Grain boundaries(GBs)play a significant role in the deformation behaviors of nanocrystalline ceramics.Here,we investigate the compression behaviors of nanocrystalline boron carbide(nB_(4)C)with varying grain sizes usi...Grain boundaries(GBs)play a significant role in the deformation behaviors of nanocrystalline ceramics.Here,we investigate the compression behaviors of nanocrystalline boron carbide(nB_(4)C)with varying grain sizes using molecular dynamics simulations with a machine-learning force field.The results reveal quasi-plastic deformation mechanisms in nB_(4)C:GB sliding,intergranular amorphization and intragranular amorphization.GB sliding arises from the presence of soft GBs,leading to intergranular amorphization.Intragranular amorphization arises from the interaction between grains with unfavorable orientations and the softened amorphous GBs,and finally causes structural failure.Furthermore,nB_(4)C models with varying grain sizes from 4.07 nm to 10.86 nm display an inverse Hall-Petch relationship due to the GB sliding mechanism.A higher strain rate in nB_(4)C often leads to a higher yield strength,following a 2/3 power relationship.These deformation mechanisms are critical for the design of ceramics with superior mechanical properties.展开更多
The effects of T4,T5,and T6 treatment on the microstructure and mechanical properties of the extruded Mg-4.3Gd-3.2Y-1.2Zn-0.5Zr(wt.%)alloy with a relatively low RE content(7.5 wt.%)were investigated.T4 treatment at 45...The effects of T4,T5,and T6 treatment on the microstructure and mechanical properties of the extruded Mg-4.3Gd-3.2Y-1.2Zn-0.5Zr(wt.%)alloy with a relatively low RE content(7.5 wt.%)were investigated.T4 treatment at 450–500°C induces a gradual grain growth ofα-Mg but an obvious transition of texture component from<0001>⊥ED to<0001>∥ED.Interdendritic LPSO phases are highly stable against annealing while intragranular ones experience dissolution and re-precipitation.After peak-ageing at 200°C,the elongation of as-extruded and T4 samples is just slightly reduced or even increased due to the weak ageing hardening response.T5 sample exhibits an attractive combination of strength and ductility,with a tensile yield strength(TYS)of 303 MPa and elongation of 20.0%.The Hall–Petch relation for the alloys with or without ageing treatment has been estimated.Grain boundary strengthening rather than precipitation strengthening has the dominant contribution to TYS,and a modified equation is developed to predict grain boundary strengthening values for Mg-Gd-Y-Zn-Zr alloys which contain different Schmid factors for basal slip.展开更多
Based on the available experimental and compu- tational capabilities, a phenomenological approach has been proposed to formulate a hypersurface in both spatial and temporal domains to predict combined specimen size an...Based on the available experimental and compu- tational capabilities, a phenomenological approach has been proposed to formulate a hypersurface in both spatial and temporal domains to predict combined specimen size and load- ing rate effects on the material properties [ 1-2]. A systematic investigation is being performed to understand the combined size, rate and thermal effects on the properties and deformation patterns of representative materials with different nanos- tructures and under various types of loading conditions [3- 16]. The recent study on the single crystal copper response to impact loading has revealed the size-dependence of the Hugoniot curve. In this paper, the ＂inverse Hall-Petch＂ behavior as observed in the impact response of single crystal copper, which has not been reported in the open literature, is investigated by performing molecular dynamics simulations of the response of copper nanobeam targets subjected to impacts by copper nanobeam flyers with different impact velocities. It appears from the preliminary results that the ＂inverse Hall-Petch＂ behavior in single crystal copper is mainly due to the formation and evolution of disordered atoms and the interaction between ordered and disordered atoms, as compared with the physics behind the ＂inverse Hall-Petch＂behavior as observed in nanocrystalline materials展开更多
The Hall and ion-slip effects on fully developed electrically conducting couple stress fluid flow between vertical parallel plates in the presence of a temperature dependent heat source are investigated. The governing...The Hall and ion-slip effects on fully developed electrically conducting couple stress fluid flow between vertical parallel plates in the presence of a temperature dependent heat source are investigated. The governing non-linear partial differential equations are transformed into a system of ordinary differential equations using similarity transformations. The resulting equations are then solved using the homotopy analysis method （HAM）. The effects of the magnetic parameter, Hall parameter, ion-slip parameter and couple stress fluid parameter on velocity and temperature are discussed and shown graphically展开更多
基金the support from the National Natural Science Foundation of China (Grant No.11972267)。
文摘Grain boundaries(GBs)play a significant role in the deformation behaviors of nanocrystalline ceramics.Here,we investigate the compression behaviors of nanocrystalline boron carbide(nB_(4)C)with varying grain sizes using molecular dynamics simulations with a machine-learning force field.The results reveal quasi-plastic deformation mechanisms in nB_(4)C:GB sliding,intergranular amorphization and intragranular amorphization.GB sliding arises from the presence of soft GBs,leading to intergranular amorphization.Intragranular amorphization arises from the interaction between grains with unfavorable orientations and the softened amorphous GBs,and finally causes structural failure.Furthermore,nB_(4)C models with varying grain sizes from 4.07 nm to 10.86 nm display an inverse Hall-Petch relationship due to the GB sliding mechanism.A higher strain rate in nB_(4)C often leads to a higher yield strength,following a 2/3 power relationship.These deformation mechanisms are critical for the design of ceramics with superior mechanical properties.
