Interface and energy band manipulation of Bi2O3-Bi2S3 electrode enabling advanced magnesium-ion storage

Rechargeable magnesium-ion(Mg-ion)batteries have attracted wide attention for energy storage.However,magnesium anode is still limited by the irreversible Mg plating/stripping procedure.Herein,a well-designed binary Bi_(2)O_(3)-Bi_(2)S_(3)(BO-BS)heterostructure is fulfilled by virtue of the cooperative interface and energy band engineering targeted fast Mg-ion storage.The built-in electronic field resulting from the asymmetrical electron distribution at the interface of electron-rich S center at Bi_(2)S_(3) side and electron-poor O center at Bi_(2)O_(3) side effectively accelerates the electrochemical reaction kinetics in the Mg-ion battery system.Moreover,the as-designed heterogenous interface also benefits to maintaining the electrode integrity.With these advantages,the BO-BS electrode displays a remarkable capacity of 150.36 mAh g^(−1) at 0.67 A g^(-1) and a superior cycling stability.This investigation would offer novel insights into the rational design of functional heterogenous electrode materials targeted the fast reaction kinetics for energy storage systems.

Interface electron collaborative migration of Co–Co3O4/carbon dots:Boosting the hydrolytic dehydrogenation of ammonia borane

Ammonia borane(AB)is an excellent candidate for the chemical storage of hydrogen.However,its practical utilization for hydrogen production is hindered by the need for expensive noble-metal-based catalysts.Herein,we report Co-Co3O4 nanoparticles(NPs)facilely deposited on carbon dots(CDs)as a highly efficient,robust,and noble-metal-free catalyst for the hydrolysis of AB.The incorporation of the multiinterfaces between Co,Co3O4 NPs,and CDs endows this hybrid material with excellent catalytic activity(rB=6816 mLH2 min^-1 gCo^-1)exceeding that of previous non-noble-metal NP systems and even that of some noble-metal NP systems.A further mechanistic study suggests that these interfacial interactions can affect the electronic structures of interfacial atoms and provide abundant adsorption sites for AB and water molecules,resulting in a low energy barrier for the activation of reactive molecules and thus substantial improvement of the catalytic rate.

Enhancing catalytic toluene oxidation over MnO2@Co3O4 by constructing a coupled interface

Herein,a bottom-down design is presented to successfully fabricate ZIF-derived Co3O4,grown in situ on a one-dimensional(1D)α-MnO2 material,denoted as α-MnO2@Co3O4.The synergistic effect derived from the coupled interface constructed betweenα-MnO2 and Co3O4 is responsible for the enhanced catalytic activity.The resultantα-MnO2@Co3O4 catalyst exhibits excellent catalytic activity at a T90%(temperature required to achieve a toluene conversion of 90%)of approximately 229℃,which is 47 and 28℃ lower than those of the pureα-MnO2 nanowire and Co3O4-b obtained via pyrolysis of ZIF-67,respectively.This activity is attributed to the increase in the number of surface-adsorbed oxygen species,which accelerate the oxygen mobility and enhance the redox pairs of Mn^4+/Mn^3+ and Co^2+/Co^3+.Moreover,the result of in situ diffuse reflectance infrared Fourier transform spectroscopy suggests that the gaseous oxygen could be more easily activated to adsorbed oxygen species on the surface of α-MnO2@Co3O4 than on that of α-MnO2.The catalytic reaction route of toluene oxidation over theα-MnO2@Co3O4 catalyst is as follows:toluene→benzoate species→alkanes containing oxygen functional group→CO2 and H2O.In addition,the α-MnO2@Co3O4 catalyst shows excellent stability and good water resistance for toluene oxidation.Furthermore,the preparation method can be extended to other 1D MnO2 materials.A new strategy for the development of high-performance catalysts of practical significance is provided.

Aerophilic Triphase Interface Tuned by Carbon Dots Driving Durable and Flexible Rechargeable Zn‑Air Batteries

Efficient bifunctional catalysts for oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)are vital for rechargeable Zn-air batteries(ZABs).Herein,an oxygen-respirable sponge-like Co@C–O–Cs catalyst with oxygen-rich active sites was designed and constructed for both ORR and OER by a facile carbon dot-assisted strategy.The aerophilic triphase interface of Co@C–O–Cs cathode efficiently boosts oxygen diffusion and transfer.The theoretical calculations and experimental studies revealed that the Co–C–COC active sites can redistribute the local charge density and lower the reaction energy barrier.The Co@C–O–Cs catalyst displays superior bifunctional catalytic activities with a half-wave potential of 0.82 V for ORR and an ultralow overpotential of 294 mV at 10 mA cm^(−2) for OER.Moreover,it can drive the liquid ZABs with high peak power density(106.4 mW cm^(−2)),specific capacity(720.7 mAh g^(−1)),outstanding long-term cycle stability(over 750 cycles at 10 mA cm^(−2)),and exhibits excellent feasibility in flexible all-solid-state ZABs.These findings provide new insights into the rational design of efficient bifunctional oxygen catalysts in rechargeable metal-air batteries.

