Dry matter production and panicle characteristics of high yield and good taste indica hybrid rice varieties

Indica hybrid rice(Oryza sativa) production aims to achieve two crucial targets: high yield and good taste. This study selected three types of indica hybrid rice according to grain yield and taste value, including high yield and good taste(HYGT), low yield and good taste(LYGT), and high yield and poor taste(HYPT), to analyze yield components,corresponding growth characteristics, and rice taste quality. When values were averaged across varieties and years,there were almost no differences in taste value between HYGT and LYGT;HYGT showed a significant increase in yield,owing to a higher number of panicles and spikelets per panicle, with a respective increment of 16.2 and 20.6%. The higher grain yield of HYGT compared with LYGT was attributed to three key factors: a higher leaf area index(LAI) during heading, a higher ratio of grain to leaf, and a higher biomass accumulation at maturity. HYGT and HYPT achieved similar high yields;however, HYGT had more panicle numbers and lower grain weight. In addition, HYGT showed a significantly higher taste value than HYPT, attributed to its significantly lower protein and amylose contents, with reductions of 8.8and 15.7%, respectively. Lower protein and amylose contents might be caused by a proper matter translocation from vegetative organs to panicle. This study suggested that reasonable panicle characteristics and translocation efficiency from vegetative organs to panicle during heading to maturity are the key factors in balancing yield and rice taste quality.These results will provide valuable insights for rice breeders to improve the grain yield and quality of indica hybrid rice.

Effects of paclobutrazol application on plant architecture,lodging resistance,photosynthetic characteristics,and peanut yield at different single-seed precise sowing densities

The key to high-yielding peanut cultivation is the optimization of agricultural production practices.Regulating single-seed precise sowing(SSPS)density and paclobutrazol(Pbz)application concentration are effective practices that increase peanut yield by improving plant architecture,lodging resistance,and photosynthetic characteristics.Therefore,we conducted a two-factor field optimization experiment for the sowing density(D1:1.95×10^(5)plants ha^(-1),D52:2.40×10plants ha^(-1),D3:2.85×10^(5)plants ha^(-1),and D4:3.30×10^(5)plants ha^(-1))and Pbzapplication concentration(P0:0 mg L^(-1)and P1:100 mg L^(-1)).The objective was to optimize agricultural production practices and provide a theoretical basis for highyielding peanut cultivation by evaluating the effects of sowing density and Pbzapplication on plant architecture,lodging resistance,photosynthetic characteristics,and yield.The results showed that at the same Pbzapplication concentration,increasing sowing density increased lodging percentage and reduced leaf photosynthetic capacity.At the same sowing density,Pbzapplication reduced lodging percentage by decreasing plant height(PH),improving lignin biosynthesis-related enzyme activities,and enhancing stem puncture strength(SPS)and breaking strength(SBS).The paclobutrazol-induced alterations in plant architecture and lodging resistance improved light transmission at the middle and bottom leaf strata,resulting in the increase in relative chlorophyll content and net photosynthetic rate(Pn)of leaves.Furthermore,D3P1treatment had the highest peanut yield among all treatments.In summary,the production strategy combining the sowing density of 2.85×10^(5)plants ha^(-1)with the application of100 mg L^(-1)Pbzwas found to be the optimal agricultural production practice for giving full play to production potential and achieving higher peanut yield.

