Comparative Study of Water-soluble and Alkali-soluble Hemicelluloses Extracted by Hydrothermal Pretreatment

The purpose of this study was to explore the differences of the hemicelluloses extracted by hydrothermal pretreatment using water and alkaline solutions(Na OH or KOH). The physicochemical properties and structural characteristics of two water-soluble and four alkali-soluble hemicelluloses extracted from the triploid of Populus tomentosa Carr. through the hydrothermal pretreatment were comparatively studied. It was observed that the alkalis(Na OH and KOH) were more effective than distilled water as extractants. Sugar analysis showed that xylose(66.83%~86.49%) was the major constituent, followed by glucose(6.83%~18.49%). Mannose(1.40%~8.42%), galactose(2.17%~4.05%), and arabinose(0.21%~2.26%) were also detected in the hemicellulosic fractions. The results of gelpermeation chromatography(GPC) indicated that the hemicelluloses extracted using the alkaline solutions had relatively higher molecular weights than those solubilized in distilled water. Further, based on spectroscopic ~1Hnuclear magnetic resonance(~1H-NMR) and two-dimensional heteronuclear singular quantum correlation(2D-HSQC) analyses, it was confirmed that the hemicellulosic fractions had a major structure of(1→4)-b-D-xylan and a minor structure of(1→4)-a-D-glucan with small amounts of substituted sugars and glucuronic acid attached.

Efficient hydrolysis of hemicellulose to furfural by novel superacid SO_4H-functionalized ionic liquids

Novel superacid SO_4H-functionalized ionic liquids(SFILs) were designed and prepared in this work. The catalytic activities of SFILs were evaluated in xylan hydrolysis and xylose dehydration to produce furfural. Combined with the results of acid strength of SFILs characterized by solid-state ^(31)P MAS NMR, it was found that the catalytic performance of SFILs was positively correlated to their acid strength. The superacid SFIL [Ch-SO_4H][CF_3SO_3] displayed the best catalytic performance with more than 80% yield of furfural, and it was also obviously superior to usual SO_3H-functionalized acidic ILs, mineral liquid acids, and acidic resin Amberlyst-15 catalysts in catalytic activity under optimized conditions. In addition, the superacid SFIL [Ch-SO_4H][CF_3SO_3] could be easily separated from reaction system and reused at least five times without obvious decrease.

Isolation of Hemicellulose from Wood Chips via Extraction with Kraft Green Liquor

The present paper covers the extraction of hemicelluloses from woods, i.e., Eucalyptus Globulus, white fir and Douglas fir via green liquor pretreatment and alkali post-treatment with sodium hydroxide. The effects of such extraction conditions as extraction time, temperature on the yields of hemicellulose and the degree of deliginification were investigated. Sugar analyses using Dionex indicate that xylose, glucose and mannose are the main sugar types present in the hemicellulose from Eucalyptus. Other sugar components such as arabinose and galactose were also found in Dogulas fir hemicellulose. The highest yield of hemicellulose was 8.4% for Eucalyptus extracted with green liquor at 130 ℃ for 3.5 h. Further sodium hydroxide extraction for 5 h gave a hemicellulose yield of about 20%. The use of green liquor for the extraction of wood hemicellulose is believed to be the first attempt.

Hemicellulose in corn straw:Extracted from alkali solution and produced5-hydroxymethyl furfural in HCOOH/HCOONa buffer solution

Hemicellulose in corn straw is a group of complex heteropolysaccharides which are composed of different sugar units, including mannans, xylans, arabinans and galactans. This study developed a simple and practical process for production of 5-hydroxymethyl furfural(HMF) using hemicellulose that was extracted from corn straw. In the hemicellulose degradation process HCOOH/HCOONa was used as buffer solution, and the optimum conditions for maximum HMF yield were explored. Various extraction conditions including NaOH concentration, reaction time,temperature, solid-to-liquid ratio and precipitant were tested for hemicellulose obtaining, giving the optimum condition of 55 °C, 4 h, solid-to-liquid ratio of 1:10, 1.5 mol·L^(-1) NaOH solution and ethanol as precipitant with the yield of 34.16%. Dehydration of hemicellulose under HCOOH/HCOONa buffer solution process, using solution medium of pH = 0.8 hydrolyzed hemicellulose in corn straw at 190 °C after 190 min and 82% of HMF yield was achieved.