Study on Interface between Sub-micron Particles and Matrix in Al_2O_3p/Al Composites

The microstructural characteristic of 1070AI matrix composites reinforced by 0.15 祄 AI2O3 particles whose volume fraction was 40% was investigated by TEM and HREM. The results showed that the interface between the matrix and reinforcements was clean and bonded well, without any interfacial reaction products. There were some preferential crystallographic orientation relationships between Al matrix and AI2O3 particle because of the lattice imperfection on the surface of Al2O3 particles.

THE SiO_(2)H_(2)O INTERFACE AND EFFECTS ON QUARTZ ACTIVATION IN FLOTATION SYSTEM

The correlation between surface complexation at the SiO_(2)H_(2)O interface and quartz notation behavior was studied.Computer assisted calculations,using the programs SOLGASWATER,were adapted in order to con-struct distribution diagrams of surface speciation in the SiO_(2)-metal ion-H^(+) system in aqueous solutions.Equilib-rium constants for both surface and solution reactions were introduced in the composition matrix.Surface complexation,surface charge as well as notation results were compared and a good agreement was obtained.Furthermore,flotation mechanisms of quartz activation by common metal ions like Ca^(2+),Mg^(2+),Fe^(2+) are quantitatively discussed based on the surface reaction equilibrium constants.

The Film-forming Behavior on the Interface between Air and Hydrosol of Fe_2O_3 Nanoparticles

The film forming behavior on the interface between air and hydrosol of Fe2O3 nanoparticles was investigated by the surface pressure-time isotherms, the surface pressure-trough area isotherms, Brewster angle microscopy and transmission electron microscopy. It is found that the freshly prepared hydrosol of Fe2O3 nanoparticles is not stable. The surface pressure increases with the aging time and finally approaches a constant, and the smaller the concentration is, the smaller the surface pressure is stabilized at and the shorter the time the hydrosol reaching stable needs. The surface pressure also increases with compression until collapsed, and the longer the hydrosol is aged, the higher the collapsing pressure is. A uniform and compact film composed of nanoparticles with an average diameter of about 2-3 nm on the air-hydrosol interface is observed by Brewster angle microscope and transmission electron microscope.

Interface states in Al_2O_3/AlGaN/GaN metal-oxide-semiconductor structure by frequency dependent conductance technique

Frequency dependent conductance measurements are implemented to investigate the interface states in Al2O3/A1GaN/GaN metal-oxide-semiconductor （MOS） structures. Two types of device structures, namely, the recessed gate structure （RGS） and the normal gate structure （NGS）, are studied in the experiment. Interface trap parameters includ-ing trap density Dit, trap time constant ιit, and trap state energy ET in both devices have been determined. Furthermore, the obtained results demonstrate that the gate recess process can induce extra traps with shallower energy levels at the Al2O3/AlGaN interface due to the damage on the surface of the AlGaN barrier layer resulting from reactive ion etching （RIE）.

Research of Trap and Electron Density Distributions in the Interface of Polyimide/Al2O3 Nanocomposite Films Based on IDC and SAXS

The distributions of traps and electron density in the interfaces between polyimide （PI） matrix and Al2O3 nanoparticles are researched using the isothermal decay current and the small-angle x-ray scattering （SAXS） tests. According to the electron density distribution for quasi two-phase mixture doped by spherical nanoparticles, the electron densities in the interfaces of PI/Al2O3 nanocomposite films are evaluated. The trap level density and carrier mobility in the interface are studied. The experimental results show that the distribution and the change rate of the electron density in the three layers of interface are different, indicating different trap distributions in the interface layers. There is a maximum trap level density in the second layer, where the maximum trap level density for the nanocomposite film doped by 25 wt% is 1.054 × 10^22 eV·m^-3 at 1.324eV, resulting in the carrier mobility reducing. In addition, both the thickness and the electron density of the nanocomposite film interface increase with the addition of the doped Al2O3 contents. Through the study on the trap level distribution in the interface, it is possible to further analyze the insulation mechanism and to improve the performance of nano-dielectric materials.

