Coupled interactive effects of ammonia and hydrogen additions on ethylene diffusion flames: A detailed kinetic study

In order to create effective combustion technologies and fuels with low or no carbon emissions,the research was conducted to assess the coupled interactive effects of NH_(3) and H_(2) additions on ethylene counterflow diffusion flames from a kinetic perspective.The effects of the NH_(3)/H_(2) combination on flame temperatures,major species,key radicals,important intermediate species,representative oxygenated species and NO_xwere examined.The results of the study utilizing fictitious inert NH_(3) and/or H_(2) revealed the chemical effects of the two components.It was found that the NH_(3)/H_(2) coupled effects had a more effective inhibitory effect on soot precursors than the effects of corresponding sum of single NH_(3) or H_(2) addition.The production of soot precursors was promoted by the coupled chemical effects of NH_(3) and H_(2),but the coupled dilution and thermal effects were observed to have a greater impact,resulting in a decrease of the mole fractions of soot precursors.As for the interaction of NH_(3) and H_(2) effects,the presence of H_(2) decreased the chemical effects of NH_(3) on the augmentation of C_(2)H_(2),A1,A2,and CH_(3)CHO mole fractions.The NH_(3) addition alleviated the H_(2) chemical effects on increasing C_(2)H_(2),C_(3)H_(3),A1 and A2 concentrations.Conversely,the NH_(3)chemical effects on C_(3)H_(3),OH and CH_(3)CHO were enhanced when H_(2) was added.The presence of NH_(3) augmented the chemical effects of H_(2) on the growth of OH mole fraction.Moreover,the H_(2) chemical effects hindered the production of NO and NO_(2) in the presence of NH_(3).

Combined and interactive effects of interference fit and preloads on composite joints

The combined and interactive effects of the bolt-hole fit conditions and the preloads of the fasteners on the load carrying capacity of single-lap composite-to-titanium bolted joints have been investigated both experimentally and numerically. Quasi-static tests of the hybrid joints with different fit conditions are implemented, and a three dimensional finite element progressive failure analysis model is proposed to predict the influences of the bolt-hole fit conditions and fastener＇s pre- loads on the mechanical behaviors of the joints. Based on the experimental validated simulation method, a multi-factor, mixed levels orthogonal design table and the analysis of variance method are used to arrange the simulation conditions and to further study the interactive effects of preloads and fit conditions. Through the analysis of the results, for the researched double bolt, single-lap composite-titanium joints, it is found that： the effects of both the interference fit and the preloads change from positive into negative mode with the increase of the interference fit values or preload values; appropriate bolt-hole fit conditions and preloads can improve the bolt-hole contact conditions of the loaded joints, and then retard the fiber failures around the fastener holes, and increase the load carrying capacity of the joints eventually; the interactive effect of the bolt-hole interference fit conditions and preloads cannot be ignored and the parameters need to be considered together and synthetically as the joints are being optimized.

Interactive effects of understory removal and fertilization on soil respiration in subtropical Eucalyptus plantations

Aims It has been well recognized that understory vegetation plays an important role in driving forest ecosystem processes and functioning.In subtropical plantation forests,understory removal and fertiliza-tion have been widely applied;however,our understanding on how understory removal affects soil respiration and how the process is regulated by fertilization is limited.Here,we conducted an under-story removal experiment combined with fertilization to evaluate the effects of the two forest management practices and their inter-actions on soil respiration in subtropical forest in southern China.Methods The study was conducted in a split-plot design with fertilization as the whole-plot factor,understory removal as the subplot factor and block as the random factor in subtropical Eucalyptus plantations.In total,there were four treatments:control with unfertilized and intact understory(CK),understory removal but without fertilization(UR),with fertilization but without understory removal(FT)and with fertilization+understory removal(FT+UR).Eucalyptus above-and belowground biomass increment,fine root biomass,soil tempera-ture,soil moisture and soil respiration were measured in the present study.understory respiration(Ru)was quantified in different ways:Ru=RCK−Ru or Ru=RFT−R(FT+u);fertilization increased soil respiration(RFI)was also quantified in different ways:RFI=RFT−RCK or RFI=R(FT+u)−Ru.Important Findingsover a 2-year experiment,our data indicate that understory removal significantly decreased soil respiration,while fertilization increased soil respiration.understory removal decreased soil respiration by 28.8%under fertilization,but only 15.2%without fertilization.Fertilization significantly increased soil respiration by 23.6%with the presence of understory vegetation,and only increased by 3.7%when understory was removed,indicating that fertilization increased soil respiration mainly by increasing the contribution of the understory.our study advances our understanding of the interactive effects of understory management and fertilization on soil respiration in subtropical plantations.

