High-grade pancreatic intraepithelial neoplasia diagnosed based on changes in magnetic resonance cholangiopancreatography findings:A case report

BACKGROUND High-grade pancreatic intraepithelial neoplasia(PanIN)exhibits no mass and is not detected by any examination modalities.However,it can be diagnosed by pancreatic juice cytology from indirect findings.Most previous cases were diagnosed based on findings of a focal stricture of the main pancreatic duct(MPD)and caudal MPD dilatation and subsequent pancreatic juice cytology using endoscopic retrograde cholangiopancreatography(ERCP).We experienced a case of high-grade PanIN with an unclear MPD over a 20-mm range,but without caudal MPD dilatation on magnetic resonance cholangiopancreatography(MRCP).CASE SUMMARY A 60-year-old female patient underwent computed tomography for a follow-up of uterine cancer post-excision,which revealed pancreatic cysts.MRCP revealed an unclear MPD of the pancreatic body at a 20-mm length without caudal MPD dilatation.Thus,course observation was performed.After 24 mo,MRCP revealed an increased caudal MPD caliber and a larger pancreatic cyst.We performed ERCP and detected atypical cells suspected of adenocarcinoma by serial pancreatic juice aspiration cytology examination.We performed a distal pancreatectomy and obtained a histopathological diagnosis of high-grade PanIN.Pancreatic parenchyma invasion was not observed,and curative resection was achieved.CONCLUSION High-grade Pan-IN may cause MPD narrowing in a long range without caudal MPD dilatation.

Bulk geochemistry,Rb-Sr,Sm-Nd,and stable O-H isotope systematics of the Metzimevin high-grade iron ore deposit,Mbalam iron ore district,southern Cameroon

Bulk geochemistry,Sr,Nd,and O-H isotope systematics are reported for the first time on banded iron formation(BIF)-hosted high-grade iron ore at the northwestern segment of Congo Craton(CC).Located in Mbalam iron ore district,Southern Cameroon,Metzimevin iron ore deposit is a hematite-magnetite BIF system,dominated by SiO_(2)+Fe_(2)O_(3)(97.1 to 99.84 wt%),with low concentrations of clastic elements e.g.,Al_(2)O_(3),TiO_(2),and HFSE,depicting a nearly pure chemical precipitate.The REE+Y signature of the iron deposit displays strong positive Eu anomaly,strong negative Ce anomaly,and chondritic to superchondritic Y/Ho ratios,suggestive of formation by mixed seawater-high temperature hydrothermal fluids in oxidising environment.The^(87)Sr/^(86)Sr ratios of the BIF are higher than the maximum^(87)Sr/^(86)Sr evolution curves for all Archean reservoirs(bulk silicate earth,Archean crust and Archean seawater),indicating involvement of continentally-derived components during BIF formation and alteration.TheƐ_(Nd)(t)(+2.26 to+3.77)and Nd model age indicate that chemical constituents for the BIF were derived from undifferentiated crustal source,between 3.002 and 2.88 Ga.The variable and diverse O and H isotope data(−1.9‰to 17.3‰and−57‰to 136‰respectively)indicate that the Metzimevin iron ore formed initially from magmatic plumes and later enriched by magmatic-metamorphic-modified meteoric fluids.Mass balance calculations indicate mineralisation by combined leaching and precipitation,with an average iron enrichment factor of>2.67 and SiO_(2)depletion factor of>0.99.This is associated with an overall volume reduction of 28.27%,reflecting net leaching and volume collapse of the BIF protholith.

