Hybrid Function Projective Synchronization of Chaotic Systems with Uncertain Time-varying Parameters via Fourier Series Expansion

In this paper, the hybrid function projective synchronization (HFPS) of different chaotic systems with uncertain periodically time-varying parameters is carried out by Fourier series expansion and adaptive bounding technique. Fourier series expansion is used to deal with uncertain periodically time-varying parameters. Adaptive bounding technique is used to compensate the bound of truncation errors. Using the Lyapunov stability theory, an adaptive control law and six parameter updating laws are constructed to make the states of two different chaotic systems asymptotically synchronized. The control strategy does not need to know the parameters thoroughly if the time-varying parameters are periodical functions. Finally, in order to verify the effectiveness of the proposed scheme, the HFPS between Lorenz system and Chen system is completed successfully by using this scheme.

Band gap bowing and crossing of B_xGa_(1-x)N alloy investigated by hybrid functional method

The electronic properties of zinc-blende BxGal-xN alloys are comparatively investigated by employ- ing both the Perdewe-Burkee-Ernzerhof generalized-gradient approximation （PBE-GGA） and the Heyd-Scuseria- Ernzerhof screened hybrid functional methods （HSE06）. HSE06 reproduced much closer ground-state properties to experiments. Large and composition-dependent bowing parameters br for the direct band gaps were obtained from both PBE and HSE06. The crossover composition where alloy switches from direct to indirect was predicted to occur at very similar x from PBE and HSE06. We can obtain direct gap BxGal-xN with a gap value much larger than that of GaN by alloying x 〈 0.557 boron into GaN.

Hybrid density functional study on lattice vibration,thermodynamic properties,and chemical bonding of plutonium monocarbide

Hybrid density functional theory is employed to systematically investigate the structural,magnetic,vibrational,thermodynamic properties of plutonium monocarbide（Pu C and Pu C0.75）.For comparison,the results obtained by DFT,DFT ＋ U are also given.For Pu C and Pu C0.75,Fock-0.25 hybrid functional gives the best lattice constants and predicts the correct ground states of antiferromagnetic（AFM） structure.The calculated phonon spectra suggest that Pu C and Pu C0.75 are dynamically stable.Values of the Helmholtz free energy ？F,internal energy ？E,entropy S,and constant-volume specific heat Cv of Pu C and Pu C0.75 are given.The results are in good agreement with available experimental or theoretical data.As for the chemical bonding nature,the difference charge densities,the partial densities of states and the Bader charge analysis suggest that the Pu–C bonds of Pu C and Pu C0.75 have a mixture of covalent character and ionic character.The effect of carbon vacancy on the chemical bonding is also discussed in detail.We expect that our study can provide some useful reference for further experimental research on the phonon density of states,thermodynamic properties of the plutonium monocarbide.

Defects Energetics and Electronic Properties of Li Doped ZnO： A Hybrid Hartree-Fock and Density Functional Study

The electronic properties and stability of Li-doped ZnO with various defects have been stud- ied by calculating the electronic structures and defect formation energies via first-principles calculations using hybrid Hartree-Fock and density functional methods. The results from formation energy calculations show that Li pair complexes have the lowest formation energy in most circumstances and they consume most of the Li content in Li doped ZnO, which make the p-type conductance hard to obtain. The formation of Li pair complexes is the main obstacle to realize p-type conductance in Li doped ZnO. However, the formation energy of Lizn decreases as environment changes from Zn-rich to O-rich and becomes more stable than that of Li-pair complexes at highly O-rich environment. Therefore, p-type conductance can be obtained by Li doped ZnO grown or post annealed in oxygen rich atmosphere.

Hybrid graded element model for transient heat conduction in functionally graded materials

This paper presents a hybrid graded element model for the transient heat conduction problem in functionally graded materials （FGMs）. First, a Laplace transform approach is used to handle the time variable. Then, a fundamental solution in Laplace space for FGMs is constructed. Next, a hybrid graded element is formulated based on the obtained fundamental solution and a frame field. As a result, the graded properties of FGMs are naturally reflected by using the fundamental solution to interpolate the intra-element field. Further, Stefest＇s algorithm is employed to convert the results in Laplace space back into the time-space domain. Finally, the performance of the proposed method is assessed by several benchmark examples. The results demonstrate well the efficiency and accuracy of the proposed method.

