On-Line Life Monitoring Technique for Tube Bundles of Boiler High-Temperature Heating Surface

High-temperature heating surface such as superheater and reheater of large-sized utility boiler all experiences a relatively severe working conditions. The failure of boiler tubes will directly impact the safe and economic operation of boiler. An on-line life monitoring model of high-temperature heating surface was set up according to the well-known L-M formula of the creep damages. The tube wall metal temperature and working stress was measured by on-line monitoring, and with this model, the real-time calculation of the life expenditure of the heating surface tube bundles were realized. Based on the technique the on-line life monitoring and management system of high-temperature heating surface was developed for a 300 MW utility boiler. An effective device was thus suggested for the implementation of the safe operation and the condition-based maintenance of utility boilers.

Effects of surface heating on precipitation over the Tibetan Plateau and its eastern margin

The high terrain of the Tibetan Plateau(TP)has a very important impact on the weather and climate of China,East Asia,South Asia,and even the Northern Hemisphere.However,in recent years,the reasons for the decrease in precipitation in the southeastern edge of the plateau have resulted in cutting-edge research regarding the impact of the TP and its surrounding areas on downstream weather and climate.In this study,the spatial and temporal distribution of surface heat flux and precipitation were analyzed from 1998 to 2022,and the possible mechanism of the decrease of precipitation in the eastern edge of the plateau is explored.The main conclusions are as follows:The annual average sensible heat flux in the TP and its east side is positive,with an average of 33.73 W/m^(2).The annual average latent heat flux is positive,with an average of 42.71 W/m^(2).Precipitation has a similar annual average and seasonal distribution,with modest amounts in the northwest and substantial amounts in the southeast.The average annual accumulated precipitation is 670.69 mm.The first mode of the Empirical Orthogonal Function(EOF)shows that sensible heat flux decreases first,then increases,and then finally decreases during 1998–2022.The modes show the opposite trend in middle part of the plateau.The latent heat flux initially decreases,then increases,and finally decreases in the western plateau and near Sichuan Basin.The mode,however,displays the opposite tendency throughout the rest of the region.The precipitation in the north and south sides of the plateau has decreased since 2013,which is consistent with the changing trend of sensible heat flux.In the rest of the region,the change trend is not obvious.The sensible heat of the main body of the plateau and its east side and Sichuan Basin is negatively correlated with precipitation,that is,when sensible heat flux of the main body of the plateau and its east side and Sichuan Basin is more(less),local precipitation is less(more).The latent heat of the main body of the plateau and its east side,Sichuan Basin is positively correlated with precipitation,indicating that when latent heat flux of the main body of the plateau and its east side,Sichuan Basin is more(less),local precipitation is more(less).

Variation in the surface heat flux on the north and south slopes of Mount Qomolangma

The distinctive conditions present on the north and south slopes of Mount Qomolangma,along with the intricate variations in the underlying surfaces,result in notable variations in the surface energy flux patterns of the two slopes.In this paper,data from TESEBS(Topographical Enhanced Surface Energy Balance System),remote sensing data from eight cloud-free scenarios,and observational data from nine stations are utilized to examine the fluctuations in the surface heat flux on both slopes.The inclusion of MCD43A3 satellite data enhances the surface albedo,contributing to more accurate simulation outcomes.The model results are validated using observational data.The RMSEs of the net radiation,ground heat,sensible heat,and latent heat flux are 40.73,17.09,33.26,and 30.91 W m^(−2),respectively.The net radiation flux is greater on the south slope and exhibits a rapid decline from summer to autumn.Due to the influence of the monsoon,on the north slope,the maximum sensible heat flux occurs in the pre-monsoon period in summer and the maximum latent heat flux occurs during the monsoon.The south slope experiences the highest latent heat flux in summer.The dominant flux on the north slope is sensible heat,while it is latent heat on the south slope.The seasonal variations in the ground heat flux are more pronounced on the south slope than on the north slope.Except in summer,the ground heat flux on the north slope surpasses that on the south slope.