Characterization of Hemicelluloses Extracted from Populus tomentosa Carr. by the Hydrothermal Method with Ethanol

The aim of this study was to investigate the hemicelluloses extracted from Populus tomentosa Carr.by the hydrothermal method with ethanol.The influence of ethanol concentration on the hemicellulosic fractions was systematically studied.The chemical compositions and structural features of the hemicellulosic fractions were investigated by a combination of sugar analysis,gel-permeation chromatography,Fourier transform infrared spectroscopy,and one-dimensional proton and carbon-13 nuclear magnetic resonance,and two-dimensional heteronuclear single quantum coherence spectroscopy.Neutral sugar analysis of the hemicellulosic fractions revealed that a higher ethanol concentration(45%~80%) favored the isolation of hemicelluloses with more side chains and lower glucose contents.The molecular weights of these polysaccharides ranged between 2842 g/mol and 5101 g/mol.The results of this study indicate that the hydrothermal ethanol process provides a new pretreatment strategy for the isolation and extraction of biomass.

Extraction of Hemicellulose from Acacia Wood via Autohydrolysis and Ethanol Precipitation

Isolation and utilization of hemicellulose are important processes in the pulp mill-based biorefinery. Considering the potential end use of the hemicellulose,this study investigated the concentration of monomeric and oligomeric sugars in the hydrolysate derived from autohydrolysis of acacia wood and the obtainment of these sugars via ethanol precipitation. The rate of generation of monomers and oligomers increased dramatically with an increase of the temperature from 160℃ to 180℃. The maximum content of oligomers and total sugars was achieved under conditions of 180℃ and 10 min,170℃ and 85 min,respectively. Interestingly,the maximum yield of hemicellulose via ethanol precipitation was achieved in a much shorter time,compared with the maximum yield of oligomer from the hydrolysate by autohydrolysis. A 6. 66 g / L quantity of hemicellulose was obtained by intensifying the conditions of ethanol precipitation. The hemicellulose characteristics were analyzed by Fourier transform infrared,nuclear magnetic resonance,and ultraviolet spectroscopy,and the molecular weight was determined by gel permeation chromatography and thermal analysis.

Characteristics of Carboxymethyl Hemicellulose(CMX)and Its Strengthening Mechanism

In this study,three kinds of rough-wrought hemicelluloses(RHCs)were obtained via alkali extraction on different raw materials.One was untreated Phyllostachys edulis powder;the second was obtained via benzyl alcohol extraction of Phyllostachys edulis powder;and the third was holocellulose of Phyllostachys edulis powder.Carboxymethyl hemicelluloses(CMXs)were prepared by the alkalization and etherification of RHCs and were used to enhance the tensile strength of household paper.The results demonstrated a synergistic effect between CMX and polyamide epichlorohydrin resin(PAE),and the addition of small amount of CMX(0.35 kg/t pulp)can significantly improve the dry and wet tensile indices of paper.Study results of CMX strengthening mechanism revealed that the addition of CMX can improve the retention of PAE,especially the fine fiber,due to the adsorption of charges.The use of CMX in paper not only saves production costs but also reduces the proportion of long fiber,which is beneficial to the closed circulation and treatment of white water.

Extraction,Purification,and Applications of Hemicellulose

In addition to cellulose and lignin,hemicellulose is an important biomass material.Recently,hemicellulose and its derivatives and materials have attracted increasing attention owing to their unique structures,improved properties,and promising application potential,and many reports on the extraction,isolation,and modification of hemicellulose are currently available.We summarized the recent developments of hemicellulose and its derivatives and materials by focusing on the extraction,purification,and modification of hemicellulose.The synthesis of hemicellulose-based derivatives and materials was also reviewed.Various methods of extracting,isolating,and modifying hemicellulose were discussed.Remaining challenges related to hemicellulose extraction,purification,and application were mentioned,and directions for further research on hemicellulose were proposed.

Hemicellulose-Based Hydrogels Present Status and Application Prospects: A Brief Review

Hemicellulose is one of the most abundant natural resources, which extensively exist in the pant tissues as the compositions of the cell wall filling between lignin and cellulose. In this review, the hemicellulose based hydrogels was illustrated in details including the hemicellulose derivatives (such as precursor of hemicellulose based hydrogel), hydrogels fabrication methods, origin of hemicellulose, composite hydrogels, and so on. In addition, the authors as well overviewed the new methods for fabrication of hemicellulose based hydrogels and special functional hemicellulose based hydrogels.

