期刊文献+
共找到80篇文章
< 1 2 4 >
每页显示 20 50 100
不同赋存形式H_(2)映震特征及机理分析
1
作者 李娜 向阳 +1 位作者 李新勇 汪成国 《地震》 CSCD 北大核心 2024年第3期138-155,共18页
乌鲁木齐04泉水中溶解气H_(2)和阿克苏断层土壤气H_(2)监测点均属新疆地震监测预报评估A类。本文以二者为研究对象,分析不同赋存形式H_(2)浓度的动态变化特征;利用R值评分方法和Molchan图表法对H_(2)浓度进行映震效能检验,并提取异常指... 乌鲁木齐04泉水中溶解气H_(2)和阿克苏断层土壤气H_(2)监测点均属新疆地震监测预报评估A类。本文以二者为研究对象,分析不同赋存形式H_(2)浓度的动态变化特征;利用R值评分方法和Molchan图表法对H_(2)浓度进行映震效能检验,并提取异常指标;探讨和分析不同赋存形式H_(2)的映震机理。结论如下:乌鲁木齐04泉水中溶解气H_(2)浓度受气象因素影响较小,而阿克苏断层土壤气H_(2)浓度受气压和气温双重影响,其中以气温影响为主。R值评分方法和Molchan图表法检验显示,两个监测点均具有较好的短期预测效能。H_(2)浓度测项具有较好的短临预测效能,这得益于H_(2)的物理化学性质稳定且迁移速度极快。 展开更多
关键词 地震监测 h_(2) 影响因素 映震效能 异常指标 机理
下载PDF
湿气环境中CO_(2)-H_(2)S在α-Fe(110)密排面上吸附与点蚀机理研究
2
作者 李金灵 马文骏 +2 位作者 朱世东 屈撑囤 付安庆 《表面技术》 EI CAS CSCD 北大核心 2024年第20期82-93,共12页
目的从微观尺度探究CO_(2)-H_(2)S(CO_(2)和H_(2)S共存)在湿气管道顶部的吸附特性,进而揭示点蚀机理。方法基于密度泛函理论的第一性原理,利用Materials Studio构建CO_(2)、H_(2)S和CO_(2)-H_(2)S在α-Fe(110)密排面的吸附模型,对CO_(2)... 目的从微观尺度探究CO_(2)-H_(2)S(CO_(2)和H_(2)S共存)在湿气管道顶部的吸附特性,进而揭示点蚀机理。方法基于密度泛函理论的第一性原理,利用Materials Studio构建CO_(2)、H_(2)S和CO_(2)-H_(2)S在α-Fe(110)密排面的吸附模型,对CO_(2)、H_(2)S和CO_(2)-H_(2)S在α-Fe(110)面的吸附能、局域态密度、分波态密度和差分电荷密度进行仿真;利用高温高压釜模拟CO_(2)-H_(2)S-Cl^(-)腐蚀环境,分析L360钢在湿气环境中的腐蚀行为;最后,揭示含Cl^(-)湿气管道顶部CO_(2)-H_(2)S吸附机制与点蚀机理。结果CO_(2)、H_(2)S、CO_(2)-H_(2)S及CO_(2)-H_(2)S-Cl^(-)在最稳定位置时的吸附能分别为-4.065、-3.961、-8.538、-12.775e V,表明相较于CO_(2)与H_(2)S单独吸附,CO_(2)-H_(2)S在α-Fe(110)面的吸附能更负,Cl^(-)会进一步降低CO_(2)-H_(2)S的吸附能;且CO_(2)在与H_(2)S竞争环境电子中占优势;Cl^(-)会使CO_(2)-H_(2)S的局域态密度峰值降低,转移趋势为失去电子,基体和腐蚀介质的电子向着低能级跃迁释放出更多能量,进而加强了Fe与CO_(2)-H_(2)S间的化学键强度;Cl^(-)的2p轨道与Fe的3d轨道在-6.8 eV和-5.7 eV发生重叠,Cl^(-)被吸附到Fe表面并与Fe形成化学键生成氯化物,进而改变腐蚀产物膜的组分与结构,削弱产物膜的致密性和稳定性,减弱腐蚀阻抗力。在含Cl^(-)湿气的CO_(2)-H_(2)S环境中,液相中的Cl^(-)浓度升高,使L360钢的气相平均腐蚀速率逐渐增大,最高达2.935mm/a,点蚀越发严重。结论CO_(2)与H_(2)S在α-Fe(110)面吸附存在一定的协同和竞争作用,协同促进金属的腐蚀,FeCO3会优先沉积成膜,但H_(2)S会抑制FeCO3的生长,腐蚀产物以FeS为主;Cl^(-)会增强CO_(2)-H_(2)S与α-Fe(110)面间的作用力,弱化腐蚀产物膜层的保护性,进一步加速金属腐蚀、尤其是点蚀。 展开更多
关键词 CO_(2)-h_(2)S Cl^(-) 第一性原理 α-Fe(110)密排面 吸附特征 腐蚀机理
下载PDF
H_(2)S/CO_(2)共存环境中X65钢点腐蚀形成机理及预测方法
3
作者 闫伟 刘琬晴 +3 位作者 李光聪 张晨 邹子琛 Srdjan Nesic 《天然气工业》 EI CAS CSCD 北大核心 2024年第11期161-169,共9页
碳钢管材广泛应用于油气生产系统,在含CO_(2)、H_(2)S、氯离子等多种腐蚀介质共存的多相流环境中,容易发生腐蚀穿孔泄漏,可能造成管道和设备的失效,进而带来安全隐患和经济损失。目前针对H_(2)S/CO_(2)共存环境下金属腐蚀的研究主要集... 碳钢管材广泛应用于油气生产系统,在含CO_(2)、H_(2)S、氯离子等多种腐蚀介质共存的多相流环境中,容易发生腐蚀穿孔泄漏,可能造成管道和设备的失效,进而带来安全隐患和经济损失。目前针对H_(2)S/CO_(2)共存环境下金属腐蚀的研究主要集中在较高H_(2)S分压下,多种形式FeS产物的生成规律、产物膜保护特性和点蚀形成机理,很少研究极微量H_(2)S诱发点腐蚀的可能性和发生条件。为此,以X65钢为例,利用大型H_(2)S多相流腐蚀环路实验系统完成了4组测试实验和2组验证实验,研究了40℃、恒定CO_(2)分压环境下,不同H_(2)S分压对低碳钢点腐蚀行为的影响规律,并提出了一种基于热力学理论的预测方法。研究结果表明:①当H_(2)S分压高于50 Pa时,X65钢的腐蚀速率低且表现为全面腐蚀;而当H_(2)S分压低于24 Pa时,随着H_(2)S分压的逐步降低,X65钢的点腐蚀加剧,H_(2)S为2.4 Pa时的点腐蚀速率超过11 mm/a。②当H_(2)S分压极低且马基诺型FeS的过饱和度低于1时,快速形成的FeS膜不能完整覆盖金属表面,暴露表面会在电偶腐蚀的作用下,被饱和CO_(2)溶液快速腐蚀,最终导致低碳钢发生局部点腐蚀。③建立不同H_(2)S分压下低碳钢表面马基诺型FeS过饱和度边界控制曲线,可以准确预测不同条件下碳钢的点腐蚀行为。结论认为,在相关行业标准规定的H_(2)S分压下限以内,H_(2)S/CO_(2)共存环境中极微量的H_(2)S仍然可能会诱发碳钢发生点腐蚀,该认识对于H_(2)S/CO_(2)共存环境下油气管道的局部点腐蚀预测和防腐防护研发具有重要理论和现实意义。 展开更多
关键词 h_(2)S CO_(2) 共存环境 低碳钢 点腐蚀 腐蚀机理 预测方法
下载PDF
H_(2)S/CO_(2)的腐蚀机理及缓蚀体系的研究进展 被引量:1
4
作者 白玉震 苏碧云 +2 位作者 朱晓艳 侯博礼 檀银银 《化工技术与开发》 CAS 2024年第3期36-40,49,共6页
在油田开采、集输、储运、油气水处理等环节,钢材的腐蚀问题普遍存在。为了将腐蚀风险降至最低,油气田常采用多种方法进行腐蚀防护,其中添加缓蚀剂的方法最为常用。本文综述了近年来在H_(2)S/CO_(2)腐蚀环境下,利用缓蚀剂来抑制金属表... 在油田开采、集输、储运、油气水处理等环节,钢材的腐蚀问题普遍存在。为了将腐蚀风险降至最低,油气田常采用多种方法进行腐蚀防护,其中添加缓蚀剂的方法最为常用。本文综述了近年来在H_(2)S/CO_(2)腐蚀环境下,利用缓蚀剂来抑制金属表面腐蚀的研究进展,论述了CO_(2)、H_(2)S浓度、温度、pH等主控因素对腐蚀程度的影响,对各类主流缓蚀药剂如咪唑啉类缓蚀剂、聚合物类缓蚀剂、曼尼希碱缓蚀剂和有机胺类缓蚀剂的作用效果、原理及优缺点进行了归纳总结,对药剂的研究前景和发展方向进行了展望。 展开更多
