The paper illustrates the reason of the lack of talents with outstanding innovative practice ability and engineering leadership has become a great obstacle for many industries, represented by the software industry, to...The paper illustrates the reason of the lack of talents with outstanding innovative practice ability and engineering leadership has become a great obstacle for many industries, represented by the software industry, to develop along with the new era, and restricted the evolution of these industries toward the high end. With the target of training talents with innovation capacity and engineering leadership, the training plan for top talents based on the demand for high-end talents in the software engineering industry is put forward, and analyses are given on significant aspects including the development of the training resource system, the screening of students and the selection of enterprises, the teaching staff construction for university-enterprise cooperation, the establishment of a management system with joint effort for talents development, and the construction of process quality guarantee mechanism. In the end, for the implementation of the training plan, it is pointed out that the university-enterprise cooperative development mechanism should be perfected, the talents development practice should be enhanced, the personalized training of students should be emphasized, and the innovative ability in practice and the engineering leadership of students should be practically improved.展开更多
This paper presents a constitutive framework for finite element analysis of the truck beam end cutting process.For this purpose,a finite strain anisotropic elasto-plastic model,which takes nonlinear kinematic and isot...This paper presents a constitutive framework for finite element analysis of the truck beam end cutting process.For this purpose,a finite strain anisotropic elasto-plastic model,which takes nonlinear kinematic and isotropic hardening into account,is presented.Three factors are investigated to determine the effect on cutting quality:radius of cutting tools,strength of materials and relative clearance in cutting.The recommendations made herein are based on the simulation results.展开更多
Novel stable high-spin molecules possessing three different arranging fashions were designed with —^＊N—S— as a spin-containing （SC） fragment, an aromatic group, such as benzene （ 1 ）, pyridine （2）, pyridazi...Novel stable high-spin molecules possessing three different arranging fashions were designed with —^＊N—S— as a spin-containing （SC） fragment, an aromatic group, such as benzene （ 1 ）, pyridine （2）, pyridazine （3） , pyrimidine （4）, pyrazine （5） or triazine （6） as end groups （EG）, and phenyl as a ferromagnetic coupling （FC） unit. The effects of different EG on the spin multiplicities of the ground states and their stabilities were investigated by means of the AM1-CI approach. All the investigated molecules corresponded to the FC and possessed high-spin ground states. The spin on the two atoms of the SC fragment was not in agreement with the delocalization results in the specific stability of —^＊N—S—. In those molecules, the stabilities of the triplet states decreased when the distance between the atoms of central SC fragments （—N—） increased. The stabilities of the triplet states of compounds 1a-n, 1b-n and 1c-n, with heterocycles as EG were higher than those of the triplet states of those compounds with phenyl as EG. Furthermore, the stahilities of the triplet states of the compounds with pyrimidine and triazine as EG were higher than those with pyridine, pyridazine or pyrasine as EG.展开更多
Milling Process Simulation is one of the important re search areas in manufacturing science. For the purpose of improving the prec ision of simulation and extending its usability, numerical algorithm is more and more ...Milling Process Simulation is one of the important re search areas in manufacturing science. For the purpose of improving the prec ision of simulation and extending its usability, numerical algorithm is more and more used in the milling modeling areas. But simulative efficiency is decreasin g with increase of its complexity. As a result, application of the method is lim ited. Aimed at above question, high-efficient algorithm for milling process sim ulation is studied. It is important for milling process simulation’s applicatio n. Parallel computing is widely used to solve the large-scale computation question s. Its advantages include system flexibility, robust, high-efficient computing capability and high ratio of performance to price. With the development of compu ter network, utilizing the computing resource in the Internet, a virtual computi ng environment with powerful computing capability can be consisted by microc omputers, and the difficulty of building hardware environment which is used to s upport parallel computing is reduced. How to use network technology and parallel algorithm to improve simulative effic iency for milling forces simulation is investigated in the paper. In order to pr edict milling forces, a simplified local milling forces model is used in the pap er. End milling cutter is assumed to be divided by r number of differential elem ents along the axial direction of the cutter. For a given time, the total cuttin g forces can be obtained