Correg-Yolov3:a Method for Dense Buildings Detection in High-resolution Remote Sensing Images

The exploration of building detection plays an important role in urban planning,smart city and military.Aiming at the problem of high overlapping ratio of detection frames for dense building detection in high resolution remote sensing images,we present an effective YOLOv3 framework,corner regression-based YOLOv3(Correg-YOLOv3),to localize dense building accurately.This improved YOLOv3 algorithm establishes a vertex regression mechanism and an additional loss item about building vertex offsets relative to the center point of bounding box.By extending output dimensions,the trained model is able to output the rectangular bounding boxes and the building vertices meanwhile.Finally,we evaluate the performance of the Correg-YOLOv3 on our self-produced data set and provide a comparative analysis qualitatively and quantitatively.The experimental results achieve high performance in precision(96.45%),recall rate(95.75%),F1 score(96.10%)and average precision(98.05%),which were 2.73%,5.4%,4.1%and 4.73%higher than that of YOLOv3.Therefore,our proposed algorithm effectively tackles the problem of dense building detection in high resolution images.

Three-dimensional time-of-flight magnetic resonance angiography combined with high resolution T2-weighted imaging in preoperative evaluation of microvascular decompression

BACKGROUND Neurovascular compression(NVC) is the main cause of primary trigeminal neuralgia(TN) and hemifacial spasm(HFS). Microvascular decompression(MVD) is an effective surgical method for the treatment of TN and HFS caused by NVC. The judgement of NVC is a critical step in the preoperative evaluation of MVD, which is related to the effect of MVD treatment. Magnetic resonance imaging(MRI) technology has been used to detect NVC prior to MVD for several years. Among many MRI sequences, three-dimensional time-of-flight magnetic resonance angiography(3D TOF MRA) is the most widely used. However, 3D TOF MRA has some shortcomings in detecting NVC. Therefore, 3D TOF MRA combined with high resolution T2-weighted imaging(HR T2WI) is considered to be a more effective method to detect NVC.AIM To determine the value of 3D TOF MRA combined with HR T2WI in the judgment of NVC, and thus to assess its value in the preoperative evaluation of MVD.METHODS Related studies published from inception to September 2022 based on PubMed, Embase, Web of Science, and the Cochrane Library were retrieved. Studies that investigated 3D TOF MRA combined with HR T2WI to judge NVC in patients with TN or HFS were included according to the inclusion criteria. Studies without complete data or not relevant to the research topics were excluded. The Quality Assessment of Diagnostic Accuracy Studies checklist was used to assess the quality of included studies. The publication bias of the included literature was examined by Deeks’ test. An exact binomial rendition of the bivariate mixed-effects regression model was used to synthesize data. Data analysis was performed using the MIDAS module of statistical software Stata 16.0. Two independent investigators extracted patient and study characteristics, and discrepancies were resolved by consensus. Individual and pooled sensitivities and specificities were calculated. The I_(2) statistic and Q test were used to test heterogeneity. The study was registered on the website of PROSERO(registration No. CRD42022357158).RESULTS Our search identified 595 articles, of which 12(including 855 patients) fulfilled the inclusion criteria. Bivariate analysis showed that the pooled sensitivity and specificity of 3D TOF MRA combined with HR T2WI for detecting NVC were 0.96 [95% confidence interval(CI): 0.92-0.98] and 0.92(95%CI: 0.74-0.98), respectively. The pooled positive likelihood ratio was 12.4(95%CI: 3.2-47.8), pooled negative likelihood ratio was 0.04(95%CI: 0.02-0.09), and pooled diagnostic odds ratio was 283(95%CI: 50-1620). The area under the receiver operating characteristic curve was 0.98(95%CI: 0.97-0.99). The studies showed no substantial heterogeneity(I2 = 0, Q = 0.001 P = 0.50).CONCLUSION Our results suggest that 3D TOF MRA combined with HR T2WI has excellent sensitivity and specificity for judging NVC in patients with TN or HFS. This method can be used as an effective tool for preoperative evaluation of MVD.

