Effect of In-Service Training Program on the Practice of Healthcare Workers toward Malaria Prevention and Treatment Guidelines during Pregnancy in Health Facilities in Jowhar District, Somalia

Malaria is generally considered a major public health problem in Somalia. Providing early diagnosis and effective treatment is the key element of malaria control strategies in malaria-endemic countries, including Somalia. This required to advocate and ensure health worker’s adherence to the national malaria guidelines at all levels of health care service. A well-designed in-service training program may improve the level of health worker’s adherence to national malaria treatment guidelines, although results have been inconsistent. This is an interventional health facility-based pre and post comparative study aimed to assess the effect of an in-service training program on the practice of healthcare workers toward malaria prevention and treatment guidelines, during in pregnancy in health facilities in Jowhar district, Middle Shabelle region of Somalia. The study was implemented in three phases: pre-intervention phase, intervention phase and post-intervention phase. The sample size consisted of (n = 150) health workers who were selected from ten public health facilities using proportional to size sampling;the data collection adopted in this research is composed of a structured interview questionnaire and observational checklist. Data was analyzed through the application of descriptive statistical analysis that includes frequency and percentage and the Chi-square (x2) test was used to test the associations among variables using SPSS software version 25. The study showed that the level of health workers’ awareness of the national malaria guidelines in the treatment and prevention of malaria in pregnancy was found to be good before the intervention 89 (59.3%) and this proportion increased to 150 (100%) post-intervention of the training program. A significance difference has been observed between health workers’ awareness and their adherence to the malarial guidelines at pre-test and post-test with a p-value 0.000. The proportion of health workers who attended previous training on national malaria guidelines in the treatment and prevention of malaria in pregnancy increased from 46 (30.7%) at the pre-test to 150 (100%) after the post-test. A significant difference was observed in the training status among different categories of health worker and their adherence to the guidelines during the pre- and post-intervention of the training program, with a p-value of 0.000. The result showed that health workers were adhering to the guidelines at the pre-test 33 (22%), this increased after the post-test to 87 (58%). The knowledge of the need to adhere led to an increase in the adherence rate after the training program intervention. The study reveals that inadequate awareness was most reason for the non-adherence in the majority of the health workers as indicated by 89 (59.3%) at the pre-test and 56 (37.3%) in the post-test. However, difference was not significant between the availability of anti-malaria drugs in the facilities and the health workers’ adherence to the guidelines p-value 0.355 at the pretest and p-value 0.258 at post-test. The study concluded that the in-service training program significantly improved health workers’ knowledge and practice to the national malaria guidelines in the treatment, and prevention of malaria in pregnancy. The researcher recommends that the national malaria control programme (NMCP) of the Federal Ministry of Health should provide continuous regular in-service training to frontline healthcare workers at (facility and Community-based) to upgrade their skills and knowledge towards the malaria guidelines, disseminate job aids to the health facilities and undertake regular monitoring to ensure effective implementation of the national malaria treatment guidelines in the treatment and prevention of malaria in pregnancy in achieving desired proper case-management practices of malaria in pregnancy at all levels of health care service.

Research on Training Needs,Training Transfer,and Training Effectiveness of In-Service Teachers in Local Normal Colleges

This study aims to understand the in-service training needs,training transfer,and training effectiveness of teachers in local normal universities in China,while also proposing a continuous professional development plan for teachers.Descriptive research methods were employed,with questionnaires serving as the primary data collection tool.The survey revealed that the educational background of teachers in local normal universities is characterized by an unreasonable distribution of academic qualifications,with a shortage of teachers holding postgraduate and higher degrees.Additionally,the training effectiveness for female teachers was found to be lower than that of male teachers.There is a lack of personalization in training needs,which tends to be more generalized.The transfer effect of training is moderate,and there is a need for further enhancement at the behavioral level of training effectiveness.A continuous professional development plan for teachers has been formulated to improve training effectiveness and promote professional development.

Investigation on welding procedures for in-service pipelines

Some research results are given in this paper about burnthrough and hydrogen cracking with a flowing chamber and a loop. Many factors including plate thickness, running rate, heat input and so forth have been studied. By experiments it can be found that occurrence of hydrogen cracking can be effectively reduced by properly increasing heat input and using the tempering bead technique.