关键词 油田 h_(2)S/CO_(2) 腐蚀机理 缓蚀剂 缓蚀率
下载PDF
油井管在CO_(2)/H_(2)S体系中的腐蚀行为研究进展
5
作者 李岩 朱世东 +1 位作者 李光 杨帆 《化工技术与开发》 CAS 2024年第3期26-35,共10页
CO_(2)和H_(2)S引起的腐蚀问题备受关注。CO_(2)/H_(2)S体系是导致石油管材发生腐蚀、断裂、穿孔等失效的主要原因,高温、高压、高含Cl-的“三高”井下环境以及高含硫气藏的开发环境,进一步加剧了管材的腐蚀,严重威胁井筒的安全。本文... CO_(2)和H_(2)S引起的腐蚀问题备受关注。CO_(2)/H_(2)S体系是导致石油管材发生腐蚀、断裂、穿孔等失效的主要原因,高温、高压、高含Cl-的“三高”井下环境以及高含硫气藏的开发环境,进一步加剧了管材的腐蚀,严重威胁井筒的安全。本文论述了CO_(2)和H_(2)S的腐蚀机理,概括了pH值、温度、H_(2)S分压、Cl^(-)浓度等因素对油井管腐蚀规律的影响,重点分析了CO_(2)/H_(2)S的分压比对管材CO_(2)/H_(2)S腐蚀的作用机制。结果表明,CO_(2)/H_(2)S的分压比对CO_(2)/H_(2)S体系下的腐蚀起着重要作用,不同的CO_(2)/H_(2)S分压比能够改变腐蚀过程,且对CO_(2)/H_(2)S的竞争协同机制存在一定的影响,高CO_(2)/H_(2)S分压比还会引起局部腐蚀。最后,对CO_(2)/H_(2)S体系下管材的腐蚀研究进行了展望。 展开更多
关键词 CO_(2) h_(2)S 腐蚀机理 影响因素 竞争协同
下载PDF
H_(2)O气氛下富油煤热解过程的反应分子动力学模拟
6
作者 黄淄博 刘倩如 +2 位作者 刘红 周文静 魏进家 《煤田地质与勘探》 EI CAS CSCD 北大核心 2024年第7期189-199,共11页
【目的】我国富油煤资源丰富,通过热解技术可将其转化为能源产品(化学品、气体或液体燃料等),缓解我国油气资源的对外依存程度。深入认识热解过程中的产物变化规律和反应机理,对于煤炭清洁高效转化工艺的研究至关重要。【方法】采用反... 【目的】我国富油煤资源丰富,通过热解技术可将其转化为能源产品(化学品、气体或液体燃料等),缓解我国油气资源的对外依存程度。深入认识热解过程中的产物变化规律和反应机理,对于煤炭清洁高效转化工艺的研究至关重要。【方法】采用反应分子动力学(ReaxFF MD)模拟探究富油煤(长焰煤)热解过程以及H_(2)O气氛对热解产物分布的影响和作用机制。【结果和结论】结果表明,富油煤(长焰煤)热解的温度范围为1200~2800 K,热解过程主要分为热解(1200~2000 K)和缩聚(2000~2800 K)两个阶段。在热解阶段,随着温度的升高,煤分子快速裂解,焦炭产物不断减少,焦油和气体产物不断增加;在缩聚阶段,焦油产物之间发生缩聚反应生成焦炭,同时释放小分子气体,导致焦油产物减少,焦炭和气体产物增加。因此,提高热解温度、延长热解时间可得到更多的气体产物,而提升焦油产量的关键则是抑制缩聚反应发生。在高温缩聚阶段引入H_(2)O气氛热解,结果表明,H_(2)O能够有效地促进煤分子的裂解,随着H_(2)O占比的增加,煤热解体系中C―C键减少,C―H和C―O键增加。分析二者之间的交互作用发现,煤热解产生的自由基与H_(2)O反应,促进H_(2)O分子分解,H_(2)O分解产生的H•和OH•又进一步促进煤裂解,并与煤热解产物反应,生成更多的焦油和气体。研究加深了对富油煤热解过程的理解,对煤炭资源的清洁高效利用具有一定指导意义。 展开更多
关键词 富油煤 热解 反应机理 h_(2)O气氛 反应分子动力学
下载PDF
NH_(3)-(NH_(4))_(2)SO_(4)体系隔膜电解铜电化学研究
7
作者 杨建英 唐施阳 +2 位作者 杨平 李树超 杨建广 《中国有色冶金》 CAS 北大核心 2024年第2期121-128,共8页
PCB板(印刷电路板)剪裁铣削渣中含有金属铜和铝,且塑料含量高,采用电化学溶解隔膜电积工艺可以实现铜的剥离并得到高品位阴极铜。该工艺具有流程短、电流效率高、产品纯度高等优点,具有广阔的应用前景,但其电化学机理尚不明确,本文以PC... PCB板(印刷电路板)剪裁铣削渣中含有金属铜和铝,且塑料含量高,采用电化学溶解隔膜电积工艺可以实现铜的剥离并得到高品位阴极铜。该工艺具有流程短、电流效率高、产品纯度高等优点,具有广阔的应用前景,但其电化学机理尚不明确,本文以PCB制造过程中产生的含铜固废作为阳极,采用钛板为阴极,在NH_(3)-(NH_(4))_(2)SO_(4)体系中采用隔膜电解工艺进行了一系列试验,包括不同铵盐体系、氨/硫酸铵体系中不同电极、氨/硫酸铵体系不同电解液组成的电化学行为曲线以及NH_(3)-(NH_(4))_(2)SO_(4)体系电沉积铜的控制步骤、成核机理等。结果表明,氨/硫酸铵体系中电积铜的起始还原电位最低,电积时电耗较低,且该体系中氢的析出电位均较负,可避免因析出氢气降低阴极电流效率的副反应;NH_(3)-(NH_(4))_(2)SO_(4)体系中Cu^(2+)在钛电极表面的电沉积反应为不可逆过程,且为双电子一步转移过程,控制步骤为扩散控制;Cu^(2+)在钛电极上的成核机理接近于瞬时成核。该研究成果可为NH_(3)-(NH_(4))_(2)SO_(4)体系隔膜电解铜工艺提供理论参考。 展开更多
关键词 PCB含铜废料 Nh_(3)-(Nh_(4))_(2)SO_(4)-h_(2)O体系 隔膜电解 电化学机理 成核机理 控制步骤
下载PDF
Insight into the synergistic effect of defect and strong interface coupling on ZnIn_(2)S_(4)/CoIn_(2)S_(4)heterostructure for boosting photocatalytic H_(2) evolution
8
作者 Xuehua Wang Tianyu Shi +6 位作者 Xianghu Wang Aili Song Guicun Li Lei Wang Jianfeng Huang Alan Meng Zhenjiang Li 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第5期151-161,共11页
Steering the directional carrier migration across the interface is a central mission for efficient photocatalytic reactions.In this work,an atomic-shared heterointerface is constructed between the defect-rich ZnIn_(2)... Steering the directional carrier migration across the interface is a central mission for efficient photocatalytic reactions.In this work,an atomic-shared heterointerface is constructed between the defect-rich ZnIn_(2)S_(4)(HVs-ZIS)and CoIn_(2)S_(4)(CIS)via a defect-guided heteroepitaxial growth strategy.The strong interface coupling induces adequate carriers exchanging