Isolation of Microcrystalline Cellulose from Wood and Fabrication of Polylactic Acid(PLA)Based Green Biocomposites

An innovative microcrystalline cellulose(MCC)natural fibre powder-reinforced PLA biocomposite was investigated using the hand lay-up technique.The polymer matrix composite(PMC)samples were prepared by varying the weight percentages(wt.%)of both PLA matrix and MCC reinforcement:pure PLA/100:0,90:10,80:20,70:30,60:40 and 50:50 wt.%,respectively.From the results obtained,MCC powder,with its impressive aspect ratio,proved to be an ideal reinforcement for the PLA,exhibiting exceptional mechanical properties.It was evident that the 80:20 wt.%biocomposite sample exhibited the maximum improvement in the tensile,flexural,notched impact,compressive strength and hardness by 28.85%,20.00%,91.66%,21.53%and 35.82%,respectively compared to the pure PLA sample.Similarly,during the thermogravimetric analysis(TGA),the same 80:20 wt.%biocomposite sample showed a minimum weight loss of 20%at 400℃,among others.The morphological study using Field Emission Scanning Electron Microscopy(FE-SEM)revealed that the uniform distribution of cellulose reinforcement in the PLA matrix actively improved the mechanical properties of the biocomposites,especially the optimal 80:20 wt.%sample.Importantly,it was evident that the optimal PLA/cellulose biocomposite sample could be a suitable and alternative sustainable,environmentally friendly and biodegradable material for semi/structural applications,replacing synthetic and traditional components.

3D printing of personalized polylactic acid scaffold laden with GelMA/autologous auricle cartilage to promote ear reconstruction

At present,the clinical reconstruction of the auricle usually adopts the strategy of taking autologous costal cartilage.This method has great trauma to patients,poor plasticity and inaccurate shaping.Three-dimensional(3D)printing technology has made a great breakthrough in the clinical application of orthopedic implants.This study explored the combination of 3D printing and tissue engineering to precisely reconstruct the auricle.First,a polylactic acid(PLA)polymer scaffold with a precisely customized patient appearance was fabricated,and then auricle cartilage fragments were loaded into the 3D-printed porous PLA scaffold to promote auricle reconstruction.In vitro,gelatin methacrylamide(GelMA)hydrogels loaded with different sizes of rabbit ear cartilage fragments were studied to assess the regenerative activity of various autologous cartilage fragments.In vivo,rat ear cartilage fragments were placed in an accurately designed porous PLA polymer ear scaffold to promote auricle reconstruction.The results indicated that the chondrocytes in the cartilage fragments could maintain the morphological phenotype in vitro.After three months of implantation observation,it was conducive to promoting the subsequent regeneration of cartilage in vivo.The autologous cartilage fragments combined with 3D printing technology show promising potential in auricle reconstruction.

Mechanical Property Evaluation of Glass-carbon-durian Skin Fiber Reinforced Polylactic Acid Composites

The main objective of this work was to study and develop composite materials by experiments with mixtures of synthetic(glass fiber, carbon fiber) and natural fiber(durian skin fiber) reinforcements on a polylactic acid(PLA) matrix composite, because of its excellent mechanical properties. Durian skin fiber(DSF) is a natural waste throughout Thailand, and an alternative to recycling is to realize its potential as a new reinforcement through mixing and the injection molding processes. The flexural strength(σ_(F)) and flexural modulus(E_(F)) of the composites from specimens showed a maximum value by content of durian skin fiber at 10 wt%, for good performance relative to particle dispersion between the matrix and the fiber, and showed a minimum value by content of durian skin fiber at 20 wt%, because the reinforcement material affects the mechanical properties in the experiments.