Automatic Road Extraction Using Particle Filters from High Resolution Images

Road extraction plays an important role in many applications such as car navigation, but the manual extraction of roads is a laborious, tedious task. To speed the extraction of roads, an approach based on particle filtering to extract automatically roads from high resolution imagery is proposed. Particle filtering provides a statistical framework for propagating sample-based approximations of posterior distributions and has almost no restriction on the ingredients of the model. We integrate the similarity of grey value and the edge point distribution of roads into particle filtering to deal with complex scenes. To handle road appearance changes the tracking algorithm is allowed to update the road model during temporally stable image observations. A fully automatic initialization strategy is used. Experimental results show that the proposed approach is a promising and fully automatic method for extracting roads from images, even in the presence of occlusions.

HIGH RESOLUTION STUDY OF TWINS IN Al_(20)Cu_2Mn_3 PHASE

The dispersoid phase Al_(20)Cu_2Mn_3 in a 2024 Al alloy is commonly composed of twins,An ob- servation of corresponding high resolution image shows that the twin boundary plane is a glide plane other than mirror one.Two neighbouring components of twins are not symmetry of re- flection or rotation,but of glide reflection.The“diamond”glide plane is(101)and the glide vector is(1/4)(-).Components of twins in the phase take shape of prism with the longitudinal edge being parallel to[010]and side faces being{101}and{100}.

Integrating cross-sensor high spatial resolution satellite images to detect subtle forest vegetation change in the Purple Mountains,a national scenic spot in Nanjing,China

Accurate information on the location and magnitude of vegetation change in scenic areas can guide the configuration of tourism facilities and the formulation of vegetation protection measures.High spatial resolution remote sensing images can be used to detect subtle vegetation changes.The major objective of this study was to map and quantify forest vegetation changes in a national scenic location,the Purple Mountains of Nanjing,China,using multi-temporal cross-sensor high spatial resolution satellite images to identify the main drivers of the vegetation changes and provide a reference for sustainable management.We used Quickbird images acquired in 2004,IKONOS images acquired in 2009,and WorldView2 images acquired in 2015.Four pixel-based direct change detection methods including the normalized difference vegetation index difference method,multi-index integrated change analysis(MIICA),principal component analysis,and spectral gradient difference analysis were compared in terms of their change detection performances.Subsequently,the best pixel-based detection method in conjunction with object-oriented image analysis was used to extract subtle forest vegetation changes.An accuracy assessment using the stratified random sampling points was conducted to evaluate the performance of the change detection results.The results showed that the MIICA method was the best pixel-based change detection method.And the object-oriented MIICA with an overall accuracy of 0.907 and a kappa coefficient of 0.846 was superior to the pixel-based MIICA.From 2004 to 2009,areas of vegetation gain mainly occurred around the periphery of the study area,while areas of vegetation loss were observed in the interior and along the boundary of the study area due to construction activities,which contributed to 79%of the total area of vegetation loss.During 2009–2015,the greening initiatives around the construction areas increased the forest vegetation coverage,accounting for 84%of the total area of vegetation gain.In spite of this,vegetation loss occurred in the interior of the Purple Mountains due to infrastructure development that caused conversion from vegetation to impervious areas.We recommend that:(1)a local multi-agency team inspect and assess law enforcement regarding natural resource utilization;and(2)strengthen environmental awareness education.

Monitoring of Karst Rocky Desertification Control Projects Based on Remote Sensing Images with Medium and High Spatial Resolution——A Case Study of Disi River Basin in Puan County

[ Objective] The study aimed to improve methods of monitoring Karst Rocky Desertification （KRD） control projects and increase the working efficiency. [Method] Based on remote sensing images with medium and high spatial resolution, KRD control projects in Disi River basin in Puan County were monitored, that is, information of the project construction in the study area was extracted using supervised classification and hu- man-computer interactive interpretation, and the monitoring results were testified with the aid of GPS. [Result] It was feasible to monitor KRD con- trol projects in Disi River basin based on remote sensing images with medium and high resolution, and the monitoring accuracy was satisfactory, reaching above 80% or 90%, so the method is worthy of popularizing. [ Conclusion] Remote sensing images with medium and high resolution can be used to monitor other KRD control Droiects.

