In view of class imbalance in data-driven modeling for Prognostics and Health Management(PHM),existing classification methods may fail in generating effective fault prediction models for the on-board high-speed train ...In view of class imbalance in data-driven modeling for Prognostics and Health Management(PHM),existing classification methods may fail in generating effective fault prediction models for the on-board high-speed train control equipment.A virtual sample generation solution based on Generative Adversarial Network(GAN)is proposed to overcome this shortcoming.Aiming at augmenting the sample classes with the imbalanced data problem,the GAN-based virtual sample generation strategy is embedded into the establishment of fault prediction models.Under the PHM framework of the on-board train control system,the virtual sample generation principle and the detailed procedures are presented.With the enhanced class-balancing mechanism and the designed sample augmentation logic,the PHM scheme of the on-board train control equipment has powerful data condition adaptability and can effectively predict the fault probability and life cycle status.Practical data from a specific type of on-board train control system is employed for the validation of the presented solution.The comparative results indicate that GAN-based sample augmentation is capable of achieving a desirable sample balancing level and enhancing the performance of correspondingly derived fault prediction models for the Condition-based Maintenance(CBM)operations.展开更多
Adopting a principle of “check_accept for the first rank,inspection for the second rank”,this paper briefly discusses the rationale of the sampling inspection and the sampling inspection schemes to digital products ...Adopting a principle of “check_accept for the first rank,inspection for the second rank”,this paper briefly discusses the rationale of the sampling inspection and the sampling inspection schemes to digital products in GIS.The OC curve is drawn to explain the deficiency of the percent sampling inspection.Meanwhile,the method of One Time Limiting Quality of count selection is presented as the inspection scheme for production departments while the method of One Time After_inspection Mean Percent Defective Upper Limit of count selection is for acceptance departments.展开更多
Background:Digital hemispherical photography(DHP)is widely used to estimate the leaf area index(LAI)of forest plots due to its advantages of high efficiency and low cost.A crucial step in the LAI estimation of forest ...Background:Digital hemispherical photography(DHP)is widely used to estimate the leaf area index(LAI)of forest plots due to its advantages of high efficiency and low cost.A crucial step in the LAI estimation of forest plots via DHP is choosing a sampling scheme.However,various sampling schemes involving DHP have been used for the LAI estimation of forest plots.To date,the impact of sampling schemes on LAI estimation from DHP has not been comprehensively investigated.Methods:In this study,13 commonly used sampling schemes which belong to five sampling types(i.e.dispersed,square,cross,transect and circle)were adopted in the LAI estimation of five Larix principis-rupprechtii plots(25m×25 m).An additional sampling scheme(with a sample size of 89)was generated on the basis of all the sample points of the 13 sampling schemes.Three typical inversion models and four canopy element clumping index(Ωe)algorithms were involved in the LAI estimation.The impacts of the sampling schemes on four variables,including gap fraction,Ωe,effective plant area index(PAIe)and LAI estimation from DHP were analysed.The LAI estimates obtained with different sampling schemes were then compared with those obtained from litter collection measurements.Results:Large differences were observed for all four variable estimates(i.e.gap fraction,Ωe,PAIe and LAI)under different sampling schemes.The differences in impact of sampling schemes on LAI estimation were not obvious for the three inversion models,if the fourΩe algorithms,except for the traditional gap-size analysis algorithm were adopted in the estimation.The accuracy of LAI estimation was not always improved with an increase in sample size.Moreover,results indicated that with the appropriate inversion model,Ωe algorithm and sampling scheme,the maximum estimation error of DHP-estimated LAI at elementary sampling unit can be less than 20%,which is required by the global climate observing system,except in forest plots with extremely large LAI values(~>6.0).However,obtaining an LAI from DHP with an estimation error lower than 5%is impossible regardless of which combination of inversion model,Ωe algorithm and sampling scheme is used.Conclusion:The LAI estimation of L.principis-rupprechtii forests from DHP was largely affected by the sampling schemes adopted in the estimation.Thus,the sampling scheme should be seriously considered in the LAI estimation.One square and two transect sampling schemes(with sample sizes ranging from 3 to 9)were recommended to be used to estimate the LAI of L.principis-rupprechtii forests with the smallest mean relative error(MRE).By contrast,three cross and one dispersed sampling schemes were identified to provide LAI estimates with relatively large MREs.展开更多
The aerodynamic optimization design of high-speed trains(HSTs)is crucial for energy conservation,environmental preservation,operational safety,and speeding up.This study aims to review the current state and progress o...The aerodynamic optimization design of high-speed trains(HSTs)is crucial for energy conservation,environmental preservation,operational safety,and speeding up.This study aims to review the current state and progress of the aerodynamic multi-objective optimization of HSTs.First,the study explores the impact of train nose shape parameters on aerodynamic performance.The parameterization methods involved in the aerodynamic multiobjective optimization ofHSTs are summarized and classified as shape-based and disturbance-based parameterizationmethods.Meanwhile,the advantages and limitations of each parameterizationmethod,aswell as the applicable scope,are briefly discussed.In addition,the NSGA-II algorithm,particle swarm optimization algorithm,standard genetic algorithm,and other commonly used multi-objective optimization algorithms and the improvements