Preparation and Performance of Pueraria lobata Root Powder/Polylactic Acid Composite Films

Petroleum-based materials,such as plastic,are characterized by adverse environmental pollution;as a result,researchers have sought alternative degradable plastics that are environmentally friendly,such as polylactic acid(PLA).PLA has shown great potential to replace petroleum-based plastics.In this study,seven different samples of unmodified Pueraria lobata root powder(PRP)with different contents(i.e.,0,5,10,15,20,25,and 30 wt%)and three different modified PRPs(i.e.,treated with NaOH,NaOH-KH-550,and Formic)were used to reinforce polylactic acid(PLA)via solution casting process.These prepared PRP/PLA composite films were characterized using SEM,FTIR,UV-visible spectra analysis,TG,DSC,weight loss measurement(wt%),and mechanical measurements.The results showed that the PRP modified with KH-550(PRPK)intensified the interaction in the interface region between the PRP and the PLA matrix,thus increasing the tensile strength(54.5 MPa),elongation at break(2.8%),and Young’s modulus(3310 MPa)of the PRPK/PLA biofilms.Contact angle measurement showed that the PRP treatments contributed to the hydrophobicity of films.The transparency of PRP-10/PLA film atλ_(800)was 11.09%,and its UVA and UVB transmittance were 3.28 and 1.16,respectively.After blending PLA with PRP,the PRP/PLA composite films exhibited excellent biodegradability.In summary,PRPK improved the mechanical properties of PLA and prevented the films from ultraviolet light,suggesting that PRPK-5/PLA film could be used as packaging materials.

Properties enhancement of antimicrobial chitosan-deposited polylactic acid films via cold plasma treatment

The present study aimed to understand the effect of dielectric barrier discharge cold plasma(DBD-CP)technology on the antimicrobial chitosan deposition and the properties enhancement of polylactic acid(PLA)films.The results indicated that DBD-CP was an effective method for improving the adhesion and surface hydrophilicity of PLA,facilitating the deposition of chitosan coating.This modification was attributed to the increased surface roughness,as well as the presence of polar functional groups observed through atomic force microscopy,surface free energy and Fourier transform infrared spectroscopy analysis.The study further revealed that both water resistance and mechanical properties were significantly improved after DBD-CP treatment,which was positively correlated with the amount of chitosan deposited on the PLA surfaces.Following comprehensive evaluation,the treatment at 75 W was determined as the optimal condition for enhancing the properties.Additionally,the modified film exhibited strong antimicrobial activity against Staphylococcus aureus.Consequently,the DBD-CP technology could be a promising tool for better utilization of PLA-based materials in the antibacterial food packaging industry.

Preparation, Characterization and in Vitro Release of Ciprofloxacin Polylactic Acid Microspheres

Aim Ciprofloxacin polylactic acid microspheres (CFX-PLA-MS) were preparedusing solvent evaporation method from a solid-in-oil-in-water emulsion system. Methods Orthogonalexperiment was used to optimize the method of CFX-PLA-MS preparation. Microspheres werecharacterized in terms of morphology, size, encapsulation efficiency, drug loading and in vitro drugrelease. Results The physical state of CFX-PLA-MS was determined by scanning electron microscopy(SEM) and differential scanning calorimetry (DSC) . Microspheres formed were spherical with smoothsurfaces. Drug was enveloped in microspheres without mixing physically with PLA. The averageparticle size was 280.80 ± 0.15 μm, with over 90% of microspheres falling in the range of 250 -390 μm. The encapsulation efficiency was 65.8% ± 0.58% and the drug loading was 34.1% ± 0.51% .In vitro release study revealed a profile of sustained release of Ciprofloxacin from CFX-PLA-MS. Theaccumulated release percentage and half-life (T_(1/2) of Ciprofloxacin microspheres were 84.0% in53.2 h, and 31.9 h, respectively. Higuchi equation was Q= -0.0043 + 0.003 9 t^(1/2), r = 0.9941.Conclusion Ciprofloxacin microspheres have been successfully prepared and sustained release of CFXfrom microspheres is achieved.

