Poly-L-lactide(PLLA) was synthesized by ring-opening polymerization from high purity L-lactide with tin octoate as initiator, and characterized by means of infrared, and 1H-nuclear magnetic resonance. The influences o...Poly-L-lactide(PLLA) was synthesized by ring-opening polymerization from high purity L-lactide with tin octoate as initiator, and characterized by means of infrared, and 1H-nuclear magnetic resonance. The influences of initiator concentration, polymerization temperature and polymerization time on the viscosity average molecular mass of PLLA were investigated. The effects of different purification methods on the concentration of initiator and viscosity average molecular mass were also studied. PLLA with a viscosity average molecular mass of about 50.5×104 was obtained when polymerization was conducted for 24 h at 140 ℃ with the molar ratio of monomer to purification initator being 12 000. After purification, the concentration of tin octoate decreases; however, the effect of different purification methods on the viscosity average molecular mass of PLLA is different, and the obtained PLLA is a typical amorphous polymeric material. The crystallinity of PLLA decreases with the increase of viscosity average molecular mass.展开更多
Lithium amides have been proved to be effective anionic initiators for the anionic polymerization of acrylonitrile to get high molecular weight polyacrylonitrile in this study. Polyacrylonitrile with weightaverage mol...Lithium amides have been proved to be effective anionic initiators for the anionic polymerization of acrylonitrile to get high molecular weight polyacrylonitrile in this study. Polyacrylonitrile with weightaverage molecular weight ranging from 1.02 × 10~6 g/mol to 1.23 ×10~6 g/mol (M_w/M_n= 1.9-2.2) could be prepared utilizing lithium amides derived from diisopropylamine, diethylamine, hexamethyldisilazane,dicyclohexylamine, and 2,2,6,6-tetramethylpiperidine as initiators. The polymerization of acrylonitrile proceeded in a homogeneous manner in N,N-di methyl for mamide and insignificant contribution of side reactions was confirmed.展开更多
Styrene emulsion polymerization using an alkyl-9-BBN, synthesized by reacting 9-BBN(9-borabicyclo-[3.3.1]-nonane) and styrene, in an aqueous sodium dodecyl sulfate(SDS) solution was studied. Ultra-high-molecular-w...Styrene emulsion polymerization using an alkyl-9-BBN, synthesized by reacting 9-BBN(9-borabicyclo-[3.3.1]-nonane) and styrene, in an aqueous sodium dodecyl sulfate(SDS) solution was studied. Ultra-high-molecular-weight(〉 1.0 × 10~7) polystyrene was synthesized using a radical initiator formed through the aerobic oxidation of this alkyl-9-BBN in a high yield(〉 80%). The kinetics of this emulsion polymerization of styrene with the alkyl-9-BBN was investigated. We confirmed that in the initial stage of the polymerization, the initial reaction rate followed first-order kinetics. The activation energy for this emulsion polymerization of styrene was approximately 56.2 kJ/mol.展开更多
基金Project (50174059) supported by the National Natural Science Foundation of China
文摘Poly-L-lactide(PLLA) was synthesized by ring-opening polymerization from high purity L-lactide with tin octoate as initiator, and characterized by means of infrared, and 1H-nuclear magnetic resonance. The influences of initiator concentration, polymerization temperature and polymerization time on the viscosity average molecular mass of PLLA were investigated. The effects of different purification methods on the concentration of initiator and viscosity average molecular mass were also studied. PLLA with a viscosity average molecular mass of about 50.5×104 was obtained when polymerization was conducted for 24 h at 140 ℃ with the molar ratio of monomer to purification initator being 12 000. After purification, the concentration of tin octoate decreases; however, the effect of different purification methods on the viscosity average molecular mass of PLLA is different, and the obtained PLLA is a typical amorphous polymeric material. The crystallinity of PLLA decreases with the increase of viscosity average molecular mass.
文摘Lithium amides have been proved to be effective anionic initiators for the anionic polymerization of acrylonitrile to get high molecular weight polyacrylonitrile in this study. Polyacrylonitrile with weightaverage molecular weight ranging from 1.02 × 10~6 g/mol to 1.23 ×10~6 g/mol (M_w/M_n= 1.9-2.2) could be prepared utilizing lithium amides derived from diisopropylamine, diethylamine, hexamethyldisilazane,dicyclohexylamine, and 2,2,6,6-tetramethylpiperidine as initiators. The polymerization of acrylonitrile proceeded in a homogeneous manner in N,N-di methyl for mamide and insignificant contribution of side reactions was confirmed.
文摘Styrene emulsion polymerization using an alkyl-9-BBN, synthesized by reacting 9-BBN(9-borabicyclo-[3.3.1]-nonane) and styrene, in an aqueous sodium dodecyl sulfate(SDS) solution was studied. Ultra-high-molecular-weight(〉 1.0 × 10~7) polystyrene was synthesized using a radical initiator formed through the aerobic oxidation of this alkyl-9-BBN in a high yield(〉 80%). The kinetics of this emulsion polymerization of styrene with the alkyl-9-BBN was investigated. We confirmed that in the initial stage of the polymerization, the initial reaction rate followed first-order kinetics. The activation energy for this emulsion polymerization of styrene was approximately 56.2 kJ/mol.