in the field of aerodynamic optimization for HSTs are summarized.Second,this study investigates the aerodynamic multi-objective optimization technology for HSTs using the surrogate model,focusing on the Kriging surrogate models,neural network,and support vector regression.Moreover,the construction methods of surrogate models are summarized,and the influence of different sample infill criteria on the efficiency ofmulti-objective optimization is analyzed.Meanwhile,advanced aerodynamic optimization methods in the field of aircraft have been briefly introduced to guide research on the aerodynamic optimization of HSTs.Finally,based on the summary of the research progress of the aerodynamicmulti-objective optimization ofHSTs,future research directions are proposed,such as intelligent recognition technology of characteristic parameters,collaborative optimization of multiple operating environments,and sample infill criterion of the surrogate model.展开更多
The identification of anomalies within stream sediment geochemical data is one of the fastest developing areas in mineral exploration.The various means used to achieve this objective make use of either continuous or d...The identification of anomalies within stream sediment geochemical data is one of the fastest developing areas in mineral exploration.The various means used to achieve this objective make use of either continuous or discrete field models of stream sediment geochemical data.To map anomalies in a discrete field model of such data,two corrections are required:background correction and downstream dilution correction.Topography and geomorphology are important factors in variations of element content in stream sediments.However,few studies have considered,through the use of digital terrain analysis,the influence of geomorphic features in downstream dilution correction of stream sediment geochemical data.This study proposes and demonstrates an improvement to the traditional downstream dilution correction equation,based on the use of digital terrain analysis to map single-element anomalies in stream sediment geochemical landscapes.Moreover,this study compares the results of analyses using discrete and continuous field models of stream sediment geochemical data from the Xincang area,Tibet.The efficiency of the proposed methodology was validated against known mineral occurrences.The results indicate that catchment-based analysis outperforms interpolation-based analysis of stream sediment geochemical data for anomaly mapping.Meanwhile,the proposed modified downstream dilution correction equation proved more effective than the original equation.However,further testing of this modified downstream dilution correction is needed in other areas,in order to investigate its efficiency further.展开更多
Fault diagnosis of 5G networks faces the challenges of heavy reliance on human experience and insufficient fault samples and relevant monitoring data.The digital twin technology can realize the interaction between vir...Fault diagnosis of 5G networks faces the challenges of heavy reliance on human experience and insufficient fault samples and relevant monitoring data.The digital twin technology can realize the interaction between virtual space and physical space through the fusion of model and data,providing a new paradigm for fault diagnosis.In this paper,we first propose a network digital twin model and apply it to 5G network diagnosis.We then use an improved Average Wasserstein GAN with Gradient Penalty(AWGAN-GP)method to discover and predict failures in the twin network.Finally,we use XGBoost algorithm to locate the faults in physical network in real time.Extensive simulation results show that the proposed approach can significantly increase fault prediction and diagnosis accuracy in the case of a small number of labeled failure samples in 5G networks.展开更多
This paper aims to discuss how to effectively suppress intersymbol interference by optimizing the filter design, so as to achieve a distortion-free output effect, and effectively compensate the transmission characteri...This paper aims to discuss how to effectively suppress intersymbol interference by optimizing the filter design, so as to achieve a distortion-free output effect, and effectively compensate the transmission characteristics of the baseband transmission system in a non-ideal channel environment, so as to minimize the impact of intersymbol crosser. The simulation experiment model of digital optimal baseband transmission and the overall structure of the system are designed based on the Matlab simulation platform, and the parameters of each module in the simulation experiment model are set. The working process and performance of the digital optimal baseband transmission system are simulated, and the conditions and performance of the digital optimal baseband transmission system are verified according to the simulation results.展开更多
The deep mining of coal resources is accompanied by severe environmental challenges and various potential engineering hazards.The implementation of NPR(negative Poisson's ratio)bolts are capable of controlling lar...The deep mining of coal resources is accompanied by severe environmental challenges and various potential engineering hazards.The implementation of NPR(negative Poisson's ratio)bolts are capable of controlling large deformations in the surrounding rock effectively.This paper focuses on studying the mechanical properties of the NPR bolt under static disturbance load.The deep nonlinear mechanical experimental system was used to study the mechanical behavior of rock samples with different anchored types(unanchored/PR anchored/2G NPR anchored)under static disturbance load.The whole process of rock samples was taken by high-speed camera to obtain the real-time failure characteristics under static disturbance load.At the same time,the acoustic emission signal was collected to obtain the key characteristic parameters of acoustic emission such as acoustic emission count,energy,and frequency.The deformation at the failure of the samples was calculated and analyzed by digital speckle software.The findings indicate that the failure mode of rock is influenced by different types of anchoring.The peak failure strength of 2G NPR bolt anchored rock samples exhibits an increase of 6.5%when compared to the unanchored rock samples.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 62.16%and 62.90%,respectively.The maximum deformation of bearing capacity exhibits an increase of 59.27%,while the failure time demonstrates a delay of 42.86%.The peak failure strength of the 2G NPR bolt anchored ones under static disturbance load exhibits an increase of 5.94%when compared to the rock anchored by PR(Poisson's ratio)bolt.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 47.16%and 43.86%,respectively.The maximum deformation of the bearing capacity exhibits an increase of 50.43%,and the failure time demonstrates a delay of 32%.After anchoring by 2G NPR bolt,anchoring support effectively reduces the risk of damage caused by static disturbance load.These results demonstrate that the support effect of 2G NPR bolt materials surpasses that of PR bolt.展开更多