Improvement in discharge characteristics and energy yield of ozone generation via configuration optimization of a coaxial dielectric barrier discharge reactor

Dielectric barrier discharge (DBD) has been widely employed in ozone generation.However,the technology still exhibits relatively low energy yield (E_(Y)) referring to its theoretical value.In this work,E_(Y)of ozone generation was improved by optimizing the mesh number,electrode length,and dielectric material in a coaxial DBD reactor with two wire mesh electrodes.Meanwhile,the discharge characteristics were investigated to elucidate the effect of reactor configuration on E_(Y).Results showed that the discharge characteristics were improved by increasing the mesh number,electrode length,and relative permittivity.When the mesh number was increased from 40 to 100,an improvement of approximately 48%in E_(Y) was obtained.Additionally,higher E_(Y) values were obtained using corundum as the dielectric material relative to polytetrafluoroethylene and quartz.Ultimately,E_(Y) in the optimal DBD reactor could reach 326.77 g·(k W·h)^(-1).Compared with the reported DBD reactor,the coaxial DBD reactor with the mesh electrode and the dielectric material of corundum could effectively improve E_(Y),which lays a foundation for the design of high-efficiency coaxial DBD reactor.

Effects of Planting Density on Yield and Sourcesink Characteristics of Sweet Potato[Ipomoea batatas(L.) Lam]

[Objective] The aim was to resolve the issue of sparsely planting （37 500-40 500 plants/hm2） of sweet potato in hilly areas. [Method] The starch-oriented Jishu No.21 and raw-eating oriented Jishu No.22 were studied to explore effects of planting density on yield and sink and source characteristics of sweet potato. [IRe- suit] Leaf area index of Jishu No.21 and Jishu No.22 were increasing upon planting density. Leaf area index of the same planting density showed a single-peak curve. Specifically, leaf area index grew fast during the 40th-80th d after planting, and reached the peak on the 80th d after planting, followed by decreasing. What＇s more, ventilation and sunshine transmission both declined upon planting density, as well as the number of leaf, the number of branch, the length of vine, dry and fresh weights of stem and leaf. When planting density exceeded 75 000 plants/hm2, the yield of sweet potato dropped dramatically. Besides, the optimal planting density tended to be volatile upon cultivars. For example, the range of 45 000-60 000 plants/hm2 is the optimal planting density of Jishu No.21 and the range of 60 000-75 000 plants/hm2 is the optimal planting density of Jishu No.22. [Conclusion] It can be concluded that rational planting densities would well coordinate sweet potato growth of ground parts and underground parts to get a high yield by providing a rational group structure. Considering the optimal planting density differs upon cultivars, it is necessary to take genotype, environment, soil fertility and planting density into consideration in determining planting density.

Effects of ABA on Photosynthetic Characteristics of Pods and Yield of Brassica napus

[Objective] The aim was to evaluate the effects of different concentrations of ABA on photosynthetic characteristics of pods and yield of Brassica napus and analyze the relationships between ABA concentration and yield components, to provide theoretical basis for cultivation of high-yield rapeseed. [Method] At the end of flowering stage, the rape plants were separately sprayed with 1, 2, 100 and 200μmol/L of ABA; photosynthetic parameters, water use efficiency （WUE）, yield and yield components of the rape plants were investigated 0, 5, 10 and 15 d later, respectively. [Result] ABA treatment with different concentrations significantly changed pod photosynthetic parameters and yield components of rapeseed. Low concentra- tions of ABA could improve pod＇s net photosynthetic rate and yield components while high concentrations had the contrary effect. [Conclusion] Whether ABA func- tioned in inhibiting or promoting role might depend on the interaction between endogenous hormone levels and exogenous ABA concentration. Improvement of WUE would be the main reason for yield increasing.

Characteristics of Retoon Rice Yield Components and Relationship of the Characteristics with Rate of Bud Emergence and Root Activity