Management of retroperitoneal high-grade serous carcinoma of unknown origin:A case report

BACKGROUND Retroperitoneal high-grade serous carcinoma(HGSC)of unknown origin is a sporadic tumor that can originate from ovarian cancer.Herein,we report the case of a woman with retroperitoneal HGSC of unknown origin and describe how she was diagnosed and treated.CASE SUMMARY A 71-year-old female presented with the tumor marker CA125 elevated to 1041.9 U/mL upon a regular health examination.Computed tomography revealed retroperitoneal lymph node enlargement.Subsequently,positron emission tomography scanning revealed lesions with increased F-18 fluorodeoxyglucose uptake at the nodes.As a result,she underwent laparoscopic lymph node resection,and pathology revealed metastatic adenocarcinoma with CK7(+),PAX8(+),WT1(+),PR(-),and p53 mutational loss of expression,indicating that the origin may be from the adnexa.The patient was admitted to our ward and underwent laparoscopic staging;however,the pathological results were negative.Under the suspicion of retroperitoneal HGSC of unknown origin,chemotherapy and targeted therapy were initiated.Tumor marker levels decreased after treatment.CONCLUSION We present a case of HGSC of unknown origin managed using retroperitoneal lymphadenectomy,staging surgery,chemotherapy,and targeted therapy.

High-grade serous carcinoma of the fallopian tube in a young woman with chromosomal 4q abnormality:A case report

BACKGROUND Few studies have reported an association between an increased risk of acquiring cancers and survival in patients with 4q deletion syndrome.This study presents a rare association between chromosome 4q abnormalities and fallopian tube highgrade serous carcinoma(HGSC)in a young woman.CASE SUMMARY A 35-year-old woman presented with acute dull abdominal pain and a known chromosomal abnormality involving 4q13.3 duplication and 4q23q24 deletion.Upon arrival at the emergency room,her abdomen appeared ovoid and distended with palpable shifting dullness.Ascites were identified through abdominal ultrasound,and computed tomography revealed an omentum cake and an enlarged bilateral adnexa.Blood tests showed elevated CA-125 levels.Paracentesis was conducted,and immunohistochemistry indicated that the cancer cells favored an ovarian origin,making us suspect ovarian cancer.The patient underwent debulking surgery,which led to a diagnosis of stage IIIC HGSC of the fallopian tube.Subsequently,the patient received adjuvant chemotherapy with carboplatin and paclitaxel,resulting in stable current condition.CONCLUSION This study demonstrates a rare correlation between a chromosome 4q abnormality and HGSC.UBE2D3 may affect crucial cancer-related pathways,including P53,BRCA,cyclin D,and tyrosine kinase receptors,thereby possibly contributing to cancer development.In addition,ADH1 and DDIT4 may be potential influencers of both carcinogenic and therapeutic responses.

Transformation of marginal zone lymphoma into high-grade B-cell lymphoma expressing terminal deoxynucleotidyl transferase:A case report

BACKGROUND High-grade B-cell lymphoma(HGBL)is an unusual malignancy that includes myelocytomatosis viral oncogene(MYC),B-cell lymphoma-2(BCL-2),and/or BCL-6 rearrangements,termed double-hit or triple-hit lymphomas,and HGBL-not otherwise specific(HGBL-NOS),which are morphologically characteristic of HGBL but lack MYC,BCL-2,or BCL-6 rearrangements.HGBL is partially transformed by follicular lymphoma and other indolent lymphoma,with few cases of marginal zone lymphoma(MZL)transformation.HGBL often has a poor prognosis and intensive therapy is currently mainly advocated,but there is no good treatment for these patients who cannot tolerate chemotherapy.CASE SUMMARY We reported a case of MZL transformed into HGBL-NOS with TP53 mutation and terminal deoxynucleotidyl transferase expression.Gene analysis revealed the gene expression profile was identical in the pre-and post-transformed tissues,suggesting that the two diseases are homologous,not secondary tumors.The chemotherapy was ineffective and the side effect was severe,so we tried combination therapy including venetoclax and obinutuzumab.The patient tolerated treatment well,and reached partial response.The patient had recurrence of hepatocellular carcinoma and died of multifunctional organ failure.He survived for 12 months after diagnosis.CONCLUSION Venetoclax combined with obinutuzumab might improve the survival in some HGBL patients,who are unsuitable for chemotherapy.