Multirate digital control system is a periodically time-variant (PTV) system in its essence. It bas many' super capability', such as obtaining arbitrarily-large gain- margin, simultaneous stabilization, strong...Multirate digital control system is a periodically time-variant (PTV) system in its essence. It bas many' super capability', such as obtaining arbitrarily-large gain- margin, simultaneous stabilization, strong stabilization, decentralized control, etc. Utilizing freedom aroused from the multirate sampling of system output, this paper assigns poles of the closedloop system robustly, and so improves the resistance of the system to perturbation.展开更多
The National Bureau of Surveying and Mapping of China has planned to speed up the development of spatial data infrastructure (SDI) in the coming few years.This SDI consists of four types of digital products,i.e.,digit...The National Bureau of Surveying and Mapping of China has planned to speed up the development of spatial data infrastructure (SDI) in the coming few years.This SDI consists of four types of digital products,i.e.,digital orthophotos,digital elevation models, digital line graphs and digital raster graphs.For the DEM,a scheme for the database building and updating of 1∶10 000 digital elevation models has been proposed and some experimental tests have also been accomplished.This paper describes the theoretical (and/or technical) background and reports some of the experimental results to support the scheme.Various aspects of the scheme such as accuracy,data sources,data sampling,spatial resolution,terrain modeling,data organization,etc are discussed.展开更多
In order to solve the cross-channel signal problem caused by the uniform channelized wideband digital receiver when processing wideband signal and the problem that the sensitivity of the system greatly decreases when ...In order to solve the cross-channel signal problem caused by the uniform channelized wideband digital receiver when processing wideband signal and the problem that the sensitivity of the system greatly decreases when the bandwidth of wideband digital receiver increases,which both decrease the wideband radar signal detection performance,a new wideband digital receiver based on the modulated wideband converter(MWC)discrete compressed sampling structure and an energy detection method based on the new receiver are proposed.Firstly,the proposed receiver utilizes periodic pseudo-random sequences to mix wideband signals with baseband and other sub-bands.Then the mixed signals are low-pass filtered and downsampled to obtain the baseband compressed sampling data,which can increase the sensitivity of the system.Meanwhile,the cross-channel signal will all appear in any subbands,so the cross-channel signal problem can be solved easily by processing the baseband compressed sampling data.Secondly,we establish the signal detection model and formulate the criterion of the energy detection method.And we directly utilize the baseband compressed sampling data to carry out signal detection without signal reconstruction,which decreases the complexity of the algorithm and reduces the computational burden.Finally,simulation experiments demonstrate the effectiveness of the proposed receiver and show that the proposed signal detection method is effective in low signal-to-noise ratio(SNR)compared with the conventional energy detection and the probability of detection increases significantly when SNR increases.展开更多
An approach is proposed to realize a digital channelized receiver in the fractional Fourier domain (FRFD) for signal intercept applications. The presented architecture can be considered as a generalization of that i...An approach is proposed to realize a digital channelized receiver in the fractional Fourier domain (FRFD) for signal intercept applications. The presented architecture can be considered as a generalization of that in the traditional Fourier domain. Since the linear frequency modulation (LFM) signal has a good energy concentration in the FRFD, by choosing an appropriate fractional Fourier transform (FRFT) order, the presented architecture can concentrate the broadband LFM signal into only one sub-channel and that will prevent it from crossing several sub-channels. Thus the performance of the signal detection and parameter estimation after the sub-channel output will be improved significantly. The computational complexity is reduced enormously due to the implementation of the polyphase filter bank decomposition, thus the proposed architecture can be realized as efficiently as in the Fourier domain. The related simulation results are presented to verify the validity of the theories and methods involved in this paper.展开更多
In radio receivers,complete implementation of the software defined radio(SDR) concept is mainly limited by frontend.Based on bandpass sampling(BPS) theory,a flexible digital frontend(DFE) platform for SDR receiver is ...In radio receivers,complete implementation of the software defined radio(SDR) concept is mainly limited by frontend.Based on bandpass sampling(BPS) theory,a flexible digital frontend(DFE) platform for SDR receiver is designed.In order to increase the processing speed,Gigabit Ethernet was applied in the platform at speed of 5×10~8 bit/s.By appropriate design of interpolant according to the position of input RF signals,multi-band receiving can be realized in the platform with suppression more than 35 d B without changing hardware.展开更多