[Objective] The aim was to study on characteristics of retoon rice yield components, and relationship of the characteristics with born bud rate and root ac- tivity of retoon rice before harvesting. [Method] Eighteen mid-season hybrid rice va- rieties approved recently were taken as materials in high-yield cultivation conditions. Characteristics of retoon rice yield components were analyzed, and relationship of yield components characteristics with the rate of bud emergence and root activity of retoon rice before harvesting was explored, based on related data. [Result] Highly- yielding retoon rice is characterized by high effective ear number （Xl） and high set- ting percentage （X4）; the number of germinated shoots the 5^＊ d after first-batch rice was cut is a key factor for retoon rice yield and was of positive correlation with re- toon rice seedlings and effective ears, with correlation coefficients at 0.80^＊＊ and 0.76^＊＊. In addition, bleeding sap was of positive correlation with grain number and setting percentage of retoon rice and correlation coefficients were 0.50^＊ and 0.48^＊＊, and of positive correlation with average panicle weight, with correlation coefficient at 0.63. [Conclusion] It is an effective way for the rate of bud emergence and root activity at lar ecological zones. mproving retoon rice yield to increase harvesting in the test sites and simi lar ecological zones.

Effects of Nitrogen Application Amount on Growth Characteristics,Boll Development and Lint Yield of High Quality Cotton

[Objective] This study aimed to explore an optimum application amount of nitrogen for cotton cultivation. [Method] In this study, a field experiment was conducted to investigate the effects of nitrogen application amount on the growth characteristics, boll development and lint yield of high quality cotton line FZ-1. [Result] Compared with the nitrogen level of 225 kg/hm2, the lint yield had increased by 28.46% and 18.73%, respectively, with the nitrogen application amount of 300 and 375 kg/hm2. When the nitrogen application amount had increased from 225 to 300 kg/hm2, boll number per plant, boll weight and lint yield had significantly increased. At the nitrogen level of 375 kg/hm2, however, the effects of increasing lint yield were significantly less than that at the nitrogen level of 300 kg/hm2. Compared with the nitrogen levels of 225 and 375, 300 kg/hm2 of nitrogen was the optimum application amount to improve the plant height, daily increment of plant height, number of fruit branches, number ratio of nodes to fruit branches, boll volume and seed cotton weight per boll. [Conclusion] The rational management of nitrogen is the most effective way to promote the growth and development of cotton plants, ensure high yielding ability and minimize the environmental pollution caused by the overuse of nitrogen. This study had provided a sound nitrogen application strategy for the cultivation of this high-quality cotton line in the field plantation.

Population Construction and Super-high Yield Characteristics of Japonica Super Rice in Cold Regions

[Objective] This study was conducted to construct a super-high yield population of Japnica rice in cold regions of North China and to explore its characteristics. [Method] The super rice variety Longjing 21 was selected as the experimental material. Different row spacing（two levels）, plant spacing（three levels） and seedling number per hill（three levels） were designed in field trials. Then, the growth stages,dry matter accumulation, leaf area, yield and yield components of these different treatments were measured. [Result] Rice yield had significantly negative correlation with plant spacing and row spacing, but no significant correlation with seedling number per hill. Rice yield was mainly affected by plant spacing, and less affected by seedling number per hill. The best recommended specifications for plant spacing of super rice variety Longjing 21 were 24 cm for row spacing, 12 cm for plant spacing and five seedlings per hill, and the expected yield was 10 473.0 kg/hm^2.The increased number of total spikelets（4.5×108hm2or more） in populations was the major reason for high yield. Super-high yield populations had fewer tillers at the early growth stage and achieved the expected number of productive tillers at critical leaf-age（June 25）, and tiller number peaked at jointing stage（July 6） and was about 1.2 times of the expected number. The percentage of productive tillers in total tillers of super-high yield population was more than 85% at heading stage. At middle growth stage（from jointing to heading stage）, the dry matter accumulation, leaf area index（LAI） at heading stage, effective leaf area, spikelet number of population,spikelet number per leaf area unit（cm2）, and culm-sheath weight per stem of super-high yield population were significantly higher than those of other populations.At late growth stage（from heading to maturity stage）, the leaf area decreasing rate of super-high yield population was significantly smaller than that of other populations. At late growth stage（from heading to maturity stage）, the leaf area decreasing rate, crop growth rate, net assimilation rate, biomass accumulation, number of filled grains per leaf area unit（cm^2） and grain weight per leaf area unit（cm^2） of high-yield population were significantly higher than those of other populations. Output and translocation of dry matter（weight per stem and sheath and total filling rate at maturity） from heading to milky stage of super-high yield population were significantly higher than those of other populations. [Conclusion] The characteristics of superhigh yield rice in cold region of North China are enriching the amount of actual filling of sink through improving photosynthetic efficiency from heading to maturity stage on the basis of enough panicle numbers.

