Advancements and Challenges in Organic–Inorganic Composite Solid Electrolytes for All‑Solid‑State Lithium Batteries

To address the limitations of contemporary lithium-ion batteries,particularly their low energy density and safety concerns,all-solid-state lithium batteries equipped with solid-state electrolytes have been identified as an up-and-coming alternative.Among the various SEs,organic–inorganic composite solid electrolytes(OICSEs)that combine the advantages of both polymer and inorganic materials demonstrate promising potential for large-scale applications.However,OICSEs still face many challenges in practical applications,such as low ionic conductivity and poor interfacial stability,which severely limit their applications.This review provides a comprehensive overview of recent research advancements in OICSEs.Specifically,the influence of inorganic fillers on the main functional parameters of OICSEs,including ionic conductivity,Li+transfer number,mechanical strength,electrochemical stability,electronic conductivity,and thermal stability are systematically discussed.The lithium-ion conduction mechanism of OICSE is thoroughly analyzed and concluded from the microscopic perspective.Besides,the classic inorganic filler types,including both inert and active fillers,are categorized with special emphasis on the relationship between inorganic filler structure design and the electrochemical performance of OICSEs.Finally,the advanced characterization techniques relevant to OICSEs are summarized,and the challenges and perspectives on the future development of OICSEs are also highlighted for constructing superior ASSLBs.

Heat transfer enhanced inorganic phase change material compositing carbon nanotubes for battery thermal management and thermal runaway propagation mitigation

Developing technologies that can be applied simultaneously in battery thermal management(BTM)and thermal runaway(TR)mitigation is significant to improving the safety of lithium-ion battery systems.Inorganic phase change material(PCM)with nonflammability has the potential to achieve this dual function.This study proposed an encapsulated inorganic phase change material(EPCM)with a heat transfer enhancement for battery systems,where Na_(2)HPO_(4)·12H_(2)O was used as the core PCM encapsulated by silica and the additive of carbon nanotube(CNT)was applied to enhance the thermal conductivity.The microstructure and thermal properties of the EPCM/CNT were analyzed by a series of characterization tests.Two different incorporating methods of CNT were compared and the proper CNT adding amount was also studied.After preparation,the battery thermal management performance and TR propagation mitigation effects of EPCM/CNT were further investigated on the battery modules.The experimental results of thermal management tests showed that EPCM/CNT not only slowed down the temperature rising of the module but also improved the temperature uniformity during normal operation.The peak battery temperature decreased from 76℃to 61.2℃at 2 C discharge rate and the temperature difference was controlled below 3℃.Moreover,the results of TR propagation tests demonstrated that nonflammable EPCM/CNT with good heat absorption could work as a TR barrier,which exhibited effective mitigation on TR and TR propagation.The trigger time of three cells was successfully delayed by 129,474 and 551 s,respectively and the propagation intervals were greatly extended as well.

Pervaporation performance and characterization of hydrophilic ZSM-5 zeolite membranes for high inorganic acid and inorganic salts

The hydrophilic ZSM-5 zeolite membranes are applied to separate the inorganic acid solutions and inorganic acid/inorganic salt mixtures by pervaporation,and the membrane presents good stability,dehydration,and desalination performance.Influences of inorganic acid type(H_(2)SO_(4),H_(3)PO_(4),HNO_(3),and HCl),H_(2)SO_(4)concentration(1-6 mol·L^(-1)),test temperature(60-90℃)and inorganic acid/inorganic salt type(2 mol·L^(-1)H_(2)SO_(4)and sulfate,2 mol·L^(-1)H3PO4 and phosphate)on the pervaporation performance are investigated in this work.Either for concentrating 3%(mass)H_(2)SO_(4)solution or consecutive dehydrating 20%(mass)H_(2)SO_(4)solution,the hydrophilic ZSM-5 zeolite membrane has a good dehydration performance and stability.Even though the H_(2)SO_(4)concentration and test temperature are increased to 6 M and 90℃,only H_(2)O molecules could pass through the membrane and pH value of the permeation is kept neutral.Besides,the membrane has good dehydration and desalination performance for H_(2)SO_(4)/sulfates and H_(3)PO_(4)/phosphate mixtures,and the rejection of natrium salt,molysite,and magnesium is almost 100%.

