Microstructure evolution and strengthening mechanism of high -performance powder metallurgy TA15 titanium alloy by hot rolling

Hot deformation of sintered billets by powder metallurgy(PM)is an effective preparation technique for titanium alloys,which is more significant for high-alloying alloys.In this study,Ti–6.5Al–2Zr–Mo–V(TA15)titanium alloy plates were prepared by cold press-ing sintering combined with high-temperature hot rolling.The microstructure and mechanical properties under different process paramet-ers were investigated.Optical microscope,electron backscatter diffraction,and others were applied to characterize the microstructure evolution and mechanical properties strengthening mechanism.The results showed that the chemical compositions were uniformly dif-fused without segregation during sintering,and the closing of the matrix craters was accelerated by increasing the sintering temperature.The block was hot rolled at 1200℃ with an 80%reduction under only two passes without annealing.The strength and elongation of the plate at 20–25℃ after solution and aging were 1247 MPa and 14.0%,respectively,which were increased by 24.5%and 40.0%,respect-ively,compared with the as-sintered alloy at 1300℃.The microstructure was significantly refined by continuous dynamic recrystalliza-tion,which was completed by the rotation and dislocation absorption of the substructure surrounded by low-angle grain boundaries.After hot rolling combined with heat treatment,the strength and plasticity of PM-TA15 were significantly improved,which resulted from the dense,uniform,and fine recrystallization structure and the synergistic effect of multiple slip systems.

Influence of Production Sequence of Aluminum Alloy Hot Rolling on Strip Surface Quality

With the intensification of market competition in the aluminum alloy strip processing industry,it is dif-ficult to control the mass production of the same specifications,which is bound to affect the hot rolling production.This paper studied the effect of the hot rolling order of aluminum alloy on the surface quality of strip,such as roll printing,color difference,anodic oxidation,etc.,reasonable discharge sequence and corresponding optimization measures were formulated.

Achieving oxidation protection effect for strips hot rolling via Al_(2)O_(3) nanofluid lubrication

It was discovered the application of Al_(2)O_(3) nanofluid as lubricant for steel hot rolling could synchronously achieve oxidation protection of strips surface.The underlying mechanism was investigated through hot rolling tests and molecular dynamics (MD) simulations.The employment of Al_(2)O_(3) nanoparticles contributed to significant enhancement in the lubrication performance of lubricant.The rolled strip exhibited the best surface topography that the roughness reached lowest with the sparsest surface defects.Besides,the oxide scale generated on steel surface was also thinner,and the ratio of Fe_(2)O_(3) among various iron oxides became lower.It was revealed the above oxidation protection effect of Al_(2)O_(3) nanofluid was attributed to the deposition of nanoparticles on metal surface during hot rolling.A protective layer in the thickness of about 193 nm was formed to prevent the direct contact between steel matrix and atmosphere,which was mainly composed of Al_(2)O_(3) and sintered organic molecules.MD simulations confirmed the diffusion of O_(2) and H_(2)O could be blocked by the Al_(2)O_(3) layer through physical absorption and penetration barrier effect.

Three-Di mensional Model for Strip Hot Rolling

A three-dimensional model for strip hot rolling was developed, in which the plastic deformation of strip, the thermal crown of rolls, roll deflection and flattening were calculated by rigid-plastic finite element method, finite difference method, influential function method and elastic finite element method respectively. The roll wear was taken into consideration. The model can provide detailed information such as rolling pressure distribution, contact pressure distribution between backup rolls and work rolls, deflection and flattening of work rolls, lateral distribution of strip thickness, and lateral distribution of front and back tensions. The finish rolling on a 1 450 mm hot strip mill was simulated.

MODELING OF FERRITE GRAIN GROWTH OF LOW CARBON STEELS DURING HOT ROLLING

For most commercial steels the prediction of the final properties depends on accurately calculating the room temperature ferrite grain size. A grain growth model is proposed for low carbon steels Q235B during hot rolling. By using this model, the initial ferrite grain size after continuous cooling and ferrite grain growing in coiling procedure can be predicted. In-plant trials were performed in the hot strip mill of Ansteel. The calculated final ferrite grain sizes are in good agreement with the experimental ones. It is helpful both for simulation of microstructure evolution and prediction of mechanical properties.

Mechanical properties and texture evolution during hot rolling of AZ31 magnesium alloy

Mechanical properties and texture evolutions of the as-rolled AZ31 Mg sheets were investigated.The results show that the grains of the sheets are significantly refined after hot rolling.The mechanical properties of the as-rolled samples are enhanced due to the grain size refinement.The intensity of basal texture decreases with the increase of deformation ratio,and double-peak type basal texture is discovered in the intermediate and large strain hot rolling processes.The formation of the texture is ascribed to the activities of prismatic and non-basalslips,which is the same as the 30%rolled and 50%rolled samples.The incline of basal planes exerts an effect on the mechanical anisotropy during tension along rolling direction(RD)and transverse direction(TD)at room temperature.