Natural and Socioeconomic Factors and Their Interactive Effects on House Collapse Caused by Typhoon Mangkhut

Typhoons are an environmental threat that mainly affects coastal regions worldwide.The interactive effects of natural and socioeconomic factors on the losses caused by typhoon disasters need further examination.In this study,GeoDetector was used to quantify the determinant powers of natural and socioeconomic factors and their interactive effects on the rate of house collapse in Guangdong and Guangxi Provinces of southeast China caused by Typhoon Mangkhut in 2018.We further identify the dominant factors that influenced the disaster losses.The local indicators of spatial association method was then introduced to explain the spatial heterogeneity of the disaster losses under the influence of the dominant factor.The results indicate that both natural and socioeconomic factors significantly affected the house collapse rate.The maximum precipitation was the dominant factor,with a q value of 0.21,followed by slope and elevation,with q values of 0.17 and 0.13,respectively.Population density and per capita gross domestic product had q values of 0.15 and0.13,respectively.Among all of the interactive effects of the influencing factors,the interactive effect of elevation and the ratio of brick-wood houses had the greatest influence(q=0.63)on the house collapse rate.These results can contribute to the formulation of more specific safety and property protection policies.

Effects of water and nitrogen addition on vegetation carbon pools in a semi-arid temperate steppe

Global change will lead to increases in regional precipitation and nitrogen（N） deposition in the semi-arid grasslands of northern China. We investigated the responses of vegetation carbon（C） pools to simulated precipitation and N deposition increases through field experiments in a typical steppe in Inner Mongolia. The treatments included NH4NO3 addition at concentrations of 0（CK）, 5（LN, low nitrogen）, 10（middle nitrogen, MN）, and 20（HN,high nitrogen）（g m^（-2）a^（-1）） with and without water. After three consecutive years of treatment, from 2010 to 2012,water addition did not significantly change the size of the total vegetation C pools, but it significantly decreased the ratio of root：shoot（R：S）（P = 0.05） relative to controls. By contrast, N addition significantly increased the total vegetation C pools. The C pools in the LN, MN and HN treatments increased by 22, 39 and 44 %, respectively. MN produced the largest effect among the N concentrations,although differences between N-added treatments were not significant（P ？ 0.05）. N addition significantly reduced the ratio of root：shoot（R：S）（P = 0.03）. However, there were no significant interactive effects of water and N addition on the vegetation C pools.

Effects of the Dicranopteris linearis root system and initial moisture content on the soil disintegration characteristics of gully erosion

