The influence of head-neck and implant position on the range of motion after total hip arthroplasty

To study the influence of head-neck ratio and implant position on the range of motion (ROM) after total hip arthroplasty (THA).Methods In this study the author established a three-dimensional computerized model of hip joint and tested the range of motion of three different head-neck ratio after total hip arthroplasty.Results Range of motion after total hip arthroplasty depended on design parameters such as head-neck ratio,but also on the implantation parameters such as the cup’s inclination and antevertion,the stem’s antevertion and their combination of each other.Optimal range of motion required compliant position of total hip components.The range of motion increased with the enlarging of head-hnck ratio.Conclusion Higher head-neck ratio leads to optimal range of motion and decreased the prevalence of prosthetic impingement within compliant,well-defined combination of cup’s inclination,cup’s antevertion and stem’s antevertion depending on the intended ROM.Domestic magnesium-silicon jade total hip prosthesis has too low head-neck ratio to result in enough range of motion that fulfilled daily living after total hip arthroplasty.14 refs,4 figs,3 tabs.

Analysis on Change Characteristics of Diurnal Temperature Range in Benxi County from 1958 to 2010

Based on annual mean maximum and minimum temperatures,diurnal temperature range,precipitation,sunshine,total cloud cover and water barometric pressure data in Benxi County from 1958 to 2010,using statistical analysis,the results show that the annual and seasonal diurnal temperature ranges present significant decreasing tendencies,and the reducing tendency is the most remarkable in winter. Autumn reducing tendency is stronger than that in spring,and it is the weakest in summer. Annual and seasonal average temperatures,average maximum and minimum temperatures all present the remarkable rising trends. Rising trend of the minimum temperature is more significant than that of the maximum temperature. The monthly mean diurnal temperature range also presents reducing tendency,and the most reducing scope appear in January and February. Annual and season diurnal temperature range changes are related to sunshine,mean minimum temperature,mean maximum temperature,precipitation,total cloud cover and water barometric pressure,but various essential factors are different in each season. Annual mean temperature,annual mean minimum temperature,annual mean maximum temperature and annual diurnal temperature range all have sudden changes,but the age is inconsistent.

Prediction Model of Abutment Pressure Affected by Far-Field Hard Stratum Based on Elastic Foundation Theory

In view of the three-dimensional dynamic abutment pressure,the influence of the far-field hard stratum(FHS)in deep,thick coal seams is indeterminant.Based on elastic foundation theory,a three-dimensional dynamic prediction model of the abutment pressure was established.Using this model,the dynamic change in the coal seam abutment pressure caused by the movement of the FHS was studied,and a method for determining the dynamic change range of the abutment pressure was developed.The results of the new prediction model of the abutment pressure are slightly higher than the measured values,with an error of 0.51%,which avoids the shortcomings of the results because the Winkler foundation model results are lower than the measured values and have an error of 9.98%.As time progresses,the abutment pressure and its distribution range are affected by the FHS movement,which has the characteristics of gradually increasing dynamic change until the FHS fractures.The peak value of the abutment pressure increases linearly with time,and the influence range increases with time following a power function with an exponent of less than 1.The influence range of the FHS movement on the abutment pressure ahead of the working face,behind the working face,and along the working face is 10 times,25 times,and 17 times the mining thickness,respectively.According to the actual geological parameters,the dynamic change range of the coal seam abutment pressure was determined by drawing an additional stress curve and by determining the threshold value.These research results are of great significance to the partition optimization of the roadway support design of deep,thick coal seams.

Comparison Between Computer Simulation of Transport and Diffusion of Cloud Seeding Material Within Stratiform Cloud and the NOAA-14 Satellite Cloud Track

A precipitation enhancement operation using an aircraft was conducted from 1415 to 1549 LST 14 March 2000 in Shaanxi Province. The NOAA-14 satellite data received at 1535 LST soon after the cloud seeding shows that a vivid cloud track appears on the satellite image. The length, average width and maximum width of the cloud track are 301 km, 8.3 and 11 km, respectively. Using a three-dimensional numerical model of transport and diffusion of seeding material within stratiform clouds, the spatial concentration distribution characteristics of seeding material at different times, especially at the satellite receiving time, are simulated. The model results at the satellite receiving time are compared with the features of the cloud track. The transported position of the cloud seeding material coincides with the position of the track. The width, shape and extent of diffusion of the cloud seeding material are similar to that of the cloud track. The spatial variation of width is consistent with that of the track. The simulated length of each segment of the seeding line accords with the length of every segment of the track. Each segment of the cloud track corresponds to the transport and diffusion of each segment of the seeding line. These results suggest that the cloud track is the direct physical reflection of cloud seeding at the cloud top. The comparison demonstrates that the numerical model of transport and diffusion can simulate the main characteristics of transport and diffusion of seeding material, and the simulated results are sound and trustworthy. The area, volume, vidth, depth, and lateral diffusive rate corresponding to concentrations 1, 4, and 10 L-1are simulated in order to understand the variations of influencing range.

THE PROTOTYPE OBSERVATION OF JET-FLOW ATOMIZATION

The paper introduces the significance of prototype observations of jet-flow atomization and the survey of Xiangkeyian hydropower station.After presenting briefly the processes forming jet-flow atomization and the main factors affecting on it,the paper puts emphases on analysing and studying the influence ranges of various jet-flow atomization regions. It is just imperative to forecast these today in hydraulic and electric projects.