Biodegradation and Mechanical Property of Polylactic Acid/Thermoplastic Starch Blends with Poly (ethylene glycol)

The effects of adding poly （ethylene glycol） （PEG） into polylactic acid/thermoplastic starch blends （PLA/TPS） on the properties were investigated by DSC, SEM and mechanical property-testing. The blends of PLA/TPS blended with increasing content PEG exhibited lower temperature of glass transition （T） and lower temperature of melting （T） as well as higher melt flow index （MFI）, which indicates the plasticization and proeessability of the composites were dramatically improved. The tensile strength, flexural strength and izod impact strength of PLA/TPS （80/20） increased at first and then decreased with increasing content of PEG due to stronger interfacial adhesion. The optimized mechanical property can be obtained for the blend with 3 wt % PEG. The samples containing PEG after soil burial for 5 months showed quicker degradation being accompanied with large weight loss and mechanical properties loss.

Thermal Decomposition and Kinetics of Mixtures of Polylactic Acid and Biomass during Copyrolysis

Thermal decomposition of polylactic acid （PLA） was studied in the presence of pine wood sawdust （PS）, walnut shell （WS）, corncob （CC） in order to understand the pyrolytic behavior of these components occurring in waste. A thermogravimetric analyzer （TGA） was applied for monitoring the mass loss profiles under heating rate of 10℃·min^-1. Results obtained from this comprehensive investigation indicated that PLA was decomposed in the temperature range 300 -372℃, whereas the thermal degradation temperature of biomass is 183-462℃. The difference of mass loss （AW） between experimental and theoretical ones, calculated as algebraic sums of those from each separated component, is about 17%-46% at 300-400℃. These experimental results indicated a significant synergistic effect during PLA and biomass copyrolysis. Moreover, a kinetic analysis was performed to fit thermogravimetric data, the global processes being considered as one to two consecutive reactions. A reasonable fit to the experimental data was obtained for all materials and their blends.

Effect of Starch/Polylactic Acid Ratio on the Interdependence of Two-Phase and the Properties of Composites

Starch/polylactic acid(PLA) composites were prepared by melt extrusion, with corn starch and PLA as raw materials, glycerol as the plasticizer. Effects of starch/PLA ratio on the interdependence of two-phase and other properties of the composites were studied. The combination of results of TGA with SEM indicated that the interdependence between starch and PLA was increased gradually as the starch/PLA ratio reduced. DSC results showed that the glass transition temperature(Tg), melting temperature(Tm) and degree of crystallinity of PLA in composites were increased gradually, whereas the cold crystallization temperature(Tc) was gradually decreased as the starch/PLA ratio reduced. The rheological properties of composites were closely related with the interdependence of two-phase, with reducing starch/PLA proportion, the interdependence was increased, and then the strain for storage modulus was firstl reduced and then gradually increased. Frequency scanning showed that the storage modulus and complex viscosity were decreased with reducing starch content. As the starch/PLA ratio reduced, the matrix phase PLA was increased, so that the strength of composites was increased gradually, whereas water absorption rate was decreased gradually.

Release performance and sustained-release efficacy of emamectin benzoate-loaded polylactic acid microspheres

High-performance liquid chromatography （HPLC） was employed to determine drug release rates based on emamectin benzoate concentrations in the medium. Release kinetics equations were used to fit the drug release behavior. The effects of particle size and release medium pH on the release rate were also investigated. The indoor toxicity of emamectin benzoate-loaded polylactic acid microspheres on the diamondback moth larva （Plutella xylostella） was studied to explore drug sustained-release performance. In acidic and neutral media, the drug release behavior of the microspheres was in accord with the first-order kinetics equation. Increasing the spray dosage of emamectin benzoate-loaded polylactic acid microspheres initially resulted in an equivalent insecticidal efficacy with the conventional emamectin benzoate microemulsion. However, the drug persistence period was four-fold longer than that observed using the conventional formulation. The developed emamectin benzoate-loaded polylactic acid microspheres showed dramatic sustained-release performance. A treatment threshold of greater than 35 mg mL-1 was established for an efficient accumulated release concentration of emamectin benzoate-loaded microspheres.

