New visible transparent, UV absorption, and high infrared reflection properties have been realized by depositing multilayer Si O2/Zn O: Al/Ce O2-Ti O2/Si O2 films onto glass substrates at low temperature by radio freq...New visible transparent, UV absorption, and high infrared reflection properties have been realized by depositing multilayer Si O2/Zn O: Al/Ce O2-Ti O2/Si O2 films onto glass substrates at low temperature by radio frequency magnetron sputtering. Optimum thickness of Si O2, Zn O: Al(ZAO) and Ce O2-Ti O2(CTO) films were designed with the aid of thin film design software. The degree of antireflection can be controlled by adjusting the thickness and refractive index. The outer Si O2 film can diminish the interference coloring and increase the transparency; the inner Si O2 film improves the adhesion of the coating on the glass substrate and prevents Ca2+, Na+ in the glass substrate from entering the ZAO film. The average transmittance in the visible light range increases by nearly 18%-20%, as compared to double layer ZAO/CTO films. And the films display high infrared reflection rate of above 75% in the wavelength range of 10-25 μm and good UV absorption(> 98%) properties. These systems are easy to produce on a large scale at low cost and exhibit high mechanical and chemical durability. The triple functional films with high UV absorption, antireflective and high infrared reflection rate will adapt to application in flat panel display and architectural coating glass, automotive glass, with diminishing light pollution as well as decreasing eye fatigue and increasing comfort.展开更多
The influence of high temperature effects on the protrusion of Mach stem in strong shock reflection over a wedge was numerically investigated. A two-dimensional inviscid solver applies finite volume method and unstruc...The influence of high temperature effects on the protrusion of Mach stem in strong shock reflection over a wedge was numerically investigated. A two-dimensional inviscid solver applies finite volume method and unstructured quadrilateral grids were employed to simulate the flow. Theoretical analysis was also conducted to understand the phenomenon. Both numerical and theoretical results indicate a wall-jet penetrating forward is responsible for the occurrence of Mach stem protrusion. The protrusion degree seems to depend on the thermal energy buffer capacity of the testing gas. Approaches to increase the energy buffer capacity, such as vibrational relaxation, molecular dissociation, and increase of frozen heat caoacitv, all tend to escalate the orotrusion effect.展开更多
An NO2 photoacoustic sensor system with a high reflective mirror based on a low power blue diode laser is developed in this work. The excitation power is enhanced by increasing the number of reflections. Comparing wit...An NO2 photoacoustic sensor system with a high reflective mirror based on a low power blue diode laser is developed in this work. The excitation power is enhanced by increasing the number of reflections. Comparing with a traditional photoacoustic system, the pool constant is improved from 300.24(Pa·cm)/W to 1450.64(Pa·cm)/W, and the signal sensitivity of the photoacoustic sensor is increased from 0.016 μV/ppb to 0.2562 μV/ppb. The characteristics of temperature and humidity of the new photoacoustic sensor are also obtained, and the algorithm is adjusted to provide a quantitative response and drift of the resonance frequency. The results of this research provide a new method and concept for further developing the NO2 photoacoustic sensors.展开更多
The Kubelka-Munk revised theory was adopted to derive the mix design theory of high solar reflectance and high emissivity coatings.When the concentration of each colorant is within 20%,and the width of the coating is ...The Kubelka-Munk revised theory was adopted to derive the mix design theory of high solar reflectance and high emissivity coatings.When the concentration of each colorant is within 20%,and the width of the coating is more than 200 μm,each colorant has enough covering power in visible and near-infrared spectral range.It can be assumed that the addition of colorants in coatings can only change the solar spectral absorption ratio rather than solar spectral scattering coefficient.The spectral scattering coefficient of coatings tends to a constant.The spectral absorption-scattering property of each colorant can be characterized through one parameter.The spectral absorption-scattering coefficient of coatings can be calculated with the multivariate linear relationship of each pigment.Moreover,the results can be expanded for high solar reflectivity and high long-wave emissivity coating preparation.The accuracy of Kubelka-Munk revised theory has been tested and verified through comparison between the calculated value and tested value of coating reflectance.展开更多