Benggang erosion is caused by a special type of gully erosion in southern China that seriously endangers the local ecology and environment.In this study,typical Benggang collapsing-wall soils were used as the study area to investigate the effects of different initial moisture contents and dicranopteris linearis root weight densities,as well as their interactions on disintegration in orthogonal test method.The results showed that the rate of soil disintegration decreased as a linear function of the initial moisture content.The soil disintegration rate tended to rise and then fall as the root weight density increased,reflecting an optimum root weight density of 0.75-1.00 g/100 cm3.The incorporation of dicranopteris linearis roots was most effective for soil consolidation in the shallow layers of soil.In addition,the disintegration rate of the collapsing-wall soils increases as the soil layer deepened.The dicranopteris linearis root system and initial moisture content had an interactive effect that was more pronounced in deeper soils.However,the combined effect of these processes was always dominated by the initial moisture content.Moderate initial soil moisture content(0.20-0.24 g/g)and the addition of a high root density in dicranopteris linearis(0.75-1.00 g/100 cm3)were the optimal combinations that reduced the disintegration rate.In conclusion,maintaining a suitable natural moisture content in collapsing-wall soils and taking measures that use plants to consolidate soil can effectively prevent and control the occurrence of Benggang erosion.The results of this study provided further insight into the factors that influence soil disintegration and offered a scientific basis for soil erosion management in the southern China.

Analysis of Genetic Effects of Nuclear-Cytoplasmic Interaction on Quantitative Traits:Genetic Model for Diploid Plants

A genetic model was proposed for simultaneously analyzing genetic effects of nuclear, cytoplasm, and nuclear-cytoplasmic interaction （NCI） as well as their genotype by environment （GE） interaction for quantitative traits of diploid plants. In the model, the NCI effects were further partitioned into additive and dominance nuclear-cytoplasmic interaction components. Mixed linear model approaches were used for statistical analysis. On the basis of diallel cross designs, Monte Carlo simulations showed that the genetic model was robust for estimating variance components under several situations without specific effects. Random genetic effects were predicted by an adjusted unbiased prediction （AUP） method. Data on four quantitative traits （boll number, lint percentage, fiber length, and micronaire） in Upland cotton （Gossypium hirsutum L.） were analyzed as a worked example to show the effectiveness of the model.

Interaction effects of flotation reagents for SAG mill reject of copper sulphide ore using response surface methodology

Flotation reagents have a complex behaviour in the beneficiation of base minerals in clayey ores.Interaction effects of reagents on the efficiency of copper flotation for a highly clayey low-grade sulphide ore were investigated using a central composite design.Preliminary results showed that sodium-isopropyl-xanthate(SIPX)and O-isopropyl-N-ethyl-thionocarbamate(IPETC)were found to be the most efficient collectors in the presence of lime as the pH regulator.The effects of dosage of collectors(SIPX and IPETC)and the dosage of methyl-isobutyl-carbonyl(MIBC)as frother on the separation efficiency were evaluated at different pH levels.Based on the analysis of variance(ANOVA),the interaction effects of the collector−pH and collector−frother were significant for the separation efficiency.At the low level of collector dosage,increasing pH from 9 to 11 enhanced copper separation efficiency from 81%to 86%for IPETC and from 77%to 86%for SIPX.Results of ANOVA showed that the maximum copper separation efficiency(88.7%)was obtained at the dosages of 8.6 g/t SIPX,7 g/t IPETC and 20 g/t MIBC at pH 11.Finally,it was concluded that a mixture of SIPX and IPETC collectors was more suitable to treat highly clayey sulphide ores.

Effects of salinity, light and temperature on growth rates of two species of Gracilaria (Rhodophyta)

Effects of temperature, salinity and light intensity on growth rates of Gracilaria lichenoides and G. tenuistipitata var. liui Zhang et Xia were tested. Eight to ten levels of each factor were first tested separately. The best growth rate was obtained under the conditions of 32℃, 30 and 240 μmol/（m^2·s） for G. lichenoides, and 24℃, 20 and 200 μmol/（m^2·s） for G. tenuistipitata, respectively. Then a uniform design was used to evaluate the optimal combinations of the three factors. The best conditions for the highest daily specific growth rates （% increase in wet weight） are determined to be 31.30℃, 32.10, and 287.23 lamol/（m^2·s） for G. lichenoides （16.26%/d）, and 25.38℃, 21.10, and 229.07 lamol/（m^2·s） for G tenuistipitata （14.83%/d）, respectively.