Assessment of the Southern Ocean Sea Surface Temperature Biases in CMIP5 and CMIP6 Models

This work evaluates the performances of climate models in simulating the Southern Ocean(SO)sea surface temperature(SST)by a large ensemble from phases 5 and 6 of the Coupled Model Intercomparison Project(CMIP5 and CMIP6).By combining models from the same community sharing highly similar SO SST biases and eliminating the effect of global-mean biases on local SST biases,the results reveal that the ensemble-mean SO SST bias at 70°-30°S decreases from 0.38℃ in CMIP5 to 0.28℃ in CMIP6,together with increased intermodel consistency.The dominant mode of the intermodel variations in the zonal-mean SST biases is characterized as a meridional uniform warm bias pattern,explaining 79.1% of the intermodel variance and exhibiting positive principal values for most models.The ocean mixed layer heat budget further demonstrates that the SST biases at 70°-50°S primarily result from the excessive summertime heating effect from surface net heat flux.The biases in surface net heat flux south of 50°S are largely impacted by surface shortwave radiation from cloud and clear sky components at different latitudes.North of 50°S,the underestimated westerlies reduce the northward Ekman transport and hence northward cold advection in models,leading to warm SST biases year-round.In addition,the westerly biases are primarily traced back to the atmosphere-alone model simulations forced by the observed SST and sea ice.These results disclose the thermal origin at the high latitude and dynamical origin at the low latitude of the SO SST biases and underscore the significance of the deficiencies of atmospheric models in producing the SO SST biases.

The Heat Transfer Coefficients of the Heating Surface of 300 MWe CFB Boiler

A study of the heat transfer about the heating surface of three commercial 300 MWe CFB boilers was conducted in this work. The heat transfer coefficients of the platen heating surface, the external heat exchanger (EHE) and cyclone separator were calculated according to the relative operation data at different boiler loads. Moreover, the heat transfer coefficient of the waterwall was calculated by heat balance of the hot circuit of the CFB boiler. With the boiler capacity increasing, the heat transfer coefficients of these heating surface increases, and the heat transfer coefficient of the water wall is higher than that of the platen heating surface. The heat transfer coefficient of the EHE is the highest in high boiler load, the heat transfer coefficient of the cyclone separator is the lowest. Because the fired coal is different from the design coal in No.1 boiler, the ash content of the fired coal is much lower than that of the design coal. The heat transfer coefficients which calculated with the operation data are lower than the previous design value and that is the reason why the bed temperature is rather high during the boiler operation in No.1 boiler.

Impact of Surface Sensible Heating over the Tibetan Plateau on the Western Pacific Subtropical High: A Land–Air–Sea Interaction Perspective

The impact of surface sensible heating over the Tibetan Plateau （SHTP） on the western Pacific subtropical high （WPSH） with and without air-sea interaction was investigated in this study. Data analysis indicated that SHTP acts as a relatively independent factor in modulating the WPSH anomaly compared with ENSO events. Stronger spring SHTP is usually fol- lowed by an enhanced and westward extension of the WPSH in summer, and vice versa. Numerical experiments using both an AGCM and a CGCM confirmed that SHTP influences the large-scale circulation anomaly over the Pacific, which features a barotropic anticyclonic response over the northwestern Pacific and a cyclonic response to the south. Owing to different background circulation in spring and summer, such a response facilitates a subdued WPSH in spring but an en- hanced WPSH in summer. Moreover, the CGCM results showed that the equatorial low-level westerly at the south edge of the cyclonic anomaly brings about a warm SST anomaly （SSTA） in the equatorial central Pacific via surface warm advection. Subsequently, an atmospheric Rossby wave is stimulated to the northwest of the warm SSTA, which in turn enhances the at- mospheric dipole anomalies over the western Pacific. Therefore, the air-sea feedbacks involved tend to reinforce the effect of SHTP on the WPSH anomaly, and the role of SHTP on general circulation needs to be considered in a land-air-sea interaction framework.

