Effects of the strain rate on cement paste, mortar and concrete were studied. A modified SHPB testing technique with fl attened Brazilian disc（FBD） specimen was developed to measure the dynamic tensile stress-strain...Effects of the strain rate on cement paste, mortar and concrete were studied. A modified SHPB testing technique with fl attened Brazilian disc（FBD） specimen was developed to measure the dynamic tensile stress-strain curve of materials. A pulse-shaped split Hopkinson pressure bar（SHPB） was employed to determine the dynamic tensile mechanical responses and failure behavior of materials under valid dynamic testing conditions. Quasi-static experiments were conducted to study material strain rate sensitivity. Strain rate sensitivity of the materials was measured in terms of the stress-strain curve, elastic modulus, tensile strength and critical strain at peak stress. Empirical relations between dynamic increase factor（DIF） and the material properties were derived and presented.展开更多
A novel approach is proposed in determining dy- namic fracture toughness （DFT） of high strength steel, using the split Hopkinson tension bar （SHTB） apparatus, com- bined with a hybrid experimental-numerical method...A novel approach is proposed in determining dy- namic fracture toughness （DFT） of high strength steel, using the split Hopkinson tension bar （SHTB） apparatus, com- bined with a hybrid experimental-numerical method. The center-cracked tension specimen is connected between the bars with a specially designed fixture device. The fracture initiation time is measured by the strain gage method, and dynamic stress intensity factors （DSIF） are obtained with the aid of 3D finite element analysis （FEA）. In this approach, the dimensions of the specimen are not restricted by the connec- tion strength or the stress-state equilibrium conditions, and hence plane strain state can be attained conveniently at the crack tip. Through comparison between the obtained results and those in open publication, it is concluded that the ex- perimental data are valid, and the method proposed here is reliable. The validity of the obtained DFT is checked with the ASTM criteria, and fracture surfaces are examined at the end of paper.展开更多
基金Funded by the National Natural Science Foundation of China(No.51509078)the Natural Science Foundation of Jiangsu Province(No.BK20150820)
文摘Effects of the strain rate on cement paste, mortar and concrete were studied. A modified SHPB testing technique with fl attened Brazilian disc（FBD） specimen was developed to measure the dynamic tensile stress-strain curve of materials. A pulse-shaped split Hopkinson pressure bar（SHPB） was employed to determine the dynamic tensile mechanical responses and failure behavior of materials under valid dynamic testing conditions. Quasi-static experiments were conducted to study material strain rate sensitivity. Strain rate sensitivity of the materials was measured in terms of the stress-strain curve, elastic modulus, tensile strength and critical strain at peak stress. Empirical relations between dynamic increase factor（DIF） and the material properties were derived and presented.
基金supported by the 111 Project (B07050)the National Natural Science Foundation of China (10932008)
文摘A novel approach is proposed in determining dy- namic fracture toughness （DFT） of high strength steel, using the split Hopkinson tension bar （SHTB） apparatus, com- bined with a hybrid experimental-numerical method. The center-cracked tension specimen is connected between the bars with a specially designed fixture device. The fracture initiation time is measured by the strain gage method, and dynamic stress intensity factors （DSIF） are obtained with the aid of 3D finite element analysis （FEA）. In this approach, the dimensions of the specimen are not restricted by the connec- tion strength or the stress-state equilibrium conditions, and hence plane strain state can be attained conveniently at the crack tip. Through comparison between the obtained results and those in open publication, it is concluded that the ex- perimental data are valid, and the method proposed here is reliable. The validity of the obtained DFT is checked with the ASTM criteria, and fracture surfaces are examined at the end of paper.