Effects of inorganic nutrients and environmental factors on the removal of n-propylbenzene and isopropylbenzene in seawater by cryptophytes Rhinomonas reticulata S6A

To effectively remove n-propylbenzene(n-PBZ)and isopropylbenzene(i-PBZ)leaked into seawater using Rhinomonas reticulata S6A(a newly isolated marine microalga),the effects of three inorganic nutrients and four environmental factors on their degradation were determined after 7 d of inoculation.Results show that NaNO_(3) at 300 mg/L caused a higher removal efficiency of both n-PBZ and i-PBZ(44.79%and 39.26%),while for NaH_(2) PO_(4)·H_(2) O,greater removal rates of two PBZs(47.30%and 42.23%)were achieved at 30 and 20 mg/L,respectively.NaHCO_(3) supplementation(500-750 mg/L)resulted in a large reduction(43.67%-45.04%)in i-PBZ concentration.The change in seawater pH(from 6 to 9)did not affect the elimination of n-PBZ and i-PBZ.The most suitable salinity and temperature were 30 and 25-30℃,respectively,leading to the PBZs removal of~40%.Light intensity exhibited significant influence on elimination of PBZs,and the maximum removal efficiencies of 56.07%(n-PBZ)and 55.00%(i-PBZ)were recorded under 200 and 600μmol/(m^(2)·s),respectively.In addition,the microalga could still remove PBZs when it failed to grow well due to darkness,strong light,low temperature,or low salinity,which might mean that good growth of alga is not always a necessary condition for PBZs removal.Therefore,attention should be paid to the suitability of nutrient levels and environmental conditions(excluding pH)in seawater when using microalgae for bioremediating PBZs-contaminated seawater.

Semitransparent organic photovoltaics enabled by transparent p-type inorganic semiconductor and near-infrared acceptor

Semitransparent organic photovoltaics(STOPVs)have gained wide attention owing to their promising applications in building-integrated photovoltaics,agrivoltaics,and floating photovoltaics.Organic semiconductors with high charge carrier mobility usually have planar and conjugated structures,thereby showing strong absorption in visible region.In this work,a new concept of incorporating transparent inorganic semiconductors is proposed for high-performance STOPVs.Copper(I)thiocyanate(CuSCN)is a visible-transparent inorganic semiconductor with an ionization potential of 5.45 eV and high hole mobility.The transparency of CuSCN benefits high average visible transmittance(AVT)of STOPVs.The energy levels of CuSCN as donor match those of near-infrared small molecule acceptor BTP-eC9,and the formed heterojunction exhibits an ability of exciton dissociation.High mobility of CuSCN contributes to a more favorable charge transport channel and suppresses charge recombination.The control STOPVs based on PM6/BTP-eC9 exhibit an AVT of 19.0%with a power conversion efficiency(PCE)of 12.7%.Partial replacement of PM6 with CuSCN leads to a 63%increase in transmittance,resulting in a higher AVT of 30.9%and a comparable PCE of 10.8%.

Reinforced SnO_(2) tensile-strength and“buffer-spring”interfaces for efficient inorganic perovskite solar cells

Suppressing nonradiative recombination and releasing residual strain areprerequisites to improving the efficiency and stability of perovskite solar cells(PSCs).Here,long-chain polyacrylic acid(PAA)is used to reinforce SnO_(2)film and passivate SnO_(2)defects,forming a structure similar to“reinforcedconcrete”with high tensile strength and fewer microcracks.Simultaneously,PAA is also introduced to the SnO_(2)/perovskite interface as a“buffer spring”torelease residual strain,which also acts as a“dual-side passivation interlayer”to passivate the oxygen vacancies of SnO_(2)and Pb dangling bonds in halideperovskites.As a result,the best inorganic CsPbBr_(3)PSC achieves a championpower conversion efficiency of 10.83%with an ultrahigh open-circuit voltageof 1.674 V.The unencapsulated PSC shows excellent stability under 80%relative humidity and 80℃over 120 days.

Research,application and development of inorganic binder for casting process

Inorganic binder used in casting process has the advantages of low odor,labor-friendly conditions,and relatively low cost,which is one of the main development directions for casting molding materials in the future.However,compared to organic binders(such as resin binders),inorganic binders exhibit lower bonding strength and are more sensitive to environmental humidity.This sensitivity poses challenges,particularly in the reclamation of used sand,thus limiting their broader application.In this paper,the research and application status of inorganic binders(mainly silicate inorganic binders)and their curing methods are summarized.In addition,the research and application of phosphate inorganic binders and 3D printing inorganic binders that are being developed are introduced.Meanwhile,a detailed comparative analysis is conducted on the challenging issue of“reclamation for used sand”in the application of inorganic binders.Finally,the development direction of inorganic binders is clarified.