Xylo-Oligosaccharide Preparation through Enzyme Hydrolysis of Hemicelluloses Isolated from Press Lye

The emerging food additive, xylo-oligosaccharide(XOSs), was prepared through enzymatic hydrolysis of hemicelluloses isolated from press lye. Two of the three experimental enzyme preparations presented favourable effects, while the other one consisting of the nominal enzyme preparations with high enzyme activity was found to have poor catalytic effects. The conversion of xylan exceeded 40% and the selectivity for XOSs reached 90% when the temperature, hemicellulose concentration, dosage of enzymes, and hydrolysis time were 40?C, 100 g/L, 1 ku/g, and 4 h, respectively. Xylo-oligosaccharide preparation through enzymatic hydrolysis of hemicelluloses isolated from press lye was proved to be a feasible process to utilize the by-product of the lye regeneration, which will substantially improve the economy of the lye regeneration and recycling.

Xylo-oligosaccharides preparation through acid hydrolysis of hemicelluloses isolated from press-lye

The preparation of xylo-oligosaccharides(XOSs)through hydrolysis of hemicelluloses was studied.The hemicelluloses were isolated from the press lye discharged in the production of viscose,which contained about 30%xylan.Then,a factorial experimental design was applied to compare the influences of several factors including the concentrations of sulphuric acid and hemicelluloses,the duration and temperature of the hydrolysis,on the conversion of xylan,and the selectivity for the product–XOSs.The results showed that the hydrolysis duration affects the yield of XOSs to the greatest extent.It is difficult to obtain a high yield of XOSs with sulphuric acid as the hydrolysis catalyst.

Preparation and Characterization of Hydrophobic Bagasse Hemicellulosebased Films

To improve the hydrophobicity of bagasse hemicellulose-based films,glutaraldehyde was applied when preparing films of original and cationic bagasse hemicellulose with the addition of polyvinyl alcohol and sorbitol.The results showed that the cationic modification could increase the hydrophobicity of the hemicellulose-based film,and the hydrophobicity of hemicellulose-based films crosslinked with glutaraldehyde also increased.However,cationic modification of hemicellulose decreased the stress of the hemicellulose-based film.While crosslinking with glutaraldehyde increased the stress of both the original and cationic hemicellulose-based films.Macrophotography indicated that the film formability of the original hemicellulose was better than that of cationic hemicellulose.Through SEM observation,the degree of bonding of different components of the films was found to be increased due to crosslinking with glutaraldehyde.The crosslinking reaction between glutaraldehyde and hemicellulose was further confirmed by FT-IR spectroscopy.

Green and Effective Ammonium Carbonate-assisted Process for Drying Hemicellulose Obtained through Alkali Extraction of Bleached Bamboo Kraft Pulp

Hemicellulose has a wide range of applications,including that as an emulsifier for the food industry and raw material for the synthesis of bioethanol/biochemicals and biodegradable films.Hemicellulose is usually present as a spent liquor,such as the prehydrolysis liquor of the prehydrolysis kraft dissolving pulp production process and the alkali extraction liquor of the cold caustic extraction of pulp fibers.Due to its dilute nature,hemicellulose needs to be dried for practical utilization,and this is challenging.In this study,cellulose and hemicellulose in a bleached bamboo kraft pulp were separated using an alkali extraction process.Hemicellulose obtained from the extraction liquor was dried by an ammonium carbonate-assisted drying process.The effects of drying time and drying temperature were determined.Structure of the hemicellulose obtained by the ammonium carbonate-assisted drying process was similar to that of original hemicellulose,as revealed by detailed Fourier transform infrared and X-ray diffraction analyses.The novel drying method was more energy efficient and required a shorter drying time than the conventional freeze drying method,and the excellent solubility in alkaline solutions favored the chemical modification of hemicellulose.The dried hemicellulose can be used as a renewable raw material for the preparation of hydrogels and other substances such as bioethanol/biochemicals and biodegradable films.

Hemicellulose-Based Polymers Processing and Application

Hemicellulose is the second most abundant biomass in the world. Because of its unique chemical structure, hemicellulose has attracted more and more research and industry application under the background of fossil resource shortage and drawbacks. Hemicellulose is tended to be modified with esterification, etherification, cross-linkage and so on. These reactions change hemicellulose properties, so that it could be applied in many fields such as medical field, films, hydrogels, conductive polymers. Herein, we reviewed structure, isolation, reaction and applications of hemicellulose. Especially the useful pathways to change the hydrophilic character of hemicelluloses to hydrophobic are reviewed and several applications of these materials are discussed.