A novel instrument that integrates reflection high energy electron diffraction(RHEED),electron energy loss spectroscopy(EELS),and imaging is designed and simulated.Since it can correlate the structural,elemental,and s...A novel instrument that integrates reflection high energy electron diffraction(RHEED),electron energy loss spectroscopy(EELS),and imaging is designed and simulated.Since it can correlate the structural,elemental,and spatial information of the same surface region via the simultaneously acquired patterns of RHEED,EELS,and energy-filtered electron microscopy,it is named correlative reflection electron microscopy(c-REM).Our simulation demonstrates that the spatial resolution of this c-REM is lower than 50 nm,which meets the requirements for in-situ monitoring the structural and chemical evolution of surface in advanced material.展开更多
In response to the development of the concepts of“carbon neutrality”and“carbon peak”,it is critical to developing materials with high near-infrared(NIR)solar reflectivity and high emissivity in the atmospheric tra...In response to the development of the concepts of“carbon neutrality”and“carbon peak”,it is critical to developing materials with high near-infrared(NIR)solar reflectivity and high emissivity in the atmospheric transparency window(ATW;8–13μm)to advance zero energy consumption radiative cooling technology.To regulate emission and reflection properties,a series of high-entropy rare earth stannate ceramics(HE-RE_(2)Sn_(2)O_(7):(Y_(0.2)La_(0.2)Nd_(0.2)Eu_(0.2)Gd_(0.2))_(2)Sn_(2)O_(7),(Y_(0.2)La_(0.2)Sm_(0.2)Eu_(0.2)Lu_(0.2))_(2)Sn_(2)O_(7),and(Y_(0.2)La_(0.2)Gd_(0.2)Yb_(0.2)Lu_(0.2))_(2)Sn_(2)O_(7))with severe lattice distortion were prepared using a solid phase reaction followed by a pressureless sintering method for the first time.Lattice distortion is accomplished by introducing rare earth elements with different cation radii and mass.The as-synthesized HE-RE_(2)Sn_(2)O_(7)ceramics possess high ATW emissivity(91.38%–95.41%),high NIR solar reflectivity(92.74%–97.62%),low thermal conductivity(1.080–1.619 W·m^(−1)·K^(−1)),and excellent chemical stability.On the one hand,the lattice distortion intensifies the asymmetry of the structural unit to cause a notable alteration in the electric dipole moment,ultimately enlarging the ATW emissivity.On the other hand,by selecting difficult excitation elements,HE-RE_(2)Sn_(2)O_(7),which has a wide band gap(Eg),exhibits high NIR solar reflectivity.Hence,the multi-component design can effectively enhance radiative cooling ability of HE-RE_(2)Sn_(2)O_(7)and provide a novel strategy for developing radiative cooling materials.展开更多
Based on Chen-Haus ' theory~[1] , an experimental research on the reflection of SAW from a short-circuited Au -grating on YZ LiNbO3 and a short-circuited Al- recessed groove grating on ST-X quartz is first present...Based on Chen-Haus ' theory~[1] , an experimental research on the reflection of SAW from a short-circuited Au -grating on YZ LiNbO3 and a short-circuited Al- recessed groove grating on ST-X quartz is first presented in this paper where an anomalous reflection phenomena existing in two gratings are confirmed. In addition, a residual reflection which couldn 't be completely cancelled by means of changing strip-thickness is pointed out for a short-circuited Au-grating on YZ LiNbO3 both experimentally and theoretically through extending Chen-Haus 'theory to anisotropic crystals.Finally, two kinds of IDT composed of single electrodes: Au-electrode on YZ LiNbO3 and Al-recessed - groove - electrode on ST-X quartz, are proposed for high internal reflection suppression. The experimental results of bandpass filters constructed with the IDTs mentioned above show a great improvement in passband distortion and a potential usefulness of new structure in high frequency range.展开更多
The laser welding(LW)process of highly reflective materials presents low thermal efficiency and poor stability.To solve the problem,the effects of subatmospheric environment on LW process,technological parameters in s...The laser welding(LW)process of highly reflective materials presents low thermal efficiency and poor stability.To solve the problem,the effects of subatmospheric environment on LW process,technological parameters in subatmospheric environment on weld formation and welding with sinusoidal modulation of laser power on the stability of LW process in subatmospheric environment were explored.The AZ31magnesium(Mg)alloy was used as the test materials.The test result revealed that the weld penetration in subatmospheric environment can increase by more than ten times compared with