This paper first discusses the operating principle of instantaneous reactive power theory. Then, the theory is introduced into shunt active power filter and its control scheme is studied. Finally, Matlab/Simulink powe...This paper first discusses the operating principle of instantaneous reactive power theory. Then, the theory is introduced into shunt active power filter and its control scheme is studied. Finally, Matlab/Simulink power system toolbox is used to simulate the system. In the simulation model, as the most common harmonic source, 3-phase thyristor bridge rectifier circuit is constructed. The simulation results before and after the shunt active filter was switched to the system corresponding to different firing angles of the thyristors are presented and analyzed, which demonstrate the practicability and reliability of the proposed shunt active filter scheme.展开更多
For three phase four-wire active power filters （APFs）, several typical power theories and corresponding current reference generation strategies are induced, p-q, d-q, unify power factor （UPF） and instantaneous act...For three phase four-wire active power filters （APFs）, several typical power theories and corresponding current reference generation strategies are induced, p-q, d-q, unify power factor （UPF） and instantaneous active current （IAC） methods are analyzed and compared with each other. The interpretation of active and reactive currents in non-sinusoidal and unbalanced three-phase four-wire systems is given based on the generalized instantaneous reactive power theory. The performance and the characteristic are evaluated, and the application conditions of current reference generation strategies are concluded. Simulation results under different source voltages and loads verify the evaluation result.展开更多
Power sharing among multiterminal high voltage direct current terminals(MT-HVDC)is mainly developed based on a priority or sequential manners,which uses to prevent the problem of overloading due to a predefined contro...Power sharing among multiterminal high voltage direct current terminals(MT-HVDC)is mainly developed based on a priority or sequential manners,which uses to prevent the problem of overloading due to a predefined controller coefficient.Furthermore,fixed power sharing control also suffers from an inability to identify power availability at a rectification station.There is a need for a controller that ensures an efficient power sharing among the MT-HVDC terminals,prevents the possibility of overloading,and utilizes the available power sharing.A new adaptive wireless control for active power sharing among multiterminal(MT-HVDC)systems,including power availability and power management policy,is proposed in this paper.The proposed control strategy solves these issues and,this proposed controller strategy is a generic method that can be applied for unlimited number of converter stations.The rational of this proposed controller is to increase the system reliability by avoiding the necessity of fast communication links.The test system in this paper consists of four converter stations based on three phase-two AC voltage levels.The proposed control strategy for a multiterminal HVDC system is conducted in the power systems computer aided design/electromagnetic transient design and control(PSCAD/EMTDC)simulation environment.The simulation results significantly show the flexibility and usefulness of the proposed power sharing control provided by the new adaptive wireless method.展开更多
高压直流(high voltage direct current,HVDC)换流器具有一定的动态无功调节能力,充分利用换流站的无功调节能力,可显著改善HVDC系统的稳定性能。文中研究了HVDC系统稳态运行时的无功功率可调节能力,分析了有功功率和无功功率相互耦合...高压直流(high voltage direct current,HVDC)换流器具有一定的动态无功调节能力,充分利用换流站的无功调节能力,可显著改善HVDC系统的稳定性能。文中研究了HVDC系统稳态运行时的无功功率可调节能力,分析了有功功率和无功功率相互耦合的特性,以国际大电网(conference International des grands reseaux electriques,CIGRE)的HVDC标准测试模型和贵广Ⅱ直流输电工程模型为算例,对稳态工况的直流电流可运行范围进行了解析,进而求出整流、逆变两侧的无功功率可调节能力,并将其应用在无功控制中。研究发现,CIGRE的HVDC标准测试模型对于容性的无功功率和感性的无功功率调节能力相近,而贵广Ⅱ直流输电工程模型对感性无功的调节能力远大于对容性无功的调节能力。在电磁暂态仿真程序PSCAD/EMTDC中验证了无功功率可调节能力的正确性和应用价值。展开更多
对于采用模块化多电平换流器技术的柔性直流(modular multilevel converter based high voltage direct current,MMC-HVDC)输电系统,在不对称电网电压下,阀侧电流失衡及功率波动会对其稳定运行会产生负面影响。为解决该问题,通过分析不...对于采用模块化多电平换流器技术的柔性直流(modular multilevel converter based high voltage direct current,MMC-HVDC)输电系统,在不对称电网电压下,阀侧电流失衡及功率波动会对其稳定运行会产生负面影响。为解决该问题,通过分析不对称电网电压条件下MMC内部动态特性,提出一种MMC控制优化方法,可以实现抑制交流电流失衡、瞬时功率波动以及稳定系统直流电压、电流的多目标控制;同时,构建一种基于多复系数滤波器的自适应锁相环,在电网电压不对称工况下实现了对电网相位的快速跟踪,从而提高了系统控制的精度。最后,基于RT-LAB5600实时在线仿真平台,搭建31电平MMC-HVDC仿真模型,验证了所提控制优化方法的有效性。展开更多
文摘This paper first discusses the operating principle of instantaneous reactive power theory. Then, the theory is introduced into shunt active power filter and its control scheme is studied. Finally, Matlab/Simulink power system toolbox is used to simulate the system. In the simulation model, as the most common harmonic source, 3-phase thyristor bridge rectifier circuit is constructed. The simulation results before and after the shunt active filter was switched to the system corresponding to different firing angles of the thyristors are presented and analyzed, which demonstrate the practicability and reliability of the proposed shunt active filter scheme.