passageway between HVs-ZIS and CIS,enhancing the internal electric field(IEF)in the ZnIn_(2)S_(4)/CoIn_(2)S_(4)(HVs-ZIS/CIS)heterostructure.The defect structure in HVs-ZIS induces an additional defect level,improving the separation efficiency of photocarriers.Moreover,promoted by the IEF and intimate heterointerface,photogenerated electrons trapped by the defect level can migrate to the valence band of CIS,contributing to massive photogenerated electrons with intense reducibility in HVs-ZIS/CIS.Consequently,the HVs-ZIS/CIS heterostructure performs a boosted H_(2)evolution activity of 33.65 mmol g^(-1)h^(-1).This work highlights the synergistic effects of defect and strong interface coupling in regulating carrier transfer and paves a brave avenue for constructing efficient heterostructure photocatalysts. 展开更多
关键词 Defect-guided heteroepitaxial growth heterointerface coupling Photocatalytic h_(2)evolution mechanism hVs-ZIS/CIS
下载PDF
A critical review towards the causes of the iron-based catalysts deactivation mechanisms in the selective oxidation of hydrogen sulfide to elemental sulfur from biogas
9
作者 Mostafa Tarek Janaina S.Santos +4 位作者 Victor Márquez Mohammad Fereidooni Mohammad Yazdanpanah Supareak Praserthdam Piyasan Praserthdam 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第3期388-411,I0010,共25页
Hydrogen sulfide(H_(2)S) not only presents significant environmental concerns but also induces severe corrosion in industrial equipment,even at low concentrations.Among various technologies,the selective oxidation of ... Hydrogen sulfide(H_(2)S) not only presents significant environmental concerns but also induces severe corrosion in industrial equipment,even at low concentrations.Among various technologies,the selective oxidation of hydrogen sulfide(SOH_(2)S) to elemental sulfur(S) has emerged as a sustainable and environmentally friendly solution.Due to its unique properties,iron oxide has been extensively investigated as a catalyst for SOH_(2)S;however,rapid deactivation has remained a significant drawback.The causes of iron oxide-based catalysts deactivation mechanisms in SOH_(2)S,including sulfur or sulfate deposition,the transformation of iron species,sintering and excessive oxygen vacancy formation,and active site loss,are thoroughly examined in this review.By focusing on the deactivation mechanisms,this review aims to provide valuable insights into enhancing the stability and efficiency of iron-based catalysts for SOH_(2)S. 展开更多
关键词 Selective oxidation of h_(2)S Iron-based Catalysts mechanism of deactivation Sulfur or sulfate deposition Transformation of iron species Sintering SDG 7
下载PDF
Investigation on the mechanism of Qiangxinhuoli prescription in the treatment of chronic heart failure based on p38-MAPK signaling pathway
10
作者 Di Guo Qiu-Han Zheng +2 位作者 Di Wang Zhi Pan Xiao-Ling Shang 《Traditional Medicine Research》 2024年第7期13-24,共12页