Binding Ability of Corn Cobs Hemicellulose toward Cadmium

Non-Starch Polysaccahride (NSP) is an agricultural byproduct containing of cellulose, hemicelluloses, and lignin. Hemicellulose has a hydroxyl functional group and carboxylic function on the monomer hemicellulose used as a binding ability for cadmium ion and hence as a pharmaceutical active ingredient to prevent cadmium toxicity. The purpose of this study is to isolate and evaluate hemicelluloses from corn cobs as a binding ability toward cadmium ion. The study is conducted by isolating the corn cobs in such way using 0.2 M NaOH, characterization of hemicellulose from corn cobs produced by Infra Red Spectrofotometry. Binding ability of corn cobs hemicellulose (CCH) was done in 3 ways. The first, it was by titrimetric with cadmium 3 mg/cm3 as a titrant and indicator of 0.05 N NaOH. The second, it was by in vitro test at pH 2 as a comparison to use pectin. The third, the in vivo test was conducted in 3 variations of treatment covering CCH 10 mg, 100 mcg of cadmium for 10 weeks. Assay of cadmium was conducted using atomic absorption spectrophotometry with flame at a wavelength of 228.8 nm. The research result showed that the highest yield of hemicellulose (12.04%) was obtained from delignication with 0.03 M NaOH in 60% ethanol and 3% H2O2, hemicellulose isolation with 500 cm3 of 0.2 M NaOH, and precipitation with 1:4 ratio of 10% acetic acid in 95% ethanol. Characteristics of CCH on infrared vibration methods provide vibrational hemicellulose in the region of 1820-1600 cm-1. It meant that the functional group carbonyl was present, and the vibration widened near 3400-2400 cm-1. It indicated that there was the functional group vibration region of hydroxyl. It also meant that there was carboxylic group and finger print at 1500-500 cm-1. Test results of the titrimetric holding ability showed that CCH was binding 100 mg of cadmium (46.17 ± 0.9256) mg or 46.17%. Binding ability test results at pH 2 showed that 300 mg of CCH yield was binding 30 mg cadmium of (26.68 ± 0.1490) mg or 88.93%. The results of in vivo tests showed that cadmium levels decreased by 95.05%. Based on the exposure, it can be concluded that the CCH isolation yields of 12.04% and can reduce cadmium levels in the blood. It means that the CCH can be used as a chelating agent of cadmium ions by in vitro and in vivo.

Microwave-Assisted Hydrolysis of Hemicellulose over Sulfonated Catalysts

Sulfonated catalysts based on zirconia (SO3H-ZrO2), silica (SO3H-SBA-15) and zeolite (SO3H-ZSM-5) were studied in the catalytic hydrolysis reaction of hemicellulose in a microwave reactor. The prepared catalysts were characterized by various techniques (XRD, N2 physisorption at 77 K, SEM, TEM and NH3-TPD). The obtained results reveal that despite the differences in their structural and textural properties, the ZrO2, Al-SBA-15 and H-ZSM-5 supports show similar conversions. Doping supports with sulfonate species created hydrogen bonds between SO3H groups and increased the amount of weak acid sites, which enhanced the hydrolysis of hemicellulose. SO3H- ZSM-5 showed the highest catalytic activity followed by SO3H-SBA-15 while SO3H-ZrO2 exhibited a poor conversion. Furthermore, the catalytic hydrolysis of the hemicellulose leads to several interesting products, such as formic acid, acetic acid, lactic acid and xylan. The correlation between the catalytic performances and the acidic properties of the different samples indicates that the best catalytic performances were obtained with the least acidic solids and especially when the density of strong acid sites decreases.

Wood By-Products as UV Protection:A Consequence Review

In recent decades,the ozone layer has suffered considerable damage,increasing the entry of ultraviolet(UV)light into the atmosphere and reaching the earth’s surface,negatively affecting life.Accordingly,researchers aimed to solve this problem by synthesizing advanced UV-shielding materials.On the other hand,developing an easy and green strategy to prepare functional materials with outstanding properties based on naturally abundant and environmentally friendly raw materials is highly desirable for sustainable development.Because biomass-derived materials are sustainable and biodegradable,they present a promising substitute for petroleum-based polymers.The three main structural constituents of the plant biomass-based materials that are naturally available are cellulose,hemicellulose,and lignin.This review details current developments using wood-based products such as cellulose,hemicellulose,and lignin in UV-shielding applications.It will start with assembling the structure and chemistry of cellulose,hemicellulose,and lignin,followed by their contributions to preparing UV-shielding materials.Finally,it will briefly discuss the different processing methods for the design of UV-shielding materials.The wood by-products offer additional opportunities to use the whole tree harvest.

