A new method of the design and machining the casting moulds of helical intake ports of diesel engines is presented based on CAD / CAM technique. The problems about the smooth continuity between patches, the cutter int...A new method of the design and machining the casting moulds of helical intake ports of diesel engines is presented based on CAD / CAM technique. The problems about the smooth continuity between patches, the cutter interference and the determination of the mould split curve are discussed in details.The CAGD system of the intake port has been developed. and the casting mould is machined sucessfully on NC machine.展开更多
The aim of this experimental study is to investigate the effects of hydraulic parameters on the formation of air-entraining vortices at horizontal intake structures without approach flow induced circulation. Six intak...The aim of this experimental study is to investigate the effects of hydraulic parameters on the formation of air-entraining vortices at horizontal intake structures without approach flow induced circulation. Six intake pipes of different diameters were tested in the study. The intake pipe to be tested was horizontally mounted to the front side of a large reservoir and then for a wide range of discharges experiments were conducted and critical submergences were detected with adjustable approach channel sidewalls. Empirical equations were derived for the dimensionless critical submergence as a function of the relevant dimensionless parameters. Available data is also checked for the possible scale effect. Then, these obtained equations were compared with the similar ones in the literature which showed a quite good agreement.展开更多
文摘A new method of the design and machining the casting moulds of helical intake ports of diesel engines is presented based on CAD / CAM technique. The problems about the smooth continuity between patches, the cutter interference and the determination of the mould split curve are discussed in details.The CAGD system of the intake port has been developed. and the casting mould is machined sucessfully on NC machine.
基金supported by the TUBITAK (The Scientific and Technological Research Council of Turkey) (Grant No. 110M676)
文摘The aim of this experimental study is to investigate the effects of hydraulic parameters on the formation of air-entraining vortices at horizontal intake structures without approach flow induced circulation. Six intake pipes of different diameters were tested in the study. The intake pipe to be tested was horizontally mounted to the front side of a large reservoir and then for a wide range of discharges experiments were conducted and critical submergences were detected with adjustable approach channel sidewalls. Empirical equations were derived for the dimensionless critical submergence as a function of the relevant dimensionless parameters. Available data is also checked for the possible scale effect. Then, these obtained equations were compared with the similar ones in the literature which showed a quite good agreement.