Effects of Low Light on Agronomic and Physiological Characteristics of Rice Including Grain Yield and Quality

Light intensity is one of the most important environmental factors that determine the basic characteristics of rice development. However, continuously cloudy weather or rainfall, especially during the grain-filling stage, induces a significant loss in yield and results in poor grain quality. Stress caused by low light often creates severe meteorological disasters in some rice-growing regions worldwide. This review was based on our previous research and related research regarding the effects of low light on rice growth, yield and quality as well as the formation of grain, and mainly reviewed the physiological metabolism of rice plants, including characteristics of photosynthesis, activities of antioxidant enzymes in rice leaves and key enzymes involved in starch synthesis in grains, as well as the translocations of carbohydrate and nitrogen. These characteristics include various grain yield and rice quality components （milling and appearance as well as cooking, eating and nutritional qualities） under different rates of shading imposed at the vegetative or reproductive stages of rice plants. Furthermore, we discussed why grain yield and quality are reduced under the low light environment. Next, we summarized the need for future research that emphasizes methods can effectively improve rice grain yield and quality under low light stress. These research findings can provide a beneficial reference for rice cultivation management and breeding program in low light environments.

Effects of melatonin implantation on cashmere yield,fibre characteristics,duration of cashmere growth as well as growth and reproductive performance of Inner Mongolian cashmere goats

Background： Exogenous melatonin could induce cashmere growth. However, induced growth of cashmere fleece by melatonin implants cannot be combined with the typical growth, resulting in earlier shedding followed by another cycle of cashmere growth. To address this issue, we examine the effects on the cashmere yield, fibre characteristics, and the growth and reproductive performance of cashmere goats of planned administration of melatonin. Methods： Eighteen half-sib, female goats were assigned to two treatments （n = 9） including a control and a treatment where melatonin （2 mg/kg BW） was implanted at the end of April and end of June. Cashmere growth and shedding were observed for approximately ] year following implantation. Fibre samples were collected monthly to determine cumulative cashmere length. Initiation and cessation dates for cashmere growth as well as the rate of cashmere growth were calculated. Cashmere yield, weight gain of dam, kidding date, litter size, and birth weight were also recorded. Results： Melatonin implantation increased cashmere yield by 34.5 % （control 553.7 g vs. melatonin 745.0 g; P〈 0.01）, cashmere length by 21.3 % （control 95.2 mm vs. melatonin 115.4 mm; P 〈 0.01）, and decreased fibre diameter by 4.4 % （control 14.6 pm vs. melatonin 14.0 IJm; P 〈 0.03）. In melatonin-treated goats, the average initiation date was earlier than in control goats （May 18, 2013 vs. July 2, 20]3; P〈 0.01） but there was a similar cessation date （March 22, 2014 vs. March 27, 2014）. Consequently, the duration of cashmere growth was longer in melatonin-treated goats than in control goats （307 vs.270 days; P 〈 0.01）. The final BW, average daily gain, kidding date, litter size, and birth weight were not influenced by melatonin implantation. Conclusions： These data indicate that melatonin implantation （2 mg/kg BW） on two occasions （late April and June） increased cashmere yield by combining the induced growth of cashmere fleece with the typical growth and decreased the fibre diameter without changing dam growth rate or reproductive performance.

