC standard and two-dimensional discrete wavelet transform. In this method, first a two dimensional wavelet transform is applied on each video frame independently to extract the low frequency components for each frame and then the low frequency parts of all frames are coded using H.264/AVC codec. On the other hand, the high frequency parts of the video frames are coded by Run Length Coding algorithm, after applying a threshold to neglect the low value coefficients. Experiments show that our proposed method can achieve better rate-distortion performance at very low bit-rate applications below 16 kbits/s compared to applying H.264/AVC standard directly to all frames. Applications of our proposed video coding technique include video telephony, video-conferencing, transmitting or receiving video over half-rate traffic channels of GSM networks.

H.264/AVC码率控制现状与发展

作为视频通信中非常重要的关键技术之一,码率控制用于调整视频码流以满足带宽受限的条件,能够直接影响视频编码器输出码率的稳定性和保证视频质量。首先描述码率控制问题,给出码率控制算法的分类准则;然后对众多的H.264/先进视频编码(advanced video coding,AVC)码率控制算法根据应用目的进行具体描述;最后从适用标准和应用目的两个方面,详细指出码率控制技术今后的研究方向。

一种基于H.264/AVC的视频可逆脆弱水印算法

结合H.264压缩编码标准的特性,该文提出一种新的基于H.264/AVC的视频可逆脆弱水印算法。算法先计算当前宏块预测残差块量化的离散余弦变换(DCT)系数的哈希值生成认证码,再把认证码作为水印信息嵌入到下一个相邻宏块活性最大的4′4块的最后一个非零量化DCT系数中。在解码端,通过比较认证码和提取的水印信息进行视频数据完整性的认证。实验结果表明,该算法对视频质量和码率的影响较小,并且能对认证通过的视频数据进行还原和对认证失败的视频Ⅰ帧遭篡改区域进行有效的定位。

基于3G和H.264技术的无线视频监控系统

针对网络视频监控设备的实际应用需求,融合视频压缩、嵌入式系统和无线通信等相关技术,设计实现了基于3G技术的H.264无线视频监控系统。该监控系统实现了视频数据的采集、压缩与网络传输以及编解码等功能。由于H.264标准中码率控制策略过于强调通用性而没有考虑无线网络的误码率高、抖动性大以及嵌入式终端的处理能力有限的因素,本系统在实现了H.264标准中码率控制策略的基础上进行了优化。实验表明,在码率没有明显增加的情况下,图像PSNR值有所提高,从而较好地实现了码率控制效果。

基于H.264视频编码技术的研究

介绍和分析了H .2 6 4采用的新编码技术 ,诸如 1 /4和 1 /8像素精度运动估计 ,可变大小的图像分块 ,多参考帧 ,新的熵编码算法等 .新编码技术的采用使H .2 6 4的编码性能得到大幅提升 ;通过与H .2 6 3编码模型的实验性能对比测试 ,比较分析了H .2 6

基于纹理特征的H.264/AVC顽健视频水印算法

在分析现有视频水印算法的基础上,结合H.264压缩编码标准的特性,提出了一种新的基于纹理特征的视频顽健水印算法。算法先对当前帧4×4块进行整数离散余弦变换,判断其是否是纹理块,再采用能量差的方式自适应选择系数嵌入水印。实验结果表明,该算法对视频质量和码率的影响较小,并且能有效抵抗高斯噪声、低通滤波、重编码等常见的视频水印攻击。

基于工业以太网的H.264煤矿视频监控系统

在分析视频监控系统网络化趋势和实时性要求的基础上,采用DSP TMS320C6416和ARM微控制器,设计并实现了支持煤矿井下工业以太网传输的嵌入式H.264视频编码器。给出了系统结构原理及硬件设计,实现了DSP编码算法和面向RTP/UDP/IP的NAL接口。测试表明,系统能够进行高质量的视频网络化传输。

H.264变换编码和量化算法的研究

H.264是ITU和ISO联合制定的新一代视频编码标准,在多方面做出了改进。H.264标准中采用了4×4块的整数变换编码算法,有效地降低了编解码的运算量,且不存在反变换的匹配误差,精度更高。该文详细分析了整数变换编码的构造原理和H.264标准中先后采用的两种整数变换编码算法,阐述了与变换编码相关的量化过程。实验结果证明新的整数变换编码算法能够有效地提高编解码系统的整体性能。