Community Needs Assessment in Relation to Urban Heat Effects: A Study in Greater Kuala Lumpur, Malaysia

Urban areas usually experience higher temperatures compared with their rural surroundings; this is characterized as urban heat islands （UHIs）, which are the result of environmental overheating due to anthropic activities. Urban areas,which are characterised by massive construction that reduce local vegetation coverage, are subject to the absorption of a large amount of solar radiation,which is only partially released into the atmosphere by radiation in the thermal infrared.

DETERMINATION OF HEAT EFFECT OF ANODIC PROCESS OF Ni3S2

ＤＥＴＥＲＭＩＮＡＴＩＯＮＯＦＨＥＡＴＥＦＦＥＣＴＯＦＡＮＯＤＩＣＰＲＯＣＥＳＳＯＦＮｉ＿３Ｓ＿２ＤＥＴＥＲＭＩＮＡＴＩＯＮＯＦＨＥＡＴＥＦＦＥＣＴＯＦＡＮＯＤＩＣＰＲＯＣＥＳＳＯＦＮｉ＿３Ｓ＿２￥Ｚｈａｎｇ，Ｈｅｎｇｚｈｏｎｇ；Ｆａｎｇ，Ｚｈｅｎｇ...

Geospatial Analysis of Urban Heat Island Effects and Tree Equity

In recent decades, Urban Heat Island Effects have become more pronounced and more widely examined. Despite great technological advances, our current societies still experience great spatial disparity in urban forest access. Urban Heat Island Effects are measurable phenomenon that are being experienced by the world’s most urbanized areas, including increased summer high temperatures and lower evapotranspiration from having impervious surfaces instead of vegetation and trees. Tree canopy cover is our natural mitigation tool that absorbs sunlight for photosynthesis, protects humans from incoming radiation, and releases cooling moisture into the air. Unfortunately, urban areas typically have low levels of vegetation. Vulnerable urban communities are lower-income areas of inner cities with less access to heat protection like air conditioners. This study uses mean evapotranspiration levels to assess the variability of urban heat island effects across the state of Tennessee. Results show that increased developed land surface cover in Tennessee creates measurable changes in atmospheric evapotranspiration. As a result, the mean evapotranspiration levels in areas with less tree vegetation are significantly lower than the surrounding forested areas. Central areas of urban cities in Tennessee had lower mean evapotranspiration recordings than surrounding areas with less development. This work demonstrates the need for increased tree canopy coverage.

Spatial and temporal analysis of urban heat island effect over Tiruchirappalli city using geospatial techniques

Alterations made to the natural ground surface and the anthropogenic activity elevate the surface and air temperature in the urban areas compared with the surrounding rural areas,known as urban heat island effect.Thermal remote sensors measure the radiation emitted by ground objects,which can be used to estimate the land surface temperature and are beneficial for studying urban heat island effects.The present study investigates the spatial and temporal variations in the effects of urban heat island over Tiruchirappalli city in India during the summer and winter seasons.The study also identifies hot spots and cold spots within the study area.In this study,a significant land surface temperature difference was observed between the urban and rural areas,predominantly at night,indicating the presence of urban heat island at night.These diurnal land surface temperature fluctuations are also detected seasonally,with a relatively higher temperature intensity during the summer.The trend line analysis shows that the mean land surface temperature of the study area is increasing at a rate of 0.166 K/decade with p less than 0.01.By using the spatial autocorrelation method with the urban heat island index as the key parameter,hot spots with a 99 percent confidence level and a 95 percent confidence level were found within the urban area.A hot spot with 95 and 90 percent confidence level was identified outside the urban area.This spike in temperature for a particular region in the rural area is due to industry and the associated built-up area.The study also identified cold spots with a 90 percent confidence level within the rural area.However,cold spots with a 95 and 99 percent confidence level were not identified within the study area.

