Dynamic Contrast-Enhanced Perfusion MR Imaging Measurements of Endothelial Permeability: Differentiation between Atypical and Typical Meningiomas

BACKGROUND: AND PURPOSE: The measurement of relative cerebral blood volume (rCBV) and the volume transfer constant (K(trans)) by means of dynamic contrast-enhanced (DCE) perfusion MR imaging (pMRI) can be useful in characterizing brain tumors. The purpose of our study was to evaluate the utility of these measurements in differentiating typical meningiomas and atypical meningiomas. METHODS: Fifteen patients with pathologically confirmed typical meningiomas and seven with atypical meningiomas underwent conventional imaging and DCE pMRI before resection.rCBV measurements were calculated by using standard intravascular

In-line imaging measurements of particle size,velocity and concentration in a particulate two-phase flow

A novel method is developed for in-line measurements of particle size, velocity and concentration in a dilute, particulate two-phase flow based on trajectory image processing. The measurement system consists of a common industrial CCD camera, an inexpensive LED light and a telecentric lens. In this work, the image pre-processing steps include stitching, illumination correction, binarization, denoising, and the elimination of unreal and defocused particles. A top-hat transformation is found to be very effective for the binarization of images with non-uniform background illumination. Particle trajectories measured within a certain exposure time are used to directly obtain particle size and velocity. The particle concentration is calculated by using the statistics of recognized particles within the field of view. We validate our method by analyzing experiments in a gas-droplet cyclone separator. This in-line image processing method can significantly reduce the measurement cost and avoid the data inversion process involved in the light scattering method.

Machine Vision Based Measurement of Dynamic Contact Angles in Microchannel Flows

When characterizing flows in miniaturized channels, the determination of the dynamic contact angle is important. By measuring the dynamic contact angle, the flow properties of the flowing liquid and the effect of material properties on the flow can be characterized. A machine vision based system to measure the contact angle of front or rear menisci of a moving liquid plug is described in this article. In this research, transparent flow channels fabricated on thermoplastic polymer and sealed with an adhesive tape are used. The transparency of the channels enables image based monitoring and measurement of flow variables, including the dynamic contact angle. It is shown that the dynamic angle can be measured from a liquid flow in a channel using the image based measurement system. An image processing algorithm has been developed in a MATLAB environment. Images are taken using a CCD camera and the channels are illuminated using a custom made ring light. Two fitting methods, a circle and two parabolas, are experimented and the results are compared in the measurement of the dynamic contact angles.

AUTOMATED IMAGE MATCHING WITH CODED POINTS IN STEREOVISION MEASUREMENT

A coding-based method to solve the image matching problems in stereovision measurement is presented. The solution is to add and append an identity ID to the retro-reflect point, so it can be identified efficiently under the complicated circumstances and has the characteristics of rotation, zooming, and deformation independence. Its design architecture and implementation process in details based on the theory of stereovision measurement are described. The method is effective on reducing processing data time, improving accuracy of image matching and automation of measuring system through experiments.

Laser triangulation measurement of the level in a coal silo

Laser triangulation theory was used to develop a novel contact-free method for measuring the coal level in a silo under harsh environmental conditions found in coal mines, such as the presence of dense dust, high humidity, and low illumination. A laser source and a camera were mounted at the top of the silo. The laser spot projected into the silo was imaged by the camera. The pinhole imaging principle allows the level to be found from the lateral shift of the spot image on the sensor. A pre-calibrated look-up table of the coal depth versus spot position was used to obtain the depth. The measurement accuracy depends on the step size used during pre-calibration. The actual application of a device designed according to these principles shows that it is easy to implement. The detection of the coal level in a silo at the low illumination level found in coal mines is demonstrated.

Recent Developments of Image Based Measurement Methods for Application to Transonic Flows in Industrial Wind Tunnels

The experimental investigation of unsteady complex flow fields in wind tunnels requires advanced measurement techniques. The most important of such image based measurement techniques are those for the measurement of planar flow velocity fields, planar pressure distribution, model location and deformation, model temperature and quantitative high speed flow visualization. The applications as carried out by DLR range from low speed flows to transonic flows, from high lift configurations to propellers and rotors, from wake vortex investigations in catapult facilities and water towing tanks to investigations of vortex break down phenomena on delta wings. The capability to use image based measurement techniques in transonic flows requires dedicated technical developments and experienced scientists due to the special environment of a transonic wind tunnel. In this paper an overview of the state-of-the art of the application of image based measurement techniques in transonic flows as performed by DLR＇s Institute of Aerodynamics and Flow Technology will be given.

