This paper introduces a novel digital transceiver for the cordless telephone zero (CT0) standard,which uses a digital modulation and demodulation technique to handle the signal instead of the traditional analog meth...This paper introduces a novel digital transceiver for the cordless telephone zero (CT0) standard,which uses a digital modulation and demodulation technique to handle the signal instead of the traditional analog meth-od. In the transmitter,a fractional-N phase locked loop (PLL) is utilized to realize the continuous phase frequency shift key (CPFSK) modulation,and a 2 Ts raised cosine (2RC) shaping technique is used to reduce the occupied bandwidth. In the receiver,a novel digital method is proposed to demodulate the 2RC CPFSK signal. This chip is fabricated using an SMIC 0.35μm mixed signal CMOS process with a die size of 2mm × 2mm. With an external low noise amplifier (LNA),the sensitivity of the chip is better than -103dBm.展开更多
This study investigates the negative influence of an eccentric permanent-magnet(PM)design on high-frequency electromagnetic vibration in fractional-slot concentrated-winding(FSCW)PM machines.First,an analytical expres...This study investigates the negative influence of an eccentric permanent-magnet(PM)design on high-frequency electromagnetic vibration in fractional-slot concentrated-winding(FSCW)PM machines.First,an analytical expression for the sideband current harmonics was derived using the double Fourier series expansion method.Then,the characteristics of the flux-density harmonics are studied from the perspective of the space-time distribution and initial phase relationship.The influence of the eccentric PM design on high-frequency electromagnetic and concentrated forces was studied based on the electromagnetic force modulation effect.Consequently,an eccentric PM design is not conducive to reducing the 2pth-order high-frequency electromagnetic forces.Finally,two FSCW PM machines with conventional and eccentric PM designs are manufactured and tested to verify the theoretical analysis.The results show that the eccentric PM design worsens high-frequency vibrations.展开更多
This paper presents a human body communication(HBC)transceiver for wireless body network applications.The transceiver employs on frequency shift keying(FSK)modulation and op-erates in 40 MHz-60 MHz which is the resona...This paper presents a human body communication(HBC)transceiver for wireless body network applications.The transceiver employs on frequency shift keying(FSK)modulation and op-erates in 40 MHz-60 MHz which is the resonant frequency of the human body as an antenna.It achieves high performance and stability through establish passive microstrip line and via models and active device-models.The proposed transceiver is designed and fabricated by FR4 printed cir-cuit board(PCB)process,the transceiver has the ability of configurable data rate up to 2 Mbps and it achieves-86 dBm receiving sensitivity at 2 Mbps data rate.Meanwhile,the transceiver out-put power dynamics range is 34 dB.Furthermore,with a visual interaction interface,the transceiv-er can be agility use in a variety of scenarios.Its measurements are verified on human body.The result shows that the transceiver has ability to send data from person to person by relying on hu-man body antenna radiation.The transceiver shows great prospect in wireless body area networks(WBAN)for telemedicine and emergency communication.展开更多
Diamond based quantum sensing is a fast-emerging field with both scientific and technological significance.The nitrogen–vacancy(NV)center,a crystal defect in diamond,has become a unique object for microwave sensing a...Diamond based quantum sensing is a fast-emerging field with both scientific and technological significance.The nitrogen–vacancy(NV)center,a crystal defect in diamond,has become a unique object for microwave sensing applications due to its excellent stability,long spin coherence time,and optical properties at ambient condition.In this work,we use diamond NV center as atomic receiver to demodulate on–off keying(OOK)signal transmitted in broad frequency range(2 GHz–14 GHz in a portable benchtop setup).We proposed a unique algorithm of voltage discrimination and demonstrated audio signal transceiving with fidelity above 99%.This diamond receiver is attached to the end of a tapered fiber,having all optic nature,which will find important applications in data transmission tasks under extreme conditions such as strong electromagnetic interference,high temperatures,and high corrosion.展开更多
Activating Wireless Power Transfer (WPT) in Radio-Frequency (RF) to provide on-demand energy supply to widely deployed Internet of Everything devices is a key to the next-generation energy self-sustainable 6G network....Activating Wireless Power Transfer (WPT) in Radio-Frequency (RF) to provide on-demand energy supply to widely deployed Internet of Everything devices is a key to the next-generation energy self-sustainable 6G network. However, Simultaneous Wireless Information and Power Transfer (SWIPT) in the same RF bands is challenging. The majority of previous studies compared SWIPT performance to Gaussian signaling with an infinite alphabet, which is impossible to implement in any realistic communication system. In contrast, we study the SWIPT system in a well-known Nakagami-m wireless fading channel using practical modulation techniques with finite alphabet. The attainable rate-energy-reliability tradeoff and the corresponding rationale are revealed for fixed modulation schemes. Furthermore, an adaptive modulation-based transceiver is provided for further expanding the attainable rate-energy-reliability region based on various SWIPT performances of different modulation schemes. The modulation switching thresholds and transmit power allocation at the SWIPT transmitter and the power splitting ratios at the SWIPT receiver are jointly optimized to maximize the attainable spectrum efficiency of wireless information transfer while satisfying the WPT requirement and the instantaneous and average BER constraints. Numerical results demonstrate the SWIPT performance of various fixed modulation schemes in different fading conditions. The advantage of the adaptive modulation-based SWIPT transceiver is validated.展开更多
文摘This paper introduces a novel digital transceiver for the cordless telephone zero (CT0) standard,which uses a digital modulation and demodulation technique to handle the signal instead of the traditional analog meth-od. In the transmitter,a fractional-N phase locked loop (PLL) is utilized to realize the continuous phase frequency shift key (CPFSK) modulation,and a 2 Ts raised cosine (2RC) shaping technique is used to reduce the occupied bandwidth. In the receiver,a novel digital method is proposed to demodulate the 2RC CPFSK signal. This chip is fabricated using an SMIC 0.35μm mixed signal CMOS process with a die size of 2mm × 2mm. With an external low noise amplifier (LNA),the sensitivity of the chip is better than -103dBm.