A novel high resolution image denoising algorithm based on Calman filter and texture feature extraction

Calman filtering method based on wavelet transform has been successfully applied to signal denoising. According to the different application methods and the realization forms of Calman filter, combined with the structural analysis of wavelet decomposition, we present kinds of multi-scale filtering methods into the category of the three. The simulation results show that the multi-scale Calman filtering method based on system layer has better performance. Synthetic aperture radar （SAR） images have rich texture information, which can reflect the spatial structure of objects. The texture feature is widely used in SAR image classification and SAR image segmentation. Affected by imaging factors, the direct use of texture features extracted from SAR images is not good enough. In order to avoid the traditional method of filtering followed the texture feature extraction caused by the loss of texture and edge information, this paper presents a texture feature extraction of SAR image, then using Robust PCA method, finally using texture feature clustering method K-means test after treatment with RPCA expression.

A Two-Stage Algorithm of High Resolution Image Alignment for Mobile Applications

Global motion estimation (GME) algorithms are widely applied to computer vision and video processing. In the previous works, the image resolutions are usually low for the real-time requirement (e.g. video stabilization). However, in some mobile devices applications (e.g. image sequence panoramic stitching), the high resolution is necessary to obtain satisfactory quality of panoramic image. However, the computational cost will become too expensive to be suitable for the low power consumption requirement of mobile device. The full search algorithm can obtain the global minimum with extremely computational cost, while the typical fast algorithms may suffer from the local minimum problem. This paper proposed a fast algorithm to deal with 2560 × 1920 high-resolution (HR) image sequences. The proposed method estimates the motion vector by a two-level coarse-to-fine scheme which only exploits sparse reference blocks (25 blocks in this paper) in each level to determine the global motion vector, thus the computational costs are significantly decreased. In order to increase the effective search range and robustness, the predictive motion vector (PMV) technique is used in this work. By the comparisons of computational complexity, the proposed algorithm costs less addition operations than the typical Three-Step Search algorithm (TSS) for estimating the global motion of the HR images without the local minimum problem. The quantitative evaluations show that our method is comparable to the full search algorithm (FSA) which is considered to be the golden baseline.

Hcable for Time-Lapse Seismic Monitoring of Marine Carbon Capture and Storage

To ensure project safety and secure public support, an integrated and comprehensive monitoring program is needed within a carbon capture and storage(CCS) project. Monitoring can be done using many well-established techniques from various fields, and the seismic method proves to be the crucial one. This method is widely used to determine the CO_(2) distribution, image the plume development, and quantitatively estimate the concentration. Because both the CO_(2) distribution and the potential migration pathway can be spatially small scale, high resolution for seismic imaging is demanded. However, obtaining a high-resolution image of a subsurface structure in marine settings is difficult. Herein, we introduce the novel Hcable(Harrow-like cable system) technique, which may be applied to offshore CCS monitoring. This technique uses a highfrequency source(the dominant frequency>100 Hz) to generate seismic waves and a combination of a long cable and several short streamers to receive seismic waves. Ultrahigh-frequency seismic images are achieved through the processing of Hcable seismic data. Hcable is then applied in a case study to demonstrate its detailed characterization for small-scale structures. This work reveals that Hcable is a promising tool for timelapse seismic monitoring of oceanic CCS.