Background:The aim of this study is to investigate the mechanism of action underlying the therapeutic effects of the national patent Chinese medicine compound“Qiangxinhuoli prescription(QXHLF)”on chronic heart failu... Background:The aim of this study is to investigate the mechanism of action underlying the therapeutic effects of the national patent Chinese medicine compound“Qiangxinhuoli prescription(QXHLF)”on chronic heart failure(CHF).Methods:In vitro,the H_(9)C_(2) cell model was induced by ANGII,and cell proliferation and related protein expression were detected by Cell Counting Kit-8 and Western blot.In vivo,A rat model of CHF was prepared by ligation of the left anterior descending coronary artery.The effects of QXHLF on cardiac function in CHF rats were evaluated by cardiac index,hemodynamic changes,enzyme-linked immunosorbent assay,hematoxylin-eosin staining,immunohistochemistry,Western blot and RT-PCR.The expression of pro-apoptotic factors and anti-apoptotic factors,as well as TGFβ1,p-p38,TAK 1 mRNA,and protein,were detected.Results:In vitro,QXHLF has a significant inhibitory effect on the proliferation of H_(9)C_(2) cells.QXHLF can reduce the expression levels of TAK 1,TGFβ1,p-p38,Caspase3 and BAX proteins in H_(9)C_(2) cells,and increase the expression level of BCL_(2) protein.In vivo,QXHLF has the potential to increase left ventricular systolic pressure,m aximum rate of change in left ventricular pressure while decreasing left ventricular end diastolic pressure,and inhibiting the serum levels of brain natriuretic peptide.Moreover,QXHLF exhibits significant improvements in the pathological alterations of myocardial cells and fibers in CHF rats,leading to enhanced myocardial tissue morphology and notable advantages in combating myocardial fibrosis.QXHLF can reduce the levels of BAX and Caspase3 and up-regulate the expression of BCL_(2),thereby inhibiting cardiomyocyte apoptosis.Furthermore,QXHLF demonstrates inhibitory effects on the mRNA and protein expression levels of TGFβ_(1),TAK_(1),and p-p38 in the heart tissue of the CHF rat model.Conclusion:These findings indicate that QXHLF has a therapeutic effect on CHF by inhibiting the p38-MAPK signaling pathway,reducing myocardial fibrosis,preventing apoptosis,inhibiting cell proliferation,and restoring myocardial injury. 展开更多
关键词 chronic heart failure Qiangxinhuoli prescription p38MAPK pathway h_(9)C_(2) Action mechanism
下载PDF
Experimental study on thermal and mechanical properties of tailings-based cemented paste backfill with CaCl_(2)·6H_(2)O/expanded vermiculite shape stabilized phase change materials 被引量:2
11
作者 Xiaoyan Zhang Tianrun Cao +3 位作者 Lang Liu Baoyun Bu Yaping Ke Qiangqiang Du 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2023年第2期250-259,共10页
CaCl_(2)·6H_(2)O/expanded vermiculite shape stabilized phase change materials(CEV)was prepared by atmospheric impregnation method.Using gold mine tailings as aggregate of cemented paste backfill(CPB)material,the ... CaCl_(2)·6H_(2)O/expanded vermiculite shape stabilized phase change materials(CEV)was prepared by atmospheric impregnation method.Using gold mine tailings as aggregate of cemented paste backfill(CPB)material,the CPB with CEV added was prepared,and the specific heat capacity,thermal conductivity,and uniaxial compressive strength(UCS)of CPB with different cement-tailing ratios and CEV addition ratios were tested,the influence of the above variables on the thermal and mechanical properties of CPB was analyzed.The results show that the maximum encapsulation capacity of expanded vermiculite for CaCl_(2)·6H_(2)O is about 60%,and the melting and solidification enthalpies of CEV can reach 98.87 J/g and 97.56 J/g,respectively.For the CPB without CEV,the specific heat capacity,thermal conductivity,and UCS decrease