that under normal pressure.After the keyhole depth greatly rises,significantly periodic local bulge is observed on the backwall surface of the keyhole and the position of the bulge shifts along the direction of the keyhole depth.Eventually,the hump-shaped surface morphology of the welded seam is formed;moreover,the weld width in local zones in the lower part of the welded seam remarkably grows.During LW in subatmospheric environment,the weld penetration can be further greatly increased through power modulation.Besides,power modulation can inhibit the occurrence of bulges in local zones on the backwall of the keyhole during LW in subatmospheric environment,thus further curbing the significant growth of the weld widths of hump-shaped welding beads and local zones in the lower part of welded seams.Finally,the mechanism of synchronously improving the thermal efficiency and stability of LW process of highly reflective materials through power modulation in subatmospheric environment was illustrated.This was conducted according to theoretical analysis of recoil pressure and observation results of dynamic behaviors of laser induced plasma clouds and keyholes in the molten pool through high speed photography.展开更多
Heteroepitaxial GaN films are grown on sapphire (0001) substrates using laser molecular beam epitaxy. The growth processes are in-situ monitored by reflection high energy electron diffraction. It is revealed that th...Heteroepitaxial GaN films are grown on sapphire (0001) substrates using laser molecular beam epitaxy. The growth processes are in-situ monitored by reflection high energy electron diffraction. It is revealed that the growth mode of GaN transformed from three-dimensional (3D) island mode to two-dimensional (2D) layer-by-layer mode with the increase of thickness. This paper investigates the interfacial strain relaxation of GaN films by analysing their diffraction patterns. Calculation shows that the strain is completely relaxed when the thickness reaches 15 nm. The surface morphology evolution indicates that island merging and reduction of the island-edge barrier provide an effective way to make GaN films follow a 2D layer-by-layer growth mode. The ll0-nm GaN films with a 2D growth mode have smooth regular hexagonal shapes. The X-ray diffraction indicates that thickness has a significant effect on the crystallized quality of GaN thin films.展开更多
High Q reflection filter using a gradient-index(GI) membrane with a grating surface is proposed. The thickness of GI membrane is very small comparing with the traditional multilayer reflection filter or the GI reflect...High Q reflection filter using a gradient-index(GI) membrane with a grating surface is proposed. The thickness of GI membrane is very small comparing with the traditional multilayer reflection filter or the GI reflection filter, and the GI membrane can also break the restriction of the resonant excitation condition of the conventional guided-mode resonance(GMR) filter. High Q filtering features can be maintained even on the high-index substrate. The grating thickness of the GI membrane filter can be used to select the resonance wavelength with different quality factors(QFs), the reflection peak is blue-shifted, and the QF is decreased from 554.4 to 207.8 as the grating thickness is increased from 50 nm to 150 nm. The gradient coefficient of the GI membrane filter can be used to tailor the number of the reflection channels. The resonant excitations of high order waveguide modes confined in the GI membrane are responsible for the high Q filtering properties with multiple channels.展开更多
A zinc oxide thin film in cubic crystalline phase, which is usually prepared under high pressure, has been grown on the Mg O(001) substrate by a three-step growth using plasma-assisted molecular beam epitaxy. The cu...A zinc oxide thin film in cubic crystalline phase, which is usually prepared under high pressure, has been grown on the Mg O(001) substrate by a three-step growth using plasma-assisted molecular beam epitaxy. The cubic structure is confirmed by in-situ reflection high energy electron diffraction measurements and simulations. The x-ray photoelectron spectroscopy reveals that the outer-layer surface of the film(less than 5 nm thick) is of ZnO phase while the buffer layer above the substrate is of ZnMgO phase, which is further confirmed by the band edge transmissions at the wavelengths of about 390 nm and 280 nm, respectively. The x-ray diffraction exhibits no peaks related to wurtzite ZnO phase in the film. The cubic ZnO film is presumably considered to be of the rock-salt phase. This work suggests that the metastable cubic ZnO films, which are of applicational interest for p-type doping, can be epitaxially grown on the rock-salt substrates without the usually needed high pressure conditions.展开更多