Tensile Properties of Mechanically-Defibrated Cellulose Nanofiber-Reinforced Polylactic Acid Matrix Composites Fabricated by Fused Deposition Modeling

Biodegradable polymers are highly attractive as potential alternatives to petroleum-based polymers in an attempt to achieve carbon neutrality whilst maintaining the mechanical properties of the structures.Among these polymers,polylactic acid(PLA)is particularly promising due to its good mechanical properties,biocompatibility and thermoplasticity.In this work,we aim to enhance the mechanical properties of PLA using mechanically-defibrated cellulose nanofibers(CNFs)that exhibit remarkable mechanical properties and biodegradability.We also employ fused deposition modeling(FDM),one of the three-dimensional printing methods for thermoplastic polymers,for the low-cost fabrication of the products.Mechanically-defibrated CNF-reinforced PLA matrix composites are fabricated by FDM.Their tensile properties are investigated in two printing directions(0°/90°and+45°/-45°).The discussion about the relationship between printing direction and tensile behavoir of mechanically-defibrated CNF-reinforced PLA matrix composite is the unique point of this study.We further discuss the microstructure and fracture surface of mechanically-defibrated CNF-reinforced PLA matrix composite by scanning electron microscope.

Polylactic Acid Nanoparticles Targeted to Brain Microvascular Endothelial Cells

In this work, blank polylactic acid （PLA） nanoparticles with unstained surface were prepared by the nano-deposition method. On the basis of the preparation, the effect of surface modification on brain microvascular endothelial cells （BMECs） targeting was examined by in vivo experiments and fluorescence microscopy. The results showed that PLA nanoparticles are less toxic than PACA nanoparticles but their BMECs targeting is similar to PACA nanoparticles. The experiments suggest that drugs can he loaded onto the particles and become more stable through adsorption on the surface of PLA nanoparticles with high surface activity. The surface of PLA nanoparticles was obviously modified and the hydrophilicity was increased as well in the presence of non-ionic surfactants on PLA nanoparticles. As a targeting moiety, polysobate 80 （T-80） can facilitate BMECs targeting of PLA nanoparticles.

The UV Aging Properties of Maleic Anhydride Esterified Starch/Polylactic Acid Composites

Esterified starch/polylactic acid（ES/PLA） blending composite was prepared by melting extrusion with maleic anhydride esterified starch and PLA as the raw materials. The composite was accelerated aging by using UV aging box, and its properties were characterized by Fourier transform infrared spectroscopy（FT-IR）, scanning electron microscopy（SEM）, X-ray diffraction（XRD）, thermo gravimetric analysis（TGA） and mechanical testing machine. FT-IR and SEM results show that the infrared absorption peak intensities of C-O, C-H, and C=O in aged samples decrease gradually with increasing aging time. The damage degree of surface and internal of aged samples increases gradually. XRD analysis results show that after aging treatment, the crystalline diffraction peak of thermoplastic esterified starch at 2θ = 21° disappears and the diffraction peaks of PLA at 2θ = 16.5° appear, indicating that the hydrolysis rate of esterified starch is greater than that of PLA. The crystallinity of PLA in aged sample shows an increasing trend at first followed by a decreasing one along with the increasing time of aging treatment, suggesting that the hydrolysis of amorphous regions of PLA is more preferential than its crystalline regions. Because of the influence of crystal structure and the change of composition structure, the initial decomposition temperature of aging test specimen gradually increases with the extension of aging time. The maximum decomposition rate temperature and residual mass increases at first, and then decrease after the aging time extending to 1600 h. As the aging time increases, the damage degree of combination interface between esterification starch and PLA is exacerbated, resulting in the tensile strength and bending strength of aged specimen decreasing gradually.

