Highly Efficient Greenish-Yellow Phosphorescent Organic Light-Emitting Diodes Based on a Novel 2,3-Diphenylimidazo[1,2-a]Pyridine Iridium(Ⅲ) Complex

A cyclometalated greenish-yellow emitter 2,3-diphenylimidazo[1,2-a]pyridine iridium（Ill） complex is successfully synthesized and used to fabricate phosphorescent organic light-emitting diodes. The optimized device exhibits a greenish-yellow emission with the peak at 523nm and a strong shoulder at 557nm, corresponding to Commission Internationale de l＇Eclairage coordinates of （0.38, 0.68）. The full width at half maximum of the device is 93 nm, which is broader than the fac-tris（2-phenylpyridine）iridium [Ir（ppy）3] based reference device of 78 nm. Meanwhile, a maximum current efficiency of 62.6 cd/A （47.51m/W） is obtained. This result is higher than a maximum current efficiency of 54.8 cd/A （431m/W） of the Ir（ppy）a based device. The results indicate that this new iridium complex may have potential applications in fabricating high color rendering index white organic light emitting diodes.

High Responsivity Organic Ultraviolet Photodetector Based on NPB Donor and C60 Acceptor

We report fabrication and characterization of organic heterojunction UV detectors based on N,N＇-bis（naphthalen- 1-y1）-N,N＇-bis （phenyl） benzidine （NPB） and fullerene C60. The effects of different thicknesses of NPB and C60 layers are studied and compared. Notably, the optimal thicknesses of electron acceptor C60 and electron donor NPB are 40 nm and 80 nm, respectively. The J V characteristic curves of the device demonstrate a three-order- of-magnitude difference when illuminated under a 350nm UV light and in the dark at -0.5 V. The device exhibits high sensitivity in the region of 320-380nm with the peak located around 35Onm. Especially, it shows excellent photo-response characteristic with a responsivity as high as 315 mA/W under the illumination of 192μW.cm 2 350nm UV light at -5 V. These results indicate that the NPB/C60 heterojunction structure device might be used as low-cost low-voltage UV photodetectors.

High Efficiency and Stable Organic Light-Emitting Diodes Based on Thermally Activated Delayed Fluorescence Emitter

High efficiency, stable organic light-emitting diodes （OLEDs） based on 2-pheyl-4＇-carbazole-9-H-Thioxanthen-9- one-10, 10-dioxide （TXO-PhCz） with different doping concentration are constructed. The stability of the encap- sulated devices are investigated in detail. The devices with the 10 wt% doped TXO-PhCz emitter layer （EML） show the best performance with a current efficiency of 52.1 cd/A, a power efficiency of 32.71re^W, and an external quantum efficiency （EQE） of 17.7%. The devices based on the lOwt%-doped TXO-PhCz EML show the best operational stability with a half-life time （LTSO） of 8Oh, which is 8 h longer than that of the reference devices based on fac-tris（2-phenylpyridinato）iridium（ Ⅲ） （Ir（ppy）a）. These indicate excellent stability of TXO-PhCz for redox and oxidation processes under electrical excitation and TXO-PhCz can be potentially used as the emitters for OLEDs with high efficiency and excellent stability. The high-performance device based on TXO-PhCz with high stability can be further improved by the optimization of the encapsulation technology and the development of a new host for TXO-PhCz.

Study on Treatment Technologies of High Concentrations of Industrial Organic Wastewater

The characteristics and harm of high concentrations of organic wastewater were introducecl firstly, and then several treatment processes and effects of high concentrations of organic wastewater were summarized, which can provide theoretical references for the choice of wastewater treatment process.

Triplet Exciton Transition Induced Highly Efficient Fluorescent Channel in Organic Electroluminescence

The in.jection of charge carriers from the electron/hole injection or transport layers in polymer light-emitting diodes potentially increases the device efficiency not by changing of charge intensity but by lattice distortion variation and quasi-particle interactions. From the low-dimensional condensed matter physics perspective, a valid mechanism is proposed to bring a type of novel channels that, under a proper external electric field, transition- forbidden triplet excitons are transformed and partially charged by charge carriers （polarons/bipolarons）, thus are able to emit light and to enhance fluorescence greatly.