Inverse synthetic aperture radar imaging based on sparse signal processing

Based on the measurement model of inverse synthetic aperture radar (ISAR) within a small aspect sector,an imaging method was presented with the application of sparse signal processing.This method can form higher resolution inverse synthetic aperture radar images from compensating incomplete measured data,and improves the clarity of the images and makes the feature structure much more clear,which is helpful for target recognition.The simulation results indicate that this method can provide clear ISAR images with high contrast under complex motion case.

Wall Imaging for Unilateral Intracranial Vertebral Artery Hypoplasia with Three-dimensional High-isotropic Resolution Magnetic Resonance Images

Background：There are few studies for evaluating wall characteristics of intracranial vertebral artery hypoplasia （VAH）.The aim of this study was to determine wall characteristics of VAH with three-dimensional volumetric isotropic turbo spin echo acquisition （3D VISTA） images and differentiate between acquired atherosclerotic stenosis and VAH.Methods：Thirty patients with suspicious VAH by luminograms were retrospectively enrolled between January 2014 and February 2015.The patients were classified as ＂acquired atherosclerotic stenosis＂ or ＂VAH＂ based on 3D VISTA images.The wall characteristics of VAH were assessed to determine the presence of atherosclerotic lesions,and the patients were classified into two subgroups （VAH with atherosclerosis and VAH with normal wall）.Wall characteristics of basilar arteries and vertebral arteries were also assessed.The clinical and wall characteristics were compared between the two groups.Results：Five of 30 patients with suspicious VAH were finally diagnosed as acquired atherosclerotic stenosis by 3D VISTA images.25 patients were finally diagnosed as VAH including 16 （64.00%） patients with atherosclerosis and 9 （36.00%） patients with normal wall.In the 16 patients with atherosclerosis,plaque was found in 9 patients,slight wall thickening in 6 patients,and thrombus and wall thickening in 1 patient.Compared with VAH patients with normal wall,VAH patients with atherosclerosis showed atherosclerotic basilar arteries and dominant vertebral arteries more frequently （P =0.000）.Conclusions：Three-dimensional VISTA images enable differentiation between the acquired atherosclerotic stenosis and VAH.VAH was also prone to atherosclerotic processes.

A PRELIMINARY STUDY OF FOURIER SERIES ANALYSIS ON CLOUD TRACKING WITH GOES HIGH TEMPORAL RESOLUTION IMAGES

Fourier series analysis is proposed as a new technique to address the problem of“sub-pixel motion”in deriving cloud motion winds(CMW)from high temporal resolution images.Based on a concept different from that of maximum correlation matching technique,the Fourier technique computes phase speed as an estimate of cloud motion.It is very effective for tracking small cellular clouds in 1-min interval images and more efficient for computation than the maximum correlation technique because only two templates in same size are involved in primary tracking procedure. Moreover it obtains not only CMW vectors but potentially also velocity spectrum and variance.A practical example is given to show the cloud motion winds from 1-min interval images with the Fourier method versus those from traditional 30-min interval images with maximum correlation technique.Problems that require further investigation before the Fourier technique can be regarded as a viable technique,especially for cloud tracking with high temporal resolution images,are also revealed.

The Surface Rupture Zone and Coseismic Deformation Produced by the Yutian Ms7.3 Earthquake of 21 March 2008,Xinjiang

On 21 March 2008, a Ms7.3 earthquake occurred at Quickbird, Yutian County, Xinjiang. We attempt to reveal the features of the causative fault of this shock and its coseismic deformation field. Our work is based on analysis and interpretation to high-resolution satellite images as well as differential interferometric synthetic aperture radar （D-InSAR） data from the satellite Envisat SAR, coupled with seismicity, focal mechanism solutions and active tectonics in this region. The result shows that the 40 km-long, nearly NS trending surface rupture zone by this event lies on a range-front alluvial platform in Qira County. It is characterized by distinct linear traces and simple structure with 1-3-m-wide individual seams and maximum 6.5 m width of a collapse fracture. Along the rupture zone many secondary fractures and fault-bounded blocks are seen, exhibiting remarkable extension. The eoseismic deformation affected a large area 100~100 km2. D-InSAR analysis indicates that the interferometric deformation field is dominated by extensional faulting with a small strike-slip component. Along the causative fault, the western wall fell down and the eastern wall, that is the active unit, rose up, both with westerly vergence. Because of the big deformation gradients near the seismogenic fault, no interference fringes are seen on images, and what can be determined is a vertical displacement 70 cm or more between the two fault walls. According to the epicenter and differential occurrence times from the National Earthquake Information Center, China Earthquake Network Center, Harvard and USGS, it is suggested that the seismic fault ruptured from north to south.

