Performance evaluations on inner vs. outer decomposition first parallel join algorithms for two nested loop joins

Two popular traditional join algorithms and their parallel versions are introduced. When designing join algorithms in serial computing environment, decomposing inner relation is considered as the right direction to save disk I/Os. However, two different decomposition algorithms are compared, such as inner vs. outer decomposition first algorithms for tuple-based and block-based nested loop joins, showing that the proposed approach is 20% better than general approach. Also lemmas are proved, when we have to use the outer decomposition first parallel join algorithms.

DS-CDMA system outer loop power control and improvement for multi-service

When a new user accesses the CDMA system, the load will change drastically, and therefore, the advanced outer loop power control （OLPC） technology has to be adopted to enrich the target signal interference ratio （Silt） and improve the system performance. The existing problems about DS-CDMA outer loop power control for multi-service are introduced and the power control theoretical model is analyzed. System simulation is adopted on how to obtain the theoretical performance and parameter optimization of the power control algorithm. The OLPC algorithm is improved and the performance comparisons between the old algorithm and the improved algorithm are given. The results show good performance of the improved OLPC algorithm and prove the validity of the improved method for multi-service.

Transformations of phosphatidylinositol phosphates in the outer and inner nuclear membrane are linked to synthesis and restitution of cellular membranes

The ultimate goal in phosphoinositides cellular metabolism is to decipher their global functional organization and coordination of the com- partmentalized signaling processes. In this report we present evidence linking nuclear phos- phoinositides cycle with endoplasmic reticulum synthesis and function. The rapid transformation of [3H]inositol-labeled phosphoinositides in the intact nuclei (IN) was captured in chase studies for 0-5 min, followed by examination of phosphatidylinositides in the inner nuclear me- mbrane (INM), the outer nuclear membrane (ONM) and endoplasmic reticulum (ER). We revealed that synthesis of phosphatidylinositol phosphates (PIPs) occurs in ONM and the de- phosphorylation takes place in the INM. The rapid transformation of the radiolabeled PIPs in ONM reverberated in their appearance and successive transformation in INM, and in the 5min chased nuclei was tracked to ONM as the re- emerging radiolabeled phosphatidylinositol (PI). These chase-uncovered changes in ONM and INM PIPs profiles allow us to conclude that the observed conversions in the nuclear membrane continuum are induced by the lateral movement of the membrane and its transit from the cytosolic to nuclear and back to cytosolic environment. The suggested membrane synthesisinduced movement provides the means to transport the membrane- and the membrane lipid ligand-associated cytosolic proteins to the intranuclear spaces and renewal of INM. Export of the nuclear components interacting with the modified INM, by exiting from nuclear to cytosolic site, endows ER with a steady influx of the membrane that is conditioned to generate vesicles according to the nucleus delivered templates.

Lipophilic extractives of the inner and outer barks from six different Pinus species grown in Indonesia

The chemical compositions of the dichloromethane extracts of inner and outer barks from six Pinus species（P.elliotii,P.oocarpa,P.caribeae,P.merkusii,P.montezumae,and P.insularis） grown in Indonesia were investigated by GC and GC–MS.Generally,the amounts of extractive contents were higher in the inner bark than in the outer bark except for P.merksuii.Fatty acids,monoterpenes,sesquiterpenes,resin acids,triterpenoids,and steroids were detected and quantified.Inner and outer barks differed not only in content of these compounds but also in their composition.Fatty acids and alcohols were the major classes of lipophilic compounds in the outer bark of P.caribeae, P.insularis,and P.montezumae.Steroids and triterpenoids were the dominant compounds identified in the inner bark of P.elliotii,P.insularis,and P.merkusii.Resin acids were the most abundant group in the inner bark of P.oocarpa whereas monoterpenes and sesquiterpenes were recorded in minor quantities in both bark layers of all species.

