Research Progress in Production Process of Molybdenum Disilicide Based Heating Elements in China

The molybdenum disilicide （MoSi2 ） based heating element is more and more important in modern industries relating to thermal treatment, melting and sintering due to its high working temperature. In China, the consumption of the MoSi2 heating element continues to increase with development and upgrading of industries. However, the MoSi2 heating element .from local manufacturers still has poor quality and thus results in waste of precious molybdenum resource. In this review, the recent research results of production process of MoSi2 heating elements were briefly summarized. The purity and particle size distribution of starting MoSi2 powder as well as the mixing and sintering processes were identified as major impact fators on the performance of MoSi2 heating elements. This review points out the improving direction for local MoSi2 heating elements.

Relationship Between Electric Properties and Temperature of ZrB_2-SiC Composite Ceramic Heating Element

ZrB2 -SiC composite ceramic has been successfully introduced as heating element in super high temperature .field. This paper further investigated the microstructure of ZrB2 - SiC composite ceramic heating element and the relationship between electric properties and temperature. SEM photos show that the heating element consists of SiC grains and ZrBz grains smaller than 10 μm. The voltage and current gradually increase and the furnace tempera- ture rises lineally with heating time prolonging. The electric resistance increases linearly with the temperature rising. The service temperatltre of the heating element can reach 1 800 ℃ and 2 150 ℃ in air and argon at- mosphere, respectively.

Radiation heat transfer model for complex superalloy turbine blade in directional solidification process based on finite element method

For the sake of a more accurate shell boundary and calculation of radiation heat transfer in the Directional Solidification(DS) process, a radiation heat transfer model based on the Finite Element Method(FEM)is developed in this study. Key technologies, such as distinguishing boundaries automatically, local matrix and lumped heat capacity matrix, are also stated. In order to analyze the effect of withdrawing rate on DS process,the solidification processes of a complex superalloy turbine blade in the High Rate Solidification(HRS) process with different withdrawing rates are simulated; and by comparing the simulation results, it is found that the most suitable withdrawing rate is determined to be 5.0 mm·min^(-1). Finally, the accuracy and reliability of the radiation heat transfer model are verified, because of the accordance of simulation results with practical process.

Streamline upwind finite element method for conjugate heat transfer problems

This paper presents a combined finite element method for solving conjugate heat transfer problems where heat conduction in a solid is coupled with heat convection in viscous fluid flow. The streamline upwind finite element method is used for the analysis of thermal viscous flow in the fluid region, whereas the analysis of heat conduction in solid region is performed by the Galerkin method. The method uses the three-node triangular element with equal-order interpolation functions for all the variables of the velocity components, the pressure and the temperature. The main advantage of the proposed method is to consistently couple heat transfer along the fluid-solid interface. Three test cases, i.e. conjugate Couette flow problem in parallel plate channel, counter-flow in heat exchanger, and conjugate natural convection in a square cavity with a conducting wall, are selected to evaluate the efficiency of the present method.

Hybrid graded element model for transient heat conduction in functionally graded materials

This paper presents a hybrid graded element model for the transient heat conduction problem in functionally graded materials （FGMs）. First, a Laplace transform approach is used to handle the time variable. Then, a fundamental solution in Laplace space for FGMs is constructed. Next, a hybrid graded element is formulated based on the obtained fundamental solution and a frame field. As a result, the graded properties of FGMs are naturally reflected by using the fundamental solution to interpolate the intra-element field. Further, Stefest＇s algorithm is employed to convert the results in Laplace space back into the time-space domain. Finally, the performance of the proposed method is assessed by several benchmark examples. The results demonstrate well the efficiency and accuracy of the proposed method.

Thermal stress in SiC element used in heat exchanger

An especial snake SiC pipe was designed for collecting losing heat from furnaces. The three-dimensions thermal, fluid and thermal stress coupled field of heat exchanger was analyzed by using the commercial engineering computer package ANSYS. The structural and operational parameters of heat exchanger, the junction between standpipe and snake pipe, the diameter of snake pipe, ratio of thickness to diameter of pipe, velocity of inlet air were optimized for thermal stress. The computed results show that the large thermal stress exits in the SiC, and the stand pipe should be ellipse for the least thermal stress; the optimal ratio of thickness to diameter of pipe is 6, the velocity of inlet air is 25 m/s. The most thermal stress is in inverse proportion to diameter of pipe and velocity of inlet air.