Comparison of biological behavior of lacrimal gland adenoid cystic carcinoma with high-grade transformation cells

AIM:To evaluate the differences between human lacrimal gland adenoid cystic carcinoma with high-grade transformation(LACC-HGT)primar y cells cultured by high-grade transformation tissue and non-high-grade transformation(non-HGT)primary cells cultured by non-highgrade transformation tissue in proliferation,metastasis,drug susceptibility,and genes.METHODS:LACC-HGT primary cells were established by tissue block culture,and the 4^(th)to 10^(th)generation primary cells were selected as research objects.The cells were preliminarily identified by immunofluorescent staining.The differences between non-HGT and LACC-HGT primary cells in terms of proliferation,metastasis,and drug susceptibility were compared by cell counting kit-8(CCK-8)assay,wound healing,and drug sensitivity experiments.Differentially expressed genes were screened using mRNA array.Gene expression was analyzed using real-time quantitative polymerase chain reaction(RT-qPCR).RESULTS:LACC-HGT primary cells were successfully cultured by tissue block culture.Immunofluorescence staining results showed that cytokeratin(CK)and CK7 expression levels were positive in LACC-HGT primary cells.CCK-8 results showed that the proliferation ability of LACCHGT cells was significantly higher than that of non-HGT cells.Wound healing experiment showed that the migration ability of LACC-HGT cells was significantly higher than that of non-HGT cells.LACC-HGT cells were also less sensitive to cisplatin and paclitaxel than non-HGT cells.Compared with non-HGT cells,9566 differentially expressed genes were found in LACC-HGT primary cells,of which 5162 were upregulated and 4404 were down-regulated.The expression of N-acetylneuraminate pyruvate lyase(NPL),MARVEL domain containing 3(MARVELD3),syntabulin(SYBU),and allograft inflammatory factor 1(AIF1)was higher in LACCHGT cells than in non-HGT cells,whereas that of periostin(POSTN)was lower.CONCLUSION:LACC-HGT primary cells have faster proliferation,stronger migration ability,and poorer sensitivity to chemotherapy drugs than non-HGT primary cells.The expression of mRNAs in non-HGT and LACC-HGT primary cells are significantly different.These features are speculated to be the reasons why high-grade transformation tissues exhibit higher malignant degree and poorer prognosis than their counterparts.

Development and prospects of molten steel deoxidation in steelmaking process

In the long traditional process of steelmaking,excess oxygen is blown into the converter,and alloying elements are used for deoxidation.This inevitably results in excessive deoxidation of products remaining within the steel liquid,affecting the cleanliness of the steel.With the increasing requirements for steel performance,reducing the oxygen content in the steel liquid and ensuring its high cleanliness is necessary.After more than a hundred years of development,the total oxygen content in steel has been reduced from approximately 100×10^(-6)to approximately 10×10^(-6),and it can be controlled below 5×10^(-6)in some steel grades.A relatively stable and mature deoxidation technology has been formed,but further reducing the oxygen content in steel is no longer significant for improving steel quality.Our research team developed a deoxidation technology for bearing steel by optimizing the entire conventional process.The technology combines silicon–manganese predeoxidation,ladle furnace diffusion deoxidation,and vacuum final deoxidation.We successfully conducted industrial experiments and produced interstitial-free steel with natural decarbonization predeoxidation.Non-aluminum deoxidation was found to control the oxygen content in bearing steel to between 4×10^(-6) and 8×10^(-6),altering the type of inclusions,eliminating large particle Ds-type inclusions,improving the flowability of the steel liquid,and deriving a higher fatigue life.The natural decarbonization predeoxidation of interstitial-free steel reduced aluminum consumption and production costs and significantly improved the quality of cast billets.

Development of top high-grade non-grain-oriented silicon steels at Baosteel

The development, production and application of top high-grade non-grain-oriented （NGO） silicon steels at Baosteel were introduced in this paper. Top high grades refer to the highest grades in the intemational silicon steel product standard and above. B35A230 and B50A250 were developed at Baosteel in 2009 and have been used in inverter compressors for air-conditioners, small transformers and big hydropower generators in the Three Gorges project. Small- batch production of B35A210 and B50A230, which exceed the highest grades listed in the intemational silicon steel product standard,began in 2010. That was a breakthrough in the silicon steel making history in China. Presently,Baosteel＇ s high- grade NGO products have passed the strict qualifications of the three major electric power equipment manufacturers in China and the leading international power equipment suppliers like ALSTOM, GE, SIEMENS, VESTAS, etc. These products are characterized by low iron loss, low anisotropy, good punchability and a high lamination factor. They have been used in the 770 MW hydropower generator at Xiluodu Power Station in the three gorges area, 1 000 MW thermal power generators and 2.5 MW wind power generators.