Pre-locate net for object detection in high-resolution images

Small-object detection has long been a challenge.High-megapixel cameras are used to solve this problem in industries.However,current detectors are inefficient for high-resolution images.In this work,we propose a new module called Pre-Locate Net,which is a plug-and-play structure that can be combined with most popular detectors.We inspire the use of classification ideas to obtain candidate regions in images,greatly reducing the amount of calculation,and thus achieving rapid detection in high-resolution images.Pre-Locate Net mainly includes two parts,candidate region classification and behavior classification.Candidate region classification is used to obtain a candidate region,and behavior classification is used to estimate the scale of an object.Different follow-up processing is adopted according to different scales to balance the variance of the network input.Different from the popular candidate region generation method,we abandon the idea of regression of a bounding box and adopt the concept of classification,so as to realize the prediction of a candidate region in the shallow network.We build a high-resolution dataset of aircraft and landing gears covering complex scenes to verify the effectiveness of our method.Compared to state-of-the-art detectors(e.g.,Guided Anchoring,Libra-RCNN,and FASF),our method achieves the best m AP of 94.5 on 1920×1080 images at 16.7 FPS.

Object Extraction Based on Evolutionary Morphological Processing

This paper introduces a novel technique for object detection using genetic algorithms and morphological processing. The method employs a kind of object oriented structure element, which is derived by genetic algorithms. The population of morphological filters is iteratively evaluated according to a statistical performance index corresponding to object extraction ability, and evolves into an optimal structuring element using the evolution principles of genetic search. Experimental results of road extraction from high resolution satellite images are presented to illustrate the merit and feasibility of the proposed method.

Improving georeferencing accuracy of Very High Resolution satellite imagery using freely available ancillary data at global coverage

While impressive direct geolocation accuracies better than 5.0 m CE90(90%of circular error)can be achieved from the last DigitalGlobe’s Very High Resolution(VHR)satellites(i.e.GeoEye-1 and WorldView-1/2/3/4),it is insufficient for many precise geodetic applications.For these sensors,the best horizontal geopositioning accuracies(around 0.55 m CE90)can be attained by using third-order 3D rational functions with vendor’s rational polynomial coefficients data refined by a zero-order polynomial adjustment obtained from a small number of very accurate ground control points(GCPs).However,these high-quality GCPs are not always available.In this work,two different approaches for improving the initial direct geolocation accuracy of VHR satellite imagery are proposed.Both of them are based on the extraction of three-dimensional GCPs from freely available ancillary data at global coverage such as multi-temporal information of Google Earth and the Shuttle Radar Topography Mission 30 m digital elevation model.The application of these approaches on WorldView-2 and GeoEye-1 stereo pairs over two different study sites proved to improve the horizontal direct geolocation accuracy values around of 75%.

Reconstruction and transmission of astronomical image based on compressed sensing

In the process of image transmission, the famous JPEG and JPEG-2000 compression methods need more transmission time as it is difficult for them to compress the image with a low compression rate. Recently the compressed sensing（CS） theory was proposed, which has earned great concern as it can compress an image with a low compression rate, meanwhile the original image can be perfectly reconstructed from only a few compressed data. The CS theory is used to transmit the high resolution astronomical image and build the simulation environment where there is communication between the satellite and the Earth. Number experimental results show that the CS theory can effectively reduce the image transmission and reconstruction time. Even with a very low compression rate, it still can recover a higher quality astronomical image than JPEG and JPEG-2000 compression methods.