Highly Efficient and Stable Hybrid White Organic Light Emitting Diodes with Controllable Exciton Behavior by a Mixed Bipolar Interlayer

Highly efficient and stable hybrid white organic light-emitting diodes （HWOLEDs） with a mixed bipolar interlayer between fluorescent blue and phosphorescent yellow emitting layers are demonstrated. The bipolar interlayer is a mixture of p-type diphenyl （l0-phenyl-lOH-spiro [acridine-9,9＇-fluoren]-3Lyl） phosphine oxide and n-type 2＇,2- （1,3,5-benzinetriyl）-tris（1-phenyl-l-H-benzimidazole）. The electroluminance and Commission Internationale de l＇Eclairage （CIE1931） coordinates＇ characteristics can be modulated easily by adjusting the ratio of the hole- predominated material to the electron-predominated material in the interlayer. The hybrid WOLED with a p-type：n-type ratio of 1：3 shows a maximum current efficiency and power efficiency of 61.1 ed/A and 55.8 lm/W, respectively, with warm white CIE coordinates of （0.34, 0.43）. The excellent efficiency and adaptive CIE coordi- nates are attributed to the mixed interlayer with improved charge carrier balance, optimized exciton distribution, and enhanced harvesting of singlet and triplet excitons.

GaInP/GaInAs/GaInNAs/Ge Four-Junction Solar Cell Grown by Metal Organic Chemical Vapor Deposition with High Efficiency

We directly grow a lattice matched GalnP/GalnAs/GalnNAs/Ge （1.88 eVil .42 eVil .05 eV/0.67eV） four-junction （4J） solar cell on a Ge substrate by the metal organic chemical vapor deposition technology. To solve the current limit of the GalnNAs sub cell, we design three kinds of anti-reflection coatings and adjust the base region thickness of the GalnNAs sub cell. Developed by a series of experiments, the external quantum efficiency of the GalnNAs sub cell exceeds 80%, and its current density reaches 11.24 mA/cm2. Therefore the current limit of the 4J solar cell is significantly improved. Moreover, we discuss the difference of test results between 4J and GalnP/GalnAs/Ge solar cells under the 1 sun AMO spectrum.

Fabrication of InAlGaN/GaN High Electron Mobility Transistors on Sapphire Substrates by Pulsed Metal Organic Chemical Vapor Deposition

Nearly lattice-matched InAIGaN/GaN heterostructure is grown on sapphire substrates by pulsed metal organic chemical vapor deposition and excellent high electron mobility transistors are fabricated on this heterostructure. The electron mobility is 1668.08cm2/V.s together with a high two-dimensional-electron-gas density of 1.43 × 10^13 cm-2 for the InAlCaN/CaN heterostructure of 2Onto InAlCaN quaternary barrier. High electron mobility transistors with gate dimensions of 1 × 50 μm2 and 4μm source-drain distance exhibit the maximum drain current of 763.91 mA/mm, the maximum extrinsic transconductance of 163.13 mS/mm, and current gain and maximum oscillation cutoff frequencies of 11 GHz and 21 GHz, respectively.

Molecular evolution of nitrogen-containing compounds in highly mature organic matter: Implications for the hydrocarbon generation potential

Evaluating the hydrocarbon generation potential of highly mature organic matter is a key and critically challenging area of research in petroleum geochemistry. To explore this issue, we used negative ion electrospray ionization-Fourier transform-ion cyclotron resonance-mass spectrometry to investigate the molecular evolution of N-containing compounds in Carboniferous-lower Permian source rocks with a range of maturities in the northwestern Junggar Basin, China. The N1compounds formed from on-fluorescent chlorophyll catabolites(NCCs), which record the characteristics of the residual soluble organic matter. These components remain in the source rocks after hydrocarbon generation and expulsion, and enable evaluation of the hydrocarbon generation potential. The newly defined indexes of molecular evolution, which are the polymerization index P1([DBE 18+DBE 15]/[DBE 12+DBE 9]_N1) and alkylation index R1(RC_(6–35)/RC_(0–5)), combined with the vitrinite reflectance(VR_(o)) and paleo-salinity index(β-carotane/n Cmax), can identify the factors that control the evolution of highly mature organic matter. The main factor for source rocks deposited in a weakly saline environment is the maturity, but for a highly saline environment both the maturity and salinity are key factors. The high salinity inhibits the molecular polymerization of organic matter and extends the oil generation peak. Given the differences in the bio-precursors in saline source rocks, we propose a new model for hydrocarbon generation that can be used to determine the oil generation potential of highly mature organic matter.