Study on the microstructure and hardness of in-service welded joint of X70 pipeline steel

Hydrogen induced cracking （HIC） is one of the main problems of in-service welding onto active pipeline. Microstructure and hardness of welded joint have a vital effect on hydrogen induced cracking. The microstructure and hardness of welded joint of XTO pipeline steel were studied using simulation in-service welding device. The results show that the main microstructures of in-service welded seam are grain boundary ferrite , intracrystalline acicular ferrite , as well as small amount of widmanztatten structure. The main microstructures of coarse grain heat-affected zone （CGHAZ） are coarse granular bainite, lath ferrite and martensite. Metastable phases such as martensite and lath ferrite are found in CGHAZ because of the too quick cooling velocity a＇nd the hardness of the CGHAZ is high.

FAILURE ANALYSIS AND INSPECTION OF CRACKING OF IN-SERVICE CATALYTIC REGENERATOR

The special subject 'research on life prediction technology of important in-service pressure' mainly analyzes the failure mechanism of large-sized important and criticalin-service pressure vessels under the action of working medium and investigates safety assessmentand life prediction technology with a view to enhance the operation reliability of in-servicepressure vessels in China. Based on a series of accident investigation and test & measuringresearch, the cause of cracking of catalytic regenerator is analyzed and the in-line non-destructiveexamination method and failure prevention measures for the cracking of catalytic regenerator areproposed.

Influence of cooling conditions on X70 pipeline steel in-service welding HAZ

The chamber device was designed and set up to simulate the in-service welding. The results show ： the t8/5 , t8/3 and inner wall peak temperature Tp decrease with the cooling rate increases. The welding energy is carried off by flowing medium, the cooling rate increases, and many unbalanced microstructures such as granular bainite, martensite and M-A generate ; it worsens the properties of HAZ. Under air-cooling, the cooling rate is slow, the austenite grain grows obviously, the lath ferrite crosses the whole austenite, and it causes the hardness value is also big. The change of HAZ width is not obvious with the increase of cooling rate; and burn-through is not susceptible to the cooling rate. The quench microstructures increase and the hydrogen does not outflow from the HAZ easily when increase the cooling rate, so the susceptibility of hydrogen cracking increases.

Non-destructive Testing Robots （NDTBOTs） for In-Service Storage Tank Inspection

Petrochemical storage tanks are generally inspected when the tank is offline mostly to assess the extent of underside corrosion on the tank floor. Emptying, cleaning and opening a tank for inspection take many months and are very expensive. Inspection costs can be reduced significantly by inserting robots through manholes on the tank roof to pertbrm non-destructive testing （NDT）. The challenge is to develop robots that can operate safely in explosive and hazardous environments and measure the thickness of floor plates using ultrasound sensors. This paper reports on the development of a small and inexpensive prototype robot （NDTBOT） which is designed to be intrinsically safe for zone zero operation. The robot ＂hops＂ across the floor to make measurements, without any external moving parts. The paper describes the design, experimental testing of the NDTBOT and presents results of steel plate thickness measurements made under water.

The influence of resistance exercise training prescription variables on skeletal muscle mass,strength,and physical function in healthy adults:An umbrella review

Purpose:The aim of this umbrella review was to determine the impact of resistance training(RT)and individual RT prescription variables on muscle mass,strength,and physical function in healthy adults.Methods:Following Preferred Reporting Items for Systematic Reviews and Meta-Analyses(PRISMA)guidelines,we systematically searched and screened eligible systematic reviews reporting the effects of differing RT prescription variables on muscle mass(or its proxies),strength,and/or physical function in healthy adults aged>18 years.Results:We identified 44 systematic reviews that met our inclusion criteria.The methodological quality of these reviews was assessed using A Measurement Tool to Assess Systematic Reviews;standardized effectiveness statements were generated.We found that RT was consistently a potent stimulus for increasing skeletal muscle mass(4/4 reviews provide some or sufficient evidence),strength(4/6 reviews provided some or sufficient evidence),and physical function(1/1 review provided some evidence).RT load(6/8 reviews provided some or sufficient evidence),weekly frequency(2/4 reviews provided some or sufficient evidence),volume(3/7 reviews provided some or sufficient evidence),and exercise order(1/1 review provided some evidence)impacted RT-induced increases in muscular strength.We discovered that 2/3 reviews provided some or sufficient evidence that RT volume and contraction velocity influenced skeletal muscle mass,while 4/7 reviews provided insufficient evidence in favor of RT load impacting skeletal muscle mass.There was insufficient evidence to conclude that time of day,periodization,inter-set rest,set configuration,set end point,contraction velocity/time under tension,or exercise order(only pertaining to hypertrophy)influenced skeletal muscle adaptations.A paucity of data limited insights into the impact of RT prescription variables on physical function.Conclusion:Overall,RT increased muscle mass,strength,and physical function compared to no exercise.RT intensity(load)and weekly frequency impacted RT-induced increases in muscular strength but not muscle hypertrophy.RT volume(number of sets)influenced muscular strength and hypertrophy.

