Development of peanut varieties with high oil content by in vitro mutagenesis and screening

Peanut (Arachis hypogaea L.) is an important oil crop globally and high oil content is one of the major targets in peanut breeding programs. Previous studies indicated that the osmotic pressure (OP) of the leaves of peanut plants subjected to drought stress was negatively correlated with kernel oil content. Based on this knowledge, we established a practical and reliable method for creating new peanut varieties with high oil content using in vitro mutagenesis and directional OP-based selection. Using embryonic leaflets of peanut variety Huayu 20 as explants, pingyangmycin (PYM) as the mutagen, and hydroxyproline (HYP) as the OP regulator, we developed 15 HYP-tolerant regenerated plants. For each regenerated plant, we selected offspring with oil content>55% (relative to 49.5% for Huayu 20). We developed and released three new peanut varieties with high yield and high oil content from the offspring of the HYP-tolerant regenerated plants. The three new varieties were named as Yuhua 4, Yuhua 9 and Yuhua 14 and their oil contents were 57.7, 61.1 and 59.3%, respectively. The results indicate that in vitro mutagenesis with PYM followed by directed screening with HYP is a useful approach for breeding peanut varieties with high oil contents.

Comparison of Phosphorous Absorption, Quality and Yield Between High Oil Corn and Common Corn as Influenced by Phosphorous Application

A field trial was carried out to investigate phosphorous (P) absorption, grain quality and yield between high oil corn and common corn. The results indicated that high oil corn var.Tongyou 1 obtained lower highest P absorption rate (HAR) and later occurring date of HAR, in comparison with common corn var. Simi 25. The highest HAR and the earliest occurring date of HAR was obtained by the treatments of P45 and P75 in Tongyou 1 and Simi 25 separately; while the total amount of P accumulated by maize plant was achieved by P105 treatment in both varieties. P in grain relied mainly on root uptake at maturation that accounted for 85.7-96.8% and 79.3-84.3% for Tongyou 1 and Simi 25, respectively. Tongyou 1 contained more oil and protein contents, but less starch content with lower grain yield. P application at appropriate rate enhanced contents of protein and fatty acid, but the increment of starch content was neglectable. Acknowledgements This study was financed by the National Key Tech- nologies R & D Program (2004BA520A13), P.R.China.

Breeding of Zhongyouza 8, a Canola Variety with Large Seeds and High Oil Yield

High oil yield resulted from a combination of high grain yield and high oil content is a prerequisite for the high efficient oilseed rape production. By using irradiation induced mutation and sexual hybridization combined with paired test cross, the fertility, yield and oil content of the three lines of cytoplasmic male sterility have been improved and a new hybrid variety Zhongyouza 8 with high oil yield was developed. It has been testified that the yield of Zhongyouza 8 was significantly higher than that of the control variety Zhongyou 821 with 9.82 and 10.64% increase in the regional trials of Hubei Province and nationwide, respectively. The oil content and oil yield of Zhongyouza 8 were the highest among all the lines involved in Hubei provincial trials, being 42.77% and 1 051.05 kg ha^-1 which was raised by 3% and 161.25 kg ha^-1 compared to the control Zhongyou 821, respectively. The genetic basis for the strong heterosis, and the factors contributing to the yield and oil content increase of Zhongyouza 8 as well as the strategy for high oil yielding variety improvement through increasing seed size were also discussed in this paper.

Biogas Production from Anaerobic Digestion of High Oil Waste

The possibility of anaerobic digestion of high oil waste at high temperatures was explored,and the effects of fat concentration on biogas production via anaerobic digestion were analyzed by batch and continuous experiments successively. Besides,the response and recovery of the digestion system to the shock of high concentrations of oil were studied. The results showed that the anaerobic digestion of high oil waste could be carried out,and fat concentration had a significant effect on the anaerobic digestion. In the batch experiments,the process of anaerobic digestion could carry out only when fat concentration was 0-1. 68%,and the average methane content was 46. 42%; with the increase of fat concentration,both methane content and production rate decreased significantly,and the digestion period was extended obviously. When fat concentration exceeded 2. 52%,the anaerobic digestion failed to start,and methane could not be detected in the produced biogas. In the continuous experiments,the system could withstand a certain concentration of fat( 6 g/L),and anaerobic digestion process would be inhibited when it experienced the impact of a high oil load( 26. 7 g/L). Nevertheless,this process could recover quickly after the removal of the impact,and the system could withstand a higher fat concentration( 13 g/L) than before. Furthermore,the volume production rate of biogas was approximately 1 L/( L·d),and methane content was about 55%.