Photosynthetic Characteristics of a Super High Yield Cultivar of Winter Wheat During Late Growth Period

The mechanism of high yield of winter wheat in the field at late growth period was investigated by measuring the photosynthetic characteristics of photosystem Ⅱ （PSⅡ） and xanthophylls cycle, which could provide physiological reference for breeding. Weimai 8 （W8）, a super high yield cultivar, and Lumai 14 （L14）, a control cultivar were object. The photosynthetic rate （Pn）, parameters of chlorophyll fluorescence and chlorophyll content were measured. The Pn, maximum photochemical efficiency of PSII （Fv/Fm）, quantum yield of PSII electron transport （ΦPSⅡ）, efficiency of excitation energy capture by open PSII reaction centers （Fv＇/Fm＇）, and photochemical quenching coefficient （qP） were higher in Weimai 8 compared to that in Lumai 14, a commercial high yield cultivar. Furthermore, Weirnai 8 showed a lower non- photochemical quenching coefficient and a lower de-epoxidized ratio of the xanthophyll cycle pigments than of Lumai 14 at late growth period. At mature stage, chlorophyll content of different leaves decreased both in Weimai 8 and Lumai 14. Chlorophyll content in flag, second and third leaf from the top of plant decreased more in Lumai 14 than in Weimai 8. These results suggested that Weimai 8 had more antenna pigments to absorb light energy, and had higher photosynthetic capability and photochemical efficiency of PSⅡ. The yield of Weimai 8 was also higher than that of Lumai 14.

Characteristics of Growth and Yield Formation of Rice in Rice-Fish Farming System

By using single rice cultivation as a control, the effect of rice-fish culture on growth dynamic, plant type and yield formation of rice was studied. The results showed as follows： rice-fish culture improved the physical-chemical properties of arable layer soil of paddy field, extended growth period of rice, increased dry matter and LAI of different growth stages, improved three top leaves area, deterred the degeneration of leaves function, increased the diameter of stem, promoted the growth of roots and the formation of roots in the extended stem. At the same time, rice-fish culture extended the length of basal internodes, increased the number of internodes, uplifted the gravity of plant, and depressed the root vigor. For the grain yield and yield structure office, rice-fish culture decreased ear/tillering ratio, spikelet/panicle and seed set percentage, increased grain weight. If variety choice and cultivation technology were controlled appropriately, rice-fish culture could increase the effective panicles and improve grain yield of rice.

Growth Characteristics and Yield of Late-Season Rice under No-tillage and Non-flooded Cultivation with Straw Mulching

A long-term field experiment （started at 2003） was conducted to determine the effects of different dce cultivation methods on growth characteristics and grain yield of late-season rice under double-rice cropping system in seasonal drought region of southeast China （Yujiang County, Jiangxi Province）. The rice cultivation methods included no-tillage and flooded rice cultivation （N-F）, no-tillage and non-flooded rice cultivation with straw mulching （N-SM）, and no-tillage and non-flooded rice cultivation without straw mulching （N-ZM）. There was no significant difference in rice grain yield between the N-SM and N-F treatments. However, the rice grain yields in the N-SM and N-F treatments were significantly higher than that in the N-ZM treatment. The late-season rice plants in the N-SM treatment had significantly higher numbers of effective panicles and total grains per hill compared with those in the N-ZM treatment. The above-ground dry matter of late-season rice was similar between the N-SM and N-F treatments. Compared with the N-F treatment, the N-ZM and N-SM treatments significantly decreased the leaf area at the heading stage. Moreover, the N-SM treatment could significantly increase total root length and root tip number at the grain-filling stage compared with the N-ZM treatment.