With the widespread application of the computer and microelectronic technology in the industry,digitization becomes the inevitable developing trend of the hydraulic technology.Digitization of the hydraulic components ...With the widespread application of the computer and microelectronic technology in the industry,digitization becomes the inevitable developing trend of the hydraulic technology.Digitization of the hydraulic components is critical in the digital hydraulic technology.High-speed on-of valves(HSVs)which convert a train of input pulses into the fast and accurate switching between the on and of states belong to widely used basic digital hydraulic elements.In some ways,the characteristics of the HSVs determine the performance of the digital hydraulic systems.This paper discusses the development of HSVs and their applications.First,the HSVs with innovative structures which is classifed into direct drive valves and pilot operated valves are discussed,with the emphasis on their performance.Then,an overview of HSVs with intelligent materials is presented with considering of the switching frequency and fow capacity.Finally,the applications of the HSVs are reviewed,including digital hydraulic components with the integration of the HSVs and digital hydraulic systems controlled by the HSVs.展开更多
Digital to analog converters(DAC)play an important role as a bridge connecting the analog world and the digital world.With the rapid development of wireless communication,wideband digital radar,and other emerging tech...Digital to analog converters(DAC)play an important role as a bridge connecting the analog world and the digital world.With the rapid development of wireless communication,wideband digital radar,and other emerging technologies,better performing high-speed high-resolution DACs are required.In those applications,signal bandwidth and high-frequency linearity often limited by data converters are the bottleneck of the system.This article reviews the state-of-the-art technologies of high-speed and high-resolution DACs reported in recent years.Comparisons are made between different architectures,circuit implementations and calibration techniques along with the figure of merit(FoM)results.展开更多
To reduce the charge-coupled device(CCD)readout noise and improve the detection ability under low illumination and dim targets,a new low-noise CCD signal processing technology-CCD digital denoiseis gradually being emp...To reduce the charge-coupled device(CCD)readout noise and improve the detection ability under low illumination and dim targets,a new low-noise CCD signal processing technology-CCD digital denoiseis gradually being employed in aerospace detection and other fields.In this study,the main readout noise of CCD detectors and its characteristics are analyzed.A CCD digital denoise system and an experimental platform are designed as well as established by using a PCIe data acquisition card.According to the characteristics of readout noise,some digital filters are analyzed and designed based on distributed kernel coefficient,and the optimal kernel coefficients are obtained through iteration.Then,CCD signal and filter model are established,and the optimal filter is designed to apply to the digital denoise system.Finally,according to the image data obtained from the system,the performance of the digital denoise system and digital filtering algorithm is evaluated and compared.At 500 kHz and 1 MHz CCD readout rates,the denoising performance of the optimal filter designed in the experiment is 16%-32%higher than that of the digital filter with kernel distribution coefficient,and 50%-60%higher than that of the traditional correlated double sampling technology.展开更多
Based on the recently proposed mirror-assisted multi-view digital image correlation(MV-DIC),we establish a cost-effective and easy-to-implement mirror-assisted multi-view high-speed digital image correlation(MVHS-DIC)...Based on the recently proposed mirror-assisted multi-view digital image correlation(MV-DIC),we establish a cost-effective and easy-to-implement mirror-assisted multi-view high-speed digital image correlation(MVHS-DIC)method and explore its applications for dual-surface full-field dynamic deformation measurement.In contrast to the general requirement of four expensive high-speed cameras for dual-surface dynamic deformation field measurement,the established mirror-assisted MVHS-DIC halves the cost by involving only two synchronized high-speed cameras and two planar mirrors.The two synchronized high-speed cameras can dynamically measure the front and rear surfaces of a sheet sample simultaneously through the reflection of the two mirrors.The results on the two surfaces are then transformed into the same coordinate system,leading to the required dual-surface 3D dynamical deformation fields.The effectiveness and accuracy of the established system are validated through modal tests of a cantilever aluminum sheet.The vibration measurement of a drum and dual-surface transient deformation measurement of a smartphone in the drop-collision process further prove its practicability.Benefiting from the attractive advantages of multi-view dynamic deformation measurement in a cost-efficient way,the established mirror-assisted MVHS-DIC is expected to encourage more comprehensive dynamic mechanical behavior characterization of regular-sized materials and structures in vibration and impact engineering fields.展开更多
Digital Holography (DH) has brought a new impetus to the field of holography. The fields of imaging, microscopy and metrology have all benefited from these developments. In this paper some of these developments will b...Digital Holography (DH) has brought a new impetus to the field of holography. The fields of imaging, microscopy and metrology have all benefited from these developments. In this paper some of these developments will be described with some applications in the fields of color imaging, amplitude and phase microscopy and dynamic metrology. It is envisaged that this field will rapidly advance in the next couple of years and become an expected imaging and measurement modality especially in the field of micro, nano and bio sciences.展开更多
基金supported by National Natural Science Foundation of China(U2268206,T2222015)Beijing Natural Science Foundation(4232031)+1 种基金Key Fields Project of DEGP(2021ZDZX1110)Shenzhen Science and Technology Program(CJGJZD20220517141801004).