by summarizing the resultant cutting force produced by each differential cutter disc. Divide the whole simulative time into some segmen ts, send these program’s segments to microcomputers in the Internet and obtain the result of the program’s segments, all of the result of program’s segments a re composed the final result. For implementing the algorithm, a distributed Parallel computing framework is de signed in the paper. In the framework, web server plays a role of controller. Us ing Java RMI(remote method interface), the computing processes in computing serv er are called by web server. There are lots of control processes in web server a nd control the computing servers. The codes of simulative algorithm can be dynam ic sent to the computing servers, and milling forces at the different time are c omputed through utilizing the local computer’s resource. The results that are ca lculated by every computing servers are sent to the web server, and composed the final result. The framework can be used by different simulative algorithm. Comp ared with the algorithm running single machine, the efficiency of provided algor ithm is higher than that of single machine.展开更多
After the North China grid and the Central China grid get into connection with the UHVAC demonstration, a new phenomenon is discovered according to some simulations. That is, the faults at the remote end of the UHV in...After the North China grid and the Central China grid get into connection with the UHVAC demonstration, a new phenomenon is discovered according to some simulations. That is, the faults at the remote end of the UHV interconnected grid will result in significant power fluctuation and voltage drop on the UHV transmission line and even system splitting. But the faults near the UHV line only have marginal effects. Further, the simulation results also indicate that the short-circuit current of the buses near the UHV line is larger than that of the buses far away from the UHV line. This phenomenon is divergent from the traditional view. In this paper, the detail will be introduced, and the factors influencing the system stability after faults are presented and analyzed. The results indicate that transmission power of the UHV line and of the lines between the remote end and the major grid influence the fluctuation on UHV line. The load model and the grid structure of the remote end also have effect on it. Finally, corresponding control scheme is presented to improve the operation conditions of the UHV interconnected grid and ensure its security and stability.展开更多
基金sponsored by the 2016 Research Program on Educational Reform of Undergraduate Institutions in Shandong Province,namely "Research and Practice on the Mode of Training for Engineering Leading Talents Facing the Demand for High-end Talents in the Industry"(B2016M016),"Exploration and Practice of Promoting the Teaching Reform and Innovation Mode of Higher Education Based on Massive Open Online Course (MOOC)"(B2016Z018) and "Research and Application of Blended Teaching Mode Based on ‘ MOOC + SPOCs + Flipped Classroom’"(B2016Z020)supported by "Research on Multi-dimensional Education Quality Evaluation System Facing the Training of Postgraduate with Professional Degree (SDYZ1603)",which was the 2016 special project of undergraduate education innovation plan for Shandong Province,and "Research and Practice on the Mode of Training for Full Stack Talents for Internet of Things"(BK201602),which was the teaching and research project of Harbin Institute of Technology,Weihai
文摘The paper illustrates the reason of the lack of talents with outstanding innovative practice ability and engineering leadership has become a great obstacle for many industries, represented by the software industry, to develop along with the new era, and restricted the evolution of these industries toward the high end. With the target of training talents with innovation capacity and engineering leadership, the training plan for top talents based on the demand for high-end talents in the software engineering industry is put forward, and analyses are given on significant aspects including the development of the training resource system, the screening of students and the selection of enterprises, the teaching staff construction for university-enterprise cooperation, the establishment of a management system with joint effort for talents development, and the construction of process quality guarantee mechanism. In the end, for the implementation of the training plan, it is pointed out that the university-enterprise cooperative development mechanism should be perfected, the talents development practice should be enhanced, the personalized training of students should be emphasized, and the innovative ability in practice and the engineering leadership of students should be practically improved.
文摘This paper presents a constitutive framework for finite element analysis of the truck beam end cutting process.For this purpose,a finite strain anisotropic elasto-plastic model,which takes nonlinear kinematic and isotropic hardening into account,is presented.Three factors are investigated to determine the effect on cutting quality:radius of cutting tools,strength of materials and relative clearance in cutting.The recommendations made herein are based on the simulation results.
