Plasma in a typically elongated cross-section tokamak （for example, EAST） is inherently unstable against vertical displacement. When plasma loses the vertical position control, it moves downward or upward, leading t...Plasma in a typically elongated cross-section tokamak （for example, EAST） is inherently unstable against vertical displacement. When plasma loses the vertical position control, it moves downward or upward, leading to disruption, and a large halo current is generated helically in EAST typically in the scrape-off layer. When flowing into the vacuum vessel through in-vessel components, the halo current will give rise to a large J × B force acting on the vessel and the in-vessel components. In EAST VDE experiment, part of the eddy current is measured in halo sensors, due to the large loop voltage. Primary experimental data demonstrate that the halo current first lands on the outer plate and then flows clockwise, and the analysis of the information indicates that the maximum halo current estimated in EAST is about 0.4 times the plasma current and the maximum value of TPF × Ih/Ip0 is 0.65, furthermore Ih/Ipo and TPF × Ih/Ipo tend to increase with the increase of Ip0. The test of the strong gas injection system shows good success in increasing the radiated power, which may be effective in reducing the halo current.展开更多
The study of controlling high-current proton beam halo-chaos has become a key concerned issue for manyimportant applications. In this paper, time-delayed feedback control method is proposed for beam halo-chaos. Partic...The study of controlling high-current proton beam halo-chaos has become a key concerned issue for manyimportant applications. In this paper, time-delayed feedback control method is proposed for beam halo-chaos. Particle incell simulation results show that the method is very effective and has some advantages for high-current beam experimentsand engineering.展开更多
A backstepping control method is proposed for controlling beam halo-chaos in the periodic focusing channels （PFCs） of high-current ion accelerator. The analysis and numerical results show that the method, via adjust...A backstepping control method is proposed for controlling beam halo-chaos in the periodic focusing channels （PFCs） of high-current ion accelerator. The analysis and numerical results show that the method, via adjusting an exterior magnetic field, is effective to control beam halo chaos with five types of initial distribution ion beams, all statistical quantities of the beam halo-chaos are largely reduced, and the uniformity of ion beam is improved. This control method has an important value of application, for the exterior magnetic field can be easily adjusted in the periodical magnetic focusing channels in experiment.展开更多
Dual material gate SOI MOSFET with asymmetrical halo can suppress short channel effect and increase carriers transport efficiency. The analytical model of its subthreshold drain current is derived based on the explici...Dual material gate SOI MOSFET with asymmetrical halo can suppress short channel effect and increase carriers transport efficiency. The analytical model of its subthreshold drain current is derived based on the explicit solution of two-dimensional Poisson’s equation in the depletion region. The model takes into consideration the channel length modulation effect and the contribution of the back channel current component. Its validation is verified by comparision with two dimensional device simulator MEDICI.展开更多
Numerical simulation approaches are developed to compute the electromagnetic forces on the EAST vacuum vessel during major disruptions and vertical displacement events, with the halo current also considered. The finit...Numerical simulation approaches are developed to compute the electromagnetic forces on the EAST vacuum vessel during major disruptions and vertical displacement events, with the halo current also considered. The finite element model built with ANSYS includes the vacuum vessel, the plasma facing components and their support structure, and the toroidal and poloidal field coils. The numerical methods are explained to convince of its validity. The eddy current induced by the magnetic flux variation and the conducting current caused by the halo current are also presented for discussion. The electromagnetic forces resulting from the numerical simulation are proven to be useful for structure design optimization. Similar methods can be applied in the upgrades of the EAST device.展开更多
基金supported by the National Magnetic Confinement Fusion Science Program of China(Grant Nos.2014GB103000 and 2013GB102000)the National Natural Science Foundation of China(Grant No.11205199)
文摘Plasma in a typically elongated cross-section tokamak （for example, EAST） is inherently unstable against vertical displacement. When plasma loses the vertical position control, it moves downward or upward, leading to disruption, and a large halo current is generated helically in EAST typically in the scrape-off layer. When flowing into the vacuum vessel through in-vessel components, the halo current will give rise to a large J × B force acting on the vessel and the in-vessel components. In EAST VDE experiment, part of the eddy current is measured in halo sensors, due to the large loop voltage. Primary experimental data demonstrate that the halo current first lands on the outer plate and then flows clockwise, and the analysis of the information indicates that the maximum halo current estimated in EAST is about 0.4 times the plasma current and the maximum value of TPF × Ih/Ip0 is 0.65, furthermore Ih/Ipo and TPF × Ih/Ipo tend to increase with the increase of Ip0. The test of the strong gas injection system shows good success in increasing the radiated power, which may be effective in reducing the halo current.
基金The project supported by National Natural Science Foundation of China under Grant Nos.10247005,70071047,and 19875080
文摘The study of controlling high-current proton beam halo-chaos has become a key concerned issue for manyimportant applications. In this paper, time-delayed feedback control method is proposed for beam halo-chaos. Particle incell simulation results show that the method is very effective and has some advantages for high-current beam experimentsand engineering.
基金The project supported by the Key Projects of National Natural Science Foundation of China under Grant No. 70431002 and National Natural Science Foundation of China under Grants Nos. 70371068 and 10247005
基金Project supported by the Natural Science Foundation of Guangxi Province,China (Grant No 0640033)
文摘A backstepping control method is proposed for controlling beam halo-chaos in the periodic focusing channels （PFCs） of high-current ion accelerator. The analysis and numerical results show that the method, via adjusting an exterior magnetic field, is effective to control beam halo chaos with five types of initial distribution ion beams, all statistical quantities of the beam halo-chaos are largely reduced, and the uniformity of ion beam is improved. This control method has an important value of application, for the exterior magnetic field can be easily adjusted in the periodical magnetic focusing channels in experiment.
基金This work was supported by the National Natural Science Foundation of China (No60472003)
文摘Dual material gate SOI MOSFET with asymmetrical halo can suppress short channel effect and increase carriers transport efficiency. The analytical model of its subthreshold drain current is derived based on the explicit solution of two-dimensional Poisson’s equation in the depletion region. The model takes into consideration the channel length modulation effect and the contribution of the back channel current component. Its validation is verified by comparision with two dimensional device simulator MEDICI.
基金supported by National Natural Science Foundation of China(No.11202207) Hefei Institutes of Physical Science,CAS Innovation Foundation(Y15FZ10133)
文摘Numerical simulation approaches are developed to compute the electromagnetic forces on the EAST vacuum vessel during major disruptions and vertical displacement events, with the halo current also considered. The finite element model built with ANSYS includes the vacuum vessel, the plasma facing components and their support structure, and the toroidal and poloidal field coils. The numerical methods are explained to convince of its validity. The eddy current induced by the magnetic flux variation and the conducting current caused by the halo current are also presented for discussion. The electromagnetic forces resulting from the numerical simulation are proven to be useful for structure design optimization. Similar methods can be applied in the upgrades of the EAST device.