THE TRANSFER BEHAVIOUR OF SOME CATIONS AT WATER/NITROBENZENE INTERFACE BY SEMIDIFFERENTIAL CYCLIC VOLTAMMETRY

The transfer of Sr^2+ and Ba^2+ ion,facilitated by 18-crown-6 present in the aqueous phase,and of succinylcholine ion at w/nb interface were investigated by semi-differeniial cyclic voltammetry.A good polarographic curve of succinylcholine ion dissolved in water was obtained in the system of 0.01 mol/l LiCl(w)-0.01mol/l TBATPB(nb).The peak current is directly proportional to the concentration of SC^2+ ion.It can be used for the determination of SC and the detection limit is 1.05×10^-5mol/l,The apparent D^m and D^mb have been estimated.The transfer of Sr^2+ and of Ba^2+ at the interface are facilitated by 18-Crown-6 present in the aqueous phase and the peak current is directly proportional to the concentration of 18-Crown-6 in water.This method can be used for the determination of the complexing agent and for the stability constant of the complex formed in the aqueous phase.All the experimental results are in keeping with the theoretical.

虚拟I/O模块在DCS以太网通信接口模块上的实现

为减少硬件模块的重复开发,在保留原DCS软硬件系统架构不变的基础上,在以太网通信接口模块硬件上虚拟不同的I/O模块。虚拟I/O模块与硬点I/O模块具有一致的输入、输出及参数属性,且组态方式和产物格式一致。同一以太网通信模块上可在不同的虚拟I/O槽位上配置不同的虚拟I/O模块,如Modbus TCP虚拟I/O模块和GOOSE虚拟I/O模块,进而在同一硬件实现不同的通信功能。虚拟I/O模块的使用一方面减少了DCS系统硬件模块的种类,简化备品备件,另一方面也提高了通信扩展的灵活性和便利性。

THE INTERFACIAL BEHAVIORS OF ALUMINUM MATRIX COMPOSITE IN DIFFERENT WELDING METHODS

Non-interlayer liquid phase diffusion welding (China Patent) and laser welding methods for aluminum matrix composite are mainly described in this paper. In the non-interlayer liquid phase diffusion welding, the key processing parameters affecting the strength of joint is welding temperature. When temperature rises beyond solidus temperature, the bonded line vanishes. The strength of joint reaches the maximum and becomes constant when welding temperature is close to liquid phase temperature. Oxide film in the interface is no longer detected by SEM in the welded joint. With this kind of technique, particle reinforced aluminum matrix composite Al2 O3p/6061Al is welded successfully, and the joint strength is about 80% of the strength of composite (as-casted). In the laser welding, results indicate that because of the huge specific surface area of the reinforcement, the interfacial reaction between the matrix and the reinforcement is restrained intensively at certain laser power and pulsed laser beam. The laser pulse frequency directly affects the reinforcement segregation and the reinforcement distribution in the weld, so that the weldability of the composite could be improved by increasing the laser pulse frequency. The maximum strength of the weld can reach 70% of the strength of the parent.

Manipulating interfacial stability of LiNi0.5Co0.3Mn0.2O2 cathode with sulfide electrolyte by nanosized LLTO coating to achieve high-performance all-solid-state lithium batteries

All-solid-state lithium batteries(ASSLBs) based on sulfide solid-state electrolytes and high voltage layered oxide cathode are regarded as one of the most promising candidates for energy storage systems with high energy density and high safety.However,they usually suffer poor cathode/electrolyte interfacial stability,severely limiting their practical applications.In this work,a core-shell cathode with uniformly nanosized Li0.5La0.5TiO3(LLTO) electrolyte coating on LiNi0.5Co0.3Mn0.2O2(NCM532) is designed to improve the cathode/electrolyte interface stability.Nanosized LLTO coating layer not only significantly boosts interfacial migration of lithium ions,but also efficiently alleviates space-charge layer and inhibits the electrochemical decomposition of electrolyte.As a result,the assembled ASSLBs with high mass loading(9 mg cm-2)LLTO coated NCM532(LLTO@NCM532) cathode exhibit high initial capacity(135 mAh g^(-1)) and excellent cycling performance with high capacity retention(80% after 200 cycles) at 0.1 C and 25℃.This nanosized LLTO coating layer design provides a facile and effective strategy for constructing high performance ASSLBs with superior interfacial stability.

基于Cr-O-C钝化层改变多晶Cu表面能和表层位错的脱模力与脱模精度

Cr-O-C钝化层可以提高精密电铸脱模精度,但Cr-O-C钝化层对基底表面的钝化规律和对表层的影响尚未清楚。利用分子动力学方法,在多晶Cu表面沉积离散的Cr、O和C原子,获得不同比例和数量的Cr-O-C钝化层。计算结果表明,不同比例的Cr、O和C原子均可以大幅降低多晶Cu的表面能;随着原子数量的增加,多晶Cu的表面能呈下降趋势;Cr-O-C钝化层增加了多晶Cu表层的位错密度;新增加的位错以Shockley位错为主;在一定沉积原子数量内,位错密度有极值。在多晶Cu表面电沉积不同密度的Cr、O和C原子,通过接触角测试验证了Cr-O-C钝化层降低多晶Cu表面能的结论。电沉积脱模强度和脱模表面粗糙度结果显示,随着沉积原子数的增加,脱模强度和脱模表面粗糙度均降低。研究结果可为利用离散Cr-O-C界面辅助精密电铸脱模提供一种解释。