HYBRID FEM WITH FUNDAMENTAL SOLUTIONS AS TRIAL FUNCTIONS FOR HEAT CONDUCTION SIMULATION

A new type of hybrid finite element formulation with fundamental solutions as internal interpolation functions, named as HFS-FEM, is presented in this paper and used for solving two dimensional heat conduction problems in single and multi-layer materials. In the proposed approach, a new variational functional is firstly constructed for the proposed HFS-FE model and the related existence of extremum is presented. Then, the assumed internal potential field constructed by the linear combination of fundamental solutions at points outside the elemental domain under consideration is used as the internal interpolation function, which analytically satisfies the governing equation within each element. As a result, the domain integrals in the variational functional formulation can be converted into the boundary integrals which can significantly simplify the calculation of the element stiffness matrix. The independent frame field is also introduced to guarantee the inter-element continuity and the stationary condition of the new variational functional is used to obtain the final stiffness equations. The proposed method inherits the advantages of the hybrid Trefftz finite element method （HT-FEM） over the conventional finite element method （FEM） and boundary element method （BEM）, and avoids the difficulty in selecting appropriate terms of T-complete functions used in HT-FEM, as the fundamental solutions contain usually one term only, rather than a series containing infinitely many terms. Further, the fundamental solutions of a problem are, in general, easier to derive than the T-complete functions of that problem. Finally, several examples are presented to assess the performance of the proposed method, and the obtained numerical results show good numerical accuracy and remarkable insensitivity to mesh distortion.

Hybrid functional microfibers for textile electronics and biosensors

Fibers are low-cost substrates that are abundantly used in our daily lives. This review highlights recent advances in the fabrication and application of multifunctional fibers to achieve fibers with unique functions for specific applications ranging from textile electronics to biomedical applications. By incorporating various nanomaterials such as carbon nanomaterials, metallic nanomaterials, and hydrogel-based biomaterials, the functions of fibers can be precisely engineered. This review also highlights the performance of the functional fibers and electronic materials incorporated with textiles and demonstrates their practical application in pressure/tensile sensors,chemical/biosensors, and drug delivery. Textile technologies in which fibers containing biological factors and cells are formed and assembled into constructions with biomimetic properties have attracted substantial attention in the field of tissue engineering. We also discuss the current limitations of functional textile-based devices and their prospects for use in various future applications.

Structure and Properties of Functionalized Porous Silica Hybrid Materials

Functionalized silica hybrid materials are extensively studied and applied materials in the field of science and technology. Functionalization is an approach, which allows for the application of organic components in the improvement of the design, properties and potential application of silicate materials. Silica hybrid materials, functionalized via incorporation of organic components (chitosan and methacrylic acid) were synthesized by the sol-gel method. The base silica structure of the hybrids was obtained via hydrolysis and condensation of the silicate precursor, tetraethyl orthosilicate. The investigations of synthesized hybrids are focused on the influence of the nature and quantity of functional organic components on their final structures and properties. The structural characteristics of obtained hybrid materials were investigated using XRD, FTIR, SEM and DTA/TG analysis. The obtained results presented the formation of amorphous porous structure and the organic components are evenly distributed into the silica network. The functional radicals of chitosan and methacrylic acid (amine, hydroxyl groups) exist in the hybrid structure as free reactive centers, as their quantity increases with increasing the organic amount. The swelling behavior in acidic and neutral solutions of the synthesized materials is investigated and the results presented, that the silicate materials exhibit hydrophilic character.

APPLICATION OF PENALTY FUNCTION METHOD IN ISOPARANIETRIC HYBRID FINITE ELEMENT ANALYSIS

By the aid of the penalty function method, the equilibrium restriction conditions were introduced to the isoparametric hybrid finite element analysis, and the concrete application course of the penalty function method in three-dimensional isoparametdc hybrid finite element was discussed. The separated penalty parameters method and the optimal hybrid element model with penalty balance were also presented. The penalty balance method can effectively refrain the parasitical stress on the premise of no additional degrees of freedom. The numeric experiment shows that the presented element not only is effective in improving greatly the numeric calculation precision of distorted grids but also has the universality.