Effects of Crop Rootzone Non-Pressure Subirrigation on Tomato Physiological Characteristics, Yield, and Quality

The purpose of this article is to study the effects of different water elevations of non-pressure subirrigation on some indexes of tomato, including soil water status around crop rootzone, morphological indexes, physiological indexes, photosynthetic indexes, yield, quality, and water use efficiency. With the tomato materials of Dongsheng 1, the irrigation experiment was carried out in the greenhouse, and significance analysis was done on the experiment data through the software of DPS. The results showed that different water elevations, had significant influence on the growth, yield, and quality of tomato. The yield of the 6-cm treatment was the highest, the 3-cm treatment was inferior to the 6-cm treatment, and the 0-cm treatment was the lowest. However, the WUE was 0 cm 〉 3 cm 〉 6 cm. The sugar/acid and soluble protein was the highest under the 0-cm treatment, and the content of ascorbic acid did not decrease considerably. When compared to the 0-cm treatment, the ascorbic acid content of 6-cm and 3-cm treatment increased by 19.2 and 6.8%, respectively. These irrigation methods can satisfy the requirements of tomato growth; different water elevations have different influences on the tomato soil water status around crop rootzone, the physiological characteristics, and yield. It also harmonized the percentage between sugar and acid, increased the content of soluble protein and ascorbic acid, and made tomato more delicious. The irrigation methods can improve the quality of tomato by water control, which is worth promoting in the agricultural production.

Effects of Different Population Densities on Yield and Agronomic Characteristics of Mung Bean

With the methods of crop population physiology,the effects of different population densities on growth,development and yield of mung bean as well as the relationship between these indexes and density were studied.The results showed that the morphology indexes of mung bean plant changed significantly with planting density increasing：the plant height showed increasing trend,while the stem diameter of the basal intemode were gradually decreased.And these two indexes were sensitive to the density.The effects of planting densities on valid branch number and the height of the first branch had reached significant level.In the yield components,the effects of planting densities on the pod number per plant,the grain weight per plant and the hundred grain weight had achieved significant level.

Analytical computation of support characteristic curve for circumferential yielding lining in tunnel design

Circumferential yielding lining is able to tolerate controlled displacements without failure,which has been proven to be an effective solution to large deformation problem in squeezing tunnels.However,up to now,there has not been a well-established design method for it.This paper aims to present a detailed analytical computation of support characteristic curve(SCC)for circumferential yielding lining,which is a significant aspect of the implementation of convergence-confinement method(CCM)in tunnel support design.Circumferential yielding lining consists of segmental shotcrete linings and highly deformable elements,and its superior performance mainly depends on the mechanical characteristic of highly deformable element.The deformation behavior of highly deformable element is firstly investigated.Its whole deforming process can be divided into three stages including elastic,yielding and compaction stages.Especially in the compaction stage of highly deformable element,a nonlinear stress-strain relationship can be observed.For mathematical convenience,the stress-strain curve in this period is processed as several linear sub-curves.Then,the reasons for closure of circumferential yielding lining in different stages are explained,and the corresponding accurate equations required for constructing the SCC are provided.Furthermore,this paper carries out two case studies illustrating the application of all equations needed to construct the SCC for circumferential yielding lining,where the reliability and feasibility of theoretical derivation are also well verified.Finally,this paper discusses the sensitivity of sub-division in element compaction stage and the influence of element length on SCC.The outcome of this paper could be used in the design of proper circumferential yielding lining.

Effect of Irrigation and Rainfall on Water Consumption Characteristics and Yield of High Yield Highland Barley in Tibet River Valley

This paper was to study the effect of irrigation and rainfall on water consumption characteristics and yield of high yield highland barley in Tibet river valley.In pots, highland barley-25 of Tibet was used as the test material to provide eight water stress treatments： normal water, slight water stress, middle water stress, and severe water stress in two environmental conditions（the whole growth period water stress and the rainwater irrigation after filling stage）. Test results indicated that water consumption increased with soil water rise. The maximum consumption of water was at the joining stage and filling stage. And then, the results showed that under rainwater irrigation treatment, the more the soil moisture was, the more the water consumption was. The water stress in whole highland barely growth period reduced biomass and yield. Compared with that of normal water treatment, biomass of slight water stress, middle water stress and severe water stress treatment was decreased by 29.9%, 41.7% and 47.6%, respectively, and yield of the three treatments was decreased by 15.8%, 43.7% and 57.2%, respectively. But rainfall after filling stage was beneficial to biomass and yield of highland barely. Compared with water stress on whole growth period, the biomass and yield of rainfall treatments after the filling stage were increased by 13%, 75.8%, 128.1%, 157.8% and 42.8%, 84%, 201.6%,and 269.5%. The results indicated that biomass and yield of rainwater irrigation after the filling stage had compensatory effect for highland barley growth under water stress, and could improve the water use efficiency. Therefore, properly rainwater usage is beneficial to the increase of yield and water use efficiency of Tibet highland barley-25 under water stress.