文摘In view of class imbalance in data-driven modeling for Prognostics and Health Management(PHM),existing classification methods may fail in generating effective fault prediction models for the on-board high-speed train control equipment.A virtual sample generation solution based on Generative Adversarial Network(GAN)is proposed to overcome this shortcoming.Aiming at augmenting the sample classes with the imbalanced data problem,the GAN-based virtual sample generation strategy is embedded into the establishment of fault prediction models.Under the PHM framework of the on-board train control system,the virtual sample generation principle and the detailed procedures are presented.With the enhanced class-balancing mechanism and the designed sample augmentation logic,the PHM scheme of the on-board train control equipment has powerful data condition adaptability and can effectively predict the fault probability and life cycle status.Practical data from a specific type of on-board train control system is employed for the validation of the presented solution.The comparative results indicate that GAN-based sample augmentation is capable of achieving a desirable sample balancing level and enhancing the performance of correspondingly derived fault prediction models for the Condition-based Maintenance(CBM)operations.
文摘Adopting a principle of “check_accept for the first rank,inspection for the second rank”,this paper briefly discusses the rationale of the sampling inspection and the sampling inspection schemes to digital products in GIS.The OC curve is drawn to explain the deficiency of the percent sampling inspection.Meanwhile,the method of One Time Limiting Quality of count selection is presented as the inspection scheme for production departments while the method of One Time After_inspection Mean Percent Defective Upper Limit of count selection is for acceptance departments.
基金the National Science Foundation of China(Grant Nos.41871233,41371330 , 41001203).
文摘Background:Digital hemispherical photography(DHP)is widely used to estimate the leaf area index(LAI)of forest plots due to its advantages of high efficiency and low cost.A crucial step in the LAI estimation of forest plots via DHP is choosing a sampling scheme.However,various sampling schemes involving DHP have been used for the LAI estimation of forest plots.To date,the impact of sampling schemes on LAI estimation from DHP has not been comprehensively investigated.Methods:In this study,13 commonly used sampling schemes which belong to five sampling types(i.e.dispersed,square,cross,transect and circle)were adopted in the LAI estimation of five Larix principis-rupprechtii plots(25m×25 m).An additional sampling scheme(with a sample size of 89)was generated on the basis of all the sample points of the 13 sampling schemes.Three typical inversion models and four canopy element clumping index(Ωe)algorithms were involved in the LAI estimation.The impacts of the sampling schemes on four variables,including gap fraction,Ωe,effective plant area index(PAIe)and LAI estimation from DHP were analysed.The LAI estimates obtained with different sampling schemes were then compared with those obtained from litter collection measurements.Results:Large differences were observed for all four variable estimates(i.e.gap fraction,Ωe,PAIe and LAI)under different sampling schemes.The differences in impact of sampling schemes on LAI estimation were not obvious for the three inversion models,if the fourΩe algorithms,except for the traditional gap-size analysis algorithm were adopted in the estimation.The accuracy of LAI estimation was not always improved with an increase in sample size.Moreover,results indicated that with the appropriate inversion model,Ωe algorithm and sampling scheme,the maximum estimation error of DHP-estimated LAI at elementary sampling unit can be less than 20%,which is required by the global climate observing system,except in forest plots with extremely large LAI values(~>6.0).However,obtaining an LAI from DHP with an estimation error lower than 5%is impossible regardless of which combination of inversion model,Ωe algorithm and sampling scheme is used.Conclusion:The LAI estimation of L.principis-rupprechtii forests from DHP was largely affected by the sampling schemes adopted in the estimation.Thus,the sampling scheme should be seriously considered in the LAI estimation.One square and two transect sampling schemes(with sample sizes ranging from 3 to 9)were recommended to be used to estimate the LAI of L.principis-rupprechtii forests with the smallest mean relative error(MRE).By contrast,three cross and one dispersed sampling schemes were identified to provide LAI estimates with relatively large MREs.
基金supported by the Sichuan Science and Technology Program(2023JDRC0062)National Natural Science Foundation of China(12172308)Project of State Key Laboratory of Traction Power(2023TPL-T05).
