In this paper,a new approach of meander line technique for Printed Quadrifilar Helix Antenna(PQHA) is studied.Compared with other meander line techniques,this approach has lowered the axial height of antenna greatly a...In this paper,a new approach of meander line technique for Printed Quadrifilar Helix Antenna(PQHA) is studied.Compared with other meander line techniques,this approach has lowered the axial height of antenna greatly and improved the efficiency of model-building in simulation processing.We have focused on the analysis of radiation pattern,axial ratio,and design graph for the Meander line Printed Quadrifilar Helix Antenna(MPQHA).Finally,we have reduced successfully 67% size in geometry compared with traditional PQHA method,and obtained rather reasonable results.展开更多
This paper deals with the investigation of the power absorption in helicon plasma excited through a half-helix antenna driven at 13.56 MHz. The simulations were carried out by means of a code,HELIC. They were carried ...This paper deals with the investigation of the power absorption in helicon plasma excited through a half-helix antenna driven at 13.56 MHz. The simulations were carried out by means of a code,HELIC. They were carried out by taking into account different inhomogeneous radial density profiles and for a wide range of plasma densities, from 10^(11) cm^(-3) to 10^(13) cm^(-3). The magnetic field was 200, 400, 600 and 1000 G. A three-parameter function was used for generating various density profiles with different volume gradients, edge gradients and density widths. The density profile had a large effect on the efficient Trivelpiece–Gould(TG) and helicon mode excitation and antenna coupling to the plasma. The fraction of power deposition via the TG mode was extremely dependent on the plasma density near the plasma boundary. Interestingly, the obtained efficient parallel helicon wavelength was close to the anticipated value for Gaussian radial density profile.Power deposition was considerably asymmetric when the n/B_0 ratio was more than a specific value for a determined density width. The longitudinal power absorption was symmetric at approximately n_0 =10^(11) cm^(-3), irrespective of the magnetic field supposed. The asymmetry became more pronounced when the plasma density was 10^(12) cm^(-3). The ratio of density width to the magnetic field was an important parameter in the power coupling. At high magnetic fields, the maximum of the power absorption was reached at higher plasma density widths. There was at least one combination of the plasma density, magnetic field and density width for which the RF power deposition at both side of the tube reached its maximum value.展开更多
A novel frequency-selective metamaterial with negative permittivity and permeability for improving directivity and gain of a helix antenna is presented in this paper.The proposed metamaterial is composed of two Z-shap...A novel frequency-selective metamaterial with negative permittivity and permeability for improving directivity and gain of a helix antenna is presented in this paper.The proposed metamaterial is composed of two Z-shape resonators printed on opposite sides of a dielectric substrate.Two forms of multilayered cells are found to be suitable for antennas and waveguides applications.In addition,a new method of designing a metamaterial-based helix antenna is presented with high directivity and gain.A comparison on radiation properties is given between the conventional and the new metamaterial-based helix antennas.Two comparisons on radiation properties are performed:(1) the effect of proposed Z-structure on monopole,dipole,and helix antennas;(2) the effect of OE3,split-ring resonator (SRR),and proposed Z-structure unit cells on the performance of helix antennas.The results show improvement of parameters such as directivity,gain,and radiation power of the new metamaterial-based helix antenna.Therefore,the combination of Z-structure with the helix antenna shows the best performance.展开更多
文摘In this paper,a new approach of meander line technique for Printed Quadrifilar Helix Antenna(PQHA) is studied.Compared with other meander line techniques,this approach has lowered the axial height of antenna greatly and improved the efficiency of model-building in simulation processing.We have focused on the analysis of radiation pattern,axial ratio,and design graph for the Meander line Printed Quadrifilar Helix Antenna(MPQHA).Finally,we have reduced successfully 67% size in geometry compared with traditional PQHA method,and obtained rather reasonable results.
文摘This paper deals with the investigation of the power absorption in helicon plasma excited through a half-helix antenna driven at 13.56 MHz. The simulations were carried out by means of a code,HELIC. They were carried out by taking into account different inhomogeneous radial density profiles and for a wide range of plasma densities, from 10^(11) cm^(-3) to 10^(13) cm^(-3). The magnetic field was 200, 400, 600 and 1000 G. A three-parameter function was used for generating various density profiles with different volume gradients, edge gradients and density widths. The density profile had a large effect on the efficient Trivelpiece–Gould(TG) and helicon mode excitation and antenna coupling to the plasma. The fraction of power deposition via the TG mode was extremely dependent on the plasma density near the plasma boundary. Interestingly, the obtained efficient parallel helicon wavelength was close to the anticipated value for Gaussian radial density profile.Power deposition was considerably asymmetric when the n/B_0 ratio was more than a specific value for a determined density width. The longitudinal power absorption was symmetric at approximately n_0 =10^(11) cm^(-3), irrespective of the magnetic field supposed. The asymmetry became more pronounced when the plasma density was 10^(12) cm^(-3). The ratio of density width to the magnetic field was an important parameter in the power coupling. At high magnetic fields, the maximum of the power absorption was reached at higher plasma density widths. There was at least one combination of the plasma density, magnetic field and density width for which the RF power deposition at both side of the tube reached its maximum value.
基金Project (No.8711109001) supported by the Office of Brilliant Talents at Semnan University,Iran
文摘A novel frequency-selective metamaterial with negative permittivity and permeability for improving directivity and gain of a helix antenna is presented in this paper.The proposed metamaterial is composed of two Z-shape resonators printed on opposite sides of a dielectric substrate.Two forms of multilayered cells are found to be suitable for antennas and waveguides applications.In addition,a new method of designing a metamaterial-based helix antenna is presented with high directivity and gain.A comparison on radiation properties is given between the conventional and the new metamaterial-based helix antennas.Two comparisons on radiation properties are performed:(1) the effect of proposed Z-structure on monopole,dipole,and helix antennas;(2) the effect of OE3,split-ring resonator (SRR),and proposed Z-structure unit cells on the performance of helix antennas.The results show improvement of parameters such as directivity,gain,and radiation power of the new metamaterial-based helix antenna.Therefore,the combination of Z-structure with the helix antenna shows the best performance.