基金the National Natural Science Foundation of China(Nos.51904036 and 51874049)the Hunan Provincial Natural Science Foundation of China(Nos.2020JJ5600 and 2018JJ2365)+1 种基金the Hunan Education Department Outstanding Youth Project of China(No.17B069)the Scientific Research Project of Hunan Education Department(No.20C0088).
文摘The effects of T4,T5,and T6 treatment on the microstructure and mechanical properties of the extruded Mg-4.3Gd-3.2Y-1.2Zn-0.5Zr(wt.%)alloy with a relatively low RE content(7.5 wt.%)were investigated.T4 treatment at 450–500°C induces a gradual grain growth ofα-Mg but an obvious transition of texture component from<0001>⊥ED to<0001>∥ED.Interdendritic LPSO phases are highly stable against annealing while intragranular ones experience dissolution and re-precipitation.After peak-ageing at 200°C,the elongation of as-extruded and T4 samples is just slightly reduced or even increased due to the weak ageing hardening response.T5 sample exhibits an attractive combination of strength and ductility,with a tensile yield strength(TYS)of 303 MPa and elongation of 20.0%.The Hall–Petch relation for the alloys with or without ageing treatment has been estimated.Grain boundary strengthening rather than precipitation strengthening has the dominant contribution to TYS,and a modified equation is developed to predict grain boundary strengthening values for Mg-Gd-Y-Zn-Zr alloys which contain different Schmid factors for basal slip.
基金supported in part by the U.S.Defense Threat Reduction Agency(HDTRA1-10-1-0022)the National Key Basic Research Special Foundation of China(2010CB832704)+2 种基金the National Natural Science Foundation of China(10721062)the 111 Joint Program by the Chinese Ministry of EducationState Administration of Foreign Experts Affairs(B08014)
文摘Based on the available experimental and compu- tational capabilities, a phenomenological approach has been proposed to formulate a hypersurface in both spatial and temporal domains to predict combined specimen size and load- ing rate effects on the material properties [ 1-2]. A systematic investigation is being performed to understand the combined size, rate and thermal effects on the properties and deformation patterns of representative materials with different nanos- tructures and under various types of loading conditions [3- 16]. The recent study on the single crystal copper response to impact loading has revealed the size-dependence of the Hugoniot curve. In this paper, the ＂inverse Hall-Petch＂ behavior as observed in the impact response of single crystal copper, which has not been reported in the open literature, is investigated by performing molecular dynamics simulations of the response of copper nanobeam targets subjected to impacts by copper nanobeam flyers with different impact velocities. It appears from the preliminary results that the ＂inverse Hall-Petch＂ behavior in single crystal copper is mainly due to the formation and evolution of disordered atoms and the interaction between ordered and disordered atoms, as compared with the physics behind the ＂inverse Hall-Petch＂behavior as observed in nanocrystalline materials
文摘The Hall and ion-slip effects on fully developed electrically conducting couple stress fluid flow between vertical parallel plates in the presence of a temperature dependent heat source are investigated. The governing non-linear partial differential equations are transformed into a system of ordinary differential equations using similarity transformations. The resulting equations are then solved using the homotopy analysis method （HAM）. The effects of the magnetic parameter, Hall parameter, ion-slip parameter and couple stress fluid parameter on velocity and temperature are discussed and shown graphically