文摘The aerodynamic optimization design of high-speed trains(HSTs)is crucial for energy conservation,environmental preservation,operational safety,and speeding up.This study aims to review the current state and progress of the aerodynamic multi-objective optimization of HSTs.First,the study explores the impact of train nose shape parameters on aerodynamic performance.The parameterization methods involved in the aerodynamic multiobjective optimization ofHSTs are summarized and classified as shape-based and disturbance-based parameterizationmethods.Meanwhile,the advantages and limitations of each parameterizationmethod,aswell as the applicable scope,are briefly discussed.In addition,the NSGA-II algorithm,particle swarm optimization algorithm,standard genetic algorithm,and other commonly used multi-objective optimization algorithms and the improvements in the field of aerodynamic optimization for HSTs are summarized.Second,this study investigates the aerodynamic multi-objective optimization technology for HSTs using the surrogate model,focusing on the Kriging surrogate models,neural network,and support vector regression.Moreover,the construction methods of surrogate models are summarized,and the influence of different sample infill criteria on the efficiency ofmulti-objective optimization is analyzed.Meanwhile,advanced aerodynamic optimization methods in the field of aircraft have been briefly introduced to guide research on the aerodynamic optimization of HSTs.Finally,based on the summary of the research progress of the aerodynamicmulti-objective optimization ofHSTs,future research directions are proposed,such as intelligent recognition technology of characteristic parameters,collaborative optimization of multiple operating environments,and sample infill criterion of the surrogate model.
基金financially supported by the National Natural Science Foundation of China(NNSFC,Project No.42002298)the Chinese Geological Survey(Project Nos.DD20201181,DD20211403)+1 种基金the National Key Research and Development Program of China(NKRDPC,Project No.2017YFC0601501)funded by The Project of"Big Data Analysis and Major Project Evaluation of Strategic Mineral Resources"from the Chinese Geological Survey。
文摘The identification of anomalies within stream sediment geochemical data is one of the fastest developing areas in mineral exploration.The various means used to achieve this objective make use of either continuous or discrete field models of stream sediment geochemical data.To map anomalies in a discrete field model of such data,two corrections are required:background correction and downstream dilution correction.Topography and geomorphology are important factors in variations of element content in stream sediments.However,few studies have considered,through the use of digital terrain analysis,the influence of geomorphic features in downstream dilution correction of stream sediment geochemical data.This study proposes and demonstrates an improvement to the traditional downstream dilution correction equation,based on the use of digital terrain analysis to map single-element anomalies in stream sediment geochemical landscapes.Moreover,this study compares the results of analyses using discrete and continuous field models of stream sediment geochemical data from the Xincang area,Tibet.The efficiency of the proposed methodology was validated against known mineral occurrences.The results indicate that catchment-based analysis outperforms interpolation-based analysis of stream sediment geochemical data for anomaly mapping.Meanwhile,the proposed modified downstream dilution correction equation proved more effective than the original equation.However,further testing of this modified downstream dilution correction is needed in other areas,in order to investigate its efficiency further.
基金supported by Natural Science Foundation of China(61871237,92067101)Program to Cultivate Middle-aged and Young Science Leaders of Universities of Jiangsu Province+1 种基金Key R&D plan of Jiangsu Province(BE2021013-3)。
文摘Fault diagnosis of 5G networks faces the challenges of heavy reliance on human experience and insufficient fault samples and relevant monitoring data.The digital twin technology can realize the interaction between virtual space and physical space through the fusion of model and data,providing a new paradigm for fault diagnosis.In this paper,we first propose a network digital twin model and apply it to 5G network diagnosis.We then use an improved Average Wasserstein GAN with Gradient Penalty(AWGAN-GP)method to discover and predict failures in the twin network.Finally,we use XGBoost algorithm to locate the faults in physical network in real time.Extensive simulation results show that the proposed approach can significantly increase fault prediction and diagnosis accuracy in the case of a small number of labeled failure samples in 5G networks.
文摘This paper aims to discuss how to effectively suppress intersymbol interference by optimizing the filter design, so as to achieve a distortion-free output effect, and effectively compensate the transmission characteristics of the baseband transmission system in a non-ideal channel environment, so as to minimize the impact of intersymbol crosser. The simulation experiment model of digital optimal baseband transmission and the overall structure of the system are designed based on the Matlab simulation platform, and the parameters of each module in the simulation experiment model are set. The working process and performance of the digital optimal baseband transmission system are simulated, and the conditions and performance of the digital optimal baseband transmission system are verified according to the simulation results.