Rapid Measurement of Short Fiber Content on Hertel Sample

This paper offers a new method of measuring short fiber content of cotton fibers. The method is composed of two parts: one is Hertel sampling and the other is image testing. With the help of fiber mixer, a thin and even cotton net is obtained on which we can get Hertel sample by using a sliver clamp. The near micro optical mechanism consists of one large area CCD and one lens with long focus. This mechanism is able to measure every cotton fiber of the test beard accurately and makes it possible to measure accumulating fibers’ amounts. On this base we can calculate short fiber content of cotton, and the experiment results show that this method is efficient.

Study on the Technology of Image Measurement with High Accuracy based on Sobel Operator

According to the basic problem of industrial production, the paper presents a monocular camera and automatic annotation ranging scheme with a ruler. The scheme eliminates a series of complex operation steps frequently used for image location of the calibration, image correction, it has simple implementation and has successfully realized precise ranging by using digital image processing technology. From the beginning of the analysis of image edge detection, edge detection principle and some common edge detection operators, and proposes an improved multi-scale edge detection algorithm, then according to the particularity of the edge proposed new edge thinning algorithm, finally mark the target point through the feature extraction, calculate the final results of fault location.

Internal Flow Field Measurement of Gas Turbine Based on Optical Flow Method

The in-cylinder flow field of the internal combustion engine is an important factor affecting the quality and combustion quality of the fuel mixture in the cylinder. In order to calculate the high-precision flow field, the paper presents a flow field calculation method based on the optical flow algorithm. The motion of the point was calculated using the change in pixel intensity within two temporally adjacent frame images. The results show the high accuracy and resolution of the flow field at small displacement conditions.

Image Distortion Metric Based on Total Bounded Variation

Image definition measurement plays an important role in various image processing applications.And a reliable objective image definition metrics is critical for evaluating the definition of the restored image.In this paper,a novel image distortion metric based on minimal Total Bounded Variation(TBV) is presented.It is clarified that when the restored image approximates to the original clear image,the smaller the TBV is,the better the definition of the restored image is.Furthermore,the difference between the restored image and the original clear image is the smallest when the TBV is minimum.In numerical results,the TBV of the original clear image,blur image and restored image are presented and compared,and the results demonstrate the validity of the distortion metric proposed.

New Monitoring Technologies for Overhead Contact Line at 400 km.h-1

Various technologies have recently been developed for high-speed railways, in order to boost commercial speeds from 300 km.h： to 400 km.h-1. Among these technologies, this paper introduces the 400 km-h-1 class current collection performance evaluation methods that have been developed and demonstrated by Korea. Specifically, this paper reports details of the video-based monitoring techniques that have been adopted to inspect the stability of overhead contact line （OCL） components at 400 km.h-1 without direct contact with any components of the power supply system. Unlike conventional OCL monitoring systems, which detect contact wire positions using either laser sensors or line cameras, the developed system measures parameters in the active state by video data. According to experimental results that were obtained at a field-test site established at a commercial line, it is claimed that the proposed mea- surement system is capable of effectively measuring OCL parameters.

Study and application of monitoring plane displacement of a similarity model based on time-series images

In order to compensate for the deficiency of present methods of monitoring plane displacement in similarity model tests,such as inadequate real-time monitoring and more manual intervention,an effective monitoring method was proposed in this study,and the major steps of the monitoring method include:firstly,time-series images of the similarity model in the test were obtained by a camera,and secondly,measuring points marked as artificial targets were automatically tracked and recognized from time-series images.Finally,the real-time plane displacement field was calculated by the fixed magnification between objects and images under the specific conditions.And then the application device of the method was designed and tested.At the same time,a sub-pixel location method and a distortion error model were used to improve the measuring accuracy.The results indicate that this method may record the entire test,especially the detailed non-uniform deformation and sudden deformation.Compared with traditional methods this method has a number of advantages,such as greater measurement accuracy and reliability,less manual intervention,higher automation,strong practical properties,much more measurement information and so on.