Environment-friendly pigments based on AFeO_(3)(A=La,Pr,Nd,Sm,Gd,Tb,Y or Yb)with high nearinfrared(NIR)reflectance were synthesised by a coprecipitation method at 1200℃.The Rietveld refinement analysis showed single-...Environment-friendly pigments based on AFeO_(3)(A=La,Pr,Nd,Sm,Gd,Tb,Y or Yb)with high nearinfrared(NIR)reflectance were synthesised by a coprecipitation method at 1200℃.The Rietveld refinement analysis showed single-phase orthorhombic perovskite for all compositions.All pigments,which showed reddish hues,offered good colour stability after mixing these pigments in powder form with siloxane transparent paint and two different glazes.The powderepaint mixtures produced with GdFeO_(3),TbFeO_(3) and YFeO_(3) pigments have the highest NIR solar reflectance,reaching values of R=50%.The temperature shielding studies conducted using TbFeO_(3) pigmentepaint mixture for a roof coating yielded a reduction of 3.2℃ in comparison to a commercial pigment.Moreover,the glazes that were pigmented using GdFeO_(3),TbFeO_(3) and YFeO_(3) compositions also presented the most intense reddish colours.A study of the thermal and chemical stability of the pigment with the highest NIR solar reflectance showed good stability in both cases.The reddish pigments that were prepared can therefore be good candidates for use in different applications such as cool pigments or pigments for ceramic glazes at high temperatures.展开更多
A novel COB (chip-on-board) structure with integrated multifunction is presented. The structure is prepared by laminating copper plate with FR4 board and then coating with a silver layer to offer high reflectivity a...A novel COB (chip-on-board) structure with integrated multifunction is presented. The structure is prepared by laminating copper plate with FR4 board and then coating with a silver layer to offer high reflectivity and high conductivity. In comparison with MCPCB (aluminum) and ceramics (Al2O3) board, the substrate brings about 10% higher light extracting efficiency than aluminum board and 5% higher flux maintenance ratio than ceramics (Al2O3) board at 3000 h. With integrated multifunction, through an IC component driving high voltage serial LED chips, the COB can be directly connected to AC 110 V or 220 V power supply in lighting application.展开更多
基金Funded by the Natural Science Foundation of Hubei Province(No.2014CFB563)the key Technology Innovation Project of Hubei Province(No.2013AAA005)China Postdoctoral Science Foundation(Nos.2013T60752 and 2012M511689)
文摘New visible transparent, UV absorption, and high infrared reflection properties have been realized by depositing multilayer Si O2/Zn O: Al/Ce O2-Ti O2/Si O2 films onto glass substrates at low temperature by radio frequency magnetron sputtering. Optimum thickness of Si O2, Zn O: Al(ZAO) and Ce O2-Ti O2(CTO) films were designed with the aid of thin film design software. The degree of antireflection can be controlled by adjusting the thickness and refractive index. The outer Si O2 film can diminish the interference coloring and increase the transparency; the inner Si O2 film improves the adhesion of the coating on the glass substrate and prevents Ca2+, Na+ in the glass substrate from entering the ZAO film. The average transmittance in the visible light range increases by nearly 18%-20%, as compared to double layer ZAO/CTO films. And the films display high infrared reflection rate of above 75% in the wavelength range of 10-25 μm and good UV absorption(> 98%) properties. These systems are easy to produce on a large scale at low cost and exhibit high mechanical and chemical durability. The triple functional films with high UV absorption, antireflective and high infrared reflection rate will adapt to application in flat panel display and architectural coating glass, automotive glass, with diminishing light pollution as well as decreasing eye fatigue and increasing comfort.
文摘The influence of high temperature effects on the protrusion of Mach stem in strong shock reflection over a wedge was numerically investigated. A two-dimensional inviscid solver applies finite volume method and unstructured quadrilateral grids were employed to simulate the flow. Theoretical analysis was also conducted to understand the phenomenon. Both numerical and theoretical results indicate a wall-jet penetrating forward is responsible for the occurrence of Mach stem protrusion. The protrusion degree seems to depend on the thermal energy buffer capacity of the testing gas. Approaches to increase the energy buffer capacity, such as vibrational relaxation, molecular dissociation, and increase of frozen heat caoacitv, all tend to escalate the orotrusion effect.
