Increasing the Efficiency and Level of Environmental Safety of Pro-Environmental City Heat Supply Technologies by Low Power Nuclear Plants

In connection with the current prospect of decarbonization of coal energy through the use of small nuclear power plants (SNPPs) at existing TPPs as heat sources for heat supply to municipal heating networks, there is a technological need to improve heat supply schemes to increase their environmental friendliness and efficiency. The paper proves the feasibility of using the heat-feeding mode of ASHPs for urban heat supply by heating the network water with steam taken from the turbine. The ratio of electric and thermal power of a “nuclear” combined heat and power plant is given. The advantage of using a heat pump, which provides twice as much electrical power with the same heat output, is established. Taking into account that heat in these modes is supplied with different potential, the energy efficiency was used to compare these options. To increase the heat supply capacity, a scheme with the use of a high-pressure heater in the backpressure mode and with the heating of network water with hot steam was proposed. Heat supply from ASHPs is efficient and environmentally friendly even in the case of significant remoteness of heat consumers.

Nitrogen Gas Heating and Supply System for SST-1 Tokamak

Steady State Tokamak （SST-1） vacuum vessel baking as well as baking of the first wall components of SST-1 are essential to plasma physics experiments. Under a refurbishment spectrum of SST-1, the nitrogen gas heating and supply system has been fully refurbished. The SST-1 vacuum vessel consists of ultra-high vacuum （UHV） compatible eight modules and eight sectors. Rectangular baking channels are embedded on each of them. Similarly, the SST-1 plasma facing components （PFC） are comprised of modular graphite diverters and movable graphite based limiters. The nitrogen gas heating and supply system would bake the plasma facing components at 350 ~C and the SST-1 vacuum vessel at 150 ~C over an extended duration so as to remove water vapour and other absorbed gases. An efficient PLC based baking facility has been developed and implemented for monitoring and control purposes. This paper presents functional and operational aspects of a SST-1 nitrogen gas heating and supply system. Some of the experimental results obtained during the baking of SST-1 vacuum modules and sectors are also presented here.

Design and Analysis of a Small Sewage Source Heat Pump Triple Supply System

Based on the characteristics of sewage from beauty salons,a simulation model of a small sewage source heat pump triple supply system that can be applied to such places is established to optimize the operating conditions of the system.The results show that with the increase of sewage temperature and flow,the performance of the system also increases.In summer conditions,the system provides cooling,recovers waste heat and condensed heat from sewage,with a COP value of 8.97;in winter conditions,the system heats and produces hot water,with a COP value of 2.44;in transitional seasons,only hot water is produced.The COP value is 2.75.Compared with the traditional systems which refers to the air source heat pump and hot water boiler system currently used in beauty salons,this system can save energy by 50.9%.

Study on Matching a 300 MVA Motor Generator with an Ohmic Heating Power Supply in HL-2M

A new 300 MVA/1350 MJ motor generator （MG） will be built to feed all of the poloidal field power supplies （PFPS） and auxiliary heating power supplies of the HL-2M tokamak. The MG has a vertical-shaft salient pole 6-phase synchronous generator and a coaxial 8500 kW induction motor. The Ohmic heating power supply （OHPS） consisting of 4-quadrant DC pulsed convertor is the one with the highest parameters among the PFPS. Therefore, the match between the generator and the OHPS is very important. The matching study with Matlab/Simulink is described in this paper. The simulation results show that the subtransient reactance of the generator is closely related to the inversion operation of the OHPS. By setting various subtransient reactance in the simulation generator model and considering the cost reduction, the optimized parameters are obtained as xd＂ = 0.405 p.u. at 100 Hz for the generator. The models built in the simulation can be used as an important tool for studying the dynamic characteristics and the control strategy of other HL-2M PFPSes.

Heating load interval forecasting approach based on support vector regression and error estimation

As the existing heating load forecasting methods are almostly point forecasting,an interval forecasting approach based on Support Vector Regression (SVR) and interval estimation of relative error is proposed in this paper.The forecasting output can be defined as energy saving control setting value of heating supply substation;meanwhile,it can also provide a practical basis for heating dispatching and peak load regulating operation.By means of the proposed approach,SVR model is used to point forecasting and the error interval can be gained by using nonparametric kernel estimation to the forecast error,which avoid the distributional assumptions.Combining the point forecasting results and error interval,the forecast confidence interval is obtained.Finally,the proposed model is performed through simulations by applying it to the data from a heating supply network in Harbin,and the results show that the method can meet the demands of energy saving control and heating dispatching.

Field Investigation and Comparison Analysis of Low-Grade Heat Pump Technologies in Building Space Heating Projects

The building sector contributes a large ratio of final energy consumption,and improving building energy efficiency is expected to play a significant role in mitigating its carbon dioxide emission.Herein,we collected the on-site measurement data to investigate the techno-economic performances of different heat pump types that exist in building space heating projects in Qingdao,China.An in-depth analysis revealed the temperature variations of measured low-grade heat sources over the whole heating supply period,and urban sewage water shows high stable heat energy quality compared with seawater and geothermal heat resources.Operational behaviors including cycling inlet and outlet temperature of the selected heat pumps were illustrated,and analysis evaluated detailed effects of operational parameters on energy efficiency performances.Then the relationship between COPs distributions of heat pumps and operational conditions was examined further,and the positive effect of the rising temperature of heat sources on energy efficiency improvement of heat pump is highlighted when the heating supply temperature is higher.Furthermore,we analyzed the economic and carbon emission performance of the heat pump system,and results show that electricity price plays a vital role in the lifespan energy cost saving potential,and the heat pump could serve as a promising approach in reducing CO_(2) related to the building space heating.Finally,we recommended suggestions for improving the overall energy efficiency and cost competitiveness of decentralized heat pump systems for building space heating.