Exploration of Ideological and Political Materials for the Course of Inorganic and Analytical Chemistry for Environmental and Ecological Engineering Major

Integrating ideological and political theories teaching into the whole process of classroom teaching construction is a new requirement for implementing the fundamental task of cultivating people by virtue and playing the role of collaborative education.In order to realize the seamless integration of inorganic and analytical chemistry courses and ideological and political education,this paper summarizes the current situation of ideological and political research on inorganic and analytical chemistry courses in three major databases in China(VIP,CNKI and Wanfang),and sorts out the knowledge points,ideological and political elements and educational goals according to the content of the course chapters,to provide a basic guarantee for the ideological and political education construction of the course.

Research Progress in Mechanochemistry of Inorganic Materials

With the progress of science and technology,China has gradually attached importance to research and exploration in chemistry,and the achievements in exploring mechanochemistry are also quite significant.Therefore,it is necessary to study and explore mechanochemistry.This article mainly discusses the application of mechanochemistry in powder and some silicate materials,as well as in special ceramics,and provides a brief introduction to provide reference for relevant researchers.

A Novel Approach to Synthesizing Porous ZnO Films: Inorganic Chelating Sol-Gel Method

Porous ZnO films are synthesized by inorganic chelating sol-gel method,which is a novel sol-gel technique using zinc nitrate as starting materials and citric acid as the chelating reagent.The crystal structure,surface morphology,porous and optical properties of the deposited films are investigated.X-ray diffraction pattern analysis shows that crystal structure of the ZnO films is hexagonal wurtzite.Scanning electron microscopy (SEM) shows that the ZnO film is porous.The curve of pore size distribution has two peak values at about 2.02nm and 4.97nm and BET surface area of the ZnO film is 27.57m2/g.In addition,the transmittance spectrum gives a high transmittance of 85% in the visible region and optical bandgap of the ZnO film (fired at 500℃) is 3.25eV.

Inorganic Elements in Kernel of Amygdalus communis L. Measured Using ICP-OES Method

[Objective] The aim was to study on distribution of inorganic elements in kernel of Amygdalus communis L., providing reference for quality evaluation of A. communis L. species. [Method] Totally 26 species of inorganic elements in kernel, including Al, B, Be, Ca, Co, Cu, Fe, Mg, Mn, Mo, Na, Ni, P, Pb, Si, Sn, Sr, Ti, Zn, Cd, As, Se, V, Hg, Cr and K were measured with inductively coupled plasma emission spectrum （ICP-OES） and principal components analysis （PCA）. [Result] A. communis L. of different species and in different factories showed a similar curve in content of inorganic elements; absolute contents of the elements differed significantly. In addition, the accumulated variance contribution of five principle factors achieved as high as 84.371% and the variance contribution made by the first three factors accounted for 67.546%, proving that Fe, Ti, Pb, Na, Se, Cu, Mo, K, Zn, Ni, Ca and Sr were characteristic elements. [Conclusion] The method, which is brief, rapid and accurate, can be used for determination of inorganic elements in kernel of A. communis L., providing theoretical references for further development and utilization of A. communis L.

Inorganic Carbon Utilization in Some Marine Phytoplankton Species

In order to learn the ways and possible utilization mechanisms of dissolved inorganic carbon (DIC) in marine phytoplankton species under carbon-replete or -limited conditions, the activity of extracellular carbonic anhydrase (CA) was assayed in different pH, CO 2 and DIC concentrations. Extracellular CA in Amphidinium carterae and Prorocentrum minimum was detected under carbon-replete conditions, while in Melosira sp., Phaeodactylum tricornutum, Skeletonema costatum, Thalassiosira rotula, Emiliania huxleyi and Pleurochrysis carterae, CA activity was assayed under conditions of carbon limitation. No CA activity was found even under carbon-limited conditions in Chaetoceros compressus, Glenodinium foliaceum, Coccolithus pelagicus, Gephrocapsa oceanica and Heterosigma akashiwo. In species without extracellular CA activity, the direct HCO - 3 uptake was investigated using a pH drift technique and the anion exchange inhibitor 4′4′-diisothiocyanatostilbene-2,2-disulfonic acid (DIDS) in a closed system. The result showed that direct HCO - 3 transport might occur by an anion exchange mechanism in species Coc. pelagicus and G. oceanica. Of the 13 species investigated, only H. akashiwo did not have the potential for direct uptake or extracellular CA-catalyzed HCO - 3 utilization.