基金National Natural Science Foundation of China(Grant Nos.91644107,61575206,51904009,and 41905130)National Key Research and Development Program of China(Grant Nos.2017YFC0209401,2017YFC0209403,and 2017YFC0209902)the Outstanding Young Talents Program of Anhui University,China(Grant No.gxyq2019022).
文摘An NO2 photoacoustic sensor system with a high reflective mirror based on a low power blue diode laser is developed in this work. The excitation power is enhanced by increasing the number of reflections. Comparing with a traditional photoacoustic system, the pool constant is improved from 300.24(Pa·cm)/W to 1450.64(Pa·cm)/W, and the signal sensitivity of the photoacoustic sensor is increased from 0.016 μV/ppb to 0.2562 μV/ppb. The characteristics of temperature and humidity of the new photoacoustic sensor are also obtained, and the algorithm is adjusted to provide a quantitative response and drift of the resonance frequency. The results of this research provide a new method and concept for further developing the NO2 photoacoustic sensors.
基金Supported by the 12th Five-year National Science and Technology Support Plan(No.2011BAE27B04)the Natural Science Foundation of China(No.51378391)the China Scholarship Council(award to HE Yan for studying in the University of Toronto)
文摘The Kubelka-Munk revised theory was adopted to derive the mix design theory of high solar reflectance and high emissivity coatings.When the concentration of each colorant is within 20%,and the width of the coating is more than 200 μm,each colorant has enough covering power in visible and near-infrared spectral range.It can be assumed that the addition of colorants in coatings can only change the solar spectral absorption ratio rather than solar spectral scattering coefficient.The spectral scattering coefficient of coatings tends to a constant.The spectral absorption-scattering property of each colorant can be characterized through one parameter.The spectral absorption-scattering coefficient of coatings can be calculated with the multivariate linear relationship of each pigment.Moreover,the results can be expanded for high solar reflectivity and high long-wave emissivity coating preparation.The accuracy of Kubelka-Munk revised theory has been tested and verified through comparison between the calculated value and tested value of coating reflectance.
基金Project supported by the Shanghai Tech University and the National Natural Science Foundation of China(Grant No.11774039)。
文摘A novel instrument that integrates reflection high energy electron diffraction(RHEED),electron energy loss spectroscopy(EELS),and imaging is designed and simulated.Since it can correlate the structural,elemental,and spatial information of the same surface region via the simultaneously acquired patterns of RHEED,EELS,and energy-filtered electron microscopy,it is named correlative reflection electron microscopy(c-REM).Our simulation demonstrates that the spatial resolution of this c-REM is lower than 50 nm,which meets the requirements for in-situ monitoring the structural and chemical evolution of surface in advanced material.
基金the Lingchuang Research Project of China National Nuclear Co.,the National Key R&D Program of China(No.2022YFB3504302)the Fujian Provincial Natural Fund Project(No.2021J05101)+1 种基金the Young Elite Scientists Sponsorship Program by CAST(No.YESS20210336)the XMIREM autonomously deployment project(No.2023GG03).
文摘In response to the development of the concepts of“carbon neutrality”and“carbon peak”,it is critical to developing materials with high near-infrared(NIR)solar reflectivity and high emissivity in the atmospheric transparency window(ATW;8–13μm)to advance zero energy consumption radiative cooling technology.To regulate emission and reflection properties,a series of high-entropy rare earth stannate ceramics(HE-RE_(2)Sn_(2)O_(7):(Y_(0.2)La_(0.2)Nd_(0.2)Eu_(0.2)Gd_(0.2))_(2)Sn_(2)O_(7),(Y_(0.2)La_(0.2)Sm_(0.2)Eu_(0.2)Lu_(0.2))_(2)Sn_(2)O_(7),and(Y_(0.2)La_(0.2)Gd_(0.2)Yb_(0.2)Lu_(0.2))_(2)Sn_(2)O_(7))with severe lattice distortion were prepared using a solid phase reaction followed by a pressureless sintering method for the first time.Lattice distortion is accomplished by introducing rare earth elements with different cation radii and mass.The as-synthesized HE-RE_(2)Sn_(2)O_(7)ceramics possess high ATW emissivity(91.38%–95.41%),high NIR solar reflectivity(92.74%–97.62%),low thermal conductivity(1.080–1.619 W·m^(−1)·K^(−1)),and excellent chemical stability.On the one hand,the lattice distortion intensifies the asymmetry of the structural unit to cause a notable alteration in the electric dipole moment,ultimately enlarging the ATW emissivity.On the other hand,by selecting difficult excitation elements,HE-RE_(2)Sn_(2)O_(7),which has a wide band gap(Eg),exhibits high NIR solar reflectivity.Hence,the multi-component design can effectively enhance radiative cooling ability of HE-RE_(2)Sn_(2)O_(7)and provide a novel strategy for developing radiative cooling materials.