Effect of Nb on the dynamic recrystallization behavior of high-grade pipeline steels

The dynamic recrystallization （DRX） behavior of high-grade X80/X100 pipeline steels with different Nb contents was investi- gated through single pass compression experiment using a Gleeble 1500 thermomechanical simulator. By the regression of stress-sWain data obtained in the experiment, the deformation activation energy of DRX was identified, and the critical strain was calculated with the Po- liak-Jonas （P-J） method. Based on the analysis, the occurrence condition and kinetics of DRX were determined. The results show that as the Nb content increases from 0.08wt% to 0.095wt%, the activation energy of recrystallization raises from 365 to 395 kJ/mol. The critical swain of DRX can be determined more accurately by the P-J method, and the ratios of critical swain to peak sWain of XS0 and X100 pipeline steels are 0.51 and 0.49, respectively, which are similar to the results achieved by other researchers and calculated with empirical formulae.

Application of convolutional neural network-based endoscopic imaging in esophageal cancer or high-grade dysplasia: A systematic review and meta-analysis

BACKGROUND Esophageal cancer is the seventh-most common cancer type worldwide,accounting for 5%of death from malignancy.Development of novel diagnostic techniques has facilitated screening,early detection,and improved prognosis.Convolutional neural network(CNN)-based image analysis promises great potential for diagnosing and determining the prognosis of esophageal cancer,enabling even early detection of dysplasia.METHODS PubMed,EMBASE,Web of Science and Cochrane Library databases were searched for articles published up to November 30,2022.We evaluated the diagnostic accuracy of using the CNN model with still image-based analysis and with video-based analysis for esophageal cancer or HGD,as well as for the invasion depth of esophageal cancer.The pooled sensitivity,pooled specificity,positive likelihood ratio(PLR),negative likelihood ratio(NLR),diagnostic odds ratio(DOR)and area under the curve(AUC)were estimated,together with the 95%confidence intervals(CI).A bivariate method and hierarchical summary receiver operating characteristic method were used to calculate the diagnostic test accuracy of the CNN model.Meta-regression and subgroup analyses were used to identify sources of hetero-geneity.RESULTS A total of 28 studies were included in this systematic review and meta-analysis.Using still image-based analysis for the diagnosis of esophageal cancer or HGD provided a pooled sensitivity of 0.95(95%CI:0.92-0.97),pooled specificity of 0.92(0.89-0.94),PLR of 11.5(8.3-16.0),NLR of 0.06(0.04-0.09),DOR of 205(115-365),and AUC of 0.98(0.96-0.99).When video-based analysis was used,a pooled sensitivity of 0.85(0.77-0.91),pooled specificity of 0.73(0.59-0.83),PLR of 3.1(1.9-5.0),NLR of 0.20(0.12-0.34),DOR of 15(6-38)and AUC of 0.87(0.84-0.90)were found.Prediction of invasion depth resulted in a pooled sensitivity of 0.90(0.87-0.92),pooled specificity of 0.83(95%CI:0.76-0.88),PLR of 7.8(1.9-32.0),NLR of 0.10(0.41-0.25),DOR of 118(11-1305),and AUC of 0.95(0.92-0.96).CONCLUSION CNN-based image analysis in diagnosing esophageal cancer and HGD is an excellent diagnostic method with high sensitivity and specificity that merits further investigation in large,multicenter clinical trials.