INTERACTION MODELS FOR EFFECTIVE THERMAL AND ELECTRIC CONDUCTIVITIES OF CARBON NANOTUBE COMPOSITES

The present article provides supplementary information of previous works of analytic models for predicting conductivity enhancements of carbon nanotube composites. The models, though fairly simple, are able to take account of the effects of conductivity anisotropy, nonstraightness, and aspect ratio of the CNT additives on the conductivity enhancement of the composite and to give predictions agreeing well with existing experimental data. The omitted detailed derivation of this model is demonstrated in the present article with a more systematical analysis, which may help with further development in this direction. Furthermore, the effects of various orientation distributions of CNTs are reported here for the first time. The information may be useful in design or fabrication technology of CNT composites for better or specified conductivities.

A Hydrodynamic Model for Dimpled Mechanical Gas Seal Considering Interaction Effect

The mechanical gas seal of aero engine has to face the problems of high wear rate and short lifetime.Surface texture has shown beneficial effects over the tribological characteristics.Here,a hydrodynamic model for dimpled annular area of mechanical gas seal considering the″interaction effect″between adjacent dimples is developed based on the Reynolds equation.Different multi-row columns are chosen and the dimensionless pressure in radial and circumferential directions is calculated.The results indicate that the″interaction effect″is more obvious in the circumferential direction than in the radial direction,even when the area and depth of the dimples are same.Moreover,for the 5×5column,the dimensionless average pressure considering the″interaction effect″increases by45.41% compared with the 1×5column.Further analysis demonstrates that the model with the 5×5column can be more reasonable with the consideration of reducing the calculation error caused by boundary conditions to investigate the hydrodynamic effect for dimpled mechanical gas seal.

Effects of the Interaction between Hydroxyapatite Nanoparticles and Hepatoma Cells

To gain a better understanding of the anticancer effects of hydroxyapatite （HAP） nanoparticles in vivo and in vitro, the effects of the interaction of HAP nanoparticles with hepatoma cells were explored. HAP nanoparticles were prepared by homogeneous precipitation and characterized by laser particle analysis and transmission electron microscopy （TEM）. HAP nanoparticles were observed to be uniformly distributed, with rod-like shapes and diameters in the range of 42.1-87.1 nm. Overnight attached, suspended, and proliferating Bel-7402 cells were incubated with HAP nanoparticles. Inverted microscopy observation revealed that HAP nanoparticles with a cell membrane showed good adsorption. TEM demonstrated that HAP nanoparticles were present on the surface of cells, continuously taken up by cells through endocytosis, and transported in vesicles close to the nucleus. Fluorescence microscopy showed that the concentrations of intracellular Ca2＋ labeled with Fluo-3 calcium fluorescent probe were significantly enhanced. In addition, inverted microscopy observation revealed that suspended cells treated with HAP nanoparticles did not adhere to the culture bottle, resulting in cell death. After the overnight attached cells were treated with HAP nanoparticles for 96 h with increasing doses of HAP nanoparticles, inverted microscopy observation revealed that cell proliferation was slowed and ceU-ceU adhesion was weakened. Feulgen staining and image analysis indicated that the nuclear DNA content of the cells was markedly reduced, and argyrophilic nucleolar organizer region （AgNOR） staining and image analysis indicated that the number of AgNORs was significantly decreased. Therefore, hepatoma cells brought about the adsorption, uptake, transport and degradation of HAP nanoparticles. In addition, HAP nanoparticles affected hepatoma cells with regard to cell-cell adhesion, cell and extracellular matrix adhesion, and DNA and protein synthesis; thus inhibiting cell proliferation. This understanding of the effects of interaction between HAP nanoparticles and hepatoma cells is useful for further study of the anticancer mechanisms of HAP nanoparticles.