基金Supported by the National Natural Science Foundation of Chana(Nos. 29804002, 20274006) and Tianjin Polytechnic Univer-sity Item(Nos. 029307, 029302).
文摘Novel stable high-spin molecules possessing three different arranging fashions were designed with —^＊N—S— as a spin-containing （SC） fragment, an aromatic group, such as benzene （ 1 ）, pyridine （2）, pyridazine （3） , pyrimidine （4）, pyrazine （5） or triazine （6） as end groups （EG）, and phenyl as a ferromagnetic coupling （FC） unit. The effects of different EG on the spin multiplicities of the ground states and their stabilities were investigated by means of the AM1-CI approach. All the investigated molecules corresponded to the FC and possessed high-spin ground states. The spin on the two atoms of the SC fragment was not in agreement with the delocalization results in the specific stability of —^＊N—S—. In those molecules, the stabilities of the triplet states decreased when the distance between the atoms of central SC fragments （—N—） increased. The stabilities of the triplet states of compounds 1a-n, 1b-n and 1c-n, with heterocycles as EG were higher than those of the triplet states of those compounds with phenyl as EG. Furthermore, the stahilities of the triplet states of the compounds with pyrimidine and triazine as EG were higher than those with pyridine, pyridazine or pyrasine as EG.
文摘Milling Process Simulation is one of the important re search areas in manufacturing science. For the purpose of improving the prec ision of simulation and extending its usability, numerical algorithm is more and more used in the milling modeling areas. But simulative efficiency is decreasin g with increase of its complexity. As a result, application of the method is lim ited. Aimed at above question, high-efficient algorithm for milling process sim ulation is studied. It is important for milling process simulation’s applicatio n. Parallel computing is widely used to solve the large-scale computation question s. Its advantages include system flexibility, robust, high-efficient computing capability and high ratio of performance to price. With the development of compu ter network, utilizing the computing resource in the Internet, a virtual computi ng environment with powerful computing capability can be consisted by microc omputers, and the difficulty of building hardware environment which is used to s upport parallel computing is reduced. How to use network technology and parallel algorithm to improve simulative effic iency for milling forces simulation is investigated in the paper. In order to pr edict milling forces, a simplified local milling forces model is used in the pap er. End milling cutter is assumed to be divided by r number of differential elem ents along the axial direction of the cutter. For a given time, the total cuttin g forces can be obtained by summarizing the resultant cutting force produced by each differential cutter disc. Divide the whole simulative time into some segmen ts, send these program’s segments to microcomputers in the Internet and obtain the result of the program’s segments, all of the result of program’s segments a re composed the final result. For implementing the algorithm, a distributed Parallel computing framework is de signed in the paper. In the framework, web server plays a role of controller. Us ing Java RMI(remote method interface), the computing processes in computing serv er are called by web server. There are lots of control processes in web server a nd control the computing servers. The codes of simulative algorithm can be dynam ic sent to the computing servers, and milling forces at the different time are c omputed through utilizing the local computer’s resource. The results that are ca lculated by every computing servers are sent to the web server, and composed the final result. The framework can be used by different simulative algorithm. Comp ared with the algorithm running single machine, the efficiency of provided algor ithm is higher than that of single machine.
文摘After the North China grid and the Central China grid get into connection with the UHVAC demonstration, a new phenomenon is discovered according to some simulations. That is, the faults at the remote end of the UHV interconnected grid will result in significant power fluctuation and voltage drop on the UHV transmission line and even system splitting. But the faults near the UHV line only have marginal effects. Further, the simulation results also indicate that the short-circuit current of the buses near the UHV line is larger than that of the buses far away from the UHV line. This phenomenon is divergent from the traditional view. In this paper, the detail will be introduced, and the factors influencing the system stability after faults are presented and analyzed. The results indicate that transmission power of the UHV line and of the lines between the remote end and the major grid influence the fluctuation on UHV line. The load model and the grid structure of the remote end also have effect on it. Finally, corresponding control scheme is presented to improve the operation conditions of the UHV interconnected grid and ensure its security and stability.
