In order to study the characteristics of cold frontal motion over the arbitrary topography, the velocity of cold frontal movement is derived by using the one layer shallow-water model. The results show that there exis...In order to study the characteristics of cold frontal motion over the arbitrary topography, the velocity of cold frontal movement is derived by using the one layer shallow-water model. The results show that there exist the retardation in upwind side and rapid descent in the lee slope when the cold front crosses the topography.展开更多
The modified shear lag model proposed recently was applied to calculate thermal residual stresses and subsequent stress distributions under tensile and compressive loadings. The expressions for the elastic moduli and ...The modified shear lag model proposed recently was applied to calculate thermal residual stresses and subsequent stress distributions under tensile and compressive loadings. The expressions for the elastic moduli and the yield strengths under tensile and compressive loadings were derived which take account of thermal residual stresses. The asymmetries in the elastic modulus and the yield strength were interpreted using the derived expressions and the obtained results of the stress calculations. The model predictions have exhibited good agreements with the experimental results and also with the other theoretical predictions展开更多
In this work,the influence of heat treatment on Polyamide-1010 structure of aggregation state was studied by using WAXD and SAXS techniques.The results showed that the best crystallinity was obtained nearby T=175℃ fo...In this work,the influence of heat treatment on Polyamide-1010 structure of aggregation state was studied by using WAXD and SAXS techniques.The results showed that the best crystallinity was obtained nearby T=175℃ for Polyamide-1010 samples with various annealing treatment.Through extrapolating method,the Tg obtained was approximately 58℃.Based on the one-dimensional electron density correlation function of partially crystalline polymers,some structural parameters of Polyamide-1010 were determined by SAXS.展开更多
文摘In order to study the characteristics of cold frontal motion over the arbitrary topography, the velocity of cold frontal movement is derived by using the one layer shallow-water model. The results show that there exist the retardation in upwind side and rapid descent in the lee slope when the cold front crosses the topography.
文摘The modified shear lag model proposed recently was applied to calculate thermal residual stresses and subsequent stress distributions under tensile and compressive loadings. The expressions for the elastic moduli and the yield strengths under tensile and compressive loadings were derived which take account of thermal residual stresses. The asymmetries in the elastic modulus and the yield strength were interpreted using the derived expressions and the obtained results of the stress calculations. The model predictions have exhibited good agreements with the experimental results and also with the other theoretical predictions
文摘In this work,the influence of heat treatment on Polyamide-1010 structure of aggregation state was studied by using WAXD and SAXS techniques.The results showed that the best crystallinity was obtained nearby T=175℃ for Polyamide-1010 samples with various annealing treatment.Through extrapolating method,the Tg obtained was approximately 58℃.Based on the one-dimensional electron density correlation function of partially crystalline polymers,some structural parameters of Polyamide-1010 were determined by SAXS.