文摘For three phase four-wire active power filters （APFs）, several typical power theories and corresponding current reference generation strategies are induced, p-q, d-q, unify power factor （UPF） and instantaneous active current （IAC） methods are analyzed and compared with each other. The interpretation of active and reactive currents in non-sinusoidal and unbalanced three-phase four-wire systems is given based on the generalized instantaneous reactive power theory. The performance and the characteristic are evaluated, and the application conditions of current reference generation strategies are concluded. Simulation results under different source voltages and loads verify the evaluation result.
文摘Power sharing among multiterminal high voltage direct current terminals(MT-HVDC)is mainly developed based on a priority or sequential manners,which uses to prevent the problem of overloading due to a predefined controller coefficient.Furthermore,fixed power sharing control also suffers from an inability to identify power availability at a rectification station.There is a need for a controller that ensures an efficient power sharing among the MT-HVDC terminals,prevents the possibility of overloading,and utilizes the available power sharing.A new adaptive wireless control for active power sharing among multiterminal(MT-HVDC)systems,including power availability and power management policy,is proposed in this paper.The proposed control strategy solves these issues and,this proposed controller strategy is a generic method that can be applied for unlimited number of converter stations.The rational of this proposed controller is to increase the system reliability by avoiding the necessity of fast communication links.The test system in this paper consists of four converter stations based on three phase-two AC voltage levels.The proposed control strategy for a multiterminal HVDC system is conducted in the power systems computer aided design/electromagnetic transient design and control(PSCAD/EMTDC)simulation environment.The simulation results significantly show the flexibility and usefulness of the proposed power sharing control provided by the new adaptive wireless method.
文摘高压直流(high voltage direct current,HVDC)换流器具有一定的动态无功调节能力,充分利用换流站的无功调节能力,可显著改善HVDC系统的稳定性能。文中研究了HVDC系统稳态运行时的无功功率可调节能力,分析了有功功率和无功功率相互耦合的特性,以国际大电网(conference International des grands reseaux electriques,CIGRE)的HVDC标准测试模型和贵广Ⅱ直流输电工程模型为算例,对稳态工况的直流电流可运行范围进行了解析,进而求出整流、逆变两侧的无功功率可调节能力,并将其应用在无功控制中。研究发现,CIGRE的HVDC标准测试模型对于容性的无功功率和感性的无功功率调节能力相近,而贵广Ⅱ直流输电工程模型对感性无功的调节能力远大于对容性无功的调节能力。在电磁暂态仿真程序PSCAD/EMTDC中验证了无功功率可调节能力的正确性和应用价值。
文摘对于采用模块化多电平换流器技术的柔性直流(modular multilevel converter based high voltage direct current,MMC-HVDC)输电系统,在不对称电网电压下,阀侧电流失衡及功率波动会对其稳定运行会产生负面影响。为解决该问题,通过分析不对称电网电压条件下MMC内部动态特性,提出一种MMC控制优化方法,可以实现抑制交流电流失衡、瞬时功率波动以及稳定系统直流电压、电流的多目标控制;同时,构建一种基于多复系数滤波器的自适应锁相环,在电网电压不对称工况下实现了对电网相位的快速跟踪,从而提高了系统控制的精度。最后,基于RT-LAB5600实时在线仿真平台,搭建31电平MMC-HVDC仿真模型,验证了所提控制优化方法的有效性。