A New Hybrid Model of Amino Acid Substitution for Protein Functional Classification

In this paper, a new hybrid model of amino acid substitution is developed and compared with the others in previous works. The results show that the new hybrid model can characterize the protein sequences very well by calculating Fisher weights, which can denote how much the variants contribute to the classification.

改进Hybrid A^(*)的拖挂式移动机器人路径规划算法

为了提高传统Hybrid A^(*)算法的路径规划效率和安全系数,提出一种改进的Hybrid A^(*)路径规划算法,并将此算法应用在拖挂式移动机器人系统上。首先,对启发函数进行改进,以减少路径规划过程中的计算量,从而提高规划效率;其次,设计障碍惩罚函数,进而实现提前避开行进路径上的障碍物,避免在U型障碍中陷入局部最优解;最后,考虑到拖挂式机器人模型结构的特殊性,无法将其视为质点,为此采用碰撞检测算法来提高规划路径的合理性和准确性。仿真试验验证,提出的改进Hybrid A^(*)路径规划算法可适用于拖挂式机器人系统,且具有规划效率和安全性能高、路径平滑等特点,为其在实际应用中的路径规划提供理论依据。

基于改进Hybrid A^(*)算法的阿克曼移动机器人路径规划

针对移动机器人路径规划的效率和所规划路径的安全性问题,基于阿克曼六轮转向模型,提出了一种基于改进Hybrid A^(*)算法的路径规划方法。通过改进Hybrid A^(*)算法中的启发式函数,引入距离惩罚函数,减少了节点搜索数量;通过构建安全走廊,引导移动机器人尽可能远离障碍物;在代价函数中加入了节点向前、换向和向后扩展的惩罚项,确保所规划路径的可执行性与安全性。通过仿真表明,基于改进Hybrid A^(*)算法的路径规划方法适用于阿克曼六轮移动机器人,提高了路径规划的效率,规划的路径更具安全保障。

离散mKdV Lattice和Hybrid Lattice的双曲函数型精确解(英文)

在双曲函数法和试探函数法的基础上,引入两个新的双曲试探函数,构造了离散mKd Vlattice和Hybrid Lattice的双曲函数型精确孤波解.该方法也可以用于其他非线性差分微分方程.

Hybrid-lattice系统的精确解

本文在试探函数法的基础上,给出由指数函数所组成的试探函数法,将其应用于非线性离散系统,借助符号计算系统Mathematica构造了Hybrid-Lattice系统的新的精确孤波解。该方法在构造mKdV差分微分方程、Ablowitz-Ladik-Lattice系统等其它的离散差分微分方程的精确解方面具有普遍意义。

Fabrication of Microporous Film and Microspheres Hybrids

Hybrids consisting of a microporous film and polymeric microspheres were fabricated via a simple method without a special apparatus. Highly ordered microporous polymer films with honeycomb structure were fabricated by a dissipative process utilizing amphiphilic poly(acrylic acid)- block-polystyrene, which was synthesized by atom transfer radical polymerization followed by an acid-catalyzed ester cleavage reaction. In order to embed the microsphere efficiently, the dried microporous films should be soaked in methanol to alter the surface functionality and to improve the wettability of the film surface. The introduction of amino functionality to polystyrene microspheres by seeded polymerization of N,N-dimethylaminoethyl methacrylate drastically improved the embedding efficiency. The effect of open pore size was also investigated.