Unsteady flow structure of an airfoil in ground effect

Particle image velocimetry （PIV） experimental results of wake flow structure of a NACA0012 airfoil with small attack angle mounted above water surface are introduced.The experiment was carried out in a small-scale wind-wave tunnel.The diameter of wind-wave tunnel test section is 1.7 m （long） × 0.4 m （width） × 0.4 m （height）.The flow fields around the airfoil were measured under four diffierent conditions by varying the distance between the airfoil and the water surface.The attack angle of the airfoil was kept 10- during the experiment.For each experimental condition,the time series of particle images was captured to calculate continuous evolution of the velocity fields.The velocity fields were ensemble averaged to get the statistic parameters such as mean velocity and vorticity.Typical instantaneous velocity fields for each case are introduced to show the basic flow structure of wind surface flow separation.The aerodynamic loads acting on the airfoil are analyzed qualitatively according to the mean vorticity distribution in the flow field based on the theory of vorticity aerodynamics.The results indicate that the flow structures and drag/lift force of the airfoil alter remarkably with the changing distance between the airfoil and water surface.

Subset-based local vs.finite element-based global digital image correlation:A comparison study

Being the two primary approaches for full-field kinematics measurements, both subset-based local digital image correlation （DIC） and finite element-based global DIC have been extensively studied. Nowadays, most commercial DIC systems employ local DIC algorithm because of its advantages of straight forward principle and higher efficiency. However, several researchers argue that global DIC can provide better displacement results due to the displacement continuity constraint among adjacent elements. As such, thoroughly examining the performance of these two different DIC methods seems to be highly necessary. Here, the random errors associated with local DIC and two global DIC methods are theoretically analyzed at first. Subsequently, based on the same algorithmic details and parameters during analyses of numerical and real experiments, the performance of the different DIC approaches is fairly compared. Theoretical and experimental results reveal that local DIC outperforms its global counterpart in terms of both displacement results and computational efficiency when element （subset） size is no less than 11 pixels.

A convenient look-up-table based method for the compensation of non-linear error in digital fringe projection

Although the structured light system that uses digital fringe projection has been widely implemented in three-dimensional surface profile measurement, the measurement system is susceptible to non-linear error. In this work, we propose a convenient look-up-table-based （LUT-based） method to compensate for the non-linear error in captured fringe patterns. Without extra calibration, this LUT-based method completely utilizes the captured fringe pattern by recording the full-field differences. Then, a phase compensation map is established to revise the measured phase. Experimental results demonstrate that this method works effectively.

Visual detection method of chamfer Ron the root bottom of textile workpiece roller

Roller is an important workpiece of automatic spinning machine. Only if the chamferR on the root bottom of roller＇s guide pillar meets processing accuracy requirement can the end face of one roller＇s guide pillar match the correct position of another roller＇s end face on the guide hole. Therefore, the size of chamfer R on the root bottomof the roller＇s guide pillar has an important influence on the operating state of automatic spinning machine. In order to achieve the rapid, automatic and precise measurement of chamfer R on the root bottom of roller, an auto detection system }＇or roller~ s chamfer based on computer vision technology is proposed. Firstly, the principle of measurement based on computer vision technology is introduced. And then the extraction method of charnfer^s characteristic parameters is presented, which uses image processing technique to obtain these characteristic parameters by means of collected images of roller contour, including extraction of region of interest, extraction of subpixel precise edge, segmentation of arc and line, fittingof geometric primitives, etc. Finally, after experimental verification, the measurement error is within ＋ 5 μm and repeated accuracy is 0.1 pm. The results show that this measurement method is applicable to not only the chamfer on the textile workpiece, but also the workpieces of shaft type with various of sizes.

Comparison of TMI and AMSR-E sea surface temperatures with Argo near-surface temperatures over the global oceans

Satellite-derived sea surface temperatures（SSTs） from the tropical rainfall measuring mission（TRMM）microwave imager（TMI） and the advanced microwave scanning radiometer for the earth observing system（AMSR-E） were compared with non-pumped near-surface temperatures（NSTs） obtained from Argo profiling floats over the global oceans. Factors that might cause temperature differences were examined, including wind speed, columnar water vapor, liquid cloud water, and geographic location. The results show that both TMI and AMSR-E SSTs are highly correlated with the Argo NSTs; however, at low wind speeds, they are on average warmer than the Argo NSTs. The TMI performs slightly better than the AMSR-E at low wind speeds, whereas the TMI SST retrievals might be poorly calibrated at high wind speeds. The temperature differences indicate a warm bias of the TMI/AMSR-E when columnar water vapor is low, which can indicate that neither TMI nor AMSR-E SSTs are well calibrated at high latitudes. The SST in the Kuroshio Extension region has higher variability than in the Kuroshio region. The variability of the temperature difference between the satellite-retrieved SSTs and the Argo NSTs is lower in the Kuroshio Extension during spring. At low wind speeds, neither TMI nor AMSR-E SSTs are well calibrated, although the TMI performs better than the AMSR-E.