The Effects of Anomalous Snow Cover of the Tibetan Plateau on the Surface Heating

On the basis of snow data and AWS (Automatic Weather Station) data obtained from the Tibetan Plateau in recent years (1993 to 1999), the features of sensible heat, latent heat and net long-wave radiations are estimated, and their variations in more-snow year (1997/ 1998) and less-snow year (1996/ 1997) are analyzed comparatively. The relationships between snow cover of the Tibetan Plateau and plateau’s surface heating to the atmospheric heating are also discussed. The difference between more-snow and less-snow year in spring is remarkably larger than that in winter. Therefore, the effect of anomalous snow cover of the Tibetan Plateau in winter on the plateau heating appears more clearly in the following spring of anomalous snow cover. Key words Tibetan Plateau - Snow cover - Effects - Surface heat fluxes This research was supported by the National Key Programme for Developing Basic Sciences G1998040900 (I), National Natural Science Foundation of China (40075018) and Sichuan Youth Science and Technology Fund.

The Regional Surface Heating Field over the Heterogeneous Landscape of the Tibetan Plateau Using MODIS and In Situ Data

In this study, a parameterization scheme based on Moderate Resolution Imaging Spectroradiometer （MODIS） data and in-situ data was tested for deriving the regional surface heating field over a heterogeneous landscape. As a case study, the methodology was applied to the whole Tibetan Plateau （TP） area. Four images of MODIS data （i.e., 30 January 2007, 15 April 2007, 1 August 2007, and 25 October 2007） were used in this study for comparison among winter, spring, summer, and autumn. The results were validated using the observations measured at the stations of the Tibetan Observation and Research Platform （TORP）. The results show the following： （1） The derived surface heating field for the TP area was in good accord with the land-surface status, showing a wide range of values due to the strong contrast of surface features in the area. （2） The derived surface heating field for the TP was very close to the field measurements （observations）. The APD （absolute percent difference） between the derived results and the field observations was 〈10%. （3） The mean surface heating field over the TP increased from January to April to August, and decreased in October. Therefore, the reasonable regional distribution of the surface heating field over a heterogeneous landscape can be obtained using this methodology. The limitations and further improvement of this method are also discussed.

Characteristics of the Seasonal Variation of the Surface TotalHeating over the Tibetan Plateau and Its Surrounding Areain Summer 1998 and Its Relationship with the Convectionover the Subtropical Area of the Western Pacific

Using the dataset of 1998 TIPEX, the data of 6 automatic heat balance observational stations (AWS) from May to August 1998, a dataset of 52 surface observational stations over the Tibetan Plateau (TP) and its adjacent region, the daily rainfall amounts from about 300 stations in China, the outgoing longwave radiation (OLR) data received by the National Satellite Meteorological Center(NSMC) of China, and TBB data from GMS remote sensing of Japan, the characteristics of the seasonal variation of the surface total heating over TP and its surrounding area in summer 1998 and its relationship with the convection over the subtropical area of the western Pacific is studied in this paper. The results show that the surface total heating over TP had a close relationship with the onset of the rainy season, and after the onset of the rainy season, the regional mean surface total heating over TP decreased distinctly. Furthermore, the regional mean surface total heating over TP had very good negative correlation with TBB over the subtropical area of the western Pacific along 20–30°N, which shows that the surface total heating over TP was able to affect the convection over the subtropical area of the western Pacific.

The Scandinavia Ozone Loss and Surface Heating

Analysis on NASA Total Ozone Mapping Spectrometer (TOMS) ozone shows a clear ozone loss, ?50 DU (15% of the total ozone), over Scandinavia. Correlation analysis between the ozone loss and the east-to-west sea surface temperature (SST) contrast in the North Atlantic shows correlation coefficients ?0.96 for seasonal variation and ?0.70 for monthly mean (168 months) in 1979–1992. Correlation coefficients between the ozone loss and the surface-to-atmosphere heat fluxes are higher than ?0.87. There-fore the authors suggest that the warm Atlantic current carries energy northward to Scandina via and causes ozone loss there via the surface-to-atmosphere heating processes. Key words Ozone loss - North Atlantic - Surface heating - Scandina via This work was supported by the key project KZ951-A-205-05 of CAS, NSFC Project 40075029, IAP innovation project 8-2212, CAS, First Chinese Arctic Expedition of NOA and LAPC of IAP, CAS.