Identification and Mapping of Essential Fish Habitats Using Remote Sensing and GIS on Lake Victoria, Kenya

Fisheries in Lake Victoria have been threatened by declining fish stocks and diversity, environmental degradation due to increased input of pollutants, industrial and municipal waste, overfishing and use of unapproved fishing methods, infestation by aquatic weeds especially water hyacinth, de-oxygenation and a reduction in the quantity and quality of water. Remote sensing and GIS are essential tools in detection of fishing grounds which is important in providing fish sustainability for human beings and allows fishing grounds detection at minimal cost and optimizes effort. This research tends to identify the most favorable both environmentally and ecologically satisfactory factors which favor fish breeding and growth. The main aim of the study was to identify habitat variables that promote fish breeding and growth to maturity including the extraction of environmental variables from Landsat 8 images for the study period and using suitability index derived from fishery data. The study concentrated on establishing suitability ratings in different parts of Lake Victoria using lake surface temperature and chlorophyll-a levels. The study was conducted for months;January, May and December 2019 on Lake Victoria (limited by the availability of recent data). The factors were analysed and the favorable regions mapped satisfying the conditions for fish breeding. The output obtained illustrated the availability of suitable and habitable zones within the lake using satellite imagery and the suitability index. The fish catch data and satellite derived variables were used to determine habitat suitability indices for fish during January, May and December 2019. More than 90% of the total catch was found to come from the areas with sea surface temperature of 23.0˚C - 28.3˚C and chlorophyll-a concentration between 0.72 - 1.31 mg/m3. The catch data was used to validate the images. This study indicated the capability of High Satellite Resolution Imageries (HSI) as a tool to map the potential fishing grounds of fish species in Lake Victoria. The variables were affected by climatic change factors like rainfall and temperature of the lake basin and other human activities around the lake and also the species ecosystem like competition or predation.

Single-pixel imaging with neutrons

Neutron imaging is an invaluable tool for noninvasive analysis in many fields.However,neutron facilities are expensive and inconvenient to access,while portable sources are not strong enough to form even a static image within an acceptable time frame using traditional neutron imaging.Here we demonstrate a new scheme for single-pixel neutron imaging of real objects,with spatial and spectral resolutions of 100 lm and 0.4%at 1A,respectively.Low illumination down to 1000 neutron counts per frame pattern was achieved.The experimental setup is simple,inexpensive,and especially suitable for low intensity portable sources,which should greatly benefit applications in biology,material science,and industry.

Target localization method of non-cooperative spacecraft on on-orbit service

With the explosion of the number of meteoroid/orbital debris in terrestrial space in recent years, the detection environment of spacecraft becomes more complex. This phenomenon causes most current detection methods based on machine learning intractable to break through the two difficulties of solving scale transformation problem of the targets in image and accelerating detection rate of high-resolution images. To overcome the two challenges, we propose a novel noncooperative target detection method using the framework of deep convolutional neural network.Firstly, a specific spacecraft simulation dataset using over one thousand images to train and test our detection model is built. The deep separable convolution structure is applied and combined with the residual network module to improve the network’s backbone. To count the different shapes of the spacecrafts in the dataset, a particular prior-box generation method based on K-means cluster algorithm is designed for each detection head with different scales. Finally, a comprehensive loss function is presented considering category confidence, box parameters, as well as box confidence. The experimental results verify that the proposed method has strong robustness against varying degrees of luminance change, and can suppress the interference caused by Gaussian noise and background complexity. The mean accuracy precision of our proposed method reaches 93.28%, and the global loss value is 13.252. The comparative experiment results show that under the same epoch and batchsize, the speed of our method is compressed by about 20% in comparison of YOLOv3, the detection accuracy is increased by about 12%, and the size of the model is reduced by nearly 50%.