Effects of Copper-based Nutritional Foliar Fertilizers on Photosynthetic Characteristics,Yield and Disease Control Efficiency of Cotton

[Objectives] The effects of copper-based nutrient foliar fertilizer on photosynthetic characteristics,yield,accumulation and distribution of trace elements in various organs,disease prevention effect and soil enzyme activity were studied,so as to provide a theoretical basis for the application of foliar fertilizers in cotton production. [Methods]Through two years of field experiments,six treatments were set in total,namely spraying water( CK),traditional Bordeaux mixture( BDM),Kocide 2000( KCD),copper-based nutrient foliar fertilizer( CF),iron-copper-based nutrient foliar fertilizer( CFFe),and zinc-boron-copper-based nutrient foliar fertilizer( CFZnB). Randomized block arrangement was adopted. Chlorophyll content in leaves was measured at each growth stage of the cotton. Photosynthetic characteristics of leaves were measured at the peak bolling stage. Plants were sampled at initial boll opening stage. The whole plant was divided into root,stem,leaf and cotton boll parts,in which the total copper,total zinc,total iron contents and accumulations were determined. Soil samples were collected from each plot,followed by the determination of soil enzyme activity. Disease index was investigated at bud,flowering and boll-forming and boll opening stage. [Results]( 1) Spraying CFFe,CFZnB,CF and KCD could significantly improve chlorophyll content of cotton leaves,and the CFFe treatment had the highest increase up to13. 30%,followed by the CFZnB treatment,which was 11. 40% higher than the CK; and photosynthetic rate,stomata conductance and transpiration rate could be improved significantly,and the CFFe treatment showed the highest photosynthetic rate,which increased by 26. 35% compared with the CK,followed by the CFZnB treatment,which increased by 17. 96% compared with CK; and intercellular CO2 concentration was significantly reduced.( 2) Spraying BDM,KCD,CF,CFFe and CFZnB can significantly increase total copper content and accumulation in various cotton organs( except the total copper content in the stem part of the CFZnB treatment; the CFZnB and CFFe treatments can significantly increase total zinc content and accumulation in various cotton organs; and spraying CFFe,CFZnB and CF can significantly increase total iron content and accumulation in various cotton organs( except the total iron content in the stem part of the CF treatment).( 3)Spraying CFFe,CFZnB,CF,KCD and BDM greatly reduced the disease index at flowering and boll-forming and boll opening stages.( 4) The CFZnB and CFFe treatments had the highest soil urease activity,which was 7. 14% higher than that of the CK,but the difference from the CK was not significant; the catalase activity of each treatment was significantly higher than that of the BDM treatment; and the sucrase activity of each treatment was significantly higher than that of the CK.( 5) Spraying CFFe,CFZnB,CF and KCD significantly improved lint yield of cotton,and the CFZnB treatment showed the highest yield increase up to 12. 34%,followed by the CFFe treatment,with an increase in the range of 8. 77%-10. 20%. [Conclusions]Copper-based nutrient foliar fertilizers have dual functions of disease control and prevention and plant nutrition and health care,and not only can significantly increase cotton yield,but also has certain disease prevention effect.It is recommended to use copper-based nutrient foliar fertilizers.