Impact of the Urban Heat Island Effect on Ozone Pollution in Chengdu City,China

With the advancement of urbanization,the urban heat island effect and ozone pollution have become hot issues in urban research.The urban heat island effect can impact ozone conversion,but its mechanism of action is unclear.In this study,the effects of the urban heat island effect on ozone concentration in Chengdu City,China,were investigated by comparing the ozone concentration under different heat island levels with ozone data from March 2020 to February 2021 and the temperature and wind field data of ERA5-Land during the same period.The results showed that:1)regarding the distribution characteristics,the ozone concentration in Chengdu presented a‘high in summer and low in winter’distribution.The ozone concentration in summer(189.54µg/m^(3))was nearly twice that in winter(91.99µg/m^(3)),and the ozone diurnal variation presented a‘single peak and single valley’distribution,with a peak at 16:00.2)For the characteristics of the heat island effect,the heat island intensity in Chengdu was obviously higher in spring than in other seasons,and the diurnal variation showed a‘single peak and single valley’distribution,with the peak and trough values appearing at 9:00 and 17:00,respectively.Spatially,the eastern part of Chengdu was a heat island,while the western and northwestern parts were mostly cold island.3)The correlation analysis between heat island intensity and ozone concentration showed a significant positive correlation but with a 7–8 h time lag.Ambient air temperature was not the main factor affecting ozone concentration.The heat island effect impacts the ozone concentration in two ways:changing the local heat budget to promote ozone generation and forming local urban wind,which promotes ozone diffusion or accumulation and forms different areas of low and high ozone values.

Changing Characteristics of Urban Heat Island Effect in Weihai City

Based on the local climate zoning theory and the observation data of hourly temperature of 22 automatic weather stations from 2012 to 2021, K-means clustering algorithm was used to analyze the daily, monthly, seasonal, annual and spatial variation characteristics of urban heat island effect in Weihai City in the past 10 years. The results showed that in recent 10 years, the average urban heat island intensity was 1.24 ℃, showing a gradual weakening trend of -0.169 3 ℃/10 a;the summer average heat island intensity was 0.86 ℃, showing a gradual weakening trend of -0.047 5 ℃/10 a. The heat island intensity had obvious diurnal variation characteristics, that is, "it was weak in the day and strong at night". In terms of seasonal variation, heat island effect was the weakest in summer, stronger in spring and autumn, and the strongest in winter. The diurnal, seasonal and annual changes of heat island intensity showed a reverse trend to those of temperature. The high-value area of urban heat island was highly consistent with human residential activity areas and industrial and commercial intensive areas, and the extension trend of heat island intensity was the same as the direction of urban development and construction. The "cold island phenomenon" in some offshore areas was related to the geographical location, terrain and the southeast monsoon trend in summer. The adverse effects of urban heat island effect can be reduced by optimizing the types and distribution of vegetation communities, rationally planning and constructing urban water body, promoting green building materials and adjusting shape design, etc.

The Use of Models to Evaluate Corrosion Effects on Mild Steel Heat Exchanger in Water and Mono Ethanol Amine (MEA)

Heat exchanger is an important equipment used in process industries for cooling and heating purposes. Its design configuration which involves the flow of cold and hot fluids within the exchanger subjects it to corrosion attack. The article utilized the principle of mass and energy conservation in the development of weight and temperature models to study the effect of corrosion on mild steel coupon inside the exchanger containing water and Mono ethanol amine (MEA). The models developed were resolved analytically using Laplace Transform and simulated using Excel as simulation tool and data obtained from experiment in the laboratory to obtain profiles of weight loss and temperature as a function of time. The weight loss and performance of mild steel under various corrosive conditions were examined which indicates the effect of corrosion on the mild steel heat exchanger in water and MEA media. The result shows that water is more corrosive than MEA at higher temperatures and at lower temperatures of 35°C and 1 atm, MEA has inhibitive properties than water as indicated by the weight loss result with time. The comparative analysis between the results obtained from the model simulation and experimental results shows that the result obtained from the model is more reliable and demonstrated better performance characteristics as it clearly shows mild steel heat exchanger experiences more corrosive effect in water medium than MEA at higher temperatures. And at lower temperatures, MEA becomes more inhibitive and less corrosive than water. The model simulation results correlate with various literatures and hence, it is valid for future referencing.

