Research progress and application of deep in-situ condition preserved coring and testing

With the depletion of shallow resources,the exploration of deep earth resources has become a global strategy.The study of the different patterns in the physical mechanical properties of rocks at different occurrence depths is the basis for exploring deep into the earth,with the core and premise being the acquisition and testing of deep in-situ core specimens.Based on the original idea of deep in-situ condition preserved coring(ICP-Coring)and testing,combined with theoretical modeling,numerical analysis,test platform development,indoor testing and engineering application,the principles and technologies of deep ICP-Coring are developed.This principle and technology consists of five parts:in-situ pressurepreserved coring(IPP-Coring),in-situ substance-preserved coring(ISP-Coring),in-situ temperaturepreserved coring(ITP-Coring),in-situ light-preserved coring(ILP-Coring),and in-situ moisturepreserved coring(IMP-Coring).The theory and technology of temperature and pressure reconstruction at different occurrence depths and in different environments are proposed,and prototype trial production was completed by following the principle of displacement and tests based on the in-situ reconstructed environment.The notable advances are as follows:(1)Deep in-situ coring system:A pressure-preserved controller with an ultimate bearing capacity greater than 140 MPa,highperformance(temperature-resistant,pressure-resistant,and low thermally conductive)temperaturepreserved materials,an active temperature control system,and high-barrier quality-preserved membrane materials were developed;a deep ICP-Coring capacity calibration platform was independently developed,a deep in-situ coring technology system was developed,and the acquisition of deep in-situ cores was realized.(2)In-situ storage displacement system:Following the dual-circuit hydraulic design idea,a single-drive source push-pull composite grabbing mechanism was designed;the design of the overall structure for the deep in-situ displacement storage system and ultrahigh pressure cabin structure was completed,which could realize docking the coring device and core displacement in the in-situ reconstructed environment.(3)Test analysis system:A noncontact acoustic-electric-magnetic test system was developed under the in-situ reconstructed environment,and the errors between the test results and traditional contact test results were mostly less than 10%;a detachable deep in-situ core true triaxial test system was developed,which could perform loading tests for deep in-situ cores.The relevant technological achievements were successfully applied to the exploration and development of deep resources,such as deep mines,deep-sea natural gas hydrates,and deep oil and gas.The research results provide technical and equipment support for the construction of a theoretical system for deep in-situ rock mechanics,the development of deep earth resources and energy,and the scientific exploration of different layers and occurrence depths(deep and ultradeep)of the Earth.

Mechanical properties and supporting effect of CRLD bolts under static pull test conditions

A device for supporting soft rock masses combined with a constant resistance structure characterized by constant resistance and large deformation at the end of a steel bar, known as the constant resistance and large deformation（CRLD） bolt, has recently been developed to counteract soft rock swelling that often occurs during deep mining. In order to further study the mechanical properties of the CRLD bolt, we investigated its mechanical properties by comparison with the conventional strength bolt（rebar） using static pull tests on many aspects, including supporting capacity, elongation, radial deformation, and energy absorption. The tests verified that the mechanical defects of the rebar, which include the decrease of bolt diameter, reduction of supporting capacity, and emergence and evolution of fracture until failure during the whole pull process, were caused by the Poisson＇s ratio effect. Due to the special structure set on the CRLD bolt, the bolt presents a seemingly unusual phenomenon of the negative Poisson＇s ratio effect, i.e., the diameter of the constant resistance structure increases while under-pulling. It is the very effect that ensures the extraordinary mechanical properties, including high resistance, large elongation, and strong energy absorption. According to the comparison and analysis of numerical simulation and field test, we can conclude that the CRLD bolt works better than the rebar bolt.

Research on in-situ condition preserved coring and testing systems

As shallow resources are increasingly depleted,the mechanics'theory and testing technology of deep insitu rock has become urgent.Traditional coring technologies obtain rock samples without retaining the in-situ environmental conditions,leading to distortion of the measured parameters.Herein,a coring and testing systems retaining in-situ geological conditions is presented:the coring system that obtains in-situ rock samples,and the transfer and testing system that stores and analyzes the rocks under a reconstructed environment.The ICP-Coring system mainly consists of the pressure controller,active insulated core reactor and insulation layer and sealing film.The ultimate bearing strength of 100 MPa for pressurepreservation,temperature control accuracy of 0.97%for temperature-retained are realized.CH_(4)and CO permeability of the optimized sealing film are as low as 3.85 and 0.33 ppm/min.The average tensile elongation of the film is 152.4%and the light transmittance is reduced to 0%.Additionally,the pressure and steady-state temperature accuracy for reconstructing the in-situ environment of transfer and storage system up to 1%and±0.2 is achieved.The error recorded of the noncontact sensor ring made of lowdensity polymer is less than 6%than that of the contact test.The system can provide technical support for the deep in-situ rock mechanics research,improving deep resource acquisition capabilities and further clarifying deep-earth processes.