Prediction model for corrosion rate of low-alloy steels under atmospheric conditions using machine learning algorithms

This work constructed a machine learning(ML)model to predict the atmospheric corrosion rate of low-alloy steels(LAS).The material properties of LAS,environmental factors,and exposure time were used as the input,while the corrosion rate as the output.6 dif-ferent ML algorithms were used to construct the proposed model.Through optimization and filtering,the eXtreme gradient boosting(XG-Boost)model exhibited good corrosion rate prediction accuracy.The features of material properties were then transformed into atomic and physical features using the proposed property transformation approach,and the dominant descriptors that affected the corrosion rate were filtered using the recursive feature elimination(RFE)as well as XGBoost methods.The established ML models exhibited better predic-tion performance and generalization ability via property transformation descriptors.In addition,the SHapley additive exPlanations(SHAP)method was applied to analyze the relationship between the descriptors and corrosion rate.The results showed that the property transformation model could effectively help with analyzing the corrosion behavior,thereby significantly improving the generalization ability of corrosion rate prediction models.

Flow characteristics and hot workability of a typical low-alloy high-strength steel during multi-pass deformation

Heavy components of low-alloy high-strength(LAHS) steels are generally formed by multi-pass forging. It is necessary to explore the flow characteristics and hot workability of LAHS steels during the multi-pass forging process, which is beneficial to the formulation of actual processing parameters. In the study, the multi-pass hot compression experiments of a typical LAHS steel are carried out at a wide range of deformation temperatures and strain rates. It is found that the work hardening rate of the experimental material depends on deformation parameters and deformation passes, which is ascribed to the impacts of static and dynamic softening behaviors. A new model is established to describe the flow characteristics at various deformation passes. Compared to the classical Arrhenius model and modified Zerilli and Armstrong model, the newly proposed model shows higher prediction accuracy with a confidence level of 0.98565. Furthermore, the connection between power dissipation efficiency(PDE) and deformation parameters is revealed by analyzing the microstructures. The PDE cannot be utilized to reflect the efficiency of energy dissipation for microstructure evolution during the entire deformation process, but only to assess the efficiency of energy dissipation for microstructure evolution in a specific deformation parameter state.As a result, an integrated processing map is proposed to better study the hot workability of the LAHS steel, which considers the effects of instability factor(IF), PDE, and distribution and size of grains. The optimized processing parameters for the multi-pass deformation process are the deformation parameters of 1223–1318 K and 0.01–0.08 s^(-1). Complete dynamic recrystallization occurs within the optimized processing parameters with an average grain size of 18.36–42.3 μm. This study will guide the optimization of the forging process of heavy components.

Effect of Cutting Techniques on the Structure and Magnetic Properties of a High-grade Non-oriented Electrical Steel

The high grade non-oriented electrical steel sheets containing 3.0%Si were manufacturing processed using different cutting techniques, then they were stress relief annealed（SRA）, the profiles and textures of the cutting edges were compared before and after annealing, and the magnetic properties of these specimens were tested and compared. The experimental results show that the iron loss of the specimen by water jet cutting is the lowest, but the magnetic induction under the low magnetic field is the highest, the iron loss of the specimen by laser cutting is the highest, but the magnetic induction under the low magnetic field is the lowest. It is necessary to adopt suitable production conditions and minimize the deterioration involved, and the magnetic property can be recovered by SRA effectively.

A Case Report: High-Grade Urothelial Carcinoma in the Renal Pelvis with Complete Kidney and Ureter Duplication Featuring Heterologous Differentiation

This report describes a considerably rare case of high-grade urothelial carcinoma of the renal pelvis and ureter,presenting with heterologous differentiation,in a patient with bilateral duplicated kidneys.A 73-year-old male experienced intermittent gross hematuria for 5 months,accompanied by lower back and abdominal pain.Ultrasound and computed tomography scans revealed bilateral renal and ureteral duplication with multiple tumors in the left renal pelvis.A total nephroterectomy and bladder cuff resection were performed on the left two nephrons.Multiple space-occupying lesions were identified in the left renal pelvis and ureter.Histopathological examination showed poorly differentiated and diverse tumor cells,manifesting as sarcomatoid carcinoma,papillary adenocarcinoma,and infiltrating high-grade urothelial carcinoma.The tumor infiltrated the subcutaneous fibrous connective tissue of the renal pelvis and the full thickness of the ureter.Given the rarity of recurrent renal urothelial carcinoma with heterogeneous differentiation,comprehensive imaging and pathological assessments are vital to delineate the nature of the lesion and the direction of tissue pathological heterologous differentiation.These evaluations guide early radical surgical interventions,improving survival rates.