PCI—SIG宣布推出PCI EXPRESS“EXPRESSMODULE”同时宣布推出全新的PCI Express Base、Card和Mini Card 1.1规范

负责PCI Express^TM业界标准IVO技术的特别兴趣小组PCI—SIG日前宣布，推出PCI Express Express Moduae^TM规范。这个PCI Express规范定义了可热插拔的I/O扩展模块标准，能够大幅度提高企业级服务器和工作站平台的可靠性及设计灵活性。符合Express Modttle规范的产品有望于2005年底面市。

W/O乳化酸体系稳定性实验研究

从多个角度对柴油-盐酸形成的W/O型乳液体系的稳定性进行实验研究,结果表明:当乳化剂的亲油基中引入双键、长度变短、支链结构增多时,乳化酸体系的稳定性会下降;随着酸内相体积分数的增加,乳化酸粘度随之增加,乳化酸的稳定性增强;在高温条件下,密度调节剂会降低乳化酸的稳定性,与玻尔兹曼理论相悖;乳化酸的稳定性还取决于整个体系分散特性,使用脂肪醇增效剂、增加搅拌速度能减小乳液液滴的平均尺寸,增加乳化酸体系的稳定性。

基于VPC3协议芯片的Profibus-DP接口适配卡的设计研究

设计了一款基于VPC3协议芯片的Profibus-DP接口适配卡,并利用其进行了实验,结果表明通信系统工作性能好。适配卡的开发解决了Profibus总线通信组网问题,并使之更加灵活、可靠。

O型口蹄疫抗体金标检测试纸条判定标准的确立

本试验旨在迅速、准确检测口蹄疫阴性血清和阳性血清,确立O型口蹄疫抗体金标检测试纸条的判定标准。通过3批次O型口蹄疫抗体金标检测试纸条,对180份猪、牛、羊口蹄疫阴性血清,197份猪、牛O型口蹄疫弱阳性血清,317份猪、牛、羊O型口蹄疫阳性血清,223份牛Asia 1、A型口蹄疫阳性血清,600份田间血清样品进行检测,同时用O型口蹄疫液相阻断ELISA和O型口蹄疫正向间接血凝2种方法检测相同的血清样品。对3种方法检测的结果进行分析,并且将试纸条的检测线和质控线的显色情况与O型口蹄疫液相阻断ELISA的抗体滴度相比较。确立了试纸条的诊断标准:试纸条抗体滴度1∶2-为口蹄疫抗体阴性;试纸条抗体滴度1∶8+为O型口蹄疫阳性血清。根据试纸条的显色结果与液相阻断ELISA的结果的关系,绘制了比色卡。试纸条的判定标准检测血清结果与液相阻断ELISA和正向间接血凝结果分别进行统计学分析,试纸条与液相阻断ELISA和正向间接血凝相关性分别为y=1.142x+0.7421,y=1.1845x+0.8623;相关系数(r)分别为0.9221和0.9033。结果显示,O型口蹄疫抗体金标检测试纸条的判定标准的确立和比色卡的绘制,实现半定量分析,更加迅速、准确,适于实验室、基层兽医站和养殖场使用。

基于Express Card接口的千兆以太网网卡设计

针对现最常用的10/100Mbps自适应网卡网速过慢的问题,设计了一种含Express Card接口的千兆以太网网卡;用户可以方便、快捷地将其插入笔记本电脑的Express Card接口,实现高速通信;与以往采用FPGA、DSP等芯片设计的千兆以太网网卡相比,该千兆以太网网卡采用内含以太网MAC控制器、10Mbps/100Mbps/1000Mbps自适应收发器、PCI Express总线控制器等的网卡芯片RTL8111DL作为主芯片,无需再外接一片物理层芯片和一片MAC芯片;经测试:笔记本电脑可以通过此千兆以太网网卡借助五类线与外部设备握手成功,实现约260兆的高速数据传输。

无线网卡能耗建模及在GloMoSim中的实现

参照笔记本电脑无线网卡各工作模式下功率消耗实测结果,建立了ad hoc网络结点无线网卡能耗模型,并介绍了如何在GloMoSim仿真环境中进行实现。此模型可广泛用于ad hoc网络无线结点能量消耗的研究中。运用新模型对IEEE 802.11节能模式的仿真表明:在流数目较多网络负荷较大时802.11节能模式并不能有效节省结点能耗,协议还需进一步改进。