High- and Ultrahigh-pressure Metamorphism and Retrogressive Textures of Gneiss in the Donghai Area——Evidence from gneisses in drillhole ZK2304

In the gneisses from the drillhole ZK2304 of the Donghai area, there have been preserved high- and ultrahigh-pressure metamorphic mineral assemblages, a series of complicated retrogressive textures and relevant metamorphic reactions. In addition to garnet, jadeititic-clinopyroxene and rutile, other peak stage (M2) minerals in some gneisses include phengite, aragonite and coesite or quartz pseudomorphs after coesite. The typical peak-stage mineral assemblages in gneisses are characterized by garnet + jadeitic-clinopyroxene + rutile + coesite, garnet + jadeitic-clinopyroxene + phengite + rutile ± coesite and garnet + jadeitic-clinopyroxene + aragonite + rutile ± coesite. The grossular content (Gro) in garnet is high and may reach 50. 1 mol%. The SiO2 content of phengite ranges from 54.37% to 54.84% with 3.54-3.57 p.f.u. Quartz pseudomorphs after coesite occur as inclusions in garnet.The gneisses of the Donghai area have been subjected to multistage recrystallization and exhibit a closewise P-T evolutional path characterized by the near-isothermal decompression. The inclusion assemblage (Hb+Ep+Bi+Pl+Qz) within garnet and other minerals has recorded a pre-peak stage (Mi) epidote amphibole fades metamorphic event. High- and ultrahigh-pressure peak metamorphism (M2) took place at T=750-860℃ and P>2.7 GPa. The symplectitic assemblages after garnet, jadeitic-clinopyroxene and rutile imply a near-isothermal decompression metamorphism (M3, M4) during the rapid exhumation. Several lines of evidence of petrography and metamorphic reactions indicate that both gneisses and eclogites have experienced ultrahigh-pressure metamorphism in the Donghai area. This research may be of great significance for an in-depth study of the metamorphism and tectonic evolution in the Su-Lu ultrahigh-pressure metamorphic belt.

Permo-Triassic high-pressure metamorphism in the central western Korean Peninsula, and its link to Paleo-Tethyan Ocean closure: Key issues revisited

Permo-Triassic high-pressure(HP) mafic granulites, together with the Bibong retrogressed eclogite,preserved along the central western Korean Peninsula provide important insights into the Late Permian to Triassic collisional orogeny in northeast Asia. The metamorphic pressureetemperatureetime(P-T-t)paths of these rocks, however, remain poorly constrained and even overestimated, owing to outdated geothermobarometers and inaccurate isopleth techniques. Here we evaluate the metamorphic Pe T conditions of Triassic HP mafic granulites including those in Baekdong, Sinri and Daepan and the Bibong Triassic retrogressed eclogite in the Hongseong area, and the Permo-Triassic Samgot mafic granulite in the Imjingang Belt of the central western Korean Peninsula through the application of modern phase equilibria techniques. The Baekdong and Samgot mafic granulites and the Bibong retrogressed eclogite yield a range of 12.0 -16.0 kbar and 800 -900℃, representing HP granulite facies conditions. The Sinri and Daepan granulites from the Hongseong area show relatively lower grade metamorphic conditions between HP granulite and normal granulite facies, and are characterized by sub-isothermal decompression during exhumation. The similarities in the metamorphic ages and the post-collisional igneous activity from the central western Korean Peninsula indicate that the Triassic ages represent the retrograde stage of the metamorphic Pe T paths. In contrast, the Late Permian metamorphic ages, which are older than protolith ages of the post-collisional igneous rocks, correspond to the possible prograde stage of metamorphism. The P-T-t paths presented in this paper, together with the metamorphic ages and post-orogenic igneous events reported from these areas suggest trace of the subduction, accretion and exhumation history, and indicate a tectonic linkage among the northeast Asian continents during the Paleo-Tethyan Ocean closure.