Backup roll contour in finishing trains of hot rolling based on hybrid genetic algorithm

On the basis of integrating two-dimensional varying thickness finite elementmethod with hybrid genetic algorithm, a precise model was developed to design ideal backup rollcontour (Varying Contact Backup Roll, in short VCR) in finishing rains of hot rolling rapidly andefficaciously. Additionally, a lot of good actual effects of VCR, such as evident improvement ofprofile and flatness of strip, remarkable decrease of roll consume, excellent maneuverability andmaintenance, and so on, were validated by long-term industrial tests in hot rolling strip plant ofWuhan Iron and Steel Group Corporation (WISCO).

Test research on sticking mechanism during hot rolling of SUS 430 ferritic stainless steel

The sticking phenomenon during hot rolling of SUS 430 ferritic stainless steel was investigated by means of a two-disc type high-temperature wear tester. The test results indicate that sticking particles on the surfaces of high chromium steel （HiCr） and high-speed steel （HSS） rolls undergo nucleation, growth, and saturation stages. Grooves on the roll surface generated by grinding provide nucleation sites for sticking particles. The number of sticking particles on the HiCr roll surface is greater than that on the HSS roll surface. The average surface roughnesses （Ra） of HiCr and HSS rolls change from 0.502 and 0.493 μm at the initial stage to 0.837 and 0.530 μm at the saturation stage, respectively. The test further proves that the sticking behavior is strongly dependent on roll materials, and the HSS roll is more benefi- cial to prevent particles sticking compared with the HiCr roll under the same hot-rolling conditions.

Grain refining and property improvement of AZ31 Mg alloy by hot rolling

Hot rolling of AZ31 Mg alloy was performed by using as-cast alloy ingot as the starting material.The microstructures and mechanical properties of the as-rolled alloy subjected to various rolling passes were investigated.The results show that the grain size of the alloy can be refined steadily with increasing rolling passes by dynamic recrystallization.With the steady refining of the grain size,both the mechanical strength and the plasticity of the alloy are improved correspondingly.In particular,when the grain size is reduced to about 5μm after 5 rolling passes,the yield strength,ultimate tensile strength and tensile fracture strain of the alloy are 211 MPa,280 MPa and 0.28 in the transverse direction,they are 200 MPa,268 MPa and 0.32 in the rolling direction,respectively.

Analysis of bending on the front end of sheet during hot rolling

The analysis of bending in finishing rolling was performed. An asymmetrical rolling force model was established, and the upper and lower neutral points were determined. Thc bending which resulted from the asymmetrical rolling force at the roll gap was studied and related flexibility equations were proposed according to elastic mechanics. Moreover, material mechanics was used to analyze the effects of temperature difference and self-weight on the bending out of the roll gap, and the flexibility equations were constructed. The main factors on bending were summed up, and the bending rule in the rolling could be obtained. In addition practical calculation was made with the production data of ribbon steel from Laiwu Iron ＆ Steel Group Co. Ltd.

Thermal Behaviors of Work Roll in Finishing Trains of Hot Rolling

In order to analyze the thermal field and thermal contour of work roll in finishing trains of hot rolling in rolling process, a quasi two-dimension implicit finite difference model is developed. To improve the calculating speed and precision, some special solutions are introduced, including the development of this model, the simplification of boundary conditions and the computation of heat transfer coefficients. The results show that these solutions of thermal behaviors of work roll are very much efficient and the model can be used as an on-line profile and fatness control model of large industrial mills.

Effects of hot rolling on microstructure and properties of a 20 vol.% SiC_P/Al composite

A 20 vol. percent SiC_p/Al composite was fabricated by squeeze casting, ofwhich a new process for fabricating the preform was used by blending Al powder and SiC particulateswith average diameters of 10 and 3.5 mu m, respectively. The microstructure of the as-cast and thehot-rolled composite was investigated by using TEM, EDS, and SEM, and their tensile properties weremeasured at room temperature. The results show that the ultimate tensile strength and ultimateelongation of the hot-rolled composite are 80 percent and 140 percent higher than those of theas-cast one. The TEM observation result indicates that there are high density of dislocations anddislocation tangles in the hot-rolled composite. Al_2O_3 layers in the composite resulting from thesurface oxidation of the aluminum powders were damaged to spherical particles during hot rolling.All the results indicate that hot-rolling can improve the mechanical properties of the compositeand, therefore, engineering components of the 20 vol. percent SiC_p/Al composite can be produced bysqueeze casting followed by hot-rolling.

Effect of Deformation between Stands on the Strip Shape in Hot Rolling

A theoretical model about the secondary deformation is developed by the combination of analytical and experimental approaches. A system simulation based on the model is completed to predict the strip profile after the interstand deformation. On the other hand, comprehensive experiments and quantitative comparisons are made to calibrate the model for a wide variety of products. As a result, the correction of the model has been verified by the actual rolling data from production mill and it is helpful to improve the strip shape control.