Origin and accumulation of high-maturity oil and gas in deep parts of the Baxian Depression, Bohai Bay Basin, China

Great quantities of light oil and gas are produced from deep buried hill reservoirs at depths of 5,641 m to 6,027 m and 190 ℃ to 201 ℃ in the Niudong-1 Well, representing the deepest and hottest commercial hydrocarbons discovered in the Bohai Bay Basin in eastern China. This discovery suggests favorable exploration prospects for the deep parts of the basin. However, the discovery raises questions regarding the genesis and accumulation of hydrocarbons in deep reservoirs. Based on the geochemical features of the hydrocarbons and characteristics of the source rocks as well as thermal simulation experiments of hydrocarbon generation, we conclude that the oil and gas were generated from the highly mature Sha-4 Member （Es4） source rocks instead of thermal cracking of crude oils in earlier accumulations. The source kitchen with abnormal pressures and karsted carbonate reservoirs control the formation of high-maturity hydrocarbon accumulations in the buried hills （i.e., Niudong-1） in conjunction with several structural-lithologic traps in the ES4 reservoirs since the deposition of the upper Minghuazhen Formation. This means the oil and gas exploration potential in the deep parts of the Baxian Depression is probably high.

A New Method for Predicting Wall Sticking Occurrence Temperature of High Water Cut Crude Oil

In crude oil transportation, adhesion of oil on pipe wall can cause partial or total blockage of the pipe. This process is significantly affected by wall sticking occurrence temperature(WSOT). In this work, an efficient approach for estimating WSOT of high water-cut oil, which can agree well with the actual environment of multiphase transportation pipeline, is proposed. Based on the energy dissipation theory, it is possible to make comparison of average shear rates between the stirred vessel and the flow loop. The impacts of water content and shear rate on WSOT are investigated using the stirred vessel and the flow loop. Good agreement has been observed between the stirred vessel and the flow loop results with the maximum and the average absolute deviations equating to 3.30 °C and 2.18 °C, respectively. The development of gathering scheme can enjoy some benefits from this method.

High-Lard and High-Fish Oil Diets Differ in Their Effects on Insulin Resistance Development, Mitochondrial Morphology and Dynamic Behaviour in Rat Skeletal Muscle

Fish oil (mainly omega 3 polyunsaturated fatty acids), differently from lard (mainly saturated fatty acids) has been suggested to have anti-inflammatory effects associated with amelioration of insulin sensibility. An important role in skeletal muscle insulin resistance development has been recently attributed to mitochondrial dynamic behavior. Mitochondria are dynamic organelles that frequently undergo fission/fusion processes and a shift toward fission process has been associated with skeletal muscle mitochondrial dysfunction and insulin resistance development. The present work aimed to evaluate if the replacement of lard with fish oil in high-fat diet positively affect skeletal muscle mitochondrial dynamic behavior in association with the improvement of insulin-resistance. Body weight gain, systemic insulin-resistance (glucose/insulin ratio), serum TNFα levels and skeletal muscle lipid content were assessed in rats fed a high-lard or high-fish-oil diet for 6 weeks. In skeletal muscle sections, immunohistochemical analysis were performed to detect the presence of insulin receptor substrate 1 (IRS1) and tyrosine phosphorylated IRS1 (key factor in insulin signalling pathway) as well as to detect the main proteins involved in mitochondrial fusion (MFN2 and OPA1) and fission (DRP1 and Fis1) processes. Skeletal muscle mitochondrial ultrastructural features were assessed by electron microscopy. High-fish oil feeding induced lower body weight gain, systemic inflammation and insulin-resistance development as well as skeletal muscle lipid accumulation compared to high-lard feeding. Skeletal muscle sections from high-fish oil fed rats exhibited a greater number of immunoreactive fibers for MFN2 and OPA1 proteins as well as weaker immunostaining for DRP1 and Fis1 compared to sections from high-lard fed rats. Electron microscopy observations suggested a prominent presence of fission events in L rats and fusion events in F rats. The positive effect of the replacement of lard with fish oil in high-fat diet on systemic and skeletal muscle insulin sensibility was associated to changes in mitochondrial dynamic behavior.