Surgical intervention combined with weight-bearing walking training promotes recovery in patients with chronic spinal cord injury:a randomized controlled study

For patients with chronic spinal cord injury,the co nventional treatment is rehabilitation and treatment of spinal cord injury complications such as urinary tract infection,pressure sores,osteoporosis,and deep vein thrombosis.Surgery is rarely perfo rmed on spinal co rd injury in the chronic phase,and few treatments have been proven effective in chronic spinal cord injury patients.Development of effective therapies fo r chronic spinal co rd injury patients is needed.We conducted a randomized controlled clinical trial in patients with chronic complete thoracic spinal co rd injury to compare intensive rehabilitation(weight-bearing walking training)alone with surgical intervention plus intensive rehabilitation.This clinical trial was registered at ClinicalTrials.gov(NCT02663310).The goal of surgical intervention was spinal cord detethering,restoration of cerebrospinal fluid flow,and elimination of residual spinal cord compression.We found that surgical intervention plus weight-bearing walking training was associated with a higher incidence of American Spinal Injury Association Impairment Scale improvement,reduced spasticity,and more rapid bowel and bladder functional recovery than weight-bearing walking training alone.Overall,the surgical procedures and intensive rehabilitation were safe.American Spinal Injury Association Impairment Scale improvement was more common in T7-T11 injuries than in T2-T6 injuries.Surgery combined with rehabilitation appears to have a role in treatment of chronic spinal cord injury patients.

Numerical simulation of mechanical properties of straight pipe and elbow during in-service welding

Elbows are the most vulnerable parts in pipeline network systems. The residual stress for in-service welding repair has significant impacts on the mechanical properties of straight pipes and elbows. In this paper,the thermal elastic-plastic finite element method is employed to investigate the mechanical field during the in-service welding. The prediction of residual stress and deformation in the straight pipe and elbow is performed based on the validation of the numerical models. And the effects of the curvature radius and defects on the elbow are investigated. The results show that the residual stress distribution is uneven along various directions after welding. And the mechanical properties of the elbow decrease when the curvature radius is small. Compared to the intact elbow,the residual stress of the elbow with defects concentrates in the defective area. The depth of defect is the main factors affecting the mechanical properties of the elbow. A systematic analysis of the mechanical properties of straight pipes and elbows is proposed to provide guidance to the in-service welding.

Numerical simulation of stress and deformation of in-service welding onto gas pipeline

SYSWELD was used to simulate in-service welding process of gas pipeline of X70 pipeline steel. Welding thermal cycle, stress and deformation of in-service welded joint were studied. The results show that peak temperature of coarse grain heat-affected zone （CGHAZ） of in-service welding onto gas pipeline is the same with routine welding, but ts/5, ts/3 and ts/1 decrease at certain degree. For the zone near welded seam, axial stress and hoop stress in the inner pipe wall are compressive stress when welding source passes through the cross-section that is studied, but residual axial stress and residual hoop stress after welded are all tensile stress. Transient deformation and residual deformation are all convex deformation compared with the original pipe diameter size. Deformation achieves maximum when welding thermal source passes through the cross-section that is studied and then decreases during the cooling process after welding.

Influence of pipe parameters and heat input on thermal cycle of in-service welding onto active gas pipeline

The software of SYSWELD was used to build model and simulate thermal cycle of in-service welding onto active gas pipeline. Influence of pipe diameter, wall thickness and heat input on thermal cycle was studied. The results show that t8/5 , t8/3 and peak temperature of inner surface decrease when wall thickness increases from 5 mm to 12 mm. But t8/1 will increases with the increase of wall thickness and will decrease after the wall thickness is larger than 7 mm. Pipe diameter has little influence on thermal cycle and that influence can be ignored when pipe diameter is greater than 273 mm. t8/5 , t8/3 , t8/1 and peak temperature of inner surface will increase with the increase of heat input.