基金National Natural Science Foundation of China under Projects 52377055 and 51991383.
文摘This study investigates the negative influence of an eccentric permanent-magnet(PM)design on high-frequency electromagnetic vibration in fractional-slot concentrated-winding(FSCW)PM machines.First,an analytical expression for the sideband current harmonics was derived using the double Fourier series expansion method.Then,the characteristics of the flux-density harmonics are studied from the perspective of the space-time distribution and initial phase relationship.The influence of the eccentric PM design on high-frequency electromagnetic and concentrated forces was studied based on the electromagnetic force modulation effect.Consequently,an eccentric PM design is not conducive to reducing the 2pth-order high-frequency electromagnetic forces.Finally,two FSCW PM machines with conventional and eccentric PM designs are manufactured and tested to verify the theoretical analysis.The results show that the eccentric PM design worsens high-frequency vibrations.
基金the National Key R&D Program of China(No.2018YFC2001002)the National Natural Sci-ence Foundation of China(No.62173318)+1 种基金Shenzhen Basic Research Project(No.JCYJ20180507182231907,PIFI 2020 FYB0001)CAS Key Lab of Health Informatics.
文摘This paper presents a human body communication(HBC)transceiver for wireless body network applications.The transceiver employs on frequency shift keying(FSK)modulation and op-erates in 40 MHz-60 MHz which is the resonant frequency of the human body as an antenna.It achieves high performance and stability through establish passive microstrip line and via models and active device-models.The proposed transceiver is designed and fabricated by FR4 printed cir-cuit board(PCB)process,the transceiver has the ability of configurable data rate up to 2 Mbps and it achieves-86 dBm receiving sensitivity at 2 Mbps data rate.Meanwhile,the transceiver out-put power dynamics range is 34 dB.Furthermore,with a visual interaction interface,the transceiv-er can be agility use in a variety of scenarios.Its measurements are verified on human body.The result shows that the transceiver has ability to send data from person to person by relying on hu-man body antenna radiation.The transceiver shows great prospect in wireless body area networks(WBAN)for telemedicine and emergency communication.
基金the National Key Research and Development Program of China(Grant No.2021YFB2012600)。
文摘Diamond based quantum sensing is a fast-emerging field with both scientific and technological significance.The nitrogen–vacancy(NV)center,a crystal defect in diamond,has become a unique object for microwave sensing applications due to its excellent stability,long spin coherence time,and optical properties at ambient condition.In this work,we use diamond NV center as atomic receiver to demodulate on–off keying(OOK)signal transmitted in broad frequency range(2 GHz–14 GHz in a portable benchtop setup).We proposed a unique algorithm of voltage discrimination and demonstrated audio signal transceiving with fidelity above 99%.This diamond receiver is attached to the end of a tapered fiber,having all optic nature,which will find important applications in data transmission tasks under extreme conditions such as strong electromagnetic interference,high temperatures,and high corrosion.
基金the financial support of National Natural Science Foundation of China(NSFC),Grant No.61971102,61871076the Key Research and Development Program of Zhejiang Province under Grant No.2022C01093.
文摘Activating Wireless Power Transfer (WPT) in Radio-Frequency (RF) to provide on-demand energy supply to widely deployed Internet of Everything devices is a key to the next-generation energy self-sustainable 6G network. However, Simultaneous Wireless Information and Power Transfer (SWIPT) in the same RF bands is challenging. The majority of previous studies compared SWIPT performance to Gaussian signaling with an infinite alphabet, which is impossible to implement in any realistic communication system. In contrast, we study the SWIPT system in a well-known Nakagami-m wireless fading channel using practical modulation techniques with finite alphabet. The attainable rate-energy-reliability tradeoff and the corresponding rationale are revealed for fixed modulation schemes. Furthermore, an adaptive modulation-based transceiver is provided for further expanding the attainable rate-energy-reliability region based on various SWIPT performances of different modulation schemes. The modulation switching thresholds and transmit power allocation at the SWIPT transmitter and the power splitting ratios at the SWIPT receiver are jointly optimized to maximize the attainable spectrum efficiency of wireless information transfer while satisfying the WPT requirement and the instantaneous and average BER constraints. Numerical results demonstrate the SWIPT performance of various fixed modulation schemes in different fading conditions. The advantage of the adaptive modulation-based SWIPT transceiver is validated.