Viscous Inner and Outer Pressure Forming Method of Thin-walled Tube and Its Application

Aiming at overcoming the difficulties in integral forming of thin-walled tubes with complex shapes, a novel forming method by inner and outer pressure through viscous was proposed. In this method, by dividing large deformation of the part into inner and outer pressure forming deformations, the limit deformation of tube part can be increased by several times. Meanwhile, the principle of viscous inner and outer pressure forming was provided, and key problems during the forming process such as reduction of the wall-thickness and instability wrinkling were analyzed. Thereby, the complex curved surface super-alloy GH3044 thin-walled tube with varying diameter ratio of 1.35（the ratio between the maximum and minimum diameters of the part） can be integrally formed by this method. The experimental surface of the formed part is superior in quality and the wall-thickness distribution is uniform. The results show that the viscous inner and outer pressure forming can provide a new approach for integral forming of thin-walled tubes with complex shapes.

Influence of Inner/Outer Stator Pole Ratio and Relative Position on Electromagnetic Performance of Partitioned Stator Switched Flux Permanent Magnet Machines

Based on the 6-pole outer stator(armature winding-stator),the influence of inner(permanent magnet-stator)/outer stator pole ratio n(n=NIS/NOS),stator relative positions and rotor pole number combinations on electromagnetic performance of partitioned stator switched flux permanent magnet(PM)machines(PS-SFPMMs)is investigated in this paper.Since the armature windings and PMs are located in two separated stators and PMs are stationary,PS-SFPMMs have high fault tolerance capabilities.To maximize the torque performance,the PM of inner stator pole should be aligned with outer stator pole when n is odd while the iron rib of inner stator pole should be aligned with outer stator pole when n is even.No matter what n is selected,the rotor pole number NR can be any integers except the phase number and its multiples.The analysis results indicate that the optimal NR is closed to(NIS+NOS)/2 and it is odd when n is odd while it is even when n is even.Meanwhile,symmetrical phase back-EMF waveform will be obtained when the ratio of Min(NOS,NIS)to the greatest common divisor of Min(NOS,NIS)and NR is even.Based on the optimal rotor pole numbers for 6-pole outer stator with different n and corresponding optimal relative position together with same rated copper loss,the average torque is improved by 18.4%,25.1%and 25.7%respectively in PS-SFPMMs with n equal to 2,3 and 4 when compared with PS-SFPMM with n equal to 1.The analyses are validated by experiment results of the prototype machine.

Inner and outer pressure forming of nickel based super-alloy thin-walled part with variable diameter sections

A novel forming method of nickel based super-alloy thin-walled part with variable diameter sections was proposed by using inner and outer pressure with the visco-elasto-plastic pressure-carrying medium at room temperature,and the principle of the method was provided.Experiments and FE simulations were carried out to analyze the deformation characteristics for the part with larger variable diameter ratio(35%).The results show that visco-elasto-plastic pressure-carrying medium can meet the requirements of the room-temperature deformation condition for nickel based super-alloy sheet.The inner and outer pressure forming with the visco-elasto-plastic pressure-carrying medium can meet the requirements of dimensional accuracy for the thin-walled part with variable diameter sections.The thinning of wall-thickness is less than 4%.This method provides a new approach for near-net shape forming of nickel based super-alloy thin-walled parts with variable diameter sections.

Outer Loop Power Control Algorithm Based on T-norms Information Fusion Technology in TD-SCDMA

An outer loop power control algorithm based on triangle norm(t-norm) information fusion technology is proposed in this paper.According to the difference between block error rate and bit error rate with target values,the membership function calculation and level dividing of the two differences are dealt with.And then t-norm operator is used to fuse the two membership function values to determine the adjustment step-size.The algorithm can acquire the optimal adjustment step-size in the light of the channel status and avoid the overshoot phenomenon of the existing outer power control methods.As a result,the block error rate can converge to the target value quickly.Experiment results verify the excellent property of the algorithm.

Synchronization investigation of the network group constituted by the nearest neighbor networks under inner and outer synchronous couplings

A new synchronization technique of inner and outer couplings is proposed in this work to investigate the synchro- nization of network group. Some Haken-Lorenz lasers with chaos behaviors are taken as the nodes to construct a few nearest neighbor complex networks and those sub-networks are also connected to form a network group. The effective node controllers are designed based on Lyapunov function and the complete synchronization among the sub-networks is realized perfectly under inner and outer couplings. The work is of potential applications in the cooperation output of lasers and the communication network.