Head Curvature of Pure Titanium Sheet Influenced by Process Parameters and Controlling in Hot Rolling Process

We investigated the influences of process parameters on the head curvature of pure titanium sheet in hot rolling process and proposed the controlling means. First, the thermal simulation experiments for pure titanium TA1 were carried out to investigate the hot deformation behaviors of pure titanium in the temperature range of 700-800 ℃ with strain rate range of 1-20 S-1, and the processing map was established to determine optimized deformation parameters. Then, the finite element model has been constructed and used to analyze the effect of process parameters on the direction and severity of head curvature of pure titanium sheet. The process parameters considered in the present study include workpiece temperature, work roll diameter, pass reduction, oxide scale thickness of workpiece surface, and interface friction coefficient. The simulation results show that the workpiece temperature and the interface friction coefficient are the two main factors. The proposed controlling means was carried out on a hot rolling production line and solved the head curvature problem effectively. The rolling practices indicate that the rolling yield is improved greatly.

Finite element analysis of shape control for continuous hot rolling mills of super wide strip steel

The efficacy of shape control is the core of this technology and the main basis of automatic shape control system model designing. This passage constructs the three-dimensional elastic deformation model of CVCplus roll system in 2250 mm hot rolling mill. Comparing and analyzing different influence of working factors on control characteristic, the shape control characteristic of CVCplus roll system in its whole work time is studied, and the cause is analyzed and the difference of the roll gap curve and crown adjustable area in early and latter work time is compared. The outcome has crucial meaning in both theory and production.

Slab Storage Calculation Method for Continuous Casting-Hot Rolling

Based on load-oriented manufacturing control theory,different combining modes and slab storage calculation method for continuous casting and hot rolling were discussed.The buffer capacity index of continuous casting-rolling was introduced,and the reasonable slab storage under different combining modes was calculated with buffer capacity index of 120.00 hfor CCR,79.20 hfor HCR,19.68 hfor DHCR and 3.84 hfor DR.Thin slab is 1.20 h,and the strip is zero.Theory gist was provided for steel enterprise to decrease storage.

Effect of hot rolling on the microstructure and impact absorbed energy of the strip steel by CSP

The microstructures and impact absorbed energies at various temperatures were investigated for steel strips hot rolled to thickness reductions of 95.5%, 96.0%, 96.5%, 97.0%, and 97.5%. Results indicate that grain refinement can be realized with an increase in hot rolling reduction. Besides, finer precipitates can be achieved with an increase in hot rolling reduction from 95.5%to 97.0%. The impact absorbed energy decreases with a decrease in testing temperature for steel strips hot rolled to 95.5%, 96.0%, and 96.5%reductions in thickness. However, in the case of steel strips hot rolled to 97.0%and 97.5%reductions in thickness, the impact absorbed energy remained almost constant with a decrease in testing temperature.

Microstructures,Thermal and Mechanical Properties of Pure Tungsten—A Comparison Between Selective Laser Melting and Hot Rolling

A comparative study on the influence of different manufacturing methods(selective laser melting and hot rolling)on the microstructure,mechanical and thermal behaviours of tungsten(W)was presented for the first time.The results indicated that the selective laser melting(SLM)W exhibited a finer grain sizes,a lower strength ductility,hardness and thermal conductivity compared to hot-rolled W.The main reason for this result was that the laser underwent rapid heating and cooling when it was used to melt W powder with high energy density,resulting in large internal stress in the sample after manufacturing.Subsequently,the internal stress was released,leading to the generation of microcracks at the grain boundaries,thereby affecting the performance of SLM W samples.In addition,the higher fraction of high-angle grain boundaries(HAGBs)of SLM W was found to be the key factor for intrinsic brittleness.Because the HAGBs are the preferred crack paths,which could promote crack propagation and decrease fracture energy.

Influence of Hot Rolling Conditions on the Mechanical Properties of Hot Rolled TRIP Steel

Influence of hot rolling conditions on the mechanical properties of hot rolled TRIP steel was investigated. Thermomechanical control processing （TMCP） was conducted by using a laboratory hot rolling mill, in which three different kinds of finish rolling temperatures were applied. The results show that polygonal ferrite, granular bainite and larger amount of stabilized retained austenite can be obtained by controlled rolling processes. The finer ferrite grain size is produced through the deformation induced transformation during deformation rather than after deformation, which affects the mechanical properties of hot rolled TRIP steel. Mechanical properties increase with decreasing finish rolling temperature due to the stabilization of retained austenite. Ultimate tensile strength （UTS）, total elongation （TEL） and the product of ultimate tensile strength and total elongation （UTS×TEL） reaches optimal values （791 MPa, 36% and 28 476 MPa%, respectively） when the specimen was hot rolled for 50% reduction at finish rolling temperature of 700 ℃.