Assessment of rapid impact compaction in ground improvement from in-situ testing

Ground improvement has been used on many construction sites to densify granular materials, in other word, to improve soil properties and reduce potential settlement. This work presents a case study of ground improvement using rapid impact compaction （RIC）. The research site comprises the construction of workshop and depots as part of railway development project at Batu Gajah-Ipoh, Malaysia. In-situ testing results show that the subsurface soil comprises mainly of sand and silty sand through the investigated depth extended to 10 m. Groundwater is approximately 0.5 m below the ground surface. Evaluation of improvement was based on the results of pre- and post-improvement cone penetration test （CPT）. Interpretation software has been used to infer soil properties. Load test was conducted to estimate soil settlement. It is found that the technique succeeds in improving soil properties namely the relative density increases from 45% to 70%, the friction angle of soil is increased by an average of 3°, and the soil settlement is reduced by 50%： The technique succeeds in improving soil properties to approximately 5.0 m in depth depending on soil uniformity with depth.

In-Situ Test on Fatigue Characteristics of Top-Mounted Dividable Pile-Board Subgrade for High-Speed Railway

To simulate the fatigue characteristics of the pile-board structure under long-term dynamic load, using the in-situ dynamic testing system DTS-1, the forced vibration loading was repeated one million times at different cross-sections of the pile-board structure for high-speed railway. The dynamic deformation, permanent deformation and dynamic stress of main reinforcements were measured. The test results show that the dynamic responses of the pile-board structure almost did not vary with the forced vibration times under the simulated trainload. After one million times of forced vibration, the permanent deformations of the midspan section of intermediate span and midspan section of side span were 0.7 mm and 0. 6 mm, respectively, and there was no accumulative plastic deformation at the bearing section of intermediate span.

Effects of temperature and wavelength choice on in-situ dissolution test of Cimetidine tablets

The effects of temperature and wavelength choice on in-situ dissolution test instrument of Cimetidine were studied. Absorbance （A）〈 1.0 is required when using a fiber-optic dissolution test system. The detection wavelength of 2 （218 nm） was replaced by 244 nm to carry out this test. The absorbance of Cimetidine solution at different temperature showed an obvious change. Calibration of Cimetidine solution should be tested at the same temperature （37° C） with the test solution. A suitable wavelength with smaller tangent slope could be chosen for in-situ dissolution test of Cimetidine tablets.

Characterization of microstructure and strain response in Ti-6Al-4V plasma welding deposited material by combined EBSD and in-situ tensile test

Additive layer manufacturing （ALM） of aerospace grade titanium components shows great promise in supplying a cost-effective alternative to the conventional production routes. Complex microstructures comprised of columnar remnants of directionally solidifiedβ-grains, with interior inhabited by colonies of finerα-plate structures, were found in samples produced by layered plasma welding of Ti-6Al-4V alloy. The application of in-situ tensile tests combined with rapid offline electron backscatter diffraction （EBSD） analysis provides a powerful tool for understanding and drawing qualitative correlations between microstructural features and deformation characteristics. Non-uniform deformation occurs due to a strong variation in strain response between colonies and across columnar grain boundaries. Prismatic and basal slip systems are active, with the prismatic systems contributing to the most severe deformation through coarse and widely spaced slip lines. Certain colonies behave as microstructural units, with easy slip transmission across the entire colony. Other regions exhibit significant deformation mismatch, with local build-up of strain gradients and stress concentration. The segmentation occurs due to the growth morphology and variant constraints imposed by the columnar solidification structures through orientation relationships, interface alignment and preferred growth directions. Tensile tests perpendicular to columnar structures reveal deformation localization at columnar grain boundaries. In this work connections are made between the theoretical macro- and microstructural growth mechanisms and the observed microstructure of the Ti-6Al-4V alloy, which in turn is linked to observations during in-situ tensile tests.