Variations in Surface Urban Heat Island and Urban Cool Island Intensity:A Review Across Major Climate Zones

The climate has an impact on the urban thermal environment,and the magnitude of the surface urban heat island(SUHI)and urban cool island(UCI)vary across the world’s climatic zones.This literature review investigated:1)the variations in the SUHI and UCI intensity under different climatic backgrounds,and 2)the effect of vegetation types,landscape composition,urban configuration,and water bodies on the SUHI.The SUHI had a higher intensity in tropical(Af(tropical rainy climate,Köppen climate classification),Am(tropical monsoon climate),subtropical(Cfa,subtropical humid climate),and humid continental(Dwa,semi-humid and semi-arid monsoon climate)climate zones.The magnitude of the UCI was low compared to the SUHI across the climate zones.The cool and dry Mediterranean(Cfb,temperate marine climate;Csb,temperate mediterranean climate;Cfa)and tropical climate(Af)areas had a higher cooling intensity.For cities with a desert climate(BWh,tropical desert climate),a reverse pattern was found.The difference in the SUHI in the night-time was greater than in the daytime for most cities across the climate zones.The extent of green space cooling was related to city size,the adjacent impervious surface,and the local climate.Additionally,the composition of urban landscape elements was more significant than their configuration for sustaining the urban thermal environment.Finally,we identified future research gaps for possible solutions in the context of sustainable urbanization in different climate zones.

Exploration of regional surface average heat flow from meteorological and geothermal series

We attempt to compute the Surface Average Heat Flow （SAHF） from long-term temperature observations of one hundred seventy-seven observational points at the depths of 0.8, 1.6, and 3.2 m, which were relatively evenly distributed in China's Mainland. We first employ Fourier transformation to remove the influence of atmospheric temperature variations from the observation series, which are classified into the type of the steady-state temperature monotonously increasing with depth （type I） and other three types. Then we compare our results obtained from the data of type I, of which the values are thought to equal to those of the mean borehole heat flow, with those obtained from traditional heat flow observations mainly distributed in North China Craton. In computations of the SAHF at the observation stations, we deduce the thermal diffusivity and volumetric specific heat of the soil by employing harmonic solutions of the heat conduction equation for the same moisture group as the first step, and then we determine the SAHF using Fourier＇s law. Our results indicate that the SAHF derived from shallow earth geothermal data can reflect the heat flow field to a large extent.

A Modeling Study of Land Surface Process Impacts on Inland Behavior of Typhoon Rananim(2004)

On 12 August 2004, Typhoon Rananim （0414） moved inland over China and stagnated over the Poyang Lake area, resulting in torrential rainfall and severe geologic hazards. The Advanced Weather Research and Forecasting （ARW-WRF） model and its different land surface models （LSMs） were employed to study the impacts of land surface process on the inland behavior of Typhoon Rananim. Results show that simulations, coupled with LSMs or not, have no significant differences in predicting typhoon track, intensity, and largescale circulation. However, the simulations of mesoscale structure, rainfall rate, and rainfall distribution of typhoon are more reasonable with LSMs than without LSMs. Although differences are slight among LSMs, NOAH is better than the others. Based on outputs using the NOAH scheme, the interaction between land surtace and typhoon was explored in this study. Notably, typhoon rainfall and cloud cover can cool land surface, but rainfall expands the underlying saturated wetland area, which exacerbates the asymmetric distribution of surface heat fluxes. Accordingly, an energy frontal zone may form in the lower troposphere that enhances ascending motion and local convection, resulting in heavier rainfall. Moreover, the expanded underlying saturated wetlands provide plentiful moisture and unstable energy for the maintenance of Typhoon Rananim and increased rainfall in return.

Parameterization of Heat Fluxes at Heterogeneous Surfaces by Integrating Satellite Measurements with Surface Layer and Atmospheric Boundary Layer Observations

The regional heat flux exchange between heterogeneous landscapes and the nearby surface layer （SL） is a key issue in the study of land-atmosphere interactions over arid areas such as the Heihe River basin in northwestern China and in high elevation areas such as the Tibetan Plateau. Based on analysis of the land surface heterogeneity and its effects on the overlying air flow, the use of SL observations, atmospheric boundary layer （ABL） observations, and satellite remote sensing （RS） measurements along with three parameterization methodologies （here, termed as the RS, tile, and blending approaches） have been proposed to estimate the surface heat flux densities over heterogeneous landscapes. The tile and blending approaches have also been implemented during HEIhe basin Field Experiment （HEIFE）, the Coordinated Enhanced Observing Period （CEOP） Asia-Australia Monsoon Project on the Tibetan Plateau （CAMP/Tibet）, the Arid Environment Comprehensive Monitoring Plan ＇95 （AECMP＇95）, and the DunHuang Experiment （DHEX）. The results showed that these two proposed parameterization methodologies can be accurately used over heterogeneous land surfaces.