On Continent-Continent Point-Collision and Ultrahigh-Pressure Metamorphism

Up to now it is known that almost all ultrahigh-pressure (UHP) metamorphism of non-impact origin occurred in continent-continent collisional orogenic belt, as has been evidenced by many outcrops in the eastern hemisphere. UHP metamorphic rocks are represented by coesite- and diamond-bearing eclogites and eclogite facies metamorphic rocks formed at 650-800℃ and 2.6-3.5 GPa, and most of the protoliths of UHP rocks are volcanic-sedimentary sequences of continental crust. From these it may be deduced that deep subduction of continental crust may have occurred. However, UHP rocks are exposed on the surface or occur near the surface now, which implies that they have been exhumed from great depths. The mechanism of deep subduction of continental crust and subsequent exhumation has been a hot topic of the research on continental dynamics, but there are divergent views. The focus of the dispute is how deep continental crust is subducted so that UHP rocks can be formed and what mechanism causes it to be subducted to great depths and again exhumed to the shallow surface. Through an analysis of the continental process and mechanical boundary conditions of the Dabie collisional belt-an UHP metamorphic belt where the largest area of UHP rocks in the world is exposed, this paper discusses the variations of viscous stresses and average pressure in the viscous fluid caused by tectonism with rock physical properties and the contribution of the tectonic stresses to production of UHP. Calculation indicates that the anomalous stress state on the irregular boundary of a continental block may give rise to stress concentration and accumulation at local places (where the compressional stress may be 5-9 times higher than those in their surroundings). The tectonic stresses may account for 20-35% of the total UHP. So we may infer that the HP (nigh-pressure)-UHP rocks in the Dabie Mountains were formed at depths of 60-80 km. Thus the authors propose a new genetic model of UHP rocks-the point-collision model. This model conforms to the basic principles of the mechanics and also to the geologic records and process in the Dabie orogenic belt. It can explain why UHP rocks do nol exist along the entire length of the collisional orogen but occur in some particular positions. The authors also propose that the eastern and western corners of the Himalaya collision zone are typical point-collision areas and that almost all UHP metamorphism of continental crustal rocks occurred in the two particular positions.

Influence of introducing Zr,Ti,Nb and Ce elements on externally solidified crystals and mechanical properties of high-pressure die-casting Al–Si alloy

High pressure die casting(HPDC)AlSi10Mn Mg alloy castings are widely used in the automobile industry.Mg can optimize the mechanical properties of castings through heat treatment,while the release of thermal stress arouses the deformation of large integrated die-castings.Herein,the development of non-heat treatment Al alloys is becoming the hot topic.In addition,HPDC contains externally solidified crystals(ESCs),which are detrimental to the mechanical properties of castings.To achieve high strength and toughness of non-heat treatment die-casting Al-Si alloy,we used AlSi9Mn alloy as matrix with the introduction of Zr,Ti,Nb,and Ce.Their influences on ESCs and mechanical properties were systematically investigated through three-dimensional reconstruction and thermodynamic simulation.Our results reveal that the addition of Ti increased ESCs'size and porosity,while the introduction of Nb refined ESCs and decreased porosity.Meanwhile,large-sized Al_3(Zr,Ti)phases formed and degraded the mechanical properties.Subsequent introduction of Ce resulted in the poisoning effect and reduced mechanical properties.

Extensional deformation of post ultrahigh-pressure metamorphism and exhumation process of ultrahigh-pressure metamorphic rocks in the Dabie massif,China

A detailed tectonic analysis demonstrates that the present observed regional tectonic configuration of the ultrahigh-pressure metamorphic terrane in the Dabie massif was mainly formed by the extension processes of the post-Indosinian continent-continent oblique collision between the Sino-Korean and Yangtze cratons and ultrahigh-pressure metamorphism (UHPM). The configuration is characterized by a regional tectonic pattern similar to metamorphic core complexes and by the development of multi-layered detachment zones. On the basis of the identification of compressional and extensional fabrics, it is indicated that the exhumation and uplift of ultrahigh-pressure (UHP) metamorphic rocks from the mantle depth to the surface can be divided into at least three different decompression retrogressive metamorphism and tectonic deformation stages, in which the subhorizontal crustal-scale extensional flow in the middle-lower crust under amphibolite facies conditions is an important geodynamic process in the exhumation of UHP metamorphic rocks. Moreover, the extensional flow is probably driven by delamination and magmatic underplating of thickened lithospheric mantle following the continental oblique collision.