Geochemical Characterization and Origin of High-Sulfur,Heavy Oils in Jiyang Sub-Basin,East China

High-sulfur,heavy petroleum is widely occurring in the Tertiary lacustrine Jiyang sub-basin, Bohai Bay Basin.They are differentiated into two families based on the bulk properties and biomarker compositions.Family 1 is characterized by high resins（40%-71%）and sulfur（2%-4%）,and low wax （l%-6%）,with n-alkanes removed by biodegradation,whereas family 2 is characterized by extremely abundant sulfur（3%-10%）,and high asphaltenes（7%-31%）and wax（2%-19%）,with no evidence of microbial attack.The oils of family 1 are distributed in the reservoir,lower than 1500 m throughout the sub-basin.Biomarker assemblages,such as low pristane/phytane ratios（1 Pr/Ph）and a high abundance of carotane,gammacerane,and dinosterane,suggest that they are derived from the calcareous mudstones and shales among the stratified,saline Es_4~u unit,in addition to the in situ biodegradation-concentrated sulfur content.However,the oils of family 2 are identified only in the western Zhanhua and eastern Chezhen depressions,with a depth deeper than 1700 m.Physical properties,together with biomarker ratios,including even-numbered n-alkanes,1 Pr/Ph,trace diasteranes,higher C35 homohopanes,and abundant dibenzothiophene series,with1 dibenzothiophene/phenanthrene,indicate an origin from carbonate source rocks.The X-ray diffraction analysis showed that the carbonate source rock is limited in the Es_4~u unit of the Bonan sag,which is different from most other source rocks in the same horizon.It is suggested that the high-sulfur,heavy oils are generated at the early stage of the oil window.Bacterial sulfate reduction might be responsible for the occurrence of sulfur species in the high-sulfur,heavy oils,while heavy biodegradation will enhance sulfur concentrations.

Flow Characteristics of Crude Oil with High Water Fraction during Non-heating Gathering and Transportation

In order to ensure the safety of the non-heating gathering and transportation processes for high water fraction crude oil,the effect of temperature,water fraction,and flow rate on the flow characteristics of crude oil with high water fraction was studied in a flow experimental system of the X Oilfield.Four distinct flow patterns were identified by the photographic and local sampling techniques.Especially,three new flow patterns were found to occur below the pour point of crude oil,including EW/O&W stratified flow with gel deposition,EW/O&W intermittent flow with gel deposition,and water single-phase flow with gel deposition.Moreover,two characteristic temperatures,at which the change rate of pressure drop had changed obviously,were found during the change of pressure drop.The characteristic temperature of the first congestion of gel deposition in the pipeline was determined to be the safe temperature for the non-heating gathering and transportation of high water cut crude oil,while the pressure drop reached the peak at this temperature.An empirical formula for the safe temperature was established for oil-water flow with high water fraction/low fluid production rate.The results can serve as a guide for the safe operation of the non-heating gathering and transportation of crude oil in high water fraction oilfields.

Review and Comprehensive Analysis of Composition and Origin of High Acidity Crude Oils

High acidity crude oils have an advantage over normal oils in terms of their price,but can cause corrosion and refinery problems.They are the so-called opportunity crudes and likely to be important reserved resources in the 21st century.Researches on high acidity crude oils are becoming more and more profound.Based on the existing research achievements,this article has given an overview of the chemical composition and acid distribution of high acidity oils,and also analyzed their origin types and potential influence factors.

Preparation and Application of Polymer Silicate Phosphate Ferric Sulfate Used in High-Viscosity Oil Refining Wastewater Treatment

A new kind of flocculants, named Polymer Silicate Phosphate Ferric Sulfate(PSPFS), was synthesized by ferrous sulfate used as the main material and activated silicic acid as additive. In this paper, High-Viscosity Oil Refining wastewater from Liaohe Petrochemical Corporation was the treatment object. Overall, the in-fluencing factors and synthesis technology conditions of PSPFS were determined by experiments. First of all, the conditions of influencing factors were showed as follows: the mass percent concentration of ferrous sulfate 55%,concentration of sodium silicate 15% , the molar ratio of ferrous sulfate and hydrogen peroxide 1.2:1, oxidation temperature 40 degree Celsius, oxidation time 4 hours, polymerization temperature 60 de-gree Celsius and polymerization time 2 hours. Secondly, the optimal ratios of components were determined by uniform design method. The molar ratio of Fe/Si is 5.0:1, Fe/H2SO4 is 3.2:1, and Fe/P is 18.0:1. At last, the optimal experimental condition was determined as follows: the dosing quantity 200mg/L, pH value 5.5~9, temperature 25~45℃, stirring time 2 min, and standing time 3 min, according to the result of floc-culation experiments with PSPFS. Besides, the result of the comparative experiments showed that the effi-ciency of PSPFS was much better than the reference flocculants.