Mechanical and Thermal Properties of Apocynum and Ramie Fiber Mat Reinforced Polylactic Acid Composites

With the increasing awareness of environmental protection and rational utilization of resources,natural fiber reinforced composites have shown broad development prospects.Apocynum fiber,known as the“king of wild fiber”,not only has moisture absorption,air permeability,and good mechanical properties but also has many health-related advantages such as antibacterial properties.In this study,four types of needle-punched Apocynum fiber and ramie fiber mat reinforced polylactic acid(PLA)composites were fabricated.Mechanical and thermal properties of the composites were tested and analyzed.The results showed that compared with those of the ramie fiber finish needle-punched mat reinforced composites,the tensile strength and the tensile modulus of Apocynum fiber finish needle-punched mat reinforced composites had increased by 15.3%and 60.1%,respectively.In comparison,the bending strength and the bending modulus were decreased by 21.8%and 7.6%,respectively.Moreover,compared with the Apocynum fiber finish needled-punched mat reinforced composites and the ramie fiber finish needle-punched mat reinforced composites,the Apocynum 50/ramie 50 finish needle-punched mat reinforced composites had the best tensile and bending properties.The after-fracture morphology was detected by a scanning electron microscope(SEM).The thermal properties of the composites were also characterized.It was found that the thermal properties of the four types of composites showed very similar behaviors.

3D Printing of Polylactic Acid Bioplastic–Carbon Fibres and Twisted Kevlar Composites Through Coextrusion Using Fused Deposition Modeling

Polylactic acid(PLA)bioplastic is a common material used in Fused Deposition Modeling(FDM)3D printing.It is biodegradable and environmentally friendly biopolymer which made out of corn.However,it exhibits weak mechanical properties which reduced its usability as a functional prototype in a real-world application.In the present study,two PLA composites are created through coextruded with 3K carbon fibres and twisted Kevlar string(as core fibre)to form a fibre reinforced parts(FRP).The mechanical strength of printed parts was examined using ASTM D638 standard with a strain rate of 1 mm/min.It has been demonstrated that the FRPs coextruded with 3K carbon fibres had achieved significant improvement in Young’s modulus(+180.6%,9.205 GPa),ultimate tensile strength(+175.3%,103 MPa)and maximum tensile strain(+21.6%,1.833%).Although the Young’s modulus of Kevlar FRP was found to be similar to as compared to unreinforced PLA(~3.29 GPa),it has gained significant increment in terms of maximum tensile strain(+179.7%,104.64 MPa),and maximum tensile strain(+257%,5.384%).Thus,this study revealed two unique composite materials,in which the 3K carbon FRP can offer stiff and high strength structure while Kevlar FRP offers similar strength but at a higher elasticity.

Biocomposites of Polylactic Acid Reinforced by DL-Lactic Acid-Grafted Microfibrillated Cellulose

Microfibrillated cellulose(MFC)is often added to polylactic acid(PLA)matrixes as a reinforcing filler to obtain fully-biodegradable composites with improved mechanical properties.However,the incompatibility between MFC and the PLA matrix limits the mechanical performance of MFC-reinforced PLA composites.In this paper,DL-lactic acid-grafted-MFC(MFC-g-DL)was used to improve the compatibility with PLA.Reinforced composites were prepared by melt extrusion and hot-cold pressing.The tensile strength of the PLA/MFC-g-DL composite increased by 22.1%compared with that of PLA after adding 1%MFC-g-DL.Scanning electron microscopy(SEM),differential scanning calorimetry(DSC),and dynamic thermomechanical analysis(DMA)were used to explore the enhancement mechanism.The energy dissipation in the MFC network and the improved compatibility between PLA and MFC-g-DL played important roles in the reinforcement.The SEM results showed that there was a closer combination between PLA and MFC-g-DL.The DSC results showed that the addition of cellulose changed the glass transition temperature,melting temperature,and crystallization temperature of PLA.The TG results showed that the initial and maximum decomposition temperature were lower than those of PLA.The ultraviolet spectra showed that the composite had good transparency at a low concentration of MFC-g-DL.