Regulation Conditions Influence on the Thermic and Exergic Efficiency Factors Size with the Heat Exchanger of a Coiled Type

The thermal engineering research has been executed for the threecircuit heat exchanger of a coiled type, that provides the thermal loads regulation for the heating and hot water supply systems. A processing curve of the warmth supply regulation at a combined heating and hot water supply load, was used at that. It is important to know the processes running inside the apparatus for the technical characteristics improvement of the threecircuit heat exchanger of a coiled type. The task solution will allow save the materials consumption for the threecircuit heat exchangers of a coiled type manufacturing in the future.

Future Market of Small Reactors and Feasibility Study in Mongolia

The relation between the implementation time of small reactor and its market was studied if small reactor could be implemented to be utilized as a base load operation. If the small reactors with 100 or 50 MWe could be implemented from 2020, the potential countries could be selected from the view point of the estimated total electricity consumption in 2020 and the stability of the electrical grid system. The commercialization of small reactors should be best done early because the market for these power units as a base load operation might be reduced due to the increase of the electricity consumption in the future after 2020. The implementation program of small reactors for the district heating and electricity supply in Mongolia, which is one of the countries having the interests in small reactor, was investigated and the future implementation plan was proposed too. In order to reduce the air pollution by coal fired heating system, there is an urgent need to start the discussion for the utilization of nuclear district heating reactor in Ulaanbaatar.

Swimming pool heating technology:A state-of-the-art review

A large amount of heat is needed to maintain the thermal comfort of both indoor and outdoor swimming pools in cold seasons.This motivates the development of various heating technologies aiming to reduce energy use,as well as operating and investment costs.Although their development can be traced back to the 1960s,a comprehensive review of these technologies is lacking.Therefore,this paper presents a comprehensive review of the development of heating technologies for swimming pools.This review firstly introduces available heat transfer models that can be used to calculate or predict heat loss and heat gain for swimming pools.Then,different passive and active technologies are summarized.The active heating technologies used for indoor swimming pools include solar collector,heat pump,waste heat recovery,geothermal energy,and congregation technologies.The active heating technologies used for outdoor swimming pools include solar collector,heat pump,PCM storage,geothermal energy,biomass heater,and waste heat recovery technologies.A discussion is presented on the practical and possible heating techniques for swimming pool applications.Finally,through the reviewed literature,future research opportunities are identified,to guide researchers to investigate swimming pool heating systems with suitable and relevant technologies.

Sulfide metallogenic model for the ultraslow-spreading Southwest Indian Ridge

Polymetallic sulfides present in mid-ocean ridges(MORs)have become important strategic resources for humans,and a scientific metallogenic model is necessary for the investigation and exploration of these resources.Compared to fast-and slow-spreading MORs,ultraslow-spreading MORs show substantial differences in magma supply,tectonic activity,and oceanic crust structures.However,information on hydrothermal circulation and a metallogenic model related to sulfides along the ultraslow-spreading ridges is still limited,which hinders further exploration of these resources.In this study,the distribution of hydrothermal activities,as well as the characteristics of the structures,heat sources,fluid pathways,host rock types,fluid properties,and sulfide assemblages in typical hydrothermal fields along the ultraslow-spreading Southwest Indian Ridge(SWIR),have been studied.It is concluded that the hydrothermal systems along the SWIR can be categorized into three types,including local enhanced magma-controlled,one-way detachment/high-angle large-offset fault-controlled,and flip-flop detachment-controlled types,which are further categorized into five subtypes based on their distinct geological backgrounds.Herein,we present a sulfide metallogenic model called Local Enhanced Heat Supply-Deep Faults(eHeat-dFault)for the SWIR.The overall spreading rate remains almost constant(14-18 mm/year),while the magma supply is heterogeneous in the segment scale along the SWIR.Over the past two decades,various hydrothermal systems and sulfide deposits have been identified along the SWIR.A deep magma chamber(4-9 km)is developed in the ridge segment with sufficient magma supply owing to the local enhanced magma supply,while long-lived active deep detachment faults(up to 13 km)with associated metallogenic belts are developed in ridge segments with poor magma supply.Hence,the ultraslow-spreading MORs fulfill the necessary conditions of a sustained heat source and stable hydrothermal pathway for the formation of large-scale polymetallic sulfide deposits.The number of hydrothermal fields detected in the investigation area is 2-3 times that predicted by the traditional Spreading Rate-Magma Flux model,demonstrating its significant endowment for sulfide resources.A balance between magma supply and faulting may influence the type and depth of hydrothermal circulation,the frequency of hydrothermal activity along the axis,and the scale of sulfide deposits.Spreading rate was previously believed to control heat sources,magma supply,and tectonic processes.However,for the SWIR,we suggest that local enhanced heat supply and deep detachment faults have a greater influence than the spreading rate on hydrothermal circulation and sulfide mineralization.The eHeat-dFault sulfide metallogenic model proposed herein could provide guidance for further exploration and research on polymetallic sulfides in ultraslow-spreading SWIR.