文摘Based on Chen-Haus ' theory~[1] , an experimental research on the reflection of SAW from a short-circuited Au -grating on YZ LiNbO3 and a short-circuited Al- recessed groove grating on ST-X quartz is first presented in this paper where an anomalous reflection phenomena existing in two gratings are confirmed. In addition, a residual reflection which couldn 't be completely cancelled by means of changing strip-thickness is pointed out for a short-circuited Au-grating on YZ LiNbO3 both experimentally and theoretically through extending Chen-Haus 'theory to anisotropic crystals.Finally, two kinds of IDT composed of single electrodes: Au-electrode on YZ LiNbO3 and Al-recessed - groove - electrode on ST-X quartz, are proposed for high internal reflection suppression. The experimental results of bandpass filters constructed with the IDTs mentioned above show a great improvement in passband distortion and a potential usefulness of new structure in high frequency range.
基金supported by National Natural Science Foundation of China(Grants No.52005393,51275391)National Thousand Talents Program of China(Grant No.WQ2017610446)。
文摘The laser welding(LW)process of highly reflective materials presents low thermal efficiency and poor stability.To solve the problem,the effects of subatmospheric environment on LW process,technological parameters in subatmospheric environment on weld formation and welding with sinusoidal modulation of laser power on the stability of LW process in subatmospheric environment were explored.The AZ31magnesium(Mg)alloy was used as the test materials.The test result revealed that the weld penetration in subatmospheric environment can increase by more than ten times compared with that under normal pressure.After the keyhole depth greatly rises,significantly periodic local bulge is observed on the backwall surface of the keyhole and the position of the bulge shifts along the direction of the keyhole depth.Eventually,the hump-shaped surface morphology of the welded seam is formed;moreover,the weld width in local zones in the lower part of the welded seam remarkably grows.During LW in subatmospheric environment,the weld penetration can be further greatly increased through power modulation.Besides,power modulation can inhibit the occurrence of bulges in local zones on the backwall of the keyhole during LW in subatmospheric environment,thus further curbing the significant growth of the weld widths of hump-shaped welding beads and local zones in the lower part of welded seams.Finally,the mechanism of synchronously improving the thermal efficiency and stability of LW process of highly reflective materials through power modulation in subatmospheric environment was illustrated.This was conducted according to theoretical analysis of recoil pressure and observation results of dynamic behaviors of laser induced plasma clouds and keyholes in the molten pool through high speed photography.
基金supported by the Major State Basic Research Development Program of China (Grant No. 61363)the National Natural Science Foundation of China (Grant Nos. 50772019 and 61021061)
文摘Heteroepitaxial GaN films are grown on sapphire (0001) substrates using laser molecular beam epitaxy. The growth processes are in-situ monitored by reflection high energy electron diffraction. It is revealed that the growth mode of GaN transformed from three-dimensional (3D) island mode to two-dimensional (2D) layer-by-layer mode with the increase of thickness. This paper investigates the interfacial strain relaxation of GaN films by analysing their diffraction patterns. Calculation shows that the strain is completely relaxed when the thickness reaches 15 nm. The surface morphology evolution indicates that island merging and reduction of the island-edge barrier provide an effective way to make GaN films follow a 2D layer-by-layer growth mode. The ll0-nm GaN films with a 2D growth mode have smooth regular hexagonal shapes. The X-ray diffraction indicates that thickness has a significant effect on the crystallized quality of GaN thin films.