Research of in-situ hydraulic test method by using double packer equipment

Double packer equipment for hydraulic test can be used to measure pressure of test zone directly, and it is frequently used to perform many kinds of hydraulic tests and take groundwater sample from borehole. The test method of this equipment mainly includes the test design, implementation, interpretation and synthetic analysis. By adopting the double packer equipment for hydraulic test, the parameter distribution of rock permeability along borehole can be acquired, as well as the connectivity, water conductivity and water bearing capacity of the disclosed structure and the chemical characteristics of the deep groundwater. It is a necessary method for the research and evaluation of the complex hypotonicity terrace site selection under geological conditions. This method is not only suitable for the geological disposal of high level radioactive waste, but also can be used in the site selection of underground facilities such as storage of petroleum and carbon dioxide. Meanwhile, it has a good application prospect in other hydrogeological investigation fields.

Laboratory pull-out tests on fully grouted rock bolts and cable bolts:Results and lessons learned

Laboratory pull-out tests were conducted on the following rock bolts and cable bolts:steel rebars,smooth steel bars,fiberglass reinforced polymer threaded bolts,flexible cable bolts,IR5/IN special cable bolts and Mini-cage cable bolts.The diameter of the tested bolts was between 16 mm and 26 mm.The bolts were grouted in a sandstone sample using resin or cement grouts.The tests were conducted under either constant radial stiffness or constant confining pressure boundary conditions applied on the outer surface of the rock sample.In most tests,the rate of displacement was about 0.02 mm/s.The tests were performed using a pull-out bench that allows testing a wide range of parameters.This paper provides an extensive database of laboratory pull-out test results and confirms the influence of the confining pressure and the embedment length on the pull-out response(rock bolts and cable bolts).It also highlights the sensitivity of the results to the operating conditions and to the behavior of the sample as a whole,which cannot be neglected when the test results are used to assess the bolt-grout or the grouterock interface.

Discussion on bearing capacity of soft rock ground based on in-situ load test

The suitability of five methods was discussed here,taking the typical results from in-situ load test of Renshou Mansion and Caifu Plaza in Yueyang City for example.It shows that bearing capacity can be obtained by the proportion load and limit load from p-s curve with the first and the second point of contraflexure easily.It is recommended that the accurate value of bearing capacity can be obtained by hyperbola fitting method and minimum curvature radius method theoretically.The rebound method is clear in principle,in which the elastoplasticity characteristic is thought about.Out of consideration for the unsteadiness and unobviousness of bearing capacity from relative settlement method,it can be only adopted as reference.So bearing capacity of soft rock ground should be determined by weathering condition of soft rock and curve type.

Study on determination method of in-situ stress using formation fracturing test and Kaiser effect method

A new method, which is based on formation fracturing test and Kaiser effect method, has been developed for confirming the oilfield in-situ stress in this paper. The new method has been used in a certain oilfield of China and the determined oilfield in-situ stresses is more accurate than that based on one single method.

Design and feasibility analysis of a new completion monitoring technical scheme for natural gas hydrate production tests

As a prerequisite and a guarantee for safe and efficient natural gas hydrates(NGHs)exploitation,it is imperative to effectively determine the mechanical properties of NGHs reservoirs and clarify the law of the change in the mechanical properties with the dissociation of NGHs during NGHs production tests by depressurization.Based on the development of Japan’s two offshore NGHs production tests in vertical wells,this study innovatively proposed a new subsea communication technology-accurate directional connection using a wet-mate connector.This helps to overcome the technical barrier to the communication between the upper and lower completion of offshore wells.Using this new communication technology,this study explored and designed a mechanical monitoring scheme for lower completion(sand screens).This scheme can be used to monitor the tensile stress and radial compressive stress of sand screens caused by NGHs reservoirs in real time,thus promoting the technical development for the rapid assessment and real-time feedback of the in-situ mechanical response of NGHs reservoirs during offshore NGHs production tests by depressurization.