Frying Performance of High Oleic Oil Enriched in Biophenols during Discontinuos and Prolonged Thermal Treatment

Biophenols are potent natural antioxidants that protect food quality by preventing oxidative deterioration of lipids. During heat treatment this protective rule prevents oxidation caused by many factors, as high temperature reached, presence of oxygen and water contained in food matrix. The aim of this study was to evaluate the frying performance of high oleic oil enriched in biophenols, comparing its thermal stability with those of high oleic oil (control sample) during thermo-oxidation and deep fat frying process. Positive effects when biophenols were added to oil were found: lower acidity levels, lower TPC values during the first 16 hours of heat treatment, absence of short chain fatty acids (C8:0) until 24 h of thermo-oxidation treatment and detection of lower acrylamide content in French friesrespect to those fried in the control oil.

Factors Influencing Droplet Size of Silicone Oil Emulsion with High Solid Content

A silicone oil emulsion with 60% of solid content was prepared with methyl silicone oil used as the main material by means of the emulsifier-in-oil method.The influence of emulsification conditions on the droplet diameter of silicone oil emulsion was discussed.The experimental results showed that the emulsification method,including the quantity of the emulsifier,the time and temperature of emulsification,the emulsifying water dosage,and the stirring speed,had significant impact on the droplet size.The optimal conditions were identified to achieve a smallest droplet diameter of the emulsion at an emulsifier dosage of 6%,an emulsification temperature of 70 ℃,an emulsification time of 30 min,and a stirring speed of 1100 r/min,with water added in two portions at a ratio of 1:1.The high-solid content silicone oil emulsion with a mean droplet diameter of 2.731 μm was prepared under these conditions that could ensure absence of stratification and floating oil under centrifuging at a speed of 3000 r/min for 30 min.

Hypolipidemic Activity of Olive Oil (Olea europaea) against High Fat Diet-Induced Nonalcoholic Fatty Liver Disease (NAFLD) in Mice

Aim: The aim of the present study is to access the effect of olive oil supplementation against high fat diet induced fatty liver disease in mice. Methods: Mice were divided into five groups: Group I (normal diet), Group II (high fat diet), Group III (olive oil), Group IV and V (High Fat Diet along with olive oil). All mice were fed for 16 weeks with weight measurements every 2 weeks and then sacrificed. Biochemical analysis of blood samples was done and mice livers were histologically examined. Results: Group II mice showed significant increase in body weight as compared with Group I (p < 0.05). Group IV and V mice were significantly (p < 0.05) reduced in body weight as compared with Group II. Olive oil groups had significantly decreased triglyceride and low density lipoprotein levels as compared with Group II whereas high density lipoprotein levels were significantly increased (p < 0.05). The liver enzymes were significantly increased in Group II as compared with other groups (p < 0.05). Liver histopathology revealed drastically increased lipid droplets in Group II mice as compared with Group IV & V. Conclusion: Olive oil causes weight reduction, decreases the serum triglycerides, normalizes the liver enzymes and significantly reduces the accumulation of fat in liver. Therefore, olive oil may represent a potential therapeutic alternative for NAFLD and other fatty diseases.

Advance in germplasm innovation and gene mining of high-oil maize

As one of the 3 worldwide major grain crops, maize is the main source of food, feed and edible vegetable oil. High-oil maize has been selectively bred for many years due to its high oil content and nutritional quality. However, compared with normal maize, the progress of high-oil maize breeding is hindered nowadays. Main problems are scarce of high-oil maize germplasm, conventional breeding methods, and slow genetic research progress on oil content and fatty acid composition. In this study, germplasm innovation and gene mining of high-oil maize were reviewed to provide theoretical reference for genetic breeding and utilization. Several high-oil basic populations have been developed after more than 100 years of selection, which have served as the unique resources for high-oil maize breeding. They have also been used to dissect genetic architecture of oil biosynthesis in maize kernel. Using linkage and association analyses, many QTLs and loci associated with oil content and fatty acid composition have been identified and mapped. In addition, some candidate genes for QTLs have been validated to regulate maize grain oil content and fatty acid composition. Prospect for high-oil maize was also discussed to provide knowledge about genetic mechanism of oil biosynthesis and improvement of kernel quality in maize.