Unconventional Petroleum Sedimentology:A Key to Understanding Unconventional Hydrocarbon Accumulation

The commercial exploitation of unconventional petroleum resources(e.g.,shale oil/gas and tight oil/gas)has drastically changed the global energy structure within the past two decades.Sweet-spot intervals(areas),the most prolific unconventional hydrocarbon resources,generally consist of extraordinarily high organic matter(EHOM)deposits or closely associated sandstones/carbonate rocks.The formation of sweet-spot intervals(areas)is fundamentally controlled by their depositional and subsequent diagenetic settings,which result from the coupled sedimentation of global or regional geological events,such as tectonic activity,sea level(lake level)fluctuations,climate change,bottom water anoxia,volcanic activity,biotic mass extinction or radiation,and gravity flows during a certain geological period.Black shales with EHOM content and their associated high-quality reservoir rocks deposited by the coupling of major geological events provide not only a prerequisite for massive hydrocarbon generation but also abundant hydrocarbon storage space.The Ordovician-Silurian Wufeng-Longmaxi shale of the Sichuan Basin,Devonian Marcellus shale of the Appalachian Basin,Devonian-Carboniferous Bakken Formation of the Williston Basin,and Triassic Yanchang Formation of the Ordos Basin are four typical unconventional hydrocarbon systems selected as case studies herein.In each case,the formation of sweet-spot intervals for unconventional hydrocarbon resources was controlled by the coupled sedimentation of different global or regional geological events,collectively resulting in a favorable environment for the production,preservation,and accumulation of organic matter,as well as for the generation,migration,accumulation,and exploitation of hydrocarbons.Unconventional petroleum sedimentology,which focuses on coupled sedimentation during dramatic environmental changes driven by major geological events,is key to improve the understanding of the formation and distribution of sweet-spot intervals(areas)in unconventional petroleum systems.

High-performance organic electrolyte supercapacitors based on intrinsically powdery carbon aerogels

A novel class of powdery carbon aerogels（PCAs） has been developed by the union of microemulsion polymerization and hypercrosslinking, followed by carbonization. The resulting aerogels are in a microscale powdery form, demonstrate a well-defined 3D interconnected nanonetwork with hierarchical pores derived from numerous interstitial nanopores and intraparticle micropores, and exhibit high surface area（up to 1969 m^2/g）. Benefiting from these structural features, PCAs show impressive capacitive performances when utilized as electrodes for organic electrolyte supercapacitors,including large capacitances of up to 152 F/g, high energy densities of 37-15 Wh/kg at power densities of 34–6750 W/kg, and robust cycling stability.

Highly efficient blue organic light-emitting diodes using various hole and electron confinement layers

In this Letter, blue phosphorescence organic light-emitting diodes （PHOLEDs） employ structures for electron and/or hole confinement; 1,3,5-tris（N-phenylbenzimiazole-2-yl）benzene is used as a hole confinement layer and tris-（phenylpyrazole）iridium [Ir（ppz）3] is utilized for an electron confinement layer （ECL）. The electrical and optical properties of the fabricated blue PHOLEDs with various carrier-confinement structures are analyzed. Structures with a large ehergy offset between the carrier confinement and emitting layers enhance the charge-carrier balance in the emitting region, resulting from the effective carrier confinement. The maximum external quantum efficiency of the blue PHOLEDs with the double-ECLs is 24.02% at 1500 cd/m^2 and its luminous efficiency is 43.76 cd/A, which is 70.47% improved compared to the device without a carrier-confinement layer.