Analysis on Interaction Effects Between Variety and Site of Silage Maize Regional Test in Guizhou Province

Taking the yield in the second group of Guizhou silage maize regional test in 2019 as data information, 8 experimental sites and 12 silage maize varieties as experimental objects, the interaction effect between gene and environment was analyzed by using AMMI model. The results showed that the average fresh weight yield of each variety was 3 199.5~3 976.6 kg/667m^(2), among them, 5 varieties had an increase in the yield. Variety variation accounted for 10.51% of the total variation;experimental site variation accounted for 63.22% of the total variation;interaction effect variation between gene and environment accounted for 26.28% of the total variation;IPCA1 and IPCA2 variation accounted for 50.7% and 31.2% of the interaction variation, respectively;IPCA3 variation accounted for 7.25% of the interaction variation. g_4, g_8, g_9, g_10, g_11 and g_12 had better adaptability to e_1, e_2, e_6 and e_7;while g_1, g_2, g_3, g_5, g_6 and g_7 had better adaptability to e_3, e_4, e_5 and e_8. In consideration of yield, g_1(Huinongqing 2) and g_9(Xinyu 666) were silage maize varieties with high and stable yield;g_3(Hemuyu 905), g_8(Wuhuayu 3) and g_11(Liangdu 191) had general stability, and their yield was higher than that of the control;g_12(Jinduyu 999) had the worst stability and low yield.

The Weather Temperature and Air Pollution Interaction and Its Effect on Hospital Admissions due to Respiratory System Diseases in Western China

Air pollution has ever become a global major public health problem.Previous studies showed that air pollution is associated with excessive mortality and morbidity of respiratory disease[1-2].The extreme weather temperature can impact human health and the thermal stresses can lead not only to direct deaths and illnesses,but also to aggravation of respiratory disease[3-4].Though the independent

Effects of a liquid lithium curtain as the first wall in a fusion reactor plasma

This paper explores the effect of a liquid lithium curtain on fusion reactor plasma, such curtain is utilized as the first wall for the engineering outline design of the Fusion Experimental Breeder （FEB-E）. The relationships between the surface temperature of a liquid lithium curtain and the effective plasma charge, fuel dilution and fusion power production have been derived. Results indicate that under normal operation, the evaporation of liquid lithium does not seriously affect the effective plasma charge, but effects on fuel dilution and fusion power are more sensitive. As an example, it has investigated the relationships between the liquid lithium curtain flow velocity and the rise of surface temperature based on operation scenario II of the FEB-E design with reversed shear configuration and high power density. Results show that even if the liquid lithium curtain flow velocity is as low as 0.5 m/s, the effects of evaporation from the liquid lithium curtain on plasma are negligible. In the present design, the sputtering of liquid lithium curtain and the particle removal effects of the divertor are not yet considered in detail. Further studies are in progress, and in this work implication of lithium erosion and divertor physics on fusion reactor operation are discussed.

Preliminary results of the spilling effects on the oscillation of a pipe with compressible fluid inside

It is known to all, the spilling of pipeline may cause serious problems, especially when the pipe conveying petroleum, natural gas or other toxic substance. There are countless accidents during past century. Once the spilling occurs, the vibration of the pipe would aggravate spill situation and even result in crack of the pipe. The consequence will be more severe when the fluid inside is compressible. To prevent the detriment of the spilling model is developed by assuming the leakages as orifices or nozzles and a 2-D vertical simply supported pipe is selected to analyze the phenomena of the oscillation. Combining these two models, the oscillation model for the pipe with leakage is set up and the spilling effect is analyzed by numerical method. The amplitude of the pipe oscillation and the normal stress enlarge as the internal velocity increased, while the shear stress changes very little.

Interaction effects on heat conduction and thermal stress in an infinite elastic plane with two circular holes

Numerous researches have focused on the physical behavior of an elastic material in the vicinity of a single hole under the assumption that the interaction effects arising from the introduction of multiple holes remain negligible if the