This paper evaluates two methods of diagnosing damage, Natural frequency and Stiffness-Frequency change-Based damage detection method in reinforced concrete beams under load using vibration characteristics such as nat...This paper evaluates two methods of diagnosing damage, Natural frequency and Stiffness-Frequency change-Based damage detection method in reinforced concrete beams under load using vibration characteristics such as natural frequency and mode shape. The research uses finite element method with crack damage instead of deleting or reducing the bearing capacity of the element like in previous studies. First, a theory of the damage diagnosis method based on the change of natural frequency and mode shape is presented. Next, the simulation results of reinforced concrete beams using ANSYS will be compared with the experiment. Particularly, the investigated damage cases are cracks in reinforced concrete beams under loads. Finally, we will evaluate the accuracy of the damage diagnosis methods and suggest the location of the vibration data and specify the failure threshold of the methods.展开更多
The low frequency line components of the radiated noise from an underwater target usually have both high spectrum level and sustained stability. This feature could be used to increase the detection performance of conv...The low frequency line components of the radiated noise from an underwater target usually have both high spectrum level and sustained stability. This feature could be used to increase the detection performance of conventional broadband energy integration method. The required spectrum level is theoretically discussed when the detection performance of the known line detection is better than that of broadband energy integration method. Under the condition of the target can be detected in line spectrum band, the relationship between the line spectrum level and signal to noise ratio （SNR） is also discussed. This paper proposes a line spectrum target detection method that a matrix using DC jump to fluctuations ratios of sub-band spatial spectrum and beam space output is constructed. This matrix acts as a filter that the line spectrum target with certain frequency and azimuth is passed at most. By fusing with the other sub band results, the conventional detection performance can be improved. At the same time, the applicable condition and detection performance are analyzed in the paper. The simulation and the sea trial data processing results show that the algorithm can effectively extract weak goal line spectrum target under the condition of multi-interference. The algorithm doesn＇t need multi-frame statistics and the detection performance is closer to the optimal line spectrum method.展开更多
文摘This paper evaluates two methods of diagnosing damage, Natural frequency and Stiffness-Frequency change-Based damage detection method in reinforced concrete beams under load using vibration characteristics such as natural frequency and mode shape. The research uses finite element method with crack damage instead of deleting or reducing the bearing capacity of the element like in previous studies. First, a theory of the damage diagnosis method based on the change of natural frequency and mode shape is presented. Next, the simulation results of reinforced concrete beams using ANSYS will be compared with the experiment. Particularly, the investigated damage cases are cracks in reinforced concrete beams under loads. Finally, we will evaluate the accuracy of the damage diagnosis methods and suggest the location of the vibration data and specify the failure threshold of the methods.
文摘The low frequency line components of the radiated noise from an underwater target usually have both high spectrum level and sustained stability. This feature could be used to increase the detection performance of conventional broadband energy integration method. The required spectrum level is theoretically discussed when the detection performance of the known line detection is better than that of broadband energy integration method. Under the condition of the target can be detected in line spectrum band, the relationship between the line spectrum level and signal to noise ratio （SNR） is also discussed. This paper proposes a line spectrum target detection method that a matrix using DC jump to fluctuations ratios of sub-band spatial spectrum and beam space output is constructed. This matrix acts as a filter that the line spectrum target with certain frequency and azimuth is passed at most. By fusing with the other sub band results, the conventional detection performance can be improved. At the same time, the applicable condition and detection performance are analyzed in the paper. The simulation and the sea trial data processing results show that the algorithm can effectively extract weak goal line spectrum target under the condition of multi-interference. The algorithm doesn＇t need multi-frame statistics and the detection performance is closer to the optimal line spectrum method.