with the decrease of cement-tailing ratio.For the CPB with CEV added,with the increase of CEV addition ratio,the specific heat capacity increases significantly,and the sensible heat storage capacity and latent heat storage capacity can be increased by at least 10.74%and 218.97%respectively after adding 12%CEV.However,the addition of CEV leads to the increase of pores,and the thermal conductivity and UCS both decrease with the increase of CEV addition.When cement-tailing ratio is 1:8 and 6%,9%,and 12%of CEV are added,the 28-days UCS of CPB is less than 1 MPa.Considering the heat storage capacity and cost price of backfill,the recommended proportion scheme of CPB material presents cement-tailing ratio of 1:6 and 12%CEV,and the most recommended heat storage/release temperature cycle range of CPB with added CEV is from 20 to 40℃.This work can provide theoretical basis for the utilization of heat storage backfill in green mines. 展开更多
关键词 CaCl_(2)·6h_(2)O/expanded vermiculite shape stabilized phase change materials cemented paste backfill thermal property mechanical property
下载PDF
海上热采油田H_(2)S成因机理研究
12
作者 尹洪超 张伟森 +1 位作者 冉兆航 张莹 《化学工程师》 CAS 2024年第6期46-50,共5页
随着我国海上稠油油田的深入开发,热采蒸汽驱规模逐步扩大,相应的H_(2)S系列问题也愈发凸显。H_(2)S不仅危害人的健康,还能腐蚀金属设备,严重影响生产的安全平稳运行。本文以L稠油油田为例,在调研目标油田储层概况和H_(2)S生成情况的基... 随着我国海上稠油油田的深入开发,热采蒸汽驱规模逐步扩大,相应的H_(2)S系列问题也愈发凸显。H_(2)S不仅危害人的健康,还能腐蚀金属设备,严重影响生产的安全平稳运行。本文以L稠油油田为例,在调研目标油田储层概况和H_(2)S生成情况的基础上,通过黄金管热模拟实验、色谱分析等方式,探究海上热采油田的H_(2)S的成因机理。实验结果表明,L稠油油田H_(2)S生成的物源主要为原油和地层水,岩屑能够起到催化作用;温度和时间是影响H_(2)S的主控因素,温度越高、时间越长,生成的H_(2)S量越高;L油田H_(2)S生成的主要原因是发生了地层水热裂解、硫酸盐还原反应。该研究成果能够为其他热采油田的H_(2)S成因研究提供探索思路,为油田H_(2)S治理指明方向。 展开更多
关键词 热采油田 h_(2)S 黄金管热模拟实验 物源 温度 机理
下载PDF
Theoretical study of reduction mechanism of Fe_(2)O_(3) by H_(2) during chemical looping combustion 被引量:2
13
作者 Feng Liu Jing Liu +1 位作者 Yu Li Ruixue Fang 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2021年第9期175-183,共9页
An atomic-level insight into the H_(2)adsorption and oxidation on the Fe_(2)O_(3)surface during chemicallooping combustion was provided on the basis of density functional theory calculations in this study.The results ... An atomic-level insight into the H_(2)adsorption and oxidation on the Fe_(2)O_(3)surface during chemicallooping combustion was provided on the basis of density functional theory calculations in this study.The results indicated that H_(2)molecule most likely chemisorbs on the Fe_(2)O_(3)surface in a dissociative mode.The decomposed H atoms then could adsorb on the Fe and O atoms or on the two neighboring O atoms of the surface.In particular,the H_(2)molecule adsorbed on an O top site could directly form H_(2)O precursor on the O_(3)-terminated surface.Further,the newly formed H-O bond was activated,and the H atom could migrate from one O site to another,consequently forming the H_(2)O precursor.In the H_(2)oxidation process,the decomposition of H_(2)molecule was the rate-determining step for the O_(3)-terminated surface with an activation energy of 1.53 eV.However,the formation of H_(2)O was the ratedetermining step for the Fe-terminated surface with an activation energy of 1.64 eV.The Feterminated surface is less energetically favorable for H_(2)oxidation than that the O_(3)-terminated surface owing to the steric hindrance of Fe atom.These results provide a fundamental understanding about the reaction mechanism of Fe_(2)O_(3)with H_(2),which is helpful for the rational design of Fe-based oxygen carrier and the usage of green energy resource such as H_(2). 展开更多
