SEM-backscattered Electron Imaging and Image Processing for Evaluation of Unhydrated Cement Volume Fraction in Slag Blended Portland Cement Pastes

Proper parameters for image taking and minimum field number for image processing were investigated to evaluate volume fraction of unhydrated cement（UHC） in both neat cement paste and slag blended cement paste. Our research suggested that magnification 250x was sufficient for the two pastes, and accelerating voltage should be set as 15 kV and 20 kV for BSE image taking of neat cement paste and slag blended cement paste respectively; the minimum field number increased while the total imaging area stayed the same as the magnification increased within certain statistical bias.

Monitoring Soil Salt Content Using HJ-1A Hyperspectral Data: A Case Study of Coastal Areas in Rudong County, Eastern China

Hyperspectral data are an important source for monitoring soil salt content on a large scale. However, in previous studies, barriers such as interference due to the presence of vegetation restricted the precision of mapping soil salt content. This study tested a new method for predicting soil salt content with improved precision by using Chinese hyperspectral data, Huan Jing-Hyper Spectral Imager(HJ-HSI), in the coastal area of Rudong County, Eastern China. The vegetation-covered area and coastal bare flat area were distinguished by using the normalized differential vegetation index at the band length of 705 nm(NDVI705). The soil salt content of each area was predicted by various algorithms. A Normal Soil Salt Content Response Index(NSSRI) was constructed from continuum-removed reflectance(CR-reflectance) at wavelengths of 908.95 nm and 687.41 nm to predict the soil salt content in the coastal bare flat area(NDVI705 < 0.2). The soil adjusted salinity index(SAVI) was applied to predict the soil salt content in the vegetation-covered area(NDVI705 ≥ 0.2). The results demonstrate that 1) the new method significantly improves the accuracy of soil salt content mapping(R2 = 0.6396, RMSE = 0.3591), and 2) HJ-HSI data can be used to map soil salt content precisely and are suitable for monitoring soil salt content on a large scale.

Supplementary motor area deactivation impacts the recovery of hand function from severe peripheral nerve injury

Although some patients have successful peripheral nerve regeneration,a poor recovery of hand function often occurs after peripheral nerve injury.It is believed that the capability of brain plasticity is crucial for the recovery of hand function.The supplementary motor area may play a key role in brain remodeling after peripheral nerve injury.In this study,we explored the activation mode of the supplementary motor area during a motor imagery task.We investigated the plasticity of the central nervous system after brachial plexus injury,using the motor imagery task.Results from functional magnetic resonance imaging showed that after brachial plexus injury,the motor imagery task for the affected limbs of the patients triggered no obvious activation of bilateral supplementary motor areas.This result indicates that it is difficult to excite the supplementary motor areas of brachial plexus injury patients during a motor imagery task,thereby impacting brain remodeling.Deactivation of the supplementary motor area is likely to be a serious problem for brachial plexus injury patients in terms of preparing,initiating and executing certain movements,which may be partly responsible for the unsatisfactory clinical recovery of hand function.

Functional magnetic resonance imaging evidence for activated functional brain areas following acupoint needling in the extremities

Totally three articles focusing on functional magnetic resonance imaging features of brain function in the activated brain regions of stroke patients undergoing acupuncture on the healthy limbs and healthy controls undergoing acupuncture on the lower extremities are published in three issues. We hope that our readers find these papers useful to their research.

Study on the Urban Heat Island Effects and Its Relationship with Surface Biophysical Characteristics Using MODIS Imageries

This study assesses surface urban heat island (UHI) and its associated surface physical characteristics using remote sensing approaches. TERRA/MODIS images acquired in 2005 in three different seasons were selected to generate land surface tem-perature and surface characteristics for the Changsha-Zhuzhou-Xiangtan metropolitan area in China. The intensity of urban heat is-land effects and its seasonal variations were examined. The result showed that UHI effects were significant both in the summer and the spring. Land surface temperatures in the city were 8 ℃ to 10℃ warmer than those in surrounding rural areas in the spring and the summer seasons. Although UHI effects exist in winter, they are not significant. Land surface temperature in the city was 4℃ warmer than that in surrounding rural areas in winter. This study uses normalized difference vegetation index (NDVI) and normal-ized difference built-up index (NDBI) as indicators of surface physical characteristics and investigates the relationship among land surface temperature (LST), NDVI and NDBI. The results from this study indicate that, while the relationship between LST and NDVI changes in different seasons, there is a strong positive linear relationship between NDBI and LST for all seasons. The amount of slope and intercept of the linear relationship between NDBI and LST can indicate the magnitude of UHI for different seasons. This finding suggests that NDBI provides an alternative physical indicator for analyzing LST quantitatively over different seasons, and therefore providing a useful way to study UHI effects using remote sensing.

Chang’E-2 satellite asymmetric-descent orbit control technology

To accomplish high-resolution imaging of the preselected landing area, it was necessary for the Chang＇E-2 mission to perform orbital maneuvering on the far side of the moon to meet the conditional height requirement of the imaging area. Engine shutdown would be executed invisibly on the back side of the moon if the descent maneuver mode opposite to the target perilune or the fuel optimal maneuver mode was used. To ensure the satellite safety, the project collectivety required that the engine shutdown should be designed to be executed in the domestic segmental arcs and meet the requirement of satellite emergency treatment simultaneously. Accordingly, the asymmetric-descent orbit control technology was adopted by offsetting the ma- neuver point, which obtained the orbit control parameters of finite-thrust mode with an iteration algorithm and modified the results with target perilune drift estimation. The Chang＇E-2 satellite declined to the target of 100 km×l5 km orbit successfully on 26 October 2010, and has been flying for 32 circles in the experimental orbit to accomplish the preselected landing area imaging. This paper describes the mechanism and realization method of the asymmetric-descent orbit control technology and evaluates the maneuver effect with the actual mission data.