On the radiogenic heat production of igneous rocks

Radiogenic heat production is a physical parameter crucial to properly estimating lithospheric temperatures and properly understanding processes related to the thermal evolution of the Earth. Yet heat production is, in general, poorly constrained by direct observation because the key radiogenic elements exist in trace amounts making them difficulty image geophysically. In this study, we advance our knowledge of heat production throughout the lithosphere by analyzing chemical analyses of 108,103 igneous rocks provided by a number of geochemical databases. We produce global estimates of the average and natural range for igneous rocks using common chemical classification systems. Heat production increases as a function of increasing felsic and alkali content with similar values for analogous plutonic and volcanic rocks. The logarithm of median heat production is negatively correlated(r^2=0.98)to compositionally-based estimates of seismic velocities between 6.0 and 7.4 km s^(-1), consistent with the vast majority of igneous rock compositions. Compositional variations for continent-wide models are also well-described by a log-linear correlation between heat production and seismic velocity. However, there are differences between the log-linear models for North America and Australia, that are consistent with interpretations from previous studies that suggest above average heat production across much of Australia. Similar log-linear models also perform well within individual geological provinces with^1000 samples. This correlation raises the prospect that this empirical method can be used to estimate average heat production and natural variance both laterally and vertically throughout the lithosphere. This correlative relationship occurs despite a direct causal relationship between these two parameters but probably arises from the process of differentiation through melting and crystallization.

BRAKE TEST OF SiCp/A356 BRAKE DISK AND INTERPRETATION OF EXPERIMENTAL RESULTS

Material properties are obvious different between aluminum matrix composites and iron and steel materials. After the brake disk braked at the same speed, the average temperature of the aluminum brake disk is 1.5 times as high as one of iron and steel brake disk, the thermal expansion value of the aluminum brake disk is 2 times as big as one of iron and steel brake disk. Mechanical property of the material decreases with the temperature increasing generally during braking, on the other hand, the big thermal stress in the brake disk happens because the material expansion is constrained. Firstly, the reasons of the thermal stress generation and the fracture failure of brake disks during braking are analyzed qualitatively by virtue of three-bar stress frame and sandwich deformation principles in physic, and then the five constraints which cause the thermal stress are summarized. On the base of the experimental results on the 1：1 emergency brake test, the thermal stress and temperature fields are simulated; The behavior of the fracture failure is interpreted semi-quantitatively by finite element analysis, There is the coincident forecast for the fraction position in term of the two methods. In the end, in the light of the analysis and calculation results, it is the general principles observed by the structure design and assembly of the brake disk that are summarized.

Design and Implementation of a System for Laser Assisted Milling of Advanced Materials

Laser assisted machining is an effective method to machine advanced materials with the added benefits of longer tool life and increased material removal rates. While extensive studies have investigated the machining properties for laser assisted milling（LAML）, few attempts have been made to extend LAML to machining parts with complex geometric features. A methodology for continuous path machining for LAML is developed by integration of a rotary and movable table into an ordinary milling machine with a laser beam system. The machining strategy and processing path are investigated to determine alignment of the machining path with the laser spot. In order to keep the material removal temperatures above the softening temperature of silicon nitride, the transformation is coordinated and the temperature interpolated, establishing a transient thermal model. The temperatures of the laser center and cutting zone are also carefully controlled to achieve optimal machining results and avoid thermal damage. These experiments indicate that the system results in no surface damage as well as good surface roughness, validating the application of this machining strategy and thermal model in the development of a new LAML system for continuous path processing of silicon nitride. The proposed approach can be easily applied in LAML system to achieve continuous processing and improve efficiency in laser assisted machining.

Modeling effects of alloying elements and heat treatment parameters on mechanical properties of hot die steel with back-propagation artificial neural network

Materials data deep-excavation is very important in materials genome exploration.In order to carry out materials data deep-excavation in hot die steels and obtain the relationships among alloying elements,heat treatment parameters and materials properties,a 11×12×12×4 back-propagation（BP）artificial neural network（ANN）was set up.Alloying element contents,quenching and tempering temperatures were selected as input;hardness,tensile and yield strength were set as output parameters.The ANN shows a high fitting precision.The effects of alloying elements and heat treatment parameters on the properties of hot die steel were studied using this model.The results indicate that high temperature hardness increases with increasing alloying element content of C,Si,Mo,W,Ni,V and Cr to a maximum value and decreases with further increase in alloying element content.The ANN also predicts that the high temperature hardness will decrease with increasing quenching temperature,and possess an optimal value with increasing tempering temperature.This model provides a new tool for novel hot die steel design.