Seasonal Variability of the Yellow Sea/East China Sea Surface Fluxes and Thermohaline Structure

We use the U.S. Navy's Master Oceanographic Observation Data Set (MOODS) forthe Yellow Sea/ East China Sea (YES) to investigate the climatological water mass features and theseasonal and non-seasonal variabilities of the thermohaline structure, and use the ComprehensiveOcean-Atmosphere Data Set (COADS) from 1945 to 1989 to investigate the linkage between the fluxes(momentum, heat, and moisture) across the air-ocean interface and the formation of the water massfeatures. After examining the major current systems and considering the local bathymetry and watermass properties, we divide YES into five regions: East China Sea (ECS) shelf, Yellow Sea (YS) Basin,Cheju bifurcation (CB) zone, Taiwan Warm Current (TWC) region, Kuroshio Current (KC) region. Thelong term mean surface heat balance corresponds to a heat loss of 30 W m^(-2) in the ESC and CBregions, a heat loss of 65 W m^(-2) in the KC and TWC regions, and a heat gain of 15 W m^(-2) in theYS region. The surface freshwater balance is defined by precipitation minus evaporation. The annualwater loss from the surface for the five subareas ranges from 1.8 to 4 cm month^(-1). The freshwater loss from the surface should be compensated for from the river run-off. The entire watercolumn of the shelf region (ECS, YS, and CB) undergoes an evident seasonal thermal cycle withmaximum values of temperature during summer and maximum mixed layer depths during winter. However,only the surface waters of the TWC and KC regions exhibit a seasonal thermal cycle.. We also foundtwo different relations between surface salinity and the Yangtze River run-off, namely, out-of-phasein the East China Sea shelf and in-phase in the Yellow Sea. This may confirm an earlier study thatthe summer fresh water discharge from the Yangtze River forms a relatively shallow, low salinityplume-like structure extending offshore on average towards the northeast.

Seasonal evolution of the dominant modes of the Eurasian snowpack and atmospheric circulation from autumn to the subsequent spring and the associated surface heat budget

This study investigates the seasonal evolution of the dominant modes of the Eurasian snowpack and atmospheric circulation from autumn to the subsequent spring using snow water equivalent （SWE）, snow cover frequency （SCF）, and 500 hPa geopotential height data. It is found that the Eurasian SWE/SCF and circulation dominant modes are stably coupled from autumn to the subsequent spring.The temporal coherence of the seasonal evolution of the dominant modes is examined.The seasonal evolution of the Eurasian circulation and SWE dominant modes exhibit good coherence, whereas the evolution of the Eurasian SCF dominant mode is incoherent during the autumn-winter transition season. This incoherence is associated with a sign-change in the SCF anomalies in Europe during the autumn-winter transition season, which is related to the wind anomalies over Europe. In addition, the surface heat budget associated with the Eurasian SWE/SCF and circulation dominant modes is analyzed. The sensible heat flux （SHF） related to the wind-induced thermal advection dominates the surface heat budget from autumn to the subsequent spring, with the largest effect during winter. The surface net shortwave radiation is mainly modulated by snow cover rather than cloud cover, which is estimated to be as important as, or likely superior to, the SHF for the surface heat budget during spring.The NCEP-NCAR surface heat flux reanalysis data demonstrate a consistency with the SWE/SCF and air temperature observational data, indicating a good capability for snow-atmosphere interaction analysis.