基金supported by the National Natural Science Foundation of China(No.11404143)the Fundamental Research Funds for the Central Universities(No.JUSRP115A15)the Jiangsu Provincial Research Center of Light Industrial Optoelectronic Engineering and Technology(No.BM2014402)
文摘High Q reflection filter using a gradient-index(GI) membrane with a grating surface is proposed. The thickness of GI membrane is very small comparing with the traditional multilayer reflection filter or the GI reflection filter, and the GI membrane can also break the restriction of the resonant excitation condition of the conventional guided-mode resonance(GMR) filter. High Q filtering features can be maintained even on the high-index substrate. The grating thickness of the GI membrane filter can be used to select the resonance wavelength with different quality factors(QFs), the reflection peak is blue-shifted, and the QF is decreased from 554.4 to 207.8 as the grating thickness is increased from 50 nm to 150 nm. The gradient coefficient of the GI membrane filter can be used to tailor the number of the reflection channels. The resonant excitations of high order waveguide modes confined in the GI membrane are responsible for the high Q filtering properties with multiple channels.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11204253,U1232110,U1332105,61227009,and 91321102)the Fundamental Research Funds for Central Universities,China(Grant No.2013SH001)the National High Technology Research and Development Program of China(Grant No.2014AA052202)
文摘A zinc oxide thin film in cubic crystalline phase, which is usually prepared under high pressure, has been grown on the Mg O(001) substrate by a three-step growth using plasma-assisted molecular beam epitaxy. The cubic structure is confirmed by in-situ reflection high energy electron diffraction measurements and simulations. The x-ray photoelectron spectroscopy reveals that the outer-layer surface of the film(less than 5 nm thick) is of ZnO phase while the buffer layer above the substrate is of ZnMgO phase, which is further confirmed by the band edge transmissions at the wavelengths of about 390 nm and 280 nm, respectively. The x-ray diffraction exhibits no peaks related to wurtzite ZnO phase in the film. The cubic ZnO film is presumably considered to be of the rock-salt phase. This work suggests that the metastable cubic ZnO films, which are of applicational interest for p-type doping, can be epitaxially grown on the rock-salt substrates without the usually needed high pressure conditions.
基金Authors thanks the Universitat Jaume I[UJI-B2019-41]the Ministerio de Economía,Industria y Competitividad[MAT2016-80410-P]for financial support.
文摘Environment-friendly pigments based on AFeO_(3)(A=La,Pr,Nd,Sm,Gd,Tb,Y or Yb)with high nearinfrared(NIR)reflectance were synthesised by a coprecipitation method at 1200℃.The Rietveld refinement analysis showed single-phase orthorhombic perovskite for all compositions.All pigments,which showed reddish hues,offered good colour stability after mixing these pigments in powder form with siloxane transparent paint and two different glazes.The powderepaint mixtures produced with GdFeO_(3),TbFeO_(3) and YFeO_(3) pigments have the highest NIR solar reflectance,reaching values of R=50%.The temperature shielding studies conducted using TbFeO_(3) pigmentepaint mixture for a roof coating yielded a reduction of 3.2℃ in comparison to a commercial pigment.Moreover,the glazes that were pigmented using GdFeO_(3),TbFeO_(3) and YFeO_(3) compositions also presented the most intense reddish colours.A study of the thermal and chemical stability of the pigment with the highest NIR solar reflectance showed good stability in both cases.The reddish pigments that were prepared can therefore be good candidates for use in different applications such as cool pigments or pigments for ceramic glazes at high temperatures.
文摘A novel COB (chip-on-board) structure with integrated multifunction is presented. The structure is prepared by laminating copper plate with FR4 board and then coating with a silver layer to offer high reflectivity and high conductivity. In comparison with MCPCB (aluminum) and ceramics (Al2O3) board, the substrate brings about 10% higher light extracting efficiency than aluminum board and 5% higher flux maintenance ratio than ceramics (Al2O3) board at 3000 h. With integrated multifunction, through an IC component driving high voltage serial LED chips, the COB can be directly connected to AC 110 V or 220 V power supply in lighting application.