Formation and Variation of the Atmospheric Heat Source over the Tibetan Plateau and Its Climate Effects

To cherish the memory of the late Professor Duzheng YE on what would have been his 100 th birthday, and to celebrate his great accomplishment in opening a new era of Tibetan Plateau（TP） meteorology, this review paper provides an assessment of the atmospheric heat source（AHS） over the TP from different data resources, including observations from local meteorological stations, satellite remote sensing data, and various reanalysis datasets. The uncertainty and applicability of these heat source data are evaluated. Analysis regarding the formation of the AHS over the TP demonstrates that it is not only the cause of the atmospheric circulation, but is also a result of that circulation. Based on numerical experiments, the review further demonstrates that land–sea thermal contrast is only one part of the monsoon story. The thermal forcing of the Tibetan–Iranian Plateau plays a significant role in generating the Asian summer monsoon（ASM）, i.e., in addition to pumping water vapor from sea to land and from the lower to the upper troposphere, it also generates a subtropical monsoon–type meridional circulation subject to the angular momentum conservation, providing an ascending-air large-scale background for the development of the ASM.

Numerical study of self-heating effects of small-size MOSFETs fabricated on silicon-on-aluminum nitride substrate

Compared with bulk-silicon technology, silicon-on-insulator (SOI) technology possesses many advan-tages but it is inevitable that the buried silicon dioxide layer also thermally insulates the metal – oxide – silicon field-effect transistors (MOSFETs) from the bulk due to the low thermal conductivity. One of the alternative insulator to replace the buried oxide layer is aluminum nitride (AlN), which has a thermal conductivity that is about 200 times higher than that of SiO2 (320 W·m ? 1·K? 1 versus 1.4 W·m? 1·K? 1). To investigate the self-heating effects of small-size MOSFETs fabricated on silicon-on-aluminum nitride (SOAN) substrate, a two-dimensional numerical analysis is performed by using a device simulator called MEDICI run on a Solaris workstation to simulate the electri-cal characteristics and temperature distribution by comparing with those of bulk and standard SOI MOSFETs. Our study suggests that AlN is a suitable alternative to silicon dioxide as a buried dielectric in SOI and expands the appli-cations of SOI to high temperature conditions.

Characteristics of urban heat island effect in Lhasa City

This paper analyzes the Urban Heat Island （UHI） effect in Lhasa City of Tibet using meteorological observations, the Normalized Difference Vegetation Index （NDVI）, Land Surface Temperature （LST） data obtained from Earth Observing System/Moderate resolution Imaging Spectroradiometer （EOS/MODIS） information, and correlation and composite analyses. The results show： （1） Areas with high temperature are primarily located in the center of the city or nearby counties, while low temperature areas are in the suburbs of counties. The area with high temperature has expanded in recent years and some high-temperature centers have even migrated to certain other regions. （2） The UHI intensity tends to be stronger both in annual and seasonal variations, especially in winter. Also, LST is somewhat positively related to mean air temperature. （3） A negative correlation exists between the changes of LST and NDVI with the increase of vegetation from urban to rural areas in different seasons. （4） The UHI intensity is negatively correlated with precipitation while positively correlated with wind speed, and the relation between the UHI intensity and evaporation varies with the seasons, namely, the intensity is positively correlated with summer evaporation but negatively corre- lated with winter evaporation. （5） UHI intensity might be enhanced by intensified urbanization, wherein built-up areas expand, there is increased heat from human activity, and there is more artificial heat input to the atmosphere.

Therapeutic Actions of the Chinese Herbal Formulae with Cold and Heat Properties and Their Effects on Ultrastructures of Synoviocytes in Rats of the Collagen-Induced Arthritis

The therapeutic actions of Qing Luo Yin (QLY清络饮) with heat property and Wen Luo Yin (WLY温络饮) with cold property on pain, swelling of the ankle, arthritis index and ultrastructures of synoviocytes were compared in rats of type II collagen-induced arthritis (CIA), with tripterygium glycosidorum (TG) used as control. The results indicated that both QLY and WLY could reduce pain, swelling of the ankle and the arthritis index of CIA, and QLY had better effects in reducing the swelling of the ankle and controlling the secondary pathological lesions as compared with WLY. Investigation on the ultrastructures of synoviocytes indicated that both QLY and WLY could reduce the number of Golgi apparatus, rough surface endoplasmic reticulum, dense bodies, matrix filaments and vacuoles so as to suppress the excessive secretion of synoviocytes in rats of CIA.