Discrete element method for high-temperature spread in compacted powder systems

The discrete element method is applied to investigate high-temperature spread in compacted metallic particle systems formed by high-velocity compaction. Assuming that heat transfer only occurs at contact zone between particles, a discrete equation based on continuum mechanics is proposed to investigate the heat flux. Heat generated internally by friction between moving particles is determined by kinetic equations. For the proposed model, numerical results are obtained by a particle-flow-code-based program. Temperature profiles are determined at different locations and times. At a fixed location, the increase in temperature shows a logarithmic relationship with time. Investigation of three different systems indicates that the geometric distribution of the particulate material is one of the main influencing factors for the heat conduction process. Higher temperature is generated for denser packing, and vice versa. For smaller uniform particles, heat transfers more rapidly.

Characteristics of the transient thermal load and deformation of the evacuated receiver in solar parabolic trough collector

As a core element in solar parabolic trough collector, the evaluated receiver often runs under severe thermal conditions. Worse still, the transient thermal load is more likely to cause structural deformation and damage. This work develops an efficient transient multi-level multi-dimensional(M2) analysis method to address photo-thermal-elastic problems, thereby estimating transient thermal load and deformation for the receiver:(i) one-dimensional(1-D) thermo-hydraulic model is adopted to determine the transient thermo-hydraulic state,(ii) 3-D finite volume method(FVM) model for the receiver tube is established to obtain the real-time temperature distribution,(iii) 3-D finite element method(FEM) model is employed to make thermoelastic analysis. Based on this M2 method, the typical transient cases are conducted in cold-start, disturbed-operation and regulatedprocess. Three indicators(average temperature of the wall(ATW), radial temperature difference(RTD), circumferential temperature difference(CTD)) are defined for overall analysis of the receiver thermal load. It is found that in the transient process,receivers face response delay and endure significant thermal load fluctuation. The response time for a single HCE(heat collecting element) under lower mass flow rate(1.5 kg s-1) could sustain 280 s. During the cold-start stage(DNI=200 W m-2 to 800 W m-2), the maximum value of CTD in receiver is as high as 11.67℃, corresponding to a maximum deflection of 1.05 cm.When the mass flow rate decreases sharply by 80%, the CTD reaches 33.04℃, causing a 2.06-cm deflection. It should be pointed out that in the cold-start stage and the lower mass flow rate operation for solar parabolic trough collector, alleviating the transient thermal load and deformation is of importance for safely and efficiently running evaluated receiver.

Heat Transfer,Knock Modeling and Cyclic Variability in a “Downsized”Spark-Ignition Turbocharged Engine

In the present paper a combined procedure for the quasi-dimensional modelling of heat transfer,combustion and knock phenomena in a “downsized”Spark Ignition two-cylinder turbocharged engine is presented.The procedure is extended to also include the effects consequent the Cyclic Variability.Heat transfer is modelled by means of a Finite Elements model.Combustion simulation is based on a fractal description of the flame front area.Cyclic Variability(CV)is characterized through the introduction of a random variation on a number of parameters controlling the rate of heat release(air/fuel ratio,initial flame kernel duration and radius,laminar flame speed,turbulence intensity).The intensity of the random variation is specified in order to realize a Coefficient Of Variation(COV)of the Indicated Mean Effective Pressure(IMEP)similar to the one measured during an experimental campaign.Moreover,the relative importance of the various concurring effects is established on the overall COV.A kinetic scheme is then solved within the unburned gas zone,characterized by different thermodynamic conditions occurring cycle-by-cycle.In this way,an optimal choice of the “knock-limited”spark advance is effected and compared with experimental data.Finally,the CV effects on the occurrence of individual knocking cycles are assessed and discussed.

Controlling Thermodynamic Properties of Ferromagnetic Group-Ⅳ Graphene-Like Nanosheets by Dilute Charged Impurity

Using the Kane-Mele Hamiltonian, Dirac theory and self-consistent Born approximation, we investigate the effect of dilute charged impurity on the electronic heat capacity and magnetic susceptibility of two-dimensional ferromagnetic honeycomb structure of group-Ⅳ elements including silicene, germanene and stanene within the Green's function approach. We also find these quantities in the presence of applied external electric field. Our results show that the silicene(stanene) has the maximum(minimum) heat capacity and magnetic susceptibility at uniform electric fields. From the behavior of theses quantities, the band gap has been changed with impurity concentration, impurity scattering strength and electric field. The analysis on the impurity-dependent magnetic susceptibility curves shows a phase transition from ferromagnetic to paramagnetic and antiferromagnetic phases. Interestingly, electronic heat capacity increases(decreases) with impurity concentration in silicene(germanene and stanene) structure.