国外无机化学教材的研究——以Housecroft&Sharpe的Inorganic Chemistry(5th edition)为例

Catherine Housecroft和Alan G.Sharpe合著的Inorganic Chemistry是一本经历了时间检验的经典教材,其内容涵盖了无机化学的基础原理、元素化学、生物无机化学以及这些知识在催化、工业生产和材料等领域的应用。本文希望通过对该教材的介绍及其与国内教材的编写内容和排版等的对照分析,为国内无机化学的教材编写提供一些有价值的参考,同时为从事无机化学教学的教师提供一个选择参考教材的选项。

Inorganic Elements in Tuber of Chinese Herbal Medicine Radix Pseudostellariae from Guizhou Province

By analyzing the contents of inorganic elements in Radix Pseudostellariae from Guizhou Province, the aim was to assess the present quality of Radix Pseu- dostellariae, set limited standards of heavy metals, establish element fingerprints, and find out the characteristic elements. ICP-MS was used to measure the content of inorganic elements and map the element fingerprints. Additionally, WM/T2-2004 was applied to evaluate the quality of heavy metal elements, and the characteristic elements were determined by principal component analysis. The results showed that the contents of inorganic elements in Radix Pseudostellariae were between 0.057 and 959 mg/kg with the coefficients of variation ranging from 0.134 to 1.478, and the contents of Cd, As, Pb, and Hg were below the Standard of WM/T2-2004 in 90% of Radix Pseudostellariae. The standard limits of heavy metals in Radix Pseu- dostellariae were Cr≤6.5 mg/kg, Cu≤10 mg/kg, As≤2.0 mg /kg, Cd≤0.3 mg/kg, Hg≤0.15 mg/kg, and Pb≤4.0 mg/kg. The features of the inorganic eJements finger- prints could provide theoretical basis of identifying the quality of Radix Pseudostel- lariae and distinguishing Radix Pseudostellariae from other Chinese herbal medicines. The characteristic inorganic elements of Radix Pseudostellariae were found to be Cd, Cu, Co, Zn, Fe, Ca, Mg, and AI. Radix Pseudostellariae from Guizhou Province contained abundant inorganic elements, and the contents of heavy metals were below the evaluation criterion. The study provided a reference for the future development of the limiting values of heaw metals in Radix Pseudostellariae.

Photosynthetic Responses to Inorganic Carbon in Ulva lactuca Under Aquatic and Aerial States

Intertidal macroalgae experience continual alternation of photosynthesis between aquatic state at high tide and aerial state at low tide. The comparative photosynthetic responses to inorganic carbon were investigated in the common intertidal macroalga Ulva lactuca L. along the coast of Shantou between aquatic and aerial state. The inorganic carbon dissolved in seawater at present could fully (at 10 ℃ or 20 ℃) or nearly (at 30 ℃) saturate the aquatic photosynthesis of U. lactuca . However, the aerial photosynthesis was limited by current ambient atmospheric CO 2 level, and such a limitation was more severe at higher temperature (20-30 ℃) than at lower temperature (10 ℃). The carbon_saturated maximal photosynthesis of U. lactuca under aerial state was much greater than that under aquatic state at 10 ℃ and 20 ℃, while the maximal photosynthesis under both states was similar at 30 ℃. The aerial values of K m (CO 2) for photosynthesis were higher than the aquatic values. On the contrary, the values of apparent photosynthetic CO 2 conductance under aerial state were considerably lower than that under aquatic state. It was concluded that the increase of atmospheric CO 2 would enhance the primary productivity of U. lactuca through stimulating the photosynthesis under aerial state during low tide.

Dynamics of soil inorganic nitrogen and their responses to nitrogen additions in three subtropical forests, south China

Three forests with different historical land-use, forest age, and species assemblages in subtropical China were selected to evaluate current soil N status and investigate the responses of soil inorganic N dynamics to monthly ammonium nitrate additions. Results showed that the mature monsoon evergreen broadleaved forest that has been protected for more than 400 years exhibited an advanced soil N status than the pine （Pinus massoniana） and pine-broadleaf mixed forests, both originated from the 1930＇s clear-cut and pine plantation. Mature forests had greater extractable inorganic N pool, lower N retention capacity, higher inorganic N leaching, and higher soil C/N ratios. Mineral soil extractable NH4^＋-N and NO3-N concentrations were significantly increased by experimental N additions on several sampling dates, but repeated ANOVA showed that the effect was not significant over the whole year except NH4^＋-N in the mature forest. In contrast, inorganic N （both NH4^＋-N and NO3^--N） in soil 20-cm below the surface was significantly elevated by the N additions. From 42% to 74% of N added was retained by the upper 20 cm soils in the pine and mixed forests, while 0%-70% was retained in the mature forest. Our results suggest that land-use history, forest age and species composition were likely to be some of the important factors that determine differing forest N retention responses to elevated N deposition in the study region.