关键词 Chemical-looping combustion Fe_(2)O_(3)oxygen carrier h_(2)adsorption Density functional theory Reaction mechanism
下载PDF
H_2 generation kinetics/thermodynamics and hydrolysis mechanism of high-performance La-doped Mg-Ni alloys in Na Cl solution——A large-scale and quick strategy to get hydrogen
14
作者 Xiaojiang Hou Hongchang Shi +7 位作者 Lu Yang Kaiming Hou Yi Wang Lei Feng Guoquan Suo Xiaohui Ye Li Zhang Yanling Yang 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2021年第3期1068-1083,共16页
In this work,La-doped Mg-Ni multiphase alloys were prepared by resistance melting furnace(RMF)and then modified by high-energy ball milling(HEBM).The hydrolysis H_(2) generation kinetics/thermodynamics of prepared all... In this work,La-doped Mg-Ni multiphase alloys were prepared by resistance melting furnace(RMF)and then modified by high-energy ball milling(HEBM).The hydrolysis H_(2) generation kinetics/thermodynamics of prepared alloys in Na Cl solutions have been investigated with the help of nonlinear and linear fitting by Avrami-Erofeev and Arrhenius equations.Combining the microstructure information before and after hydrolysis and thermodynamics fitting results,the hydrolysis H_(2) generation mechanism based on nucleation&growth has been elaborated.The final H_(2) generation capacities of 0La,5La,10La and 15 La alloys are 677,653,641 and 770 m L·g^(-1)H_(2) in 240 min at291 K,respectively.While,the final H_(2) generation capacities of HEBM 0La,5La,10La and 15 La alloys are 632,824,611 and 653 m L·g^(-1)H_(2) in 20 min at 291 K,respectively.The as-cast 15La alloy and HEMB 5La alloy present the best H_(2) production rates and final H_(2) production capacities,especially the HEBM 5La can rapidly achieve high H_(2) generation capacity(670 and 824 m L·g^(-1)H_(2) )at low temperature(291 K)within short time(5 and 20 min).The difference between the H_(2) generation capacities is mainly originated from the initial nucleation rate of Mg(OH)_(2) and the subsequent processes affected by the microstructures and phase compositions of the hydrolysis alloys.Relative low initial nucleation rate and fully growth of Mg(OH)_(2) nucleus are the premise of high H_(2) generation capacity due to the hydrolysis H_(2) generation process consisted by the nucleation,growth and contacting of Mg(OH)_(2) nucleus.To utilization H_(2) by designing solid state H_(2) generators using optimized Mg-based alloys is expected to be a feasible H_(2) generation strategy at the moment. 展开更多
关键词 h_(2)generation La-doped Mg-Ni alloys KINETICS ThERMODYNAMICS hydrolysis mechanism
下载PDF
UV/H_(2)O_(2)对盐酸林可霉素的光催化降解及生物毒性分析 被引量:1
15
作者 王婷婷 任刚 +1 位作者 关健聪 余燕 《环境化学》 CAS CSCD 北大核心 2023年第7期2403-2410,共8页
本文以盐酸林可霉素(LCM)为研究对象,探究其在UV/H_(2)O_(2)降解作用下的降解情况,探讨了H_(2)O_(2)浓度、初始pH值和有机物等影响因素对LCM的影响及机制.实验结果表明,当H_(2)O_(2)浓度为50 mg·L^(−1),pH=7.3,LCM浓度为10 mg·... 本文以盐酸林可霉素(LCM)为研究对象,探究其在UV/H_(2)O_(2)降解作用下的降解情况,探讨了H_(2)O_(2)浓度、初始pH值和有机物等影响因素对LCM的影响及机制.实验结果表明,当H_(2)O_(2)浓度为50 mg·L^(−1),pH=7.3,LCM浓度为10 mg·L^(−1),反应30 min后,LCM去除率达到98%,且反应过程遵循准一级动力学.利用高效液相色谱串联飞行时间质谱仪(LCMS-TOF 5600+)鉴别出其在UV/H_(2)O_(2)降解过程中主要产物的分子结构式,进而推导出可能的降解路径.利用TEST对降解过程中的产物进行毒性预测,结果表明,中间产物的毒性高于母体,对水质安全保障造成潜在风险. 展开更多
关键词 UV/h_(2)O_(2) 生物毒性分析 盐酸林可霉素 降解机理.