Recent progress in visualization and digitization of coherent transformation structures and application in high-strength steel

High-strength steels are mainly composed of medium-or low-temperature microstructures,such as bainite or martensite,with coherent transformation characteristics.This type of microstructure has a high density of dislocations and fine crystallographic structural units,which ease the coordinated matching of high strength,toughness,and plasticity.Meanwhile,given its excellent welding perform-ance,high-strength steel has been widely used in major engineering constructions,such as pipelines,ships,and bridges.However,visual-ization and digitization of the effective units of these coherent transformation structures using traditional methods(optical microscopy and scanning electron microscopy)is difficult due to their complex morphology.Moreover,the establishment of quantitative relationships with macroscopic mechanical properties and key process parameters presents additional difficulty.This article reviews the latest progress in microstructural visualization and digitization of high-strength steel,with a focus on the application of crystallographic methods in the development of high-strength steel plates and welding.We obtained the crystallographic data(Euler angle)of the transformed microstruc-tures through electron back-scattering diffraction and combined them with the calculation of inverse transformation from bainite or martensite to austenite to determine the reconstruction of high-temperature parent austenite and orientation relationship(OR)during con-tinuous cooling transformation.Furthermore,visualization of crystallographic packets,blocks,and variants based on actual OR and digit-ization of various grain boundaries can be effectively completed to establish quantitative relationships with alloy composition and key process parameters,thereby providing reverse design guidance for the development of high-strength steel.

Mechanical Behavior and Microstructure Evolution during Tensile Deformation of Twinning Induced Plasticity Steel Processed by Warm Forgings

The mechanical behavior and microstructural evolution of an Fe-30Mn-3Al-3Si twinninginduced plasticity(TWIP)steel processed using warm forging was investigated.It is found that steel processed via warm forging improves comprehensive mechanical properties compared to the TWIP steel processed via cold rolling,with a high tensile strength(R_(m))of 793 MPa,a yield strength(R_(P))of 682 MPa,an extremely large R_(P)/R_(m)ratio as high as 0.86 as well as an excellent elongation rate of 46.8%.The microstructure observation demonstrates that steel processed by warm forging consists of large and elongated grains together with fine,equiaxed grains.Complicated micro-defect configurations were also observed within the steel,including dense dislocation networks and a few coarse deformation twins.As the plastic deformation proceeds,the densities of dislocations and deformation twins significantly increase.Moreover,a great number of slip lines could be observed in the elongated grains.These findings reveal that a much more dramatic interaction between microstructural defect and dislocations glide takes place in the forging sample,wherein the fine and equiaxed grains propagated dislocations more rapidly,together with initial defect configurations,are responsible for enhanced strength properties.Meanwhile,larger,elongated grains with more prevalently activated deformation twins result in high plasticity.

Corrosion Test of the Steel Plate in a WJ-8 Fastener for High Speed Rail

It was found that the steel plate in the composite plate in the WJ-8 fastener used in high speed rail is rusty. The objective of this study is to test the zinc coating of the steel plate. A literature review was conducted to identify the zinc coating techniques, and the companies that can provide different coating service was identified. A salt fog chamber was built that was in compliance with the ANSI B117 code, and the steel plates that were coated by the identified companies were tested using the salt fog chamber. The results indicated that the coating technique that had the best performance in preventing corrosion was the Greenkote plates with passivation. The galvanized option had the roughest coating layer, and it was the most reactive in the salt water solution. This makes it non-ideal for the dynamic rail environment because the increased friction of the plate could damage the supports, especially during extreme temperatures that would cause the rail to expand or contract. Greenkote with Phosphate and ArmorGalv also provided increased corrosion prevention with a smooth, strong finish, but it had more rust on the surface area than the Greenkote with ELU passivation. The ArmorGalv sample had more rust on the surface area than the Greenkote samples. This may not be a weakness in the ArmorGalv process;rather, it likely was the result of this particular sample not having the added protection of a colored coating.