Protolith ages and timing of peak and retrograde metamorphism of the high-pressure granulites in the Shandong Peninsula,eastern North China Craton

High-pressure （HP） granulites widely occur as enclaves within tonalite-trondhjemite- granodiorite （TTG） gneisses of the Early Precambrian metamorphic basement in the Shandong Peninsula, southeast part of the North China Craton （NCC）. Based on cathodoluminescence （CL）, laser Raman spec- troscopy and in-situ U-Pb dating, we characterize the zircons from the HP granulites and group them into three main types： inherited （magmatic） zircon, HP metamorphic zircon and retrograde zircon. The inher- ited zircons with clear or weakly defined magmatic zoning contain inclusions of apatites, and 207pb/206pb ages of 2915--2890 Ma and 2763--2510 Ma, correlating with two magmatic events in the Archaean base- ment. The homogeneous HP metamorphic zircons contain index minerals of high-pressure metamor- phism including garnet, clinopyroxene, plagioclase, quartz, rutile and apatite, and yield 207pb/2066pb ages between 1900 and 1850 Ma, marking the timing of peak HP granulite facies metamorphism. The retrograde zircons contain inclusions of orthopyroxene, plagioclase, quartz, apatite and amphibole, and yield the youngest 207pb/206pb ages of 1840-1820 Ma among the three groups, which we correlate to the medium to low-pressure granulite facies retrograde metamorphism. The data presented in this study suggest subduction of Meso- and Neoarchean magmatic protoliths to lower crust depths where they were subjected to HP granulite facies metamorphism during Palaeoproterozoic （1900-1850 Ma）. Subse- quently, the HP granulites were exhumated to upper crust levels, and were ovel-printed by medium to low-pressure granulite and amphibolite facies retrograde event at ca. 1840--820 Ma.

A perspective view on ultrahigh-pressure metamorphism and continental collision in the Dabie-Sulu orogenic belt

The study of continental deep-subduction has been one of the forefront and core subjects to advance the plate tectonics theory in the twenty-first century. The Dabie-Sulu orogenic belt in China crops out the largest lithotectonic unit containing ultrahigh-pressure metamorphic rocks in the world. Much of our understanding of the world's most enigmatic processes in continental deep-subduction zones has been deduced from various records in the Dabie-Sulu rocks. By taking these rocks as the natural laboratory, earth scientists have made seminal contributions to understanding of ultrahigh-pressure metamorphism and continental collision. This paper outlines twelve aspects of outstanding progress, including spatial distribution of the UHP metamorphic rocks, timing of the UHP metamorphism, timescale of the UHP metamorphism, the protolith nature of deeply subducted continental crust, subduction erosion and crustal detachment during continental collision, the possible depths of continental subduction, fluid activity in the continental deep-subduction zone, partial melting during continental collision, element mobility in continental deep-subduction zone, recycling of subducted continental crust, geodynamic mechanism of postcollisional magmatism, and lithospheric architecture of collision orogen. Some intriguing questions and directions are also proposed for future studies.

