期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
阳极氧化通电电流对碳纤维层剪强度及界面亲和性的影响 被引量:1
1
作者 宋云飞 肖建文 +1 位作者 王文胜 冷晓贵 《化工科技》 CAS 2014年第6期17-20,共4页
利用阳极氧化表面处理装置,碳酸氢铵作为电解质,以恒定的处理时间,对直流电源的电流进行调节,研究电流对直径5μm的6KPAN基碳纤维层间剪切强度和拉伸强度的影响,并通过SEM对拉伸试样的断面进行观察和对比,研究电流对界面亲和性的影响。... 利用阳极氧化表面处理装置,碳酸氢铵作为电解质,以恒定的处理时间,对直流电源的电流进行调节,研究电流对直径5μm的6KPAN基碳纤维层间剪切强度和拉伸强度的影响,并通过SEM对拉伸试样的断面进行观察和对比,研究电流对界面亲和性的影响。结果表明,通电电流增大,层间剪切强度增大;合理调节通电电流,有效提高环氧树脂和碳纤维粘结强度,纤维与树脂的界面结合紧密,使纤维复材的整体承载能力增强,复丝强度较好。根据研究,直径5μm的6KPAN基碳纤维通常最佳电流强度应控制在20~25mA/K。 展开更多
关键词 拉伸强度 阳极氧化 电流 界面 层间剪切强度
下载PDF
Accelerated Ageing Tests for Evaluations of a Durability Performance of Glass-fiber Reinforcement Polyester Composites 被引量:7
2
作者 Yunying Wang Jiangyan Meng +1 位作者 Qing Zhao Shuhua Qi 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2010年第6期572-576,共5页
The paper presented accelerated ageing test results of a durability study on ortho-phthalic anhydride-type unsaturated polyester resin (191#) and its glass-fiber reinforcement polyester composites (GFRPC). The sam... The paper presented accelerated ageing test results of a durability study on ortho-phthalic anhydride-type unsaturated polyester resin (191#) and its glass-fiber reinforcement polyester composites (GFRPC). The samples were exposed in an artificial xenon arc lamp ageing cell or a thermo-oxidative ageing cell. Morphology and gloss of the specimens were investigated by using a microscope and a gloss-meter, respectively. The tensile strength, bending strength and inter-laminar shear strength (ILSS) of GFRPC were tested before and after exposure, and were considered to evaluate the durability performance of this material. The polyester resin was analyzed by fourier transform infrared (FT-IR) spectroscopy. The results showed that the glossiness of the specimens got worse and some cracks appeared on their surface during the course of ageing, the tensile strength and bending strengths of the specimens first increased and then decreased. The ILSS of the composites decreased after they were aged in the xenon arc lamp cell, but increased while they were aged in the thermo-oxidative cell. The changes of these trends become more obvious during ageing in the xenon arc lamp cell, so the main influencing factor leading to the failure of this material is UV irradiation. 展开更多
关键词 Ortho-phthalic Artificial thermo-oxidation ageing Artificial xenon arc lampageing UV irradiation inter-laminar shear strength ilss
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部