下载PDF
改性石墨烯基传感器对SF_(6)分解组分H_(2)S的吸附机理及检测特性研究 被引量:10
16
作者 高新 李志慧 +2 位作者 刘宇鹏 陈伟根 周渠 《电工技术学报》 EI CSCD 北大核心 2023年第13期3606-3618,共13页
作为SF_(6)的重要分解组分,H_(2)S能够有效反映SF_(6)气体绝缘电气设备内部绝缘故障类型及程度。该文以H_(2)S为目标检测气体,探究了改性石墨烯基传感器对H_(2)S的吸附机理及检测特性。基于第一性原理建立了环氧基化石墨烯(G-O)、钯掺... 作为SF_(6)的重要分解组分,H_(2)S能够有效反映SF_(6)气体绝缘电气设备内部绝缘故障类型及程度。该文以H_(2)S为目标检测气体,探究了改性石墨烯基传感器对H_(2)S的吸附机理及检测特性。基于第一性原理建立了环氧基化石墨烯(G-O)、钯掺杂石墨烯(Pd-G)和环氧基与钯共掺杂石墨烯(Pd-G-O)改性模型和H_(2)S吸附模型,从吸附能、态密度、轨道、脱吸附时间等多方面计算分析了G-O、Pd-G、Pd-G-O的改性机理与吸附机理,结果表明Pd-G-O对H_(2)S表现出优异的吸附性能,吸附能达到-1.015 eV,为较强的化学吸附,且对应着强烈的电荷转移值0.281 e;制备了G-O、Pd-G、Pd-G-O传感材料及器件,基于微量气敏测试平台测试了改性石墨烯基传感器检测H_(2)S的温度、体积分数、响应恢复及稳定特性,其中Pd-G-O传感器对H_(2)S表现出低工作温度(175℃)及快速响应优势。该文的仿真计算与气敏测试分析为研制检测SF_(6)分解组分的低功耗、高灵敏度及快速响应传感器提供了理论基础与实验支撑。 展开更多
关键词 改性石墨烯 SF_(6)分解组分 h_(2)S检测 吸附机理 检测特性
下载PDF
CO_(2)和H_(2)S环境下管线钢的腐蚀与防护研究进展 被引量:2
17
作者 张娇娇 代玉杰 +1 位作者 贾财华 刘思文 《材料保护》 CAS CSCD 2023年第10期204-213,共10页
随着全球油气田工业的发展,管线钢在CO_(2)和H_(2)S环境中的腐蚀已经极大地制约了油气工业的开发,管线钢的腐蚀逐渐受到国内外学者的重视。总结了单一CO_(2)、单一H_(2)S、CO_(2)和H_(2)S共存体系下管线钢的腐蚀行为及机理。阐述了CO_(2... 随着全球油气田工业的发展,管线钢在CO_(2)和H_(2)S环境中的腐蚀已经极大地制约了油气工业的开发,管线钢的腐蚀逐渐受到国内外学者的重视。总结了单一CO_(2)、单一H_(2)S、CO_(2)和H_(2)S共存体系下管线钢的腐蚀行为及机理。阐述了CO_(2)和H_(2)S的分压比会影响管线钢的腐蚀程度,同时最新研究成果表明CO_(2)和H_(2)S分压比的临界值受温度影响。针对CO_(2)和H_(2)S共存的复杂环境下,主要介绍了缓蚀剂保护技术、耐蚀管材的优选来减缓管线钢的腐蚀。最后,展望了CO_(2)和H_(2)S共存体系未来的发展方向以及更经济、有效的防护措施发展前景。 展开更多
关键词 CO_(2) h_(2)S 腐蚀机理 缓蚀剂 管材
下载PDF
管线钢在湿CO_(2)和H_(2)S环境中的腐蚀行为研究
18
作者 马文骏 李金灵 +3 位作者 屈撑囤 朱世东 杨博 鱼涛 《能源化工》 CAS 2023年第1期18-23,共6页
不同于井下用耐蚀管材,含CO_(2)、H_(2)S流体会使油气输送管线产生较严重的腐蚀穿孔、断裂,进而造成流体泄漏,不仅污染周围环境,还会引发安全事故。以常用管线钢为研究对象,对其在湿CO_(2)、H_(2)S单独存在环境及其共存环境中的腐蚀行... 不同于井下用耐蚀管材,含CO_(2)、H_(2)S流体会使油气输送管线产生较严重的腐蚀穿孔、断裂,进而造成流体泄漏,不仅污染周围环境,还会引发安全事故。以常用管线钢为研究对象,对其在湿CO_(2)、H_(2)S单独存在环境及其共存环境中的腐蚀行为进行综述,对腐蚀影响因素进行分析。结果表明,CO_(2)分压、H_(2)S分压和温度变化对湿相CO_(2)、H_(2)S单独存在情况下管线钢的腐蚀速率起主要影响作用;而在CO_(2)与H_(2)S共存时,CO_(2)/H_(2)S分压比和Cl-会对管线钢的腐蚀速率产生较大影响。对CO_(2)与H_(2)S环境中的腐蚀研究进行总结展望,以期为油气田防护措施的制定以及新型耐蚀管材的研发提供参考。 展开更多
关键词 管线钢 CO_(2) h_(2)S 腐蚀机理 影响因素
下载PDF
碳钢在油水混相介质中的CO_(2)/H_(2)S腐蚀行为
19
作者 高强 邱小庆 +1 位作者 艾俊哲 梅平 《腐蚀与防护》 CAS CSCD 北大核心 2023年第7期64-68,85,共6页
采用极化曲线和电化学阻抗测试,研究了N80钢在50℃的3%NaCl盐水与凝析油混相溶液中,不同CO_(2)、H_(2)S分压比(θ=PCO_(2)/PH_(2)S)条件下的腐蚀规律;采用SEM、XPS等分析了N80钢表面腐蚀产物的形貌和组成。结果表明:在饱和CO_(2)溶液中... 采用极化曲线和电化学阻抗测试,研究了N80钢在50℃的3%NaCl盐水与凝析油混相溶液中,不同CO_(2)、H_(2)S分压比(θ=PCO_(2)/PH_(2)S)条件下的腐蚀规律;采用SEM、XPS等分析了N80钢表面腐蚀产物的形貌和组成。结果表明:在饱和CO_(2)溶液中,随着H_(2)S含量的增加,碳钢电极的腐蚀减弱;当θ<20时,随着θ增大,腐蚀电流密度逐渐减小,腐蚀主要由H_(2)S控制,在N80钢表面生成了均匀致密的针状晶型腐蚀产物,主要是FeS和FeS_(1-x)膜;当20<θ<500时,随着θ的增大,腐蚀电流密度先增大后减小,腐蚀由CO_(2)和H_(2)S共同控制,钢片表面生成了多种晶型腐蚀产物,主要是FeCO_(3)和FeS_(1-x)膜;当θ>500时,随着θ的增大,腐蚀电流密度增大,腐蚀反应由CO_(2)控制,钢片表面生成了多边形不规则晶型腐蚀产物,主要是含有少量Fe_(3)O_(4)的FeCO_(3)膜。 展开更多