A Thorough Evaluation of the Passive Microwave Radiometer Measurements onboard Three Fengyun-3 Satellites

Microwave Radiometer Imager(MWRI) is a key payload of China’s second generation polar meteorological satellite, i.e., Fengyun-3 series(FY-3). Up to now, 5 satellites including FY-3A(2008), FY-3B(2010), FY-3C(2013), FY-3D(2018), and FY-3E(2021) have been launched successfully to provide multiwavelength, all-weather, and global data for decades. Much progress has been made on the calibration of MWRI and a recalibrated MWRI brightness temperature(BT) product(V2) was recently released. This study thoroughly evaluates the accuracy of this new product from FY-3B, 3C, and 3D by using the simultaneous collocated Global Precipitation Measurement(GPM)Microwave Imager(GMI) measurements as a reference. The results show that the mean biases(MBEs) of the BT between MWRI and GMI are generally less than 0.5 K and the root mean squares(RMSs) between them are less than1.5 K. The previous notable ascending and descending difference of the MWRI has disappeared. This indicates that the new MWRI recalibration procedure is very effective in removing potential errors associated with the emission of the hot-load reflector. Analysis of the dependence of MBE on the latitude and earth scene temperature shows that MBE decreases with decreasing latitude over ocean. Furthermore, MBE over ocean decreases linearly with increasing scene temperature for almost all channels, whereas this does not occur over land. A linear regression fitting is then used to modify MWRI, which can reduce the MBE over ocean to be within 0.2 K. The standard deviation of error of GMI, FY-3B, and FY-3D MWRI BT data derived by using the three-cornered hat method(TCH) shows that GMI has the best overall performance over ocean except at 10.65 GHz where its standard deviation of error is slightly larger than that of FY-3D. Over land, the standard deviation of error of FY-3D is the lowest at almost all channels except at 89V. MWRI onboard FY-3 series satellites would serve as an important passive microwave radiometer member of the constellation to monitor key surface and atmospheric properties.

Evaluating a satellite-based sea surface temperature by shipboard survey in the Northwest Indian Ocean

A summer-time shipboard meteorological survey is described in the Northwest Indian Ocean. Shipboard observations are used to evaluate a satellite-based sea surface temperature（SST）, and then find the main factors that are highly correlated with errors. Two satellite data, the first is remote sensing product of a microwave, which is a Tropical Rainfall Measuring Mission Microwave Imager（TMI）, and the second is merged data from the microwave and infrared satellite as well as drifter observations, which is Operational Sea Surface Temperature and Sea Ice Analysis（OSTIA）. The results reveal that the daily mean SST of merged data has much lower bias and root mean square error as compared with that from microwave products. Therefore the results support the necessary of the merging infrared and drifter SST with a microwave satellite for improving the quality of the SST. Furthermore, the correlation coefficient between an SST error and meteorological parameters, which include a wind speed, an air temperature, a relative humidity, an air pressure, and a visibility. The results show that the wind speed has the largest correlation coefficient with the TMI SST error. However, the air temperature is the most important factor to the OSTIA SST error. Meanwhile,the relative humidity shows the high correlation with the SST error for the OSTIA product.

Simultaneous imaging and measurement of tensile stress on cornea by using a common-path optical coherence tomography system with an external contact reference

The objective of this study is to demonstrate that tensile stress resulting due to applied force on cornea can be accurately measured by using a time-domain common-path optical coherence tomography （OCT） system with an external contact reference. The unique design of the common-path OCT is utilized to set up an imaging system in which a chicken eye is placed adjacent to a glass plate serving as the external reference plane for the imaging system. As the force is applied to the chicken eye, it presses against the reference glass plate. The modified OCT image obtained is used to calculate the size of contact area, which is then used to derive the tensile stress on the cornea. The drop in signal levels upon contact of reference glass plate with the tissue are extremely sharp because of the sharp decline in reference power levels itself, thus providing us with an accurate measurement of contact area. The experimental results were in good agreement with the numerical predictions. The results of this study might be useful in providing new insights and ideas to improve the precision and safety of currently used ophthalmic surgical techniques. This research outlines a method which could be used to provide high resolution OCT images and a precise feedback of the forces applied to the cornea simultaneously.