基金provided by the National Natural Science Foundation of China(52074300)the Program of China Scholarship Council(202206430024)+2 种基金the National Natural Science Foundation of China Youth Science(52104139)Yueqi Young Scholars Project of China University of Mining and Technology Beijing(2602021RC84)Guizhou province science and technology planning project([2020]3007,[2020]3008)。
文摘The deep mining of coal resources is accompanied by severe environmental challenges and various potential engineering hazards.The implementation of NPR(negative Poisson's ratio)bolts are capable of controlling large deformations in the surrounding rock effectively.This paper focuses on studying the mechanical properties of the NPR bolt under static disturbance load.The deep nonlinear mechanical experimental system was used to study the mechanical behavior of rock samples with different anchored types(unanchored/PR anchored/2G NPR anchored)under static disturbance load.The whole process of rock samples was taken by high-speed camera to obtain the real-time failure characteristics under static disturbance load.At the same time,the acoustic emission signal was collected to obtain the key characteristic parameters of acoustic emission such as acoustic emission count,energy,and frequency.The deformation at the failure of the samples was calculated and analyzed by digital speckle software.The findings indicate that the failure mode of rock is influenced by different types of anchoring.The peak failure strength of 2G NPR bolt anchored rock samples exhibits an increase of 6.5%when compared to the unanchored rock samples.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 62.16%and 62.90%,respectively.The maximum deformation of bearing capacity exhibits an increase of 59.27%,while the failure time demonstrates a delay of 42.86%.The peak failure strength of the 2G NPR bolt anchored ones under static disturbance load exhibits an increase of 5.94%when compared to the rock anchored by PR(Poisson's ratio)bolt.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 47.16%and 43.86%,respectively.The maximum deformation of the bearing capacity exhibits an increase of 50.43%,and the failure time demonstrates a delay of 32%.After anchoring by 2G NPR bolt,anchoring support effectively reduces the risk of damage caused by static disturbance load.These results demonstrate that the support effect of 2G NPR bolt materials surpasses that of PR bolt.
基金Supported by the National Natural Science Foundation of China(No. 69774024 )
文摘Multirate digital control system is a periodically time-variant (PTV) system in its essence. It bas many' super capability', such as obtaining arbitrarily-large gain- margin, simultaneous stabilization, strong stabilization, decentralized control, etc. Utilizing freedom aroused from the multirate sampling of system output, this paper assigns poles of the closedloop system robustly, and so improves the resistance of the system to perturbation.
文摘The National Bureau of Surveying and Mapping of China has planned to speed up the development of spatial data infrastructure (SDI) in the coming few years.This SDI consists of four types of digital products,i.e.,digital orthophotos,digital elevation models, digital line graphs and digital raster graphs.For the DEM,a scheme for the database building and updating of 1∶10 000 digital elevation models has been proposed and some experimental tests have also been accomplished.This paper describes the theoretical (and/or technical) background and reports some of the experimental results to support the scheme.Various aspects of the scheme such as accuracy,data sources,data sampling,spatial resolution,terrain modeling,data organization,etc are discussed.
基金supported by the National Natural Science Foundation of China(No.61571146)the Fundamental Research Funds for the Central Universities(HEUCF1608)
文摘In order to solve the cross-channel signal problem caused by the uniform channelized wideband digital receiver when processing wideband signal and the problem that the sensitivity of the system greatly decreases when the bandwidth of wideband digital receiver increases,which both decrease the wideband radar signal detection performance,a new wideband digital receiver based on the modulated wideband converter(MWC)discrete compressed sampling structure and an energy detection method based on the new receiver are proposed.Firstly,the proposed receiver utilizes periodic pseudo-random sequences to mix wideband signals with baseband and other sub-bands.Then the mixed signals are low-pass filtered and downsampled to obtain the baseband compressed sampling data,which can increase the sensitivity of the system.Meanwhile,the cross-channel signal will all appear in any subbands,so the cross-channel signal problem can be solved easily by processing the baseband compressed sampling data.Secondly,we establish the signal detection model and formulate the criterion of the energy detection method.And we directly utilize the baseband compressed sampling data to carry out signal detection without signal reconstruction,which decreases the complexity of the algorithm and reduces the computational burden.Finally,simulation experiments demonstrate the effectiveness of the proposed receiver and show that the proposed signal detection method is effective in low signal-to-noise ratio(SNR)compared with the conventional energy detection and the probability of detection increases significantly when SNR increases.
基金supported by the Program for New Century Excellent Talents in University(NCET-06-0921)
文摘An approach is proposed to realize a digital channelized receiver in the fractional Fourier domain (FRFD) for signal intercept applications. The presented architecture can be considered as a generalization of that in the traditional Fourier domain. Since the linear frequency modulation (LFM) signal has a good energy concentration in the FRFD, by choosing an appropriate fractional Fourier transform (FRFT) order, the presented architecture can concentrate the broadband LFM signal into only one sub-channel and that will prevent it from crossing several sub-channels. Thus the performance of the signal detection and parameter estimation after the sub-channel output will be improved significantly. The computational complexity is reduced enormously due to the implementation of the polyphase filter bank decomposition, thus the proposed architecture can be realized as efficiently as in the Fourier domain. The related simulation results are presented to verify the validity of the theories and methods involved in this paper.