关键词 N80钢 CO_(2)/h_(2)S 电化学 腐蚀机理
下载PDF
Dual-functional marigold-like Zn_(x)Cd_(1-x)S homojunction for selective glucose photoreforming with remarkable H_(2)coproduction 被引量:1
20
作者 Fuyan Kang Cai Shi +7 位作者 Yeling Zhu Malin Eqi Junming Shi Min Teng Zhanhua Huang Chuanling Si Feng Jiang Jinguang Hu 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2023年第4期158-167,共10页
The global commitment to pivoting to sustainable energy and products calls for technology development to utilize solar energy for hydrogen(H_(2))and value-added chemicals production by biomass photoreforming.Herein,a ... The global commitment to pivoting to sustainable energy and products calls for technology development to utilize solar energy for hydrogen(H_(2))and value-added chemicals production by biomass photoreforming.Herein,a novel dual-functional marigold-like Zn_(x)Cd_(1-x)S homojunction has been the production of lactic acid with high-yield and H_(2)with high-efficiency by selective glucose photoreforming.The optimized Zn_(0.3)Cd_(0.7)S exhibits outstanding H_(2)generation(13.64 mmol h^(-1)g^(-1)),glucose conversion(96.40%),and lactic acid yield(76.80%),over 272.80 and 19.21 times higher than that of bare ZnS(0.05 mmol h^(-1)g^(-1))and CdS(0.71 mmol h^(-1)g^(-1))in H_(2)generation,respectively.The marigold-like morphology provides abundant active sites and sufficient substrates accessibility for the photocatalyst,while the specific role of the homojunction formed by hexagonal wurtzite(WZ)and cubic zinc blende(ZB)in photoreforming biomass has been demonstrated by density functional theory(DFT)calculations.Glucose is converted to lactic acid on the WZ surface of Zn_(0.3)Cd_(0.7)S via the photoactive species·O_(2)^(-),while the H_(2)is evolved from protons(H^(+))in H_(2)O on the ZB surface of Zn_(0.3)Cd_(0.7)S.This work paves a promising road for the production of sustainable energy and products by integrating photocatalysis and biorefine. 展开更多
关键词 Zn_(x)Cd_(1-x)S homojunction Selective glucose photoreforming Biomass valorization Sustainable h_(2) Photoreforming mechanism
下载PDF
上一页 1 2 4 下一页 到第
使用帮助 返回顶部