The Metamorphism of High-Pressure Basic Granulite in Laixi District, East Shandong, China

A high pressure basic granulite ultramafics belt is found in the late Archaean gneisses of Laixi Laiyang Qixia district, east Shandong. This belt has previously been considered as another eclogite belt in Sulu ultra high pressure(UHP) terrain. The typical high P granulite is characterized by mineral assemblages of three generations formed in different metamorphic episode respectively. The mineral assemblage of first episode is Grt(core)+Cpx+Pl, that of the second episode is Grt(rim)+Cpx+Opx+Pl+Amp+Q+Mt and that of the third episode is Cpx+Pl+Amp+Q+Mt. In first assemblage, the garnet porphyroblast is rich in grossular and pyrope component, and the coexisting Cpx is Al rich. Using mineral thermobarometer and Berman’s (1991) TWQ program, the P T conditions of three episodes are established, i.e. T=840℃～860℃, P>1.4GPa for first episode; T=720℃～780℃,P=0.8～1.2GPa for second episode and T=600℃～800℃,P=0.5～0.7GPa for the third episode.Considering the reaction texture, mineral Chemistry and PT estmations, a clockwise PTt path can be constructed, which shows post peak isothermal decompression at first and followed by a process of pressure and temperature decreasing. The mineral wholerock Sm Nd isochron age of the granulite is 1752Ma, which indicates its last thermal event during early middle Proterozoic stage. Therefore, it is concluded that the high pressure granulite and ultramafics of this belt represents the lower continental curst of the North China Craton during early Precambrian without any relationship to tectonic process of the Sulu UHP terrain.

Partial melting of ultrahigh-pressure metamorphic rocks at convergent continental margins: Evidences, melt compositions and physical effects

Ultrahigh-pressure（UHP） metamorphic rocks are distinctive products of crustal deep subduction,and are mainly exposed in continental subduction-collision terranes. UHP slices of continental crust are usually involved in multistage exhumation and partial melting, which has obvious influence on the rheological features of the rocks, and thus significantly affect the dynamic behavior of subducted slices. Moreover,partial melting of UHP rocks have significant influence on element mobility and related isotope behavior within continental subduction zones, which is in turn crucial to chemical differentiation of the continental crust and to crust-mantle interaction.Partial melting can occur before, during or after the peak metamorphism of UHP rocks. Post-peak decompression melting has been better constrained by remelting experiments; however, because of multiple stages of decompression, retrogression and deformation, evidence of former melts in UHP rocks is often erased. Field evidence is among the most reliable criteria to infer partial melting. Glass and nanogranitoid inclusions are generally considered conclusive petrographic evidence. The residual assemblages after melt extraction are also significant to indicate partial melting in some cases. Besides field and petrographic evidence, bulk-rock and zircon trace-element geochemical features are also effective tools for recognizing partial melting of UHP rocks. Phase equilibrium modeling is an important petrological tool that is becoming more and more popular in P-T estimation of the evolution of metamorphic rocks; by taking into account the activity model of silicate melt, it can predict when partial melting occurred if the P-T path of a given rock is provided.UHP silicate melt is commonly leucogranitic and peraluminous in composition with high SiO_2,low MgO, FeO, MnO, TiO_2 and CaO, and variable K_2 O and Na_2 O contents. Mineralogy of nanogranites found in UHP rocks mainly consists of plagioclase ＋ K-feldspar ＋ quartz, plagioclase being commonly albite-rich.Trace element pattern of the melt is characterized by significant enrichment of large ion lithophile elements（LILE）, depletion of heavy rare earth elements（HREE） and high field strength elements（HFSE）,indicating garnet and rutile stability in the residual assemblage. In eclogites, significant Mg-isotope fractionation occurs between garnet and phengite; therefore, Mg isotopes may become an effective indicator for partial melting of eclogites.