Critical precipitation behavior of MnTe inclusions in resulfurized steels during solidification

Te treatment is an effective method for modifying sulfide inclusions,and MnTe precipitation has an important effect on thermal brittleness and steel corrosion resistance.In most actual industrial applications of Te treatment,MnTe precipitation is unexpected.The critical precipitation behavior of MnTe inclusions was investigated through scanning electron microscopy,transmission electron microscopy,machine learning,and first-principles calculation.MnTe preferentially precipitated at the container mouth for sphere-like sulfides and at the interface between MnS grain boundaries and steel matrix for rod-like sulfides.The MnS/MnTe interface was semicoherent.A composition transition zone with a rock-salt structure exhibiting periodic changes existed to maintain the semicoherent interface.The critical precipitation behavior of MnTe inclusions in resulfurized steels involved three stages at varying temperatures.First,Mn(S,Te)precipitated during solidification.Second,MnTe with a rock-salt structure precipitated from Mn(S,Te).Third,MnTe with a hexagonal NiAs structure transformed from the rock-salt structure.The solubility of Te in MnS decreased with decreasing temperature.The critical precipitation behavior of MnTe inclusions in resulfurized steels was related to the MnS precipitation temperature.With the increase in MnS precipitation temperature,the critical Te/S weight ratio decreased.In consideration of the cost-effectiveness of Te addition for industrial production,the Te content in resulfurized steels should be controlled in accordance with MnS precipitation temperature and S content.

Effect of Mn addition on microstructure and mechanical properties of GX40CrNiSi25-12 austenitic heat resistant steel

Three types of steels were designed on the basis of GX40CrNiSi25-12 austenitic heat resistant steel by adding different Mn contents(2wt.%,6wt.%,and 12wt.%).Thermodynamic calculation,microstructure characterization and mechanical property tests were conducted to investigate the effect of Mn addition on the microstructure and mechanical properties of the austenitic heat resistant steel.Results show that the matrix structure in all the three types of steels at room temperature is completely austenite.Carbides NbC and M_(23)C_(6)precipitate at grain boundaries of austenite matrix.With the increase of Mn content,the number of carbides increases and their distribution becomes more uniform.With the Mn content increases from 1.99%to 12.06%,the ultimate tensile strength,yield strength and elongation increase by 14.6%,8.0%and 46.3%,respectively.The improvement of the mechanical properties of austenitic steels can be explained by utilizing classic theories of alloy strengthening,including solid solution strengthening,precipitation strengthening,and grain refinement.The increase in alloy strength can be attributed to solid solution strengthening and precipitation strengthening caused by the addition of Mn.The improvement of the plasticity of austenitic steels can be explained from two aspects:grain refinement and homogenization of precipitated phases.

Effects of iron oxide on crystallization behavior and spatial distribution of spinel in stainless steel slag

Chromium plays a vital role in stainless steel due to its ability to improve the corrosion resistance of the latter.However,the re-lease of chromium from stainless steel slag(SSS)during SSS stockpiling causes detrimental environmental issues.To prevent chromium pollution,the effects of iron oxide on crystallization behavior and spatial distribution of spinel were investigated in this work.The results revealed that FeO was more conducive to the growth of spinels compared with Fe2O3 and Fe3O4.Spinels were found to be mainly distrib-uted at the top and bottom of slag.The amount of spinel phase at the bottom decreased with the increasing FeO content,while that at the top increased.The average particle size of spinel in the slag with 18wt%FeO content was 12.8μm.Meanwhile,no notable structural changes were observed with a further increase in FeO content.In other words,the spatial distribution of spinel changed when the content of iron oxide varied in the range of 8wt%to 18wt%.Finally,less spinel was found at the bottom of slag with a FeO content of 23wt%.