In fractured reservoir beds, fracture characteristics affect seismic wave response. Fractured models based on the Hudson＇s fractured medium theory were constructed in our laboratory by a backfilling technique. For th...In fractured reservoir beds, fracture characteristics affect seismic wave response. Fractured models based on the Hudson＇s fractured medium theory were constructed in our laboratory by a backfilling technique. For the same fracture density, the variations of the velocity and amplitude of the primary wave and shear wave parallel and perpendicular to the fracture were observed by altering the diameter （scale） of the penny-shaped fracture disk. The model test indicated that an increase of fracture scale increased the velocity and amplitude of the primary wave by about 2%. When the shear wave propagated parallel to the fracture, the velocity of the fast shear wave hardly changed, while the velocity of slow shear wave increased by 2.6% with increasing fracture scale. The results indicated that an increase of fracture scale would reduce the degree of anisotropy of the shear wave. The amplitudes of slow shear waves propagating parallel and perpendicular to fractures decreased with increasing fracture scale.展开更多
During surveys, water layers may interfere with the detection of oil layers. In order to distinguish between oil and water layers in a porous cracked medium, research on the properties of cracks and oil and water laye...During surveys, water layers may interfere with the detection of oil layers. In order to distinguish between oil and water layers in a porous cracked medium, research on the properties of cracks and oil and water layers and their relation to acoustic logging rules is essential. On the basis of Hudson＇s crack theory, we simulated oil and water layers in crack-porous medium with different crack parameters corresponding to the well-field response. We found that in a cracked medium with high crack angle or low number density of cracks, compressional and shear wave velocities are sensitive to crack characteristics; further, these velocities are more sensitive to crack characteristics when the waves propagate through the water layer than when they propagate through the oil layer. Compressional and shear wave velocities increase with an increase in crack angle： in the water layer, the increase is approximately linear. On comparing the full waveforms observed in the oil and water layers, we find that the amplitudes of most waves are higher in the water layer. Among the considered waves, the Stoneley wave suffers maximum amplitude attenuation in the oil layer. The maximum excitation intensity for oil layer is greater than that for the water layer. These results can guide further cracked media logging field exploration work.展开更多
Based on Hudson’s theoretical hypothesis of equivalent fracture model,inserting aligned round chips in solid model can simulate fractured media. The effect of fractures on the propagation of P and S waves can be obse...Based on Hudson’s theoretical hypothesis of equivalent fracture model,inserting aligned round chips in solid model can simulate fractured media. The effect of fractures on the propagation of P and S waves can be observed by changing the fracture thickness. The base model is made of epoxy resin,and the material of fractures is a kind of low-velocity mixture containing silicon rubber. With constant diameter and number of fractures in each model,one group of models can be formed through changing the thickness of fracture. These models have the same fracture density. By using the ultrasonic pulse transmission method,the experiment records time and waveform of P and S waves in the direction parallel and perpendicular to the fracture orientation. The result shows that,with the same fracture density,changing fracture aperture will affect both velocity and amplitude of P and S waves,and the effect on P-wave amplitude is much greater than that on the velocity. Moreover,the variation in velocity of S wave is more obvious in the slow shear wave (S2),while the variation in amplitude is more obvious in the fast shear wave (S1). These properties of wave propagation are useful for seismic data processing and interpretation.展开更多
文摘In fractured reservoir beds, fracture characteristics affect seismic wave response. Fractured models based on the Hudson＇s fractured medium theory were constructed in our laboratory by a backfilling technique. For the same fracture density, the variations of the velocity and amplitude of the primary wave and shear wave parallel and perpendicular to the fracture were observed by altering the diameter （scale） of the penny-shaped fracture disk. The model test indicated that an increase of fracture scale increased the velocity and amplitude of the primary wave by about 2%. When the shear wave propagated parallel to the fracture, the velocity of the fast shear wave hardly changed, while the velocity of slow shear wave increased by 2.6% with increasing fracture scale. The results indicated that an increase of fracture scale would reduce the degree of anisotropy of the shear wave. The amplitudes of slow shear waves propagating parallel and perpendicular to fractures decreased with increasing fracture scale.
基金supported by the National Natural Science Foundation of China(No.40874059)the Doctoral Scientific Research Foundation of East China University of Technology(Nos.DHBK2015315,DHBK2015316)
文摘During surveys, water layers may interfere with the detection of oil layers. In order to distinguish between oil and water layers in a porous cracked medium, research on the properties of cracks and oil and water layers and their relation to acoustic logging rules is essential. On the basis of Hudson＇s crack theory, we simulated oil and water layers in crack-porous medium with different crack parameters corresponding to the well-field response. We found that in a cracked medium with high crack angle or low number density of cracks, compressional and shear wave velocities are sensitive to crack characteristics; further, these velocities are more sensitive to crack characteristics when the waves propagate through the water layer than when they propagate through the oil layer. Compressional and shear wave velocities increase with an increase in crack angle： in the water layer, the increase is approximately linear. On comparing the full waveforms observed in the oil and water layers, we find that the amplitudes of most waves are higher in the water layer. Among the considered waves, the Stoneley wave suffers maximum amplitude attenuation in the oil layer. The maximum excitation intensity for oil layer is greater than that for the water layer. These results can guide further cracked media logging field exploration work.
基金Supported by the Major State Basic Research Development Program of China (973 Project) (Grant No.2006CB202306)the Applied Basic Project of China National Petroleum Corporation (Grant No.200510101)
文摘Based on Hudson’s theoretical hypothesis of equivalent fracture model,inserting aligned round chips in solid model can simulate fractured media. The effect of fractures on the propagation of P and S waves can be observed by changing the fracture thickness. The base model is made of epoxy resin,and the material of fractures is a kind of low-velocity mixture containing silicon rubber. With constant diameter and number of fractures in each model,one group of models can be formed through changing the thickness of fracture. These models have the same fracture density. By using the ultrasonic pulse transmission method,the experiment records time and waveform of P and S waves in the direction parallel and perpendicular to the fracture orientation. The result shows that,with the same fracture density,changing fracture aperture will affect both velocity and amplitude of P and S waves,and the effect on P-wave amplitude is much greater than that on the velocity. Moreover,the variation in velocity of S wave is more obvious in the slow shear wave (S2),while the variation in amplitude is more obvious in the fast shear wave (S1). These properties of wave propagation are useful for seismic data processing and interpretation.