Identification of Quantitative Trait Loci Affecting Hemicellulose Characteristics Based on Cell Wall Composition in a Wild and Cultivated Rice Species

Cell wall hemicellulosic polysaccharides are structurally complex and diverse. Knowledge about the synthesis of cell wall hemicelluloses and their biological roles is limited. Quantitative trait loci （QTL） mapping is a helpful tool for the dissection of complex phenotypes for gene identification. In this study, we exploited the natural variation in cell wall monosaccharide levels between a common wild rice, Yuanj, and an elite indica cultivar, Teqing, and performed QTL map- ping with their introgression lines （ILs）. Chemical analyses conducted on the culms of Yuanj and TeqJng showed that the major alterations are found in glucose and xylose levels, which are correlated with specific hemicellulosic polymers. Gly- cosidic linkage examination revealed that, in Yuanj, an increase in glucose content results from a higher level of mixed linkage I^-glucan （MLG）, whereas a reduction in xylose content reflects a low level of xylan backbone and a varied arabi- noxylan （AX） structure. Seventeen QTLs for monosaccharides have been identified through composition analysis of the culm residues of 95 core ILs. Four major QTLs affecting xylose and glucose levels are responsible for 19 and 21% of the phenotypic variance, respectively. This study provides a unique resource for the genetic dissection of rice cell wall forma- tion and remodeling in the vegetative organs.

The biosynthesis and wall-binding of hemicelluloses in cellulose-deficient maize cells:An example of metabolic plasticity

Cell-suspension cultures（Zea mays L.,Black Mexican sweet corn） habituated to 2,6-dichlorobenzonitrile（DCB） survive with reduced cellulose owing to hemicellulose network modification. We aimed to de fine the hemicellulose metabolism modifications in DCB-habituated maize cells showing a mild reduction in cellulose at different stages in the culture cycle. Using pulse-chase radiolabeling, we fed habituated and non-habituated cultures with [3H]arabinose,and traced the distribution of 3H-pentose residues between xylans, xyloglucans and other polymers in several cellular compartments for 5 h. Habituated cells were slower taking up exogenous [3H]arabinose. Tritium was incorporated into polysaccharide-bound arabinose and xylose residues, but habituated cells diverted a higher proportion of their new [3H]xylose residues into（hetero） xylans at the expense of xyloglucan synthesis. During logarithmic growth, habituated cells showed slower vesicular traf ficking of polymers,especially xylans. Moreover, habituated cells showed a decrease in the strong wall-binding of all pentose-containing polysaccharides studied; correspondingly, especially in log phase cultures, habituation increased the proportion of 3H-hemicelluloses（[3H]xylans and [3H]xyloglucan） sloughed into the medium. These findings could be related to the cel walls’ cellulose-deficiency, and consequent reduction in binding sites for hemicelluloses; the data could also re fl ect the habituated cells’ reduced capacity to integrate arabinox ylans by extra-protoplasmic phenolic cross-linking, as well as xyloglucans, during wall assembly.

Removal of Methylene Blue with Hemicellulose/Clay Hybrid Hydrogels

In this study, we chose corn stover hemicellulose for the preparation of hydrogels with admirable adsorption properties under mild alkaline conditions. Clay nanosheets were introduced to this system and hemicellulose/clay hybrid hydrogels were prepared. Morphological, mechanical properties and the methylene blue adsorption behaviors of the prepared hydrogels were studied. Results suggested that the addition of clay not only improved the mechanical strength of hemicellulose-based hydrogels, but also increased the adsorption capacity on methylene blue. Moreover, the adsorptions were confirmed to follow pseudo-second order equation for both gels with and without clay. The maximum adsorption capacities on methylene blue for hemicellulose-based hydrogels with or without clay reached 148.8 and 95.6 mg/g, respectively. These results implied that hemicellulose-based hydrogels could be used as promising adsorbents for the removal of methylene blue from waste water.