Application value research of swallowing treatment device combined with swallowing rehabilitation training in the treatment of swallowing disorders after stroke

BACKGROUND Stroke is a common disabling disease,whether it is ischemic stroke or hemorrhagic stroke,both can result in neuronal damage,leading to various manifestations of neurological dysfunction.AIM To explore of the application value of swallowing treatment device combined with swallowing rehabilitation training in the treatment of swallowing disorders after stroke.METHODS This study selected 86 patients with swallowing disorders after stroke admitted to our rehabilitation department from February 2022 to December 2023 as research subjects.They were divided into a control group(n=43)and an observation group(n=43)according to the treatment.The control group received swallowing rehabilitation training,while the observation group received swallowing treatment device in addition to the training.Both groups underwent continuous intervention for two courses of treatment.RESULTS The total effective rate in the observation group(93.02%)was higher than that in the control group(76.74%)(P=0.035).After intervention,the oral transit time,swallowing response time,pharyngeal transit time,and laryngeal closure time decreased in both groups compared to before intervention.In the observation group,the oral transit time,swallowing response time,and pharyngeal transit time were shorter than those in the control group after intervention.However,the laryngeal closure time after intervention in the observation group was compared with that in the control group(P=0.142).After intervention,average amplitude value and duration of the genioglossus muscle group during empty swallowing and swallowing 5 mL of water are reduced compared to before intervention in both groups.After intervention,the scores of the chin-tuck swallowing exercise and the Standardized Swallowing Assessment are both reduced compared to pre-intervention levels in both groups.However,the observation group scores lower than the control group after intervention.Additionally,the Functional Oral Intake Scale scores of both groups are increased after intervention compared to pre-intervention levels,with the observation group scoring higher than the control group after intervention(P<0.001).The cumulative incidence of complications in the observation group is 9.30%,which is lower than the 27.91%in the control group(P=0.027).CONCLUSION The combination of swallowing therapy equipment with swallowing rehabilitation training can improve the muscle movement level of the genioglossus muscle group,enhance swallowing function,and prevent the occurrence of swallowing-related complications after stroke.

Numerical analysis of moving train induced vibrations on tunnel,surrounding ground and structure

This study is focused on the effect of vibration induced by moving trains in tunnels on the surrounding ground and structures.A three-dimensional finite element model is established for a one-track railway tunnel and an adjacent twelve-storey building frame by using commercial software Midas GTS-NX(2019)and Midas Gen.This study considered the moving load effect of a complete train,which varies with space as well as with time.The effect of factors such as train speed,overburden pressure on the tunnel and variation in soil properties are studied in the time domain.As a result,the variations in horizontal and vertical acceleration for two different sites,i.e.,the free ground surface(without structure)and the area containing the structure,are compared.Also,the displacement pattern of the raft foundation is plotted for different train velocities.At lower speeds,the heaving phenomenon is negligible,but as the speed increases,both the heaving and differential settlement increase in the foundation.This study demonstrates that the effect of moving train vibrations should be considered in the design of new nearby structures and proper ground improvement should be considered for existing structures.

Investigation and Analysis of Continuing Nursing Education Status and Needs of In-Service Nurses in Tibet

Objective: To investigate and analyze the current status of continuing nursing education (CNE) of in-service nurses in Tibet and their demand for continuing education. Methods: 663 active nurses in Tibet were taken as the research objects, and the self-developed questionnaire was used to investigate the current status and needs of CNE, and the correlation between the CNE needs of active nurses and their personal conditions was analyzed. Results: This study shows that 65.61% (435/663) of active nurses have not participated in any CNE, and 91.86% (609/663) of active nurses believe that they need to participate in CNE. The problems faced by active nurses in participating in CNE include funding restrictions, time limitation and ability limitation. Logistic stepwise regression analysis reveals that the age of active nurses and working years of nurses are negatively correlated with the funding restrictions for participating in CNE (P < 0.05). It is relatively more difficult for young nurses with less working experience to obtain funding for participating in CNE. Moreover, there is a negative correlation between age, educational level and the ability of nurses to participate in CNE (P < 0.05). Younger nurses with lower educational level are more difficult to participate in CNE due to personal ability. There is a positive correlation between the length of working experience and the time limitation faced to participate in CNE (P < 0.05). Senior nurses are too busy with their work to participate in CNE due to limited time. Conclusion: The problems faced by active nurses in Tibet in participating in CNE come from funding, time and ability. Young nurses with limited working experience cannot participate in CNE resulting from limited ability and funds;while senior nurses are mainly restricted by time. It is recommended that hospitals and nursing management in Tibet should solve these problems faced by nurses in participating in CNE by implementing a flexible scheduling system, and providing funding or implementing an incentive system, to enhance the confidence of active nurses in participating in CNE.