High performance electrocoagulation process in treating palm oil mill effluent using high current intensity application

Electrocoagulation process using high current intensity to treat palm oil mill effluent(POME) was investigated in this study.Various operating parameters such as electrolysis time, inter-electrode distance and initial pH were carried out to determine the efficient process condition on the removal of chemical oxygen demand(COD),biological oxygen demand(BOD) and suspended solids(SS).The highest treatment was achieved at 50 min with the removal efficiencies for COD, BOD and SS obtained as 85%, 83%, and 84%, respectively.More than 50 min treatment showed the fluctuated trends of removal efficiencies which can be considered insignificant.The application of higher current resulted in higher removals of organics while the gas bubbles also assisted in removing the pollutant particles by floatation.In an inter-electrode distance study, the removal efficiency decreased when inter-electrode distance was either higher or lower than 10 mm due to the increase of solution resistance and the decrease of anode active surface area.In initial pH study, it was found that high removal efficiencies were achieved in slightly acidic POME sample rather than in neutral or basic condition.An electrocoagulation process by using the optimum operating parameters was able to remove COD, BOD and SS up to 95%, 94% and 96% respectively.The experimental results confirm that application of high current intensity in electrocoagulation provided high treatment efficiency at a reduced reaction time.

Novel efficient procedure for biodiesel synthesis from waste oils with high acid value using 1-sulfobutyl-3-methylimidazolium hydrosulfate ionic liquid as the catalyst

Preparation of biodiesel from waste oils containing 72% of free fatty acids catalyzed by a novel Br?nsted acidic ionic liquid 1-sulfobutyl-3-methylimidazolium hydrosulfate([BHSO_3MIM][HSO_4]) was systematically investigated.The optimum molar ratio of methanol to waste oils,catalyst amount,reaction temperature and reaction time were 8/1,10%(based on the mass of waste oils),140°C and 6 h,respectively,under which the obtained yield of biodiesel reached 94.9%.Also,[BHSO_3MIM][HSO_4] as a catalyst still retained around 97% of its original catalytic activity after successive re-use of 5 batches(6 h per batch),showing the excellent operational stability.Moreover,the acidic IL [BHSO_3MIM][HSO_4] was able to ef ficiently catalyze conversions of waste oils with different amounts of FFAs(free fatty acids) into biodiesel,and showed tremendous application potential.Therefore,an ef ficient and environmentally friendly catalyst is provided for the synthesis of biodiesel from waste oils with high acid value.

Performance and Modeling of an Up-flow Anaerobic Sludge Blanket(UASB) Reactor for Treating High Salinity Wastewater from Heavy Oil Production

In this study,an up-flow anaerobic sludge blanket(UASB) reactor was applied to treat the high salinity wastewater from heavy oil production process.At a HRT of ≥24 h,the COD removal reached as high as 65.08% at an influent COD ranging from 350mg/L to 640mg/L.An average of 74.33% oil reduction was also achieved in the UASB reactor at an initial oil concentration between 112mg/L and 205mg/L.These results indicated that this heavy oil production related wastewater could be degraded efficiently in the UASB reactor.Granular sludge was formed in this reactor.In addition,two models,built on the back propagation neural network(BPNN) theory and linear regression techniques were developed for the simulation of the UASB system performance in the oily wastewater biodegradation.The average error of COD and oil removal was-0.65% and 0.84%,respectively.The results indicated that the models built on the BPNN theory were wellfitted to the detected data,and were able to simulate and predict the removal of COD and oil by the UASB reactor.

Diffusion coefficients of natural gas in foamy oil systems under high pressures

The diffusion coefficient of natural gas in foamy oil is one of the key parameters to evaluate the feasibility of gas injection for enhanced oil recovery in foamy oil reservoirs. In this paper, a PVT cell was used to measure diffusion coefficients of natural gas in Venezuela foamy oil at high pressures, and a new method for deter- mining the diffusion coefficient in the foamy oil was de- veloped on the basis of experimental data. The effects of pressure and the types of the liquid phase on the diffusion coefficient of the natural gas were discussed. The results indicate that the diffusion coefficients of natural gas in foamy oil, saturated oil, and dead oil increase linearly with increasing pressure. The diffusion coefficient of natural gas in the foamy oil at 20 MPa was 2.93 times larger than that at 8.65 MPa. The diffusion coefficient of the natural gas in dead oil was 3.02 and 4.02 times than that of the natural gas in saturated oil and foamy oil when the pressure was 20 MPa. However, the gas content of foamy oil was 16.9 times higher than that of dead oil when the dissolution time and pressure were 20 MPa and 35.22 h, respectively.