Retrogressive Microstructures: A Key to Post-Collisional Uplift and Extension Tectonics of Ultrahigh-Pressure Metamorphic Rocks from Dabie Orogenic Belt, China

A wealth of retrogressive microstructures have been discovered from the UHP metamorphic rocks in Dabie orogenic belt, namely, the ultrahigh-pressure (URP) eclogites, jadeite quartzites and kyanite-zoisite-quartz vein. The most important are pseudomorphic replacements of UHP minerals like coesite, the corona reaction textures iuduced by solid-solid reactions as well as the corona and symplectites induced by reactions involving fluid. According to the textural relationships the sequence of mineral Paragenesis and the metamorphic stages in the UHP eclogites can be delineated; the mineral geobarothermometry of the various stages of retrograde metamorphism is studied and a clockwise, nearly isothermal decompressive metamorphic PT-trajectory for the UHP eclogites can be reconstructed. In terms of the PT-trajectory the two stage post collision uplirt and exhumation processes are reflected. When the UHP metumorphic rocks extruded to the lower-middle crust partial melting happened which bad in turn caused tke crustal extension and the further exhumation or the UHP metomorphic rocks. Based on the field strain analysis combined with geochronological data a scenario or post collision uplift aud exhumation model is presented.

Geochemical Characteristics of Pb Isotope of High-Pressure Metamorphic Rocks and Foliated Granites from HP Unit of Tongbai-Dabie Orogenic Belt

Whole-rock Pb isotopic compositions of the high-pressure (HP) metamorphic rocks, consisting of two-mica albite gneisses and eclogites, and foliated granites from the HP metamorphic unit of the Tongbai-Dabie orogenic belt are firstly reported in this paper. The results show that the HP metamorphic rocks in different parts of this orogenic belt have similar Pb isotopic compositions. The two- mica albite gneisses have 206 Pb/ 204 Pb=17.657-18.168, 207 Pb/ 204 Pb=15.318-15.573, 208 Pb/ 204 Pb=38.315-38.990, and the eclogites have 206 Pb/ 204 Pb=17.599-18.310, 207 Pb/ 204 Pb=15.465- 15.615 , 208 Pb/ 204 Pb=37.968-39.143. The HP metamorphic rocks are characterized by upper crustal Pb isotopic composition. Although the Pb isotopic composition of the HP metamorphic rocks partly overlaps that of the ultrahigh-pressure (UHP) metamorphic rocks, as a whole, the former is higher than the latter. The high radiogenic Pb isotopic composition for the HP metamorphic rocks confirms that the subducted Yangtze continental crust in the Tongbai-Dabie orogenic belt has the chemical structure of increasing radiogenic Pb isotopic composition from lower crust to upper crust. The foliated granites, intruded in the HP metamorphic rocks post the HP/UHP metamorphism, have 206 Pb/ 204 Pb=17.128-17.434, 207 Pb/ 204 Pb=15.313-15.422 and 208 Pb/ 204 Pb=37.631-38.122, which are obviously different from the Pb isotopic compositions of the HP metamorphic rocks but similar to those of the UHP metamorphic rocks and the foliated garnet-bearing granites in the UHP unit. This shows that the foliated granites from the HP and UHP units have common magma source. Combined with the foliated granites having the geochemical characteristics of A-type granites, it is suggested that the magma for the foliated granites in the UHP and HP unit would be derived from the partial melting of the retrometamorphosed UHP metamorphic rocks exhumed into middle to lower crust, and partial magmas were intruded into the HP unit.

Subduction of Continental Crust in the Early Palaeozoic North Qaidam Ultrahigh-Pressure Metamorphic Belt, NW China:Evidence from the Discovery of Coesite in the Belt

Coesite was discovered as inclusions in zircon separates from pelitic gneissassociated with a large eclogite body in the North Qaidam ultrahigh-pressure (UHP) terrane. Somegraphite inclusions were also found. This finding suggested the occurrence of in-situ UHPmetamorphism and that the terrane was most likely recrystallized at pressures below the diamondstability field. It supported other previous indirect UHP evidence, such as polycrystalline quartzinclusions in eclogitic garnet, quartz lamellae in omphacite and P-T estimates for both eclogite andgarnet peridotite. The U-Pb and Sm-Nd ages of the North Qaidam eclogite indicated that subductionof continental crust occurred in the Early Palaeozoic, which probably recorded a collision betweenthe Sino-Korean and Yangtze plates.