Changes of Physiological Characteristics and Yield in Peanut Varieties with Different Resistance Effected by Peanut Scab

In order to identify the resistance of peanut varieties against scab disease, the changes of physiological characteristics and yield in two peanut varieties ＇Heyou 13＇ and ＇Quanhual0＇ with different resistance effected by peanut scab were stud- ied in field experiment by spray. The results showed the soluble sugar increased firstly and then decreased both in the resistant and susceptible peanuts after inocu- lation. Compared with the control, the soluble sugar of resistant peanut was higher, and that of the susceptible peanut was lower, which implied that the peanut resis- tance to scab was positive correlated with soluble sugar content. The soluble pro- tein content in leaves of resistant and susceptible peanut varieties after inoculation was higher than that of the control. The peak of soluble protein content appeared earlier in the susceptible peanut than in the resistant peanut, which indicated that the susceptible peanut were more sensitive to the pathogen than the resistant peanut. The leaf SOD activity increased firstly and then decreased both in resistant and susceptible varieties, while the decrease in the resistant variety were lower than in the susceptible variety. With the growth process, the CAT and POD activities first decreased, then increased, and again decreased. Compared with the corresponding control, the resistant variety had relatively higher CAT and POD activities than the susceptible variety, which illustrated that the protective enzymes played important roles in resistance mechanism to scab. The MDA content of the two peanut vari- eties after inoculation increased, indicating that plasma membranes were subjected to different degrees of damage. The yield of resistant and susceptible varieties after inoculation reduced, while the yield of the susceptible peanut of ＇Quanhua 10＇ reduced greater.

Regulation effects of water and nitrogen on yield,water,and nitrogen use efficiency of wolfberry

Wolfberry(Lycium barbarum L.)is important for health care and ecological protection.However,it faces problems of low productivity and resource utilization during planting.Exploring reasonable models for water and nitrogen management is important for solving these problems.Based on field trials in 2021 and 2022,this study analyzed the effects of controlling soil water and nitrogen application levels on wolfberry height,stem diameter,crown width,yield,and water(WUE)and nitrogen use efficiency(NUE).The upper and lower limits of soil water were controlled by the percentage of soil water content to field water capacity(θ_(f)),and four water levels,i.e.,adequate irrigation(W0,75%-85%θ_(f)),mild water deficit(W1,65%-75%θ_(f)),moderate water deficit(W2,55%-65%θ_(f)),and severe water deficit(W3,45%-55%θ_(f))were used,and three nitrogen application levels,i.e.,no nitrogen(N0,0 kg/hm^(2)),low nitrogen(N1,150 kg/hm^(2)),medium nitrogen(N2,300 kg/hm^(2)),and high nitrogen(N3,450 kg/hm^(2))were implied.The results showed that irrigation and nitrogen application significantly affected plant height,stem diameter,and crown width of wolfberry at different growth stages(P<0.01),and their maximum values were observed in W1N2,W0N2,and W1N3 treatments.Dry weight per plant and yield of wolfberry first increased and then decreased with increasing nitrogen application under the same water treatment.Dry weight per hundred grains and dry weight percentage increased with increasing nitrogen application under W0 treatment.However,under other water treatments,the values first increased and then decreased with increasing nitrogen application.Yield and its component of wolfberry first increased and then decreased as water deficit increased under the same nitrogen treatment.Irrigation water use efficiency(IWUE,8.46 kg/(hm^(2)·mm)),WUE(6.83 kg/(hm^(2)·mm)),partial factor productivity of nitrogen(PFPN,2.56 kg/kg),and NUE(14.29 kg/kg)reached their highest values in W2N2,W1N2,W1N2,and W1N1 treatments.Results of principal component analysis(PCA)showed that yield,WUE,and NUE were better in W1N2 treatment,making it a suitable water and nitrogen management mode for the irrigation area of the Yellow River in the Gansu Province,China and similar planting areas.