Test-retest strength reliability of the Electronic Push/Pull Dynamometer (EPPD) in the measurement of the quadriceps and hamstring muscles on a new chair

Background: Test-retest strength reliability of the Electronic Push/Pull Dynamometer (EPPD) in the measurement of the extensor and flexor muscles on a new constructed chair. The objective of the study was to assess reliability of Electronic Push/Pull Dynamometer in the measurement of the knee flexion and extension at 90° and 60° on a new constructed chair. The aims of the author: To assess reliability of Electronic Push/Pull Dynamometer in the measurement of the knee flexion and extension at 90° and 60° on a new constructed chair. Design: A test-retest reliability study. Subjects: One hundred healthy students male and female (mean age, 21y). Methods: Maximum isometric strength of the quadriceps and hamstring muscle groups was measured using the EPPD were recorded at 60° and 90° for 3 trials on 2 occasions. Reliability was assessed with the Intraclass correlation coefficient (ICC), mean and standard deviation (SD) of measurements, and smallest real differences were calculated for the maximum and for the mean and work of the 3 repetitions. Results: Mean strength ranged from 50.44 kg for knee flexion to 55.76 kg for knee extension 50.44 kg to 61.98 kg at 90° hip flexion. Test-retest reliability Intraclass correlation coefficients (ICCs) ranged from 0.85 to 0.99. ICCs for test-retest reliability ranged from 0.780 to 0.998. Conclusions: The results of the reliability study indicate that the EPPD in reliable dynamometer to use in determining lower limb muscle force production. It can be used to measure disease progression and to evaluate changes in knee extension and flexion strength at the individual patient level.

循环张拉作用下新型多节泡土钉抗拔性能现场试验研究

新型多节泡土钉具有拉拔硬化特征,相比传统土钉,其在土质边坡中抗拔性能更优。为了探究实际工况条件下新型多节泡土钉的边坡加固性能,并与传统土钉进行比较,开展7组新型多节泡土钉及传统土钉现场循环张拉试验,研究注浆工艺、节泡间距及埋深对土钉抗拔力及其发挥速率的影响规律,进而探明了每一循环下土钉弹、塑性拉拔位移占比,并分析其内在机理。试验结果表明:循环张拉作用下,注浆工艺对土钉的抗拔力影响显著,采用改进式压密注浆工艺和直接压密注浆工艺的土钉抗拔力远远超出传统注浆工艺,且初期的拉拔硬化现象更明显。采用改进式压密注浆工艺的土钉抗拔力发挥速率最快,直接压密注浆工艺次之,传统注浆工艺最小。从总体趋势上看,新型多节泡土钉抗拔力发挥速率在降低,传统土钉抗拔力发挥速率在升高。采用改进式压密注浆工艺虽然不能提升土钉弹性拉拔位移的占比,却能显著提高极限抗拔力;节泡间距对多节泡土钉抗拔力和抗拔力发挥速率影响较小,主要受到土钉周围土体强度的影响;埋深影响多节泡土钉的极限抗拔力,埋深越大,极限抗拔力和初始抗拔力发挥速率越大,同时抗拔力发挥速率随拉拔位移递减的趋势也更加明显。研究成果对提高新型多节泡土钉加固性能和优化工程应用提供指导。

BFRP筋回收轮胎钢纤维混凝土黏结性能分析

对玄武岩纤维增强复合材料(BFRP)筋在回收轮胎钢纤维(RTSF)混凝土中的黏结性能进行了试验和分析研究.对不同RTSF体积掺量、BFRP筋直径和嵌入长度的试件进行了拉拔试验,研究其对黏结破坏模式、黏结滑移响应和黏结强度的影响,并提出了BFRP筋RTSF混凝土的黏结滑移理论模型.结果表明:BFRP筋RTSF混凝土黏结破坏类型包括拔出破坏、劈裂破坏以及拔出且劈裂破坏;BFRP筋直径对黏结破坏模式无显著影响,而RTSF体积掺量、BFRP筋直径和嵌入长度均对黏结强度有较大影响,且RTSF体积掺量与极限黏结强度呈正相关,BFRP筋直径和嵌入长度对其影响与之相反;当RTSF体积掺量从0增大至1.5%时,其极限黏结强度最大可提高约23.87%.与已有模型相比,所提出的黏结滑移理论模型对BFRP筋RTSF混凝土的黏结滑移曲线具有更高的拟合精度.