Fluid Activity and Tectonic Evolution in the Northern Qilian High-pressure Metamorphic Belt

The Northern Qilian high-pressure metamorphic belt has experienced multipledeformation-metamorphism, which consists of at least four stages. In 550.8-526 Ma, eclogites wereformed. High temperature and pressure caused the escape of a large quantity of gas-liquid fluidsfrom rocks while silicate melt was generated. In the late stage, small amounts of CO_2 and H_2Oinfiltrating along fractures were introduced. In the formation of glaucophane schist (447-362 Ma),devolatilization reactions were dominated during the subduction-uplift stage of the paleoplate. Inthe uplift-exhumation stage (400-380 Ma) the increase of internal space of fractures in the rocksfavoured fluid infiltration and concentration. These fluids participated in hydration reactions inthe retro-metamorphism. The fluids participating in the mineral reactions have the compositions ofCaCl_2-NaCl-H_2O. In subsequent thrusting (<380 Ma), the metamorphic terrain was uplifted to theshallower crust and ductile-shearing deformation took place, which caused mainly dehydrationreactions of minerals. In a near-surface environment the metamorphic terrain experienced brittledeformation, forming many accompanying fractures. Immiscible CO_2 and low-salinity aqueous fluidsoccurred in these secondary microfractures and were trapped and sealed. The thermodynamic conditionsof different deformation-metamorphic stages of the metamorphic terrain were calculated and thecorresponding P-T-t path was deduced, showing that the metamorphic terrain has experienced aclockwise path indicated by T- and P-rising, and T- and P-falling processes. This reveals that thesubduction zone has undergone multiple tectono-dynamic processes, i.e. initial deep burial,subsequent quick uplift and near-surface tectonism.

^(40)Ar/^(39)Ar Dating of Deformation Events and Reconstruction of Exhumation of Ultrahigh-Pressure Metamorphic Rocks in Donghai, East China

Recent investigations reveal that the ultrahigh-pressure metamorphic (UHPM) rocks in the Donghai region of East China underwent ductile and transitional ductile-brittle structural events during their exhumation. The earlier ductile deformation took place under the condition of amphibolite facies and the later transitional ductile-brittle deformation under the condition of greenschist facies. The hanging walls moved southeastward during both of these two events. The 40Ar/39Ar dating of muscovites from muscovite-plagioclase schists in the Haizhou phosphorous mine, which are structurally overlain by UHPM rocks, yields a plateau age of 218.0±2.9 Ma and isochron age of 219.8Ma, indicating that the earlier event of the ampibolite-facies deformation probably took place about 220 Ma ago. The 40Ar/39Ar dating of oriented amphiboles parallel to the movement direction of the hanging wall on a decollement plane yields a plateau age of 213.1±0.3 Ma and isochron age of 213.4±4.1 Ma, probably representing the age of the later event. The dating of pegmatitic biotites and K-feldspars near the decollement plane from the eastern Fangshan area yield plateau ages of 203.4±0.3 Ma, 203.6±0.4 Ma and 204.8±2.2 Ma, and isochron ages of 204.0±2.0 Ma, 200.6±3.1 Ma and 204.0±5.0 Ma, respectively, implying that the rocks in the studied area had not been cooled down to closing temperature of the dated biotites and K-feldspars until the beginning of the Jurassic (about 204 Ma). The integration of these data with previous chronological ages on the ultrahigh-pressure metamorphism lead to a new inference on the exhumation of the UHPM rocks. The UHPM rocks in the area were exhumed at the rate of 3-4 km/Ma from the mantle (about 80-100 km below the earth's surface at about 240 Ma) to the lower crust (at the depth of about 20-30km at 220 Ma), and at the rate of 1-2 km/Ma to the middle crust (at the depth of about 15 km at 213 Ma), and then at the rate of less than 1 km/Ma to the upper crust about 10 km deep at about 204 Ma.