Changes of Urban Boundary Layer Thermodynamic Stability Induced by Heat Island Effect and Their Influences on Precipitation

[Objective] The aim was to study the characteristics of the changes of the urban boundary layer thermodynamic stability induced by heat island effect and their influences on precipitation.[Method] Proceeding from the thermodynamic equation,the changes of urban boundary layer thermodynamic stability caused by the urban heat disturbance and the mean state of heat island effect were discussed.The influence of the changes of urban boundary layer thermodynamic stability on the precipitation was expounded.Combining with case study of precipitation in Xi’an,the test was verified.[Result] Under interaction between the disturbed temperature and disturbed airflow,the boundary thermal disturbed stability(θ’z) was positive in the urban zone,as well as in the upstream and downstream areas of the city.But the stability in the urban zone was weaker than the suburbs,which favored for the short-time convective precipitation.For the boundary layer mean thermal stability(θ-0-0z) under the interaction between the mean airflow and mean environmental temperature,if the city zone was in the front of the warm ridge,the stability in the upstream of the city weakened which increased the instability of the boundary layer,while it increased in the downstream of the city.It was contrary if the city zone was in the font of the cold trough.For the mean airflow(prevailing wind) and the mean horizontal disturbed temperature,if it was upward motion in the boundary layer,the boundary layer mean thermal disturbed stability(θ’-0z) was negative in the downstream and positive in the upstream.Strong precipitation occured in the upstream of the city.It was contrary if it was descending air in the boundary layer.[Conclusion] The above results served some references for the fine city forecast.

Melting heat transfer effects on stagnation point flow of micropolar fluid saturated in porous medium with internal heat generation(absorption)

The effect of melting heat transfer on the two dimensional boundary layer flow of a micropolar fluid near a stagnation point embedded in a porous medium in the presence of internal heat generation/absorption is investigated. The governing non-linear partial differential equations describing the problem are reduced to a system of non-linear ordinary differential equations using similarity transformations solved numerically using the Chebyshev spectral method. Numerical results for velocity, angular velocity and temperature profiles are shown graphically and discussed for different values of the inverse Darcy number, the heat generation/absorption parameter, and the melting parameter. The effects of the pertinent parameters on the local skin-friction coefficient, the wall couple stress, and the local Nusselt number are tabulated and discussed. The results show that the inverse Darcy number has the effect of enhancing both velocity and temperature and suppressing angular velocity. It is also found that the local skin-friction coefficient decreases, while the local Nusselt number increases as the melting parameter increases.

Joule heating effect of electroosmosis in a finite-length microchannel made of different materials

This paper presents a numerical analysis of Joule heating effect of electroosmo- sis in a finite-length microchannel made of the glass and polydimethylsiloxane （PDMS） polymer. The Poisson-Boltzmann equation of electric double layer, the Navier-Stokes equation of liquid flow, and the liquid-solid coupled heat transfer equation are solved to investigate temperature behaviors of electroosmosis in a two-dimensional microchannel. The feedback effect of temperature variation on liquid properties （dielectric constant, vis- cosity, and thermal and electric conductivities） is taken into account. Numerical results indicate that there exists a heat developing length near the channel inlet where the flow velocity, temperature, pressure, and electric field rapidly vary and then approach to a steady state after the heat developing length, which may occupy a considerable portion of the microchannel in cases of thick chip and high electric field. The liquid temperature of steady state increases with the increase of the applied electric field, channel width, and chip thickness. The temperature on a PDMS wall is higher than that on a glass wall due to the difference of heat conductivities of materials. Temperature variations are found in the both longitudinal and transverse directions of the microchannel. The increase of the temperature on the wall decreases the charge density of the electric double layer. The longitudinal temperature variation induces a pressure gradient and changes the behavior of the electric field in the microchannel. The inflow liquid temperature does not change the liquid temperature of steady state and the heat developing length.