Forward masking in distinguishing inner and outer hair cell damage

Forward Masking Temporal audiotory resolution is the ability of the auditory system to resolve auditory signals in the time domain. Forward masking is a means of studying temporal resolution where one tone, the probe, is masked by a preceding tone, the masker. Forward masking is

Sanitary Sewage Treatment with Jet Inner-loop Bioreactor

A jet inner-loop bioreactor (JIBR) was used to treat synthetic sanitary sewage with low, medium and high COD load. The experimental results show that it could meet discharge standard at 20\|30 min of HRT (hydraulic retention time) for low COD concentration and 60\|120 min of HRT for medium and high COD concentration. The maximal COD volume loading and COD sludge loading of 27 kg\5m -3 \5d -1 and 5 kg/d per kg MLSS were acheived respectively, that were 10\|20 times higher than those of traditional wastewater treatment processes. The BOD 5 removal efficiency was more than 90% and NH + 4 —N more than 85%. The study on the activity showed that the oxygen consumption rate of the activated sludge in the JIBR was 39.13 mg\5L -1 \5h -1 , which was 1.7 times higher than that of the SBR(Sequencing Batch Reactor) and the dominant bacteria in jet inner\|loop bioreactor was Pseudomonas species.

内圣外王的期盼:中国古代君德论及其特征

中国古代君德论起源于殷周,发展于两汉,兴盛于唐,繁荣于两宋,变革于明末清初,一脉相承而内容不断丰富。君德的内容包含了君主的德性、器识、才智、能力等诸多因素,主要体现在君主个人修养以及施政过程中如何处理君臣关系、君民关系等方面。完善君德的方式主要有经筵讲读、皇储教育、家训教化、大臣谏诤、史书褒贬。古代君德论特征鲜明,君主地位的尊崇、历史的教训与现实的需要是君德论的起点,儒家“修齐治平”“内圣外王”理论是君德论的思想基础,读经观史,以经为则、以史为鉴是完善君德的重要手段,“致君尧舜”是君德修养的重点。古人已经形成了一套围绕君主而展开的关于君德修养的理论体系。同时也要看到,古人讨论君德,既存在“师道”与“君道”之间无法调和的矛盾,也没有进行制度层面的反思,反映的只是一种泛道德化的政治伦理观。

基于奇异摄动分解的带机械臂旋翼无人机飞行稳定性研究

为了降低无人机和机械臂之间的耦合作用,提高带臂四旋翼无人机飞行过程中的稳定性,首先建立系统动力学模型,然后根据实际情况,对模型进行简化。在此基础上进行内、外环分解,外环为四旋翼位置控制和机械臂角度控制,内环为四旋翼俯仰角控制。对于外环的动力学模型,根据速度变化特点,利用奇异摄动理论对外环变量,即四旋翼线速度和机械臂角速度,进行快、慢变子系统分解,再次降低了系统间的耦合性。对于分解后的快、慢变子系统,设计非奇异终端滑模控制并引入干扰观测器,以期提高带臂四旋翼无人机飞行过程中的稳定性。最后,仿真验证了所设计算法的优越性。

我国聚变堆氚增殖循环技术最新研究进展与展望

氚增殖循环(也称外循环)是实现聚变堆氚燃料自持的关键。氚增殖循环由增殖剂产氚、提氚、氢同位素分离、氚分析检测等多个单元组成,各单元之间相互关联,缺一不可。依托国家重点研发计划“CFETR增殖包层氚提取与测量工程技术”项目,近期在多个氚增殖技术研究中取得了新进展。主要包括:在中国绵阳堆上在线演示了增殖包层百居里级在线产氚与提氚;开展了1∶1规模的增殖包层氚提取与氢同位素分离氢氘模拟实验,动态提取效率达99.1%,停堆提取效率达99.95%,氢同位素分离浓缩倍数达104倍,回收效率达99.26%;开展了基于水精馏的含氚水处理中试试验,贫化大于2 000倍,浓缩大于20倍。基于此,对未来聚变堆的氚工厂设计和建设进行了展望。