Degradation behaviors,thermostability and mechanical properties of poly(ethylene terephthalate)/polylactic acid blends

It is difficult for polyethylene terephthalate （PET） to degrade,which caused severe pollution.In this work,polylactic acid （PLA） was introduced to improve the degradation of PET.PET/PLA was synthesized by extrusion blending.The thermal,crystalline and mechanical properties of blends were investigated with TGA,DSC,WAXD and universal testing machine.The degradation of the blends in soil,acid and alkaline buffer solutions was assessed,respectively.It was found that the introduction of a little PLA promoted crystallization of PET during injection molding process.The starting decomposition temperature lowered from 412.1 ℃ of pure PET to 330.4 ℃ at 50% PLA content,tensile and bending strength of blends gradually decreased with the PLA content increasing,while the degradation rate improved.Alkaline environment was most beneficial for blends to degrade.The degradation mechanism was discussed.

Effects of Selected Printing Parameters on the Fire Properties of 3D-Printed Neat Polylactic Acid(PLA)and Wood/PLA Composites

The effects of selected printing parameters on the fire properties of additively produced composites from neat polylactic acid(PLA)and wood/PLA filaments were investigated.The reaction to fire of the 3D-printed specimens was tested according to the ISO 5660-1 cone calorimeter test method.The results showed that the properties of the specimens when exposed to fire were significantly affected by the incorporation of wood flour into the PLA filament.It was also interesting that PLA specimens had much better reactions to fire than the wood/PLA specimens.Time to ignition was found to be much longer in the 3D-printed PLA specimens.Although the maximal heat release rate was a little higher in the PLA than the wood/PLA specimens,the duration of HRR was longer for the wood/PLA specimens.The initial mass of the specimens was smaller in the wood/PLA composites,but during the radiant heat exposure the mass typically decreased slower than in the PLA specimens.

Green Modification of Cellulose Nanocrystals and Their Reinforcement in Nanocomposites of Polylactic Acid

Cellulose nanocrystals （CNCs） of rod-like shape were prepared from degreased cotton using sulfuric acid hydrolysis. The obtained CNC suspension was neutralized using a sodium hydroxide solution to remove the residual sulfuric acid and improve the thermal stability of the CNC particles. Then, poly（ethylene oxide） （PEO） was employed to modify the nanocrystals through entanglement and physical adsorption. The goal was to further improve the thermal stability and weaken the hydrophilicity of CNCs. Original and modifed CNCs were dosed into a polylactic acid （PLA） matrix to prepare nanocomposites using a hot compression process. Results of the thermogravimetric analysis showed that the initial thermal decomposition temperature of the modifed CNCs showed a 120℃ improvement compared to the original CNCs. That is, the thermal stability of the modified CNCs improved because of their shielding and wrapping by a PEO layer on their surface. Results from scanning electron microscopy and ultraviolet-visible spectrophotometry showed that the compatibility of the modifed CNCs with organic PLA improved, which was attributed to the compatibility of the PEO chains adsorbed on the surface of the CNCs. Finally, the results of tensile tests indicated a significant improvement in terms of breaking strength and elongation at the break point.

Preparation and Properties of Heat Resistant Polylactic Acid(PLA)/Nano-SiO2 Composite Filament

In order to improve the thermal properties of polylactic acid（PLA） filament,nano-SiO_2 was applied to mix with PLA,then they were spun as composite filament by melt-spinning.The dispersion of nano SiO_2 and the fracture surfaces of filaments were studied by scanning electron microscopy（SEM）.The properties of composite filament,such as orientation degree,mechanical properties,and surface friction properties,were analyzed.The thermal performances of composite filament were analyzed by differential scanning calorimetry（DSC） and thermo gravimetric analysis（TGA）.The results showed that the nano-SiO_2 modified by 5% KH-550 could disperse evenly and loosely in nano-scale,and 1 wt% and 3 wt% nano-SiO_2 dispersed throughout PLA evenly.As the quantity of nano-SiO_2 increased,the properties of composite filament,such as orientation degree,friction coefficient,thermal decomposition temperature,and glass transition temperature,increased more or less.The breaking tenacity increased when 1 wt% SiO_2 was added in PLA,but declined when 3 wt% SiO_2 was added.