HRB635级高强钢筋与C70高强混凝土黏结锚固性能试验研究

目的 研究HRB635级高强钢筋与C70高强混凝土之间黏结锚固性能,为工程应用提供参考。方法 设计制作了5组45个直锚试件进行拉拔试验,分析了锚固长度、配箍率、混凝土保护层厚度等因素对锚固性能的影响。结果 试件极限承载力随配箍率和锚固长度的增加而增加,但当箍筋率ρsv大于1.26%,锚固长度la大于15d后,配箍率和锚固长度的增加不再对试件极限承载力产生明显的影响;对于未配置箍筋的试件,当试件保护层厚度从2d增加到3d时,试件极限承载力随着保护层厚度的增加而增加,但当保护层厚度大于3d后,保护层厚度的增加对试件极限承载力基本没有影响。结论 在进行HRB635级高强钢筋和C70高强混凝土试件设计时,锚固长度可按《混凝土结构设计规范》(GB 50010-2010)中相关公式进行计算,且具有足够的安全储备。

不同老化方式下新旧沥青的扩散融合

分别制备了热氧老化沥青和热氧-紫外老化沥青,构建了新、旧沥青双层扩散模型,并且通过相对浓度与扩散系数的模拟计算、拉拔试验与荧光显微镜试验研究了新、旧沥青扩散融合程度与温度、沥青四组分的关系.结果表明:热氧-紫外老化沥青更不易与基质沥青扩散融合,与基质沥青的黏附性较差;在10~40℃内,新、旧沥青能够快速扩散融合,超过40℃后,升高温度对扩散融合的促进作用逐渐减小,且对热氧-紫外老化沥青与基质沥青的扩散融合促进作用的减小速率更大;沥青四组分扩散系数的大小顺序依次为:饱和分>芳香分≥胶质>沥青质,经紫外老化后,四组分的扩散系数均有所下降,沥青质的降幅最大.

BFRP筋与再生骨料混凝土粘结性能试验研究

为探究玄武岩纤维筋(BFRP筋)与再生骨料混凝土的粘结性能,对其进行中心拔出试验。基于试验结果,探究了其破坏形态以及粘结机理,研究再生混凝土强度等级、筋材直径和再生骨料替代率对BFRP筋和再生骨料混凝土粘结性能影响。结果表明,BFRP筋与再生骨料混凝土粘结有拔出破坏和劈裂破坏两种破坏形态;BFRP筋与再生骨料混凝土粘结滑移曲线可分为微滑移段、滑移段、下降段和残余应力段;提高再生混凝土的强度等级可以延缓混凝土内部裂缝的产生与演化,进一步提高BFRP筋表面肋与混凝土之间的机械咬合作用,增大BFRP筋与再生混凝土的粘结强度;因剪力滞后效应,BFRP筋与再生骨料混凝土的粘结强度随着BFRP筋直径的增加而降低;再生骨料替代率的增加会对BFRP筋和再生骨料混凝土的粘结应力产生不利影响。

沙漠砂混凝土与钢筋黏结性能试验研究

在我国西部沙漠砂资源丰富的背景下,探究沙漠砂对钢筋与混凝土黏结性能的影响,制作中心拉拔试验,通过对不同沙漠砂取代率和不同粉煤灰掺量下的钢筋与混凝土的黏结强度进行试验研究。根据黏结滑移曲线,分析沙漠砂取代率和粉煤灰掺量对钢筋和混凝土黏结强度、极限位移、破坏模式的影响。研究结果表明:直径16 mm钢筋混凝土试件在锚固长度较短导致脆性劈裂破坏的情况下,钢筋与混凝土的黏结强度随沙漠砂取代率的增加呈先上升后下降的趋势;粉煤灰掺量为20%时,对两者的黏结强度提升最大。

基于拉拔试验的加筋土界面摩擦特性

加筋土具有良好的工程性能,被广泛应用于加固路基和边坡支挡等领域,筋土界面摩擦强度对支挡结构的整体性和稳定性具有重要影响.为研究不同加筋土的界面摩擦特性,自制拉拔装置,对黏土-土工格栅、黏土-碳纤维布、黏土-土工格室和碎石土-土工格室等4种加筋土进行拉拔试验.研究结果表明,4种加筋土中,土工格室与碎石土的界面摩擦强度最高,构成的加筋体承受变形的能力最强;黏土-碳纤维布构成的加筋体界面摩擦强度最低,但具有筋土间相互作用发挥较快、允许变形小的特点;不同加筋体的允许变形差别较大,在实际工程中应充分考虑.提出了一种考虑土工格室加强区的无黏性土-土工格室界面最大摩阻力计算理论模型,研究结果可为加筋土工程筋材选取提供参考.