In-service Structural Health Monitoring of a Full-scale Composite Horizontal Tail

In-service structural health monitoring（SHM） technologies are critical for the utilization of composite aircraft structures. We developed a Lamb wave-based in-service SHM technology using built-in piezoelectric actuator/sensor networks to monitor delamination extension in a full-scale composite horizontal tail. The in-service SHM technology combine of damage rapid monitoring（DRM） stage and damage imaging diagnosis（DID） stage allows for real-time monitoring and long term tracking of the structural integrity of composite aircraft structures. DRM stage using spearman rank correlation coeffi cient was introduced to generate a damage index which can be used to monitor the trend of damage extension. The DID stage based on canonical correlation analysis aimed at intuitively highlighting structural damage regions in two-dimensional images. The DRM and DID stages were trialed by an in-service SHM experiment of CFRP T-joint. Finally, the detection capability of the in-service SHM technology was verified in the SHM experiment of a full-scale composite horizontal tail. Experimental results show that the rapid monitoring method effectively monitors the damage occurrence and extension tendency in real time; damage imaging diagnosis results are consistent with those from the failure model of the composite horizontal tail structure.

NeTrainSim:a network-level simulator for modeling freight train longitudinal motion and energy consumption

Although train modeling research is vast, most available simulation tools are confined to city-or trip-scale analysis, primarily offering micro-level simulations of network segments. This paper addresses this void by developing the Ne Train Sim simulator for heavy long-haul freight trains on a network of multiple intersecting tracks. The main objective of this simulator is to enable a comprehensive analysis of energy consumption and the associated carbon footprint for the entire train system. Four case studies were conducted to demonstrate the simulator's performance. The first case study validates the model by comparing Ne Train Sim output to empirical trajectory data. The results demonstrate that the simulated trajectory is precise enough to estimate the train energy consumption and carbon dioxide emissions. The second application demonstrates the train-following model considering six trains following each other. The results showcase the model ability to maintain safefollowing distances between successive trains. The next study highlights the simulator's ability to resolve train conflicts for different scenarios. Finally, the suitability of the Ne Train Sim for modeling realistic railroad networks is verified through the modeling of the entire US network and comparing alternative powertrains on the fleet energy consumption.

Research and Practice of Cardiopulmonary Rehabilitation Training Programs

In today’s society, the incidence of cardiopulmonary diseases is increasing annually, seriously affecting patients’ quality of life. Therefore, developing a scientific and effective rehabilitation training program is of great significance. This study first analyzes the theoretical basis of cardiopulmonary rehabilitation training, including the effects of aerobic exercise, interval training, and strength training on cardiopulmonary function. Based on this, a comprehensive rehabilitation training program is designed, which includes personalized training plans, comprehensive interventions, multidisciplinary collaboration, patient education, and regular follow-up visits. The cardiopulmonary rehabilitation training plan developed in this study has certain scientific practicability, which provides a theoretical basis for cardiopulmonary rehabilitation training, and also provides a reference for medical institutions, rehabilitation centers and communities, which is helpful for promotion and application to a wider range of patients with cardiopulmonary diseases.

GeoNER:Geological Named Entity Recognition with Enriched Domain Pre-Training Model and Adversarial Training

As important geological data,a geological report contains rich expert and geological knowledge,but the challenge facing current research into geological knowledge extraction and mining is how to render accurate understanding of geological reports guided by domain knowledge.While generic named entity recognition models/tools can be utilized for the processing of geoscience reports/documents,their effectiveness is hampered by a dearth of domain-specific knowledge,which in turn leads to a pronounced decline in recognition accuracy.This study summarizes six types of typical geological entities,with reference to the ontological system of geological domains and builds a high quality corpus for the task of geological named entity recognition(GNER).In addition,Geo Wo BERT-adv BGP(Geological Word-base BERTadversarial training Bi-directional Long Short-Term Memory Global Pointer)is proposed to address the issues of ambiguity,diversity and nested entities for the geological entities.The model first uses the fine-tuned word granularitybased pre-training model Geo Wo BERT(Geological Word-base BERT)and combines the text features that are extracted using the Bi LSTM(Bi-directional Long Short-Term Memory),followed by an adversarial training algorithm to improve the robustness of the model and enhance its resistance to interference,the decoding finally being performed using a global association pointer algorithm.The experimental results show that the proposed model for the constructed dataset achieves high performance and is capable of mining the rich geological information.

Attack-Resilient Distributed Cooperative Control of Virtually Coupled High-Speed Trains via Topology Reconfiguration

Dear Editor,This letter addresses the resilient distributed cooperative control problem of a virtually coupled train convoy under stochastic disturbances and cyber attacks.The main purpose is to achieve distributed coordination of virtually coupled high-speed trains with the prescribed inter-train distance and same cruise velocity.