THERMAL EFFECTS OF BUILDING′S EXTERNAL SURFACES IN CITY——Characteristics of Heat Flux into and out of External Wall Surfaces

This study examined the thermal effects of building′s external wall surfaces, using observational data of spatial-temporal distribution of surface temperature, air temperature, and heat flux into and out of external surface. Results indicate that external wall surface temperature and nearby air temperature vary with the change of orientation, height and season. In general, the external wall surface temperature is lower near the ground, and is higher near the roof, than nearby air temperature. But north wall surface temperature is mostly lower than nearby air temperature at the same height; south wall surface temperature during the daytime in December, and west wall surface temperature all day in August, is respectively higher than nearby air temperature. The heat fluxes into and out of external wall surfaces show the differences that exist in the various orientations, heights and seasons. In December, south wall surface at the lower sites emits heat and north wall surface at the higher sites absorbs heat. In April, all external wall surfaces, emit heat near the ground and absorb heat near the roof. In August, west wall surface all day emits heat, and other wall surfaces just show the commensurate behavior with that in April.

Analysis of heating effect on the process of high deposition rate microcrystalline silicon

A possible heating effect on the process of high deposition rate microcrystalline silicon has been studied. It includes the discharge time-accumulating heating effect, discharge power, inter-electrode distance, and total gas flow rate induced heating effect. It is found that the heating effects mentioned above are in some ways quite similar to and in other ways very different from each other. However, all of them will directly or indirectly cause the increase of the substrate surface temperature during the process of depositing microcrystalline silicon thin films, which will affect the properties of the materials with increasing time. This phenomenon is very serious for the high deposition rate of microcrystalline silicon thin films because of the high input power and the relatively small inter-electrode distance needed. Through analysis of the heating effects occurring in the process of depositing microcrystalline silicon, it is proposed that the discharge power and the heating temperature should be as low as possible, and the total gas flow rate and the inter-electrode distance should be suitable so that device-grade high quality deposition rate microcrystalline silicon thin films can be fabricated.

Effect of Joule heating on the electroosmotic microvortex and dielectrophoretic particle separation controlled by local electric field

Dielectrophoresis(DEP)technology has become important application of microfluidic technology to manipulate particles.By using a local modulating electric field to control the combination of electroosmotic microvortices and DEP,our group proposed a device using a direct current(DC)electric field to achieve continuous particle separation.In this paper,the influence of the Joule heating effect on the continuous separation of particles is analyzed.Results show that the Joule heating effect is caused by the local electric field,and the Joule heating effect caused by adjusting the modulating voltage is more significant than that by driving voltage.Moreover,a non-uniform temperature distribution exists in the channel due to the Joule heating effect,and the temperature is the highest at the midpoint of the modulating electrodes.The channel flux can be enhanced,and the enhancement of both the channel flux and temperature is more obvious for a stronger Joule heating effect.In addition,the ability of the vortices to trap particles is enhanced since a larger DEP force is exerted on the particles with the Joule heating effect;and the ability of the vortex to capture particles is stronger with a stronger Joule heating effect.The separation efficiency can also be increased because perfect separation is achieved at a higher channel flux.Parameter optimization of the separation device,such as the convective heat transfer coefficient of the channel wall,the length of modulating electrode,and the width of the channel,is performed.

Effects of Climate and the Urban Heat Island Effect on Urban Tree Growth in Houston

