Treatment of phosphate-containing oily wastewater by coagulation and microfiltration

The oily wastewater generated from pretreatment unit of electrocoating industry contains oils, phosphate, organic solvents, and surfactants. In order to improve the removal efficiencies of phosphate and oils, to mitigate the membrane fouling, coagulation for ceramic membrane microfiltration of oily wastewater was performed. The results of filtration tests show that the membrane fouling decreased and the permeate flux and quality increased with coagulation as pretreatment. At the coagulant Ca （OH）2 dosage of 900 mg/L, the removal efficiency of phosphate was increased from 46.4% without coagulation to 99.6%; the removal of COD and oils were 97.0% and 99.8%, respectively. And the permeate flux was about 70% greater than that when Ca（OH）2 was not used. The permeate obtained from coagulation and microfiltration can be reused as make-up water, and the recommended operation conditions for pilot and industrial application are transmembrane pressure of 0.10 MPa and cross-flow velocity of 5 m/s. The comparison results show that 0.2 μm ZrO2 microfilter with coagulation could be used to perform the filtration rather than conventional ultrafilter, with very substantial gain in flux and removal efficiency of phosphate.

Life cycle assessment of high concentration organic wastewater treatment by catalytic wet air oxidation

There have been many studies on life cycle assessment in sewage treatment,but there are scarce few studies on the treatment of industrial wastewater in combination with advanced oxidation technology,especially in catalytic wet air oxidation(CWAO).There are no cases of using actual industrialized data onto life cycle assessment.This paper uses Simapro 9.0 software to establish a life cycle assessment model for the treatment of high-concentration organic wastewater by CWAO,and comprehensively explains the impact on the environment from three aspects:the construction phase,the operation phase and the demolition phase.In addition,sensitivity analysis and uncertainty analysis were performed.The results showed that the key factors affecting the environment were marine ecotoxicity,mineral resource consumption and global warming,the operation stage had the greatest impact on the environment,which was related to high power consumption during operation and emissions from the treatment process.Sensitivity analysis showed that electricity consumption has the greatest impact on abiotic depletion and freshwater aquatic ecotoxicity,and it also proved that global warming is mainly caused by pollutant emissions during operation phase.Monte Carlo simulations found slightly higher uncertainty for abiotic depletion and toxicity-related impact categories.

Experimental Study on Treatment of High-concentrated Sulfur Wastewater by Process of Depositing Natrojarosite and Its Environmental Significance

High-concentrated sulfur wastewater with sodium and COD （chemical oxygen demand） up to 26000 mg/L from a chemical plant, Jiangsu Province of China has been treated by deposition of natrojarosite in lab. The results indicated that the COD of the wastewater was decreased sharply from 26000 mg/L to 1001 mg/L, with removal rate of COD up to 96% by twice precipitations of natrojarosite and twice oxidation of H202. The treated sulfur wastewater reached the requirement of subsequent biochemical treatment to water quality. The optimal operational parameters should be controlled on pH value between 2.50 and 3.20 and 50 g FeCly6H2O solid added in per liter wastewater. The study provided an experimental basis for pretreatment of high-concentrated sulfur wastewater and proposed a new mineralogical method on treatment of other wastewaters. Depositing process of jarosite and its analogs should be able to be used to treat wastewater from mine and other industries to remove S, Fe and other toxic and harmful elements, such as As, Cr, Hg, Pb, etc. in the water.