基金Project(2013QNA49)supported by the Fundamental Research Funds for the Central Universities,China
文摘In radio receivers,complete implementation of the software defined radio(SDR) concept is mainly limited by frontend.Based on bandpass sampling(BPS) theory,a flexible digital frontend(DFE) platform for SDR receiver is designed.In order to increase the processing speed,Gigabit Ethernet was applied in the platform at speed of 5×10~8 bit/s.By appropriate design of interpolant according to the position of input RF signals,multi-band receiving can be realized in the platform with suppression more than 35 d B without changing hardware.
基金Supported by Key Technologies Research and Development Program of China(Grant No.2019YFB2004502)National Natural Science Foundation of China(Grant Nos.51805350,51775362)Postdoctoral Science Foundation of China(Grant No.2019M651073).
文摘With the widespread application of the computer and microelectronic technology in the industry,digitization becomes the inevitable developing trend of the hydraulic technology.Digitization of the hydraulic components is critical in the digital hydraulic technology.High-speed on-of valves(HSVs)which convert a train of input pulses into the fast and accurate switching between the on and of states belong to widely used basic digital hydraulic elements.In some ways,the characteristics of the HSVs determine the performance of the digital hydraulic systems.This paper discusses the development of HSVs and their applications.First,the HSVs with innovative structures which is classifed into direct drive valves and pilot operated valves are discussed,with the emphasis on their performance.Then,an overview of HSVs with intelligent materials is presented with considering of the switching frequency and fow capacity.Finally,the applications of the HSVs are reviewed,including digital hydraulic components with the integration of the HSVs and digital hydraulic systems controlled by the HSVs.
文摘Digital to analog converters(DAC)play an important role as a bridge connecting the analog world and the digital world.With the rapid development of wireless communication,wideband digital radar,and other emerging technologies,better performing high-speed high-resolution DACs are required.In those applications,signal bandwidth and high-frequency linearity often limited by data converters are the bottleneck of the system.This article reviews the state-of-the-art technologies of high-speed and high-resolution DACs reported in recent years.Comparisons are made between different architectures,circuit implementations and calibration techniques along with the figure of merit(FoM)results.
基金the National Program on Key Basic Research Project(973 Program)(No.6132570201).
文摘To reduce the charge-coupled device(CCD)readout noise and improve the detection ability under low illumination and dim targets,a new low-noise CCD signal processing technology-CCD digital denoiseis gradually being employed in aerospace detection and other fields.In this study,the main readout noise of CCD detectors and its characteristics are analyzed.A CCD digital denoise system and an experimental platform are designed as well as established by using a PCIe data acquisition card.According to the characteristics of readout noise,some digital filters are analyzed and designed based on distributed kernel coefficient,and the optimal kernel coefficients are obtained through iteration.Then,CCD signal and filter model are established,and the optimal filter is designed to apply to the digital denoise system.Finally,according to the image data obtained from the system,the performance of the digital denoise system and digital filtering algorithm is evaluated and compared.At 500 kHz and 1 MHz CCD readout rates,the denoising performance of the optimal filter designed in the experiment is 16%-32%higher than that of the digital filter with kernel distribution coefficient,and 50%-60%higher than that of the traditional correlated double sampling technology.
基金supported by the National Natural Science Foundation of China(Grant Nos.11925202 and 11872009)National Science and Technology Major Project(Grant No.J2019-V-0006-0099)。
文摘Based on the recently proposed mirror-assisted multi-view digital image correlation(MV-DIC),we establish a cost-effective and easy-to-implement mirror-assisted multi-view high-speed digital image correlation(MVHS-DIC)method and explore its applications for dual-surface full-field dynamic deformation measurement.In contrast to the general requirement of four expensive high-speed cameras for dual-surface dynamic deformation field measurement,the established mirror-assisted MVHS-DIC halves the cost by involving only two synchronized high-speed cameras and two planar mirrors.The two synchronized high-speed cameras can dynamically measure the front and rear surfaces of a sheet sample simultaneously through the reflection of the two mirrors.The results on the two surfaces are then transformed into the same coordinate system,leading to the required dual-surface 3D dynamical deformation fields.The effectiveness and accuracy of the established system are validated through modal tests of a cantilever aluminum sheet.The vibration measurement of a drum and dual-surface transient deformation measurement of a smartphone in the drop-collision process further prove its practicability.Benefiting from the attractive advantages of multi-view dynamic deformation measurement in a cost-efficient way,the established mirror-assisted MVHS-DIC is expected to encourage more comprehensive dynamic mechanical behavior characterization of regular-sized materials and structures in vibration and impact engineering fields.
文摘Digital Holography (DH) has brought a new impetus to the field of holography. The fields of imaging, microscopy and metrology have all benefited from these developments. In this paper some of these developments will be described with some applications in the fields of color imaging, amplitude and phase microscopy and dynamic metrology. It is envisaged that this field will rapidly advance in the next couple of years and become an expected imaging and measurement modality especially in the field of micro, nano and bio sciences.