A new kind of Ba-W dispenser cathode impregnated with barium ytterbate has been deve-loped.It has good properties;high coefficient of secondary emission,strong ability of resisting oxygenpoisoning,high thermionic emis...A new kind of Ba-W dispenser cathode impregnated with barium ytterbate has been deve-loped.It has good properties;high coefficient of secondary emission,strong ability of resisting oxygenpoisoning,high thermionic emission current density and more uniform emission on the cathode surface.The cathode is suitable for using as an electron emitter for microwave tubes,especially magnetrons.展开更多
As a matrix for Sc-type impregnated cathode,scandia doped tungsten with a uniform distribution of Sc2O3 was obtained by powder metallurgy combined with the liquid-solid doping method.The microstructure and composition...As a matrix for Sc-type impregnated cathode,scandia doped tungsten with a uniform distribution of Sc2O3 was obtained by powder metallurgy combined with the liquid-solid doping method.The microstructure and composition of the powder and the anti-ion bombardment behavior of scandium in the matrix were studied by means of SEM,EDS,XRD,and in-situ AES methods.Tungsten powder covered with scandium oxide,an ideal scandium oxide-doped tungsten powder for the preparation of Sc-type impregnated cathode,was obtained using the liquid-solid doping method.Compared with the matrix prepared with the mechanically mixed powder of tungsten and scandium oxide,Sc2O3-W matrix prepared with this kind of powder had smaller grain size and uniform distribution of scandium.Sc on the surface of Sc2O3 doped tungsten matrix had good high temperature stability and good anti-ion bombardment capability.展开更多
Solid oxide fuel cell(SOFC) electrodes,after a high temperature sintering,may be impregnated to deposit nanoparticles within their pores to enhance the catalytic function.Samarium doped CeO2(SDC) nanoparticles were in...Solid oxide fuel cell(SOFC) electrodes,after a high temperature sintering,may be impregnated to deposit nanoparticles within their pores to enhance the catalytic function.Samarium doped CeO2(SDC) nanoparticles were infiltrated into(Pr0.7Ca0.3)0.9MnO3-δ(PCM) cathode of anode supported SOFC cells.The cell with 2.6 mg/cm2 SDC impregnated in cathode showed the maximum power density of 580 mW/cm2 compared with 310 mW/cm2 of the cell without impregnation at 850 °C.The cells were also characterized with the impeda...展开更多
The surface of as-prepared LiMn2O4 was modified with ZnO, Al2O3, CoO and LiCoO2 using a simple nitrate melting impregnation method. Transmission electron microscopy （TEM） studies indicated that oxide nano- particles...The surface of as-prepared LiMn2O4 was modified with ZnO, Al2O3, CoO and LiCoO2 using a simple nitrate melting impregnation method. Transmission electron microscopy （TEM） studies indicated that oxide nano- particles in the range of 10～50 nm are coated on the surface of the spinel. The surface modified samples show better capacity retention than the unmodified LiMn2O4 spinel at both room temperature and 55℃. Among these samples, the ZnO-modified LiMn2O4 shows the best combination of a high capacity and a low capacity fading rate of 0.036% per cycle at room temperature and 0.064% per cycle at 55℃. The improvement for surface modified LiMn2O4 can be attributed to the inhibition of Mn dissolution and O losses on the surface.展开更多
文摘A new kind of Ba-W dispenser cathode impregnated with barium ytterbate has been deve-loped.It has good properties;high coefficient of secondary emission,strong ability of resisting oxygenpoisoning,high thermionic emission current density and more uniform emission on the cathode surface.The cathode is suitable for using as an electron emitter for microwave tubes,especially magnetrons.
基金supported by the Program for New Century Excellent Talents in Universities,the National High Technology Research and Development Program of China(No.2006AA03Z524)the National Natural Science Foundation of China(No.50571001).
文摘As a matrix for Sc-type impregnated cathode,scandia doped tungsten with a uniform distribution of Sc2O3 was obtained by powder metallurgy combined with the liquid-solid doping method.The microstructure and composition of the powder and the anti-ion bombardment behavior of scandium in the matrix were studied by means of SEM,EDS,XRD,and in-situ AES methods.Tungsten powder covered with scandium oxide,an ideal scandium oxide-doped tungsten powder for the preparation of Sc-type impregnated cathode,was obtained using the liquid-solid doping method.Compared with the matrix prepared with the mechanically mixed powder of tungsten and scandium oxide,Sc2O3-W matrix prepared with this kind of powder had smaller grain size and uniform distribution of scandium.Sc on the surface of Sc2O3 doped tungsten matrix had good high temperature stability and good anti-ion bombardment capability.
文摘Solid oxide fuel cell(SOFC) electrodes,after a high temperature sintering,may be impregnated to deposit nanoparticles within their pores to enhance the catalytic function.Samarium doped CeO2(SDC) nanoparticles were infiltrated into(Pr0.7Ca0.3)0.9MnO3-δ(PCM) cathode of anode supported SOFC cells.The cell with 2.6 mg/cm2 SDC impregnated in cathode showed the maximum power density of 580 mW/cm2 compared with 310 mW/cm2 of the cell without impregnation at 850 °C.The cells were also characterized with the impeda...
文摘The surface of as-prepared LiMn2O4 was modified with ZnO, Al2O3, CoO and LiCoO2 using a simple nitrate melting impregnation method. Transmission electron microscopy （TEM） studies indicated that oxide nano- particles in the range of 10～50 nm are coated on the surface of the spinel. The surface modified samples show better capacity retention than the unmodified LiMn2O4 spinel at both room temperature and 55℃. Among these samples, the ZnO-modified LiMn2O4 shows the best combination of a high capacity and a low capacity fading rate of 0.036% per cycle at room temperature and 0.064% per cycle at 55℃. The improvement for surface modified LiMn2O4 can be attributed to the inhibition of Mn dissolution and O losses on the surface.