Partial Melting Processes During Exhumation of Ultrahigh-Pressure Metamorphic Rocks in Dabieshan, China

Study practice has proved that the ultrahigh pressure metamorphic rocks iu Dabieshan must have exPerienced botk the retrograde metumorphism and partial melting under decompression and amphibolite-facies conditions during their exhumation from mantel depth to lower-middle crust.The retrometamorphism and partial melting of the ultrahigh pressure rocks in association with thermal state changing in the middle-lower crust, under amphibolite-facies conditions, are important physical and chemical processes. It would result in a great detrease in the integrated yield strength, and the enhancement of the de formabilitY or the rocks, promoting the transition from contractional (collision) to extensional defoemational regime. The statement of tbe retrometamorphism and partial melting of the ultrahigh pressure rocks has proved the in-site model for the ultrahigh pressure rocks in Dabieshan. It not only clarifies the evolutiou from the UHP eclogite to the surrounding gneissic rock (so called UHP gueiss) and to the garnet-beariug roliated granites (non-UHP country rocks), but also provides scientific arguments for the establiskment of the dynamic model of the exhumation of UHP metamorphic rocks in Dabiesban. In general, Purely conductive heat transfer from the crust itself is probably insurficient to produce temperature conditions for partial melting, and additional heat sources must have been present during partial melting. We infer that the partial melting and extensional flow are probably driveu by delamination and magmatic underplating of thickeued lithospkeric mantle following the continental oblique collision.

The Lanshantou Kyanite-bearing Eclogite with Coesite Inclusions in the Sulu Ultrahigh-Pressure Metamorphic Belt and Its PTt Path

Coesite inclusions are found in kyanite from the Lanshantou eclogite in the Sulu ultrahigh-pressure (UHP) metamorphic belt. This discovery extends the stable region of kyanite to over 2.4 GPa. As an important UHP metamorphic belt in China, the Sulu eclogite belt is the product of A-subduction induced by strong compression of the Yellow Sea terrane to the Jiaodong-northereastern Jiangsu terrane during the interaction of the Eurasian plate and Palaeo-Pacific plate in the Indosinian. It stretches about 350 km and contains over 1000 eclogite bodies. Most eclogites in this belt belong to Groups B and C in the classification of Coleman et al., and commonly contain kyanite, while the Lanshantou eclogite belongs to Group A and contains coesite. The MgO, CaO and FeO contents in garnet and pyroxene show regular variation from the core to the rim, which reveals the PTt paths of progressive metamorphism during the Early Mesozoic (240-200 Ma) and retrogressive metamorphism during the Late Mesozoic and Cenozoic exhumation.

Metamorphic gradient modification in the Early Cretaceous Northern Andes subduction zone:A record from thermally overprinted high-pressure rocks

New field observations and petrological data from Early Cretaceous metamorphic rocks in the Central Cordillera of the Colombian Andes allowed the recognition of thermally overprinted high-pressure rocks derived from oceanic crust protoliths.The obtained metamorphic path suggests that the rocks evolved from blueschist to eclogite facies towards upper amphibolite to high-pressure granulite facies transitional conditions.Eclogite facies conditions,better recorded in mafic protoliths,are revealed by relic lawsonite and phengite,bleb-to worm-like diopside-albite symplectites,as well as garnet core composition.Upper amphibolite to high pressure granulite facies overprinting is supported by coarse-grained brown-colored Ti-rich amphibole,augite,and oligoclase recrystallization,as well as the record of partial melting leucosomes.Phase equilibria and pressure-temperature(P-T)path modeling suggest initial high-pressure metamorphic conditions M1 yielding 18.2-24.5 kbar and 465-580℃,followed by upper amphibolite to high pressure granulite facies overprinting stage M2 yielding 6.5-14.2 kbar and 580-720℃.Retrograde conditions M3 obtained through chlorite thermometry yield temperatures ranging around 286-400℃at pressures below 6.5-11 kbar.The obtained clockwise P-T path,the garnet zonation pattern revealing a decrease in X_(grs)/X_(prp)related to Mg#increment from core to rim,the presence of partial melting veins,as well as regional constraints,document the modification of the thermal structure of the active subduction zone in Northern Andes during the Early Cretaceous.Such increment of the metamorphic gradient within the subduction interface is associated with slab roll-back geodynamics where hot mantle inflow was triggered.This scenario is also argued by the reported trench-ward magmatic arc migration and multiple extensional basin formation during this period.The presented example constitutes the first report of Cretaceous roll-back-related metamorphism in the Caribbean and Andean realms,representing an additional piece of evidence for a margin-scale extensional event that modified the northwestern border of South America during the Early Cretaceous.