Long-range ordering of composites for organic electronics:TIPS-pentacene single crystals with incorporated nano-fibers

Multi-component active materials are widely used for organic electronic devices, with every component contributing complementary and synergistic optoelectronic functions. Mixing these components generally leads to lowered crystallinity and weakened charge transport. Therefore, preparing the active materials without substantially disrupting the crystalline lattice is highly desired. Here, we show that crystallization of TIPS-pentacene from solutions in the presence of fluorescent nanofibers of a perylene bisimide derivative （PBI） leads to formation of composites with nanoflber guest incorporated in the crystal host. In spite of the binary composite structure, the TIPS-pentacene maintains the single- crystalline nature. As a result, the incorporation of the PB1 guest introduces additional fluorescence function but does not significantly reduce the charge transport property of the TIPS-pentacene host, exhibiting field-effect mobility as high as 3.34 cm^2 V^-1 s^-1 even though 26.4% of the channel area is taken over by the guest. As such, this work provides a facile approach toward high-performance multifunctional organic electronic materials.

Optimization of the O_(3)/H_(2)O_(2) process with response surface methodology for pretreatment of mother liquor of gas field wastewater

The present study reports the use of the O_(3)/H_(2)O_(2) process in the pretreatment of the mother liquor of gas field wastewater(ML-GFW),obtained from the multi-effect distillation treatment of the gas field wastewater.The range of optimal operation conditions was obtained by single-factor experiments.Response surface methodology(RSM)based on the central composite design(CCD)was used for the optimization procedure.A regression model with Total organic carbon(TOC)removal efficiency as the response value was established(R^(2)=0.9865).The three key factors were arranged according to their significance as:pH>H_(2)O_(2) dosage>ozone flow rate.The model predicted that the best operation conditions could be obtained at a pH of 10.9,an ozone flow rate of 0.8 L/min,and H_(2)O_(2) dosage of 6.2 mL.The dosing ratio of ozone was calculated to be 9.84 mg O3/mg TOC.The maximum removal efficiency predicted was 75.9%,while the measured value was 72.3%.The relative deviation was found to be in an acceptable range.The ozone utilization and free radical quenching experiments showed that the addition of H_(2)O_(2) promoted the decomposition of ozone to produce hydroxyl radicals(·OH).This also improved the ozone utilization efficiency.Gas chromatography-mass spectrometry(GC-MS)analysis showed that most of the organic matters in ML-GFW were degraded,while some residuals needed further treatment.This study provided the data and the necessary technical supports for further research on the treatment of ML-GFW.

Combining innovative science and policy to improve air quality in cities with refining and chemicals manufacturing： The case study of Houston, Texas, USA

In Houston, a combination of urban emissions from a city of 4 million people, coupled with emissions from extensive petroleum refining and chemical manufacturing, leads to conditions for photochemistry that are unique in the United States, and historically, the city had experienced some of the highest ozone concentrations recorded in the United States. Large air quality field studies （the Texas Air Quality Studies or TexAQS I and II） were conducted to determine root causes of the high ozone concentrations. Hundreds of air quality investigators, from around the world, deployed instruments on aircraft, on ships, and at fixed ground sites to make extensive air quality measurements; detailed photochemical modeling was used to interpret and assess the implications of the measurements. The Texas Air Quality Studies revealed that both continuous and episodic emissions of light alkenes, which came to be called highly reactive volatile organic compounds, played a critical role in the formation of ozone and other photochemical oxidants in the region. Under- standing and quantifying the role of these emissions in regional air quality required innovations in characterizing emissions and in photochemical modeling. Reducing emissions required innovative policy approaches. These coupled scientific and policy innovations are described, and the result, substantially cleaner air for Houston, is documented. The lessons learned from the Houston air quality experience are relevant to cities with similar population and industrial profiles around the world.

Pressure-induced polymerization of butyndioic acid and its Li^＋ salt

Conductive organic polymers with carbonyl groups are considered as potential cathode materials of the Li^＋ battery. Driven by extremely high pressure, 2-butyndioic acid and its Li~＋ salt polymerize at around 4 and 10 GPa, respectively, which demonstrates that pressure-induced polymerization is a robust method for synthesizing substituted polyacetylene-like conductors.