圆柱滚子轴承滚子对数修形优化研究

为了提高轴承的疲劳寿命,采用Romax Designer工程分析软件,在充分考虑径向游隙和内外圈相对倾斜量(影响轴承寿命的主要因素)对修形效果影响的基础上,对某大兆瓦风电机组齿轮箱输出轴轴承进行了对数修形优化分析。首先,对国际标准ISO/TS 16281寿命计算方法进行了简要分析;然后,对不同径向游隙情况下对数修形的效果进行了分析;最后,对不同内外圈相对倾斜量情况下对数修形的效果进行了分析。研究结果表明:以轴承最大接触应力最小为优化目标和以国际标准ISO/TS 16281寿命最长为优化目标的轴承对数修形,其最佳修形量不同,相应的ISO/TS 16281寿命有很大不同;在该轴承的具体条件下,以ISO/TS 16281寿命最长为优化目标的最佳修形凸度量对应的ISO/TS 16281寿命比以最大接触应力最小为优化目标的最佳修形凸度量对应的ISO/TS 16281寿命长2.39%~10.63%;以ISO/TS 16281寿命最长为优化目标的最佳修形凸度量对应的ISO/TS 16281寿命比未修形的ISO/TS 16281寿命长111.47%~1054.88%,建议以ISO/TS 16281寿命最长为优化目标对轴承进行修形优化设计。该研究结果可为滚子类轴承的优化设计提供参考。

应用于储能系统的CLLLC谐振变换器控制策略研究

动态性能和运行效率是CLLLC谐振变换器的重要性能指标。针对传统电压闭环控制加入电流驱动同步整流后系统动态性能进一步变差的问题,提出一种谐振电流内环的电压电流双闭环变频控制策略,并给出双环控制和同步整流的综合控制方法。首先根据变换器的增益特性,分析电感比和品质因数对增益曲线和效率的影响,并据此进行谐振参数设计;其次根据不同谐振状态下的谐振电流特性实现同步整流;最后引入谐振电流内环控制,实现双环控制和同步整流的综合控制。仿真结果表明,所提综合控制策略能够产生精确的同步整流驱动信号,相比于传统电压闭环控制,能够显著改善变换器对负载扰动和电压扰动的动态性能。

抑制采样白噪声干扰的PWM整流器无差拍控制

无差拍控制(DBC)是一种应用于整流器电流内环的预测控制,但该算法对系统参数敏感,当采样受到持续噪声干扰时波形畸变严重。为此,此处提出了一种基于DBC的白噪声抑制算法,实验结果表明,该算法在较大电感参数偏差下能保持稳定,在白噪声干扰下能够显著降低电流畸变率。

概率区间值犹豫模糊集多属性群决策模型及其应用

目的:研究概率区间值犹豫模糊集及应用。方法:将概率区间值犹豫模糊数,用区间值隶属度的中位数、区间值隶属度的清晰度以及概率构成的三维点坐标进行刻画,在此基础上提出了概率区间值犹豫模糊元的相关运算。根据概率区间值犹豫模糊元的相关运算采用熵值法计算属性权重。最后基于TOPSIS思想给出了一个新的贴近度公式,并利用新的贴近度公式对方案排序。结果:建立的概率区间值犹豫模糊集多属性群决策模型可以有效排序方案。结论:将概率区间值犹豫模糊集采用区间值隶属度的中位数、区间值隶属度的清晰度以及概率来表示不仅可行,而且可以用来解决多属性群决策问题。

经世的庄子与庄子的经世——论钟泰对庄子内圣外王之道的开显

历代解庄、注庄者在诠释庄子思想时,多将庄子视为岩穴之士,而忽略了其思想中所具有的经世之志与治理主张。钟泰则通过对《庄子》文本的分析,在梳理庄子形象变迁的基础上,指出了庄子思想中所具有的忧患意识与现实关照。他认为《庄子》内七篇完整地阐发了庄子本人的内圣外王之道:《逍遥游》阐明了内圣外王之道的价值指向,《齐物论》为内圣外王之道奠定了认识论基础,《养生主》指出了内圣外王之道的修养工夫,《人间世》则阐发了内圣外王之道的实践智慧,《德充符》则诠释了内圣外王之道的内在关联,《大宗师》与《应帝王》则论述了内圣外王之道的实施路径。以此内七篇为基础,钟泰分别细致剖析了庄子内圣之学与外王之道的具体含义,彰显了庄子经世思想的内在逻辑,为理解庄子治道思想开显了政治哲学视域下的诠释路径。