Nano-scale Reinforcements and Properties of Al-Si-Cu Alloy Processed by High-Pressure Torsion

To improve the comprehensive mechanical properties of Al-Si-Cu alloy,it was treated by a high-pressure torsion process,and the effect of the deformation degree on the microstructure and properties of the Al-Si-Cu alloy was studied.The results show that the reinforcements(β-Si andθ-CuAl_(2)phases)of the Al-Si-Cu alloy are dispersed in theα-Al matrix phase with finer phase size after the treatment.The processed samples exhibit grain sizes in the submicron or even nanometer range,which effectively improves the mechanical properties of the material.The hardness and strength of the deformed alloy are both significantly raised to 268 HV and 390.04 MPa by 10 turns HPT process,and the fracture morphology shows that the material gradually transits from brittle to plastic before and after deformation.The elements interdiffusion at the interface between the phases has also been effectively enhanced.In addition,it is found that the severe plastic deformation at room temperature induces a ternary eutectic reaction,resulting in the formation of ternary Al+Si+CuAl_(2)eutectic.

Experimental and Finite Element Analysis of Corroded High-Pressure Pipeline Repaired by Laminated Composite

Repairs of corroded high-pressure pipelines are essential for fluids transportation under high pressure.One of the methods used in their repairs is the use of layered composites.The composite used must have the necessary strength.Therefore,the experiments and analytical solutions presented in this paper are performed according to the relevant standards and codes,including ASME PCC-2,ASME B31.8S,ASME B31.4,ISO 24817 and ASME B31.G.In addition,the experimental tests are replicated numerically using the finite element method.Setting the strain gauges at different distances from the defect location,can reduce the nonlinear effects,deformation,and fluctuations due to the high pressure.The direct relationship between the depth of an axial defect and the stress concentration is observed at the inner side edges of the defect.Composite reparation reduces the non-linearities related to the sharp variation of the geometry and a more reliable numerical simulation could be performed.

CO_(2)high-pressure miscible flooding and storage technology and its application in Shengli Oilfield,China

There are various issues for CO_(2)flooding and storage in Shengli Oilfield,which are characterized by low light hydrocarbon content of oil and high miscible pressure,strong reservoir heterogeneity and low sweep efficiency,gas channeling and difficult whole-process control.Through laboratory experiments,technical research and field practice,the theory and technology of CO_(2)high pressure miscible flooding and storage are established.By increasing the formation pressure to 1.2 times the minimum miscible pressure,the miscibility of the medium-heavy components can be improved,the production percentage of oil in small pores can be increased,the displacing front developed evenly,and the swept volume expanded.Rapid high-pressure miscibility is realized through advanced pressure flooding and energy replenishment,and technologies of cascade water-alternating-gas(WAG),injection and production coupling and multistage chemical plugging are used for dynamic control of flow resistance,so as to obtain the optimum of oil recovery and CO_(2)storage factor.The research results have been applied to the Gao89-Fan142 in carbon capture,utilization and storage(CCUS)demonstration site,where the daily oil production of the block has increased from 254.6 t to 358.2 t,and the recovery degree is expected to increase by 11.6 percentage points in 15 years,providing theoretical and technical support for the large-scale development of CCUS.