Some interval-valued intuitionistic uncertain linguistic hybrid Shapley operators

Two interval-valued intuitionistic uncertain linguistic hybrid operators cal ed the induced interval-valued intuitionistic uncertain linguistic hybrid Shapley averaging （I-IIULHSA） operator and the induced interval-valued intuitionistic uncertain linguistic hybrid Shapley geometric （I-IIULHSG） operator are defined. These operators not only reflect the importance of elements and their ordered positions, but also consider the correlations among elements and their ordered positions. Since the fuzzy measures are defined on the power set, it makes the problem exponentially complex. In order to simplify the complexity of solving a fuzzy measure, we further define the induced interval-valued intuitionistic uncertain linguistic hybrid λ-Shapley averaging （I-IIULHλSA） operator and the induced interval-valued intuitionistic uncertain linguistic hybrid λ-Shapley geometric （I-IIULHλSG） operator. Moreover, an approach for multi-attribute group decision making under the interval-valued intuitionistic uncertain linguistic environment is developed. Finally, a numerical example is provided to verify the developed procedure and demonstrate its practicality and feasibility.

Photorefractivity in a Bi-functional Polymer Nanocomposites Sensitized by CdS Nanoparticle

We report an organic/inorganic hybridized nanocomposite consisting of a bi-functional poly（N-vinyl）-3-[p-nitrophenylazo]carbazolyl serves as a polymeric charge-transporting and second-order nonliner optical matrix, and CdS nanoparticles as photosensitizers to manifest photorefractive （PR） effect. The unpoled PVNPAK film exhibits a second harmonic generation （SHG） coefficient of 4.7 pm/V due to the possibility of self-alignment of the azo chromophore. Significant enhancement of photoconductivity is noticed with the increase of CdS nanoparticles concentration. The photorefractive property of the polymer nanocomposites were determined by two-beam coupling （TBC） experiment. The TBC gain and diffraction efficiency of 11.89 cm-1 and 3.2% were obtained for PVNPAK/CdS at zero electrical field.

Physiological and Biochemical Characteristics in Flag Leaves of the C Liangyou Series of Hybrid Rice Combinations at Late Growth Stages

The contents of chlorophyll, soluble sugars, soluble proteins and thiobarbitudc acid reaction substance （TBARS）, chlorophyll fluorescence parameters, net photosynthetic rate as well as the activities of superoxide dismutase （SOD） and peroxidase （POD） of flag leaves at the late growth stages were studied by using C Liangyou series of hybrid rice combinitions as material and Shanyou 63 as control. The C Liangyou series of hybrid rice combinations used in the experiment included C Liangyou 396, C Liangyou 87, C Liangyou 755 and C Liangyou 34, which all used C815S as male sterile line. The contents of chlorophyll, soluble sugars and soluble proteins in flag leaves of the C Liangyou series combinations at the late growth stages were higher than those of the control, whereas the TBARS content was lower than that of the control. The activities of SOD and POD were significantly higher than those of the control on the 7th day after heading, and then decreased slowly. ~bps, value and qp value of flag leaves decreased at the late growth stages, and these two parameters in flag leaves of the C Liangyou series combinations were higher than those of the control, while the qN value increased at the late growth stages and was lower than that of the control. The net photosynthetic rate of flag leaves at the late growth stage was higher compared with the control. These results suggest that slow senescence and strong photosynthetic capability in flag leaves at the late growth stages are the physiological basis of the C Liangyou series combinations.

SYNTHESIS OF CATALYSIS BY THE FUNCTIONALIZATION OF SILICA AND ITS APPLICATIONS

Hybrid organic-inorganic silica materials containing organic functional groups have been preparedby the reaction of activated silica with a silane coupling reagent such as N-(2-aminoethyl)3-aminopropyltrimethoxysilane. The hybrid silica was further modified by organic compounds having abifunctional group. These modified hybrid silicas were used as catalysts for various nucleophilic reactions.And also, these were complexed with metallic ions for use as catalysts for oxygen oxidation of hydrocarbons.

Hybrid GEE方法和QIF方法的比较

在纵向数据分析中,广义估计方程(GEE)方法被广泛应用.无论相关矩阵是否正确识别,通过 GEE方法得到的参数估计都是相合的.但是,当选取的工作相关矩阵与真实相关阵相差较大时,所得参数估计的效可能会较低.为了降低工作相关矩阵的选取对于参数估计的效的影响,研究者提出了二次推断函数(QIF)方法和 Hybrid GEE方法.本文通过数值模拟对 QIF方法和 Hybrid GEE方法进行分析比较.