Study on Graphene Oxide Modified Inorganic Phase Change Materials and Their Packaging Behavior

We prepared the nano-inorganic phase-change ＂alloy＂ materials through the modification of Na2SO4·10H2O using Na2HPO4·12H2O and GO nano-nucleating agent, and further investigated their thermophysical properties such as melting/solidification temperatures and enthalpies via differential scanning calorimetry. When the weight ratio of Na2SO4·10H2O and Na2HPO4·12H2O was 8：2 and the weight ratio of graphene oxide was 0.5% of phase change material, the phase change ＂alloy＂ material showed excellent performances, specifically, the melting temperature and latent heat were found to be 22 ℃ and 190 J/g with a degree of subcooling decreased from 8.6℃ to 2.1℃. In order to extend the application of the phase change ＂alloy＂ material to building energy saving field, it was adsorbed on expanded glass beads under vacuum and further covered with diatomite. When the adsorption rate of EGB（volume） and PCAM（weight） was 2.5：1, the particle size of diatomaceous earth was found to be 3.6μm, while the best packaging result was obtained with the melting temperature and latent heat being 21℃ and 135 J/g, and no leakage was observed.

Using Hourly Measurements to Explore the Role of Secondary Inorganic Aerosol in PM_(2.5)during Haze and Fog in Hangzhou, China

This paper explores the role of the secondary inorganic aerosol （SIA） species ammonium,NH4＋,nitrate,NO3-,and sulfate,SO24-,during haze and fog events using hourly mass concentrations of PM2.5 measured at a suburban site in Hangzhou,China.A total of 546 samples were collected between 1 April and 8 May 2012.The samples were analyzed and classified as clear,haze or fog depending on visibility and relative humidity （RH）.The contribution of SIA species to PM2.5 mass increased to ～50％ during haze and fog.The mass contribution of nitrate to PM2.5 increased from 11％ during clear to 20％ during haze episodes.Nitrate mass exceeded sulfate mass during haze,while near equal concentrations were observed during fog episodes.The role of RH on the correlation between concentrations of SIA and visibility was examined,with optimal correlation at 60％-70％ RH.The total acidity during clear,haze and fog periods was 42.38,48.38 and 45.51 nmol m-3,respectively,indicating that sulfate,nitrate and chloride were not neutralized by ammonium during any period.The nitrate to sulfate molar ratio,as a function of the ammonium to sulfate molar ratio,indicated that nitrate formation during fog started at a higher ammonium to sulfate molar ratio compared to clear and haze periods.During haze and fog,the nitrate oxidation ratio increased by a factor of 1.6-1.7,while the sulfur oxidation ratio increased by a factor of 1.2-1.5,indicating that both gaseous NO2 and SO2 were involved in the reduced visibility.

Effects of Integrated Organic and Inorganic Fertilizers on Yield and Growth Parameters of Rice Varieties

We investigated the effects of integrated organic and inorganic fertilizers on the growth and yield of indica rice variety Manawthukha and japonica rice variety Genkitsukushi.In a split-plot design,the two rice varieties were assigned as main plot factors,and the integrated treatments were the subplot factors,including no-N fertilizer(N0),50%chemical fertilizer(CF)(CF50),100%CF(CF100),50%CF+50%poultry manure(PM)(CF50PM50),50%CF+50%cow manure(CM)(CF50CM50),and 50%CF+50%compost(CP)(CF50CP50).CF100 was equivalent to N at 85 kg/hm2.Manure was applied based on the estimated mineralizable nitrogen(EMN)level,which is dependent on total N(%)of each manure type.Manawthukha rice plants were taller with higher tiller number and dry matter content.However,higher soil-plant analysis development(SPAD)values were measured in Genkitsukushi throughout the crop growth period,resulting in higher seed-setting rate(%)and greater yield.At the same N level,CF50PM50 application in both rice varieties resulted in higher SPAD values,plant height and tiller number than CF100.CF50PM50 containing total N more than 4%supplied synchronized N for the demands of the rice plants,resulting in maximum dry matter,yield and yield components.CF50CM50 and CF50CP50 treatments containing total N less than 4%resulted in lower yields which were similar to CF100.These results indicated that integrating organic and inorganic fertilizers enhanced growth parameters and yields of Manawthukha and Genkitsukushi,while reducing the dose of chemical fertilizer.