Calculation and experimental study on heating temperature field of super-high strength aluminum alloy thick plate

Stepped heating treatment has been applied to aluminum alloy thick plate to improve the mechanical performance and corrosion resistance.Accurate temperature control of the plate is the difficulty in engineering application.The heating process,the calculation of surface heat transfer coefficient and the accurate temperature control method were studied based on measured heating temperature for the large-size thick plate.The results show that,the temperature difference between the surface and center of the thick plate is small.Based on the temperature uniformity,the surface heat transfer coefficient was calculated,and it is constant below300°C,but grows greatly over300°C.Consequently,a lumped parameter method(LPM)was developed to predict the plate temperature.A stepped solution treatment was designed by using LPM,and verified by finite element method(FEM)and experiments.Temperature curves calculated by LPM and FEM agree well with the experimental data,and the LPM is more convenient in engineering application.

Remote Sensing Parameterization of Land Surface Heat Fluxes over Arid and Semi-arid Areas

Dealing with the regional land surfaces heat fluxes over inhomogeneous land surfaces in arid and semi-arid areas is an important but not an easy issue. In this study, one parameterization method based on satellite remote sensing and field observations is proposed and tested for deriving the regional land surface heat fluxes over inhomogeneous landscapes. As a case study, the method is applied to the Dunhuang experimental area and the HEIFE (Heihe River Field Experiment, 1988-1994) area. The Dunhuang area is selected as a basic experimental area for the Chinese National Key Programme for Developing Basic Sciences: Research on the Formation Mechanism and Prediction Theory of Severe Climate Disaster in China (G1998040900, 1999-2003). The four scenes of Landsat TM data used in this study are 3 June 2000, 22 August 2000, and 29 January 2001 for the Dunhuang area and 9 July 1991 for the HEIFE area. The regional distributions of land surface variables, vegetation variables, and heat fluxes over inhomogeneous landscapes in arid and semi-arid areas are obtained in this study.

Influence of Late Springtime Surface Sensible Heat Flux Anomalies over the Tibetan and Iranian Plateaus on the Location of the South Asian High in Early Summer

Variation in the location of the South Asian High （SAH） in early boreal summer is strongly influenced by elevated surface heating from the Tibetan Plateau （TP） and the Iranian Plateau （IP）. Based on observational and ERA-Interim data, diagnostic analyses reveal that the interannual northwestward-southeastwaxd （NW-SE） shift of the SAH in June is more closely correlated with the synergistic effect of concurrent surface thermal anomalies over the TP and IP than with each single surface thermal anomaly over either plateau from the preceding May. Concurrent surface thermal anomalies over these two plateaus in May are characterized by a negative correlation between sensible heat flux over most parts of the TP （TPSH） and IP （IPSH）. This anomaly pattern can persist till June and influences the NW-SE shift of the SAH in June through the release of latent heat （LH） over northeastern India. When the IPSH is stronger （weaker） and the TPSH is weaker （stronger） than normal in May, an anomalous cyclone （anticyclone） appears over northern India at 850 hPa, which is accompanied by the ascent （descent） of air and anomalous convergence （divergence） of moisture flux in May and June. Therefore, the LH release over northeastern India is strengthened （weakened） and the vertical gradient of apparent heat source is decreased （increased） in the upper troposphere, which is responsible for the northwestward （southeastward） shift of the SAH in June.

Computation of synthetic surface heat transfer coefficient of 7B50 ultra-high-strength aluminum alloy during spray quenching

According to inverse heat transfer theory, the evolutions of synthetic surface heat transfer coefficient（SSHTC） of the quenching surface of 7B50 alloy during water-spray quenching were simulated by the Pro CAST software based on accurate cooling curves measured by the modified Jominy specimen and temperature-dependent thermo-physical properties of 7 B50 alloy calculated using the JMat Pro software. Results show that the average cooling rate at 6 mm from the quenching surface and 420-230 ℃（quench sensitive temperature range） is 45.78℃/s. The peak-value of the SSHTC is 69 kW/（m^2·K） obtained at spray quenching for 0.4 s and the corresponding temperature of the quenching surface is 160 ℃. In the initial stage of spray quenching, the phenomenon called ＂temperature plateau＂ appears on the cooling curve of the quenching surface. The temperature range of this plateau is 160-170℃ with the duration about 3 s. During the temperature plateau, heat transfer mechanism of the quenching surface transforms from nucleate boiling regime to single-phase convective regime.