The growing conditions of urban trees differ substantially from forest sites and are mainly characterized by small planting pits with less water, nutrient and aeration availability, high temperatures and radiation inputs as well as pollution and soil compaction. Especially, global warming can amplify the negative effects of urban microclimates on tree growth, health and well-being of citizens. To quantify the growth of urban trees influenced by the urban climate, ten urban tree species in four climate zones were assessed in an overarching worldwide dendrochronological study. The focus of this analysis was the species water oak (Quercus nigra L.) in Houston, Texas, USA. Similar to the overall growth trend, we found in urban trees, water oaks displayed an accelerated growth during the last decades. Moreover, water oaks in the city center grew better than the water oaks growing in the rural surroundings of Houston, though this trend was reversed with high age. Growth habitat (urban, suburban, rural and forest) significantly affected tree growth (p < 0.001) with urban trees growing faster than rural growing trees and forest trees, though a younger age of urban trees might influence the found growth patterns. Growing site in terms of cardinal direction did not markedly influence tree growth, which was more influenced by the prevalent climatic conditions of Houston and the urban climate. Higher temperatures, an extended growing season and eutrophication can cause an accelerated growth of trees in urban regions across, across all climatic zones. However, an accelerated growth rate can have negative consequences like quicker ageing and tree death resulting in higher costs for new plantings and tree management as well as the decrease in ecosystem services due to a lack of old trees providing greatest benefits for mitigating the negative effects of the urban climate.

Influence of the heat irrigating effect of radiofrequency ablation on regional liver tissue in Bama miniature pigs

BACKGROUND The results of the heat irrigating effect of radiofrequency ablation(RFA)are uncertain,and the accurate impact of the heat irrigating effect on regional liver tissue is unknown due to a lack of control experiments.AIM The aim of this study was to determine the influence of the heat irrigating effect of RFA on regional liver tissue in Bama miniature pigs.METHODS Eight Bama miniature pigs were randomly divided into the observation group(group A)and the control group(group B),with 4 pigs/group.An RFA electrode needle was implanted near the hepatic segment vasculature(3-5 mm from the hepatic segment portal vein)under ultrasound guidance in group A.Similarly,an RFA electrode needle was implanted far from the hepatic segment vasculature(8-10 mm from the hepatic segment portal vein)in group B.The left internal lobe and right medial lobe were chosen as RFA sites in each pig.RFA was performed at the left internal lobe on day one in each pig,and at the right medial lobe 7 d later.Each RFA lasted 12 min.The general status of the pigs and serious complications were observed during the perioperative period.The pigs were sacrificed and the livers were removed immediately after RFA on the eighth day.The samples were roughly observed.Hematoxylin-eosin and Ki67 staining,as well as TUNEL detection,were performed on the tissue sections.RESULTS All 8 animals successfully underwent ultrasound-guided RFA.No serious complications,such as massive hemorrhage,biliary fistula,severe pleural effusion,pneumothorax,peripheral organ failure,or renal failure occurred in any of the animals during the perioperative period.The RFA coagulative necrosis lesion was spherical and the surrounding liver tissue showed an inflammatory response.The difference in the Suzuki score of the liver tissue surrounding the ablated portal vein,and its distal area between groups A and B,was statistically significant(P<0.05).More apoptotic cells were seen in liver tissue surrounding the ablated portal vein and its distal area in group A,while fewer apoptotic cells in the same area were seen in group B.The difference in the apoptotic index of the above area between group A and group B was statistically significant(P<0.05).Cells staining positive for Ki67 were observed in liver tissue at the left internal lobe around the ablated portal vein and its distal area in group A.No Ki67 staining positive cells were observed in other tissue sections.The difference in the Ki67 staining positive index in the above area was statistically significant(P<0.05)between group A and group B.CONCLUSION Changes as a result of thermal damage occur in liver tissue around the ablated portal vein and its distal area due to the heat irrigating effect when the RFA electrode tip is close to(<5 mm)the portal vein.

EFFECTS OF SOME PHENYLETHYNYLSILICON COMPOUNDS ON HEAT-CURABLE SILICONE RUBBER Ⅲ 1, 1, 3, 3-TETRAMETHYL-1, 3-DIPHENYLETHYNYL-DISILOXANE

We have shown that some phenylethynylsilicon compounds are good cure crosslinkersof heat-curable silicone rubber(HCSR). In this paper the effects of 1, 1, 3, 3-tetramethyl-1, 3-diphenylethynyldisiloxane (TMDPDS) as a crosslinker on HCSR were studied. Thevulcanizates with fine mechanical properties could be obtained with suitable amounts ofTMDPDS. Sol fractions, and crosslinking density of vulcanizates and vulcanizationretardation effect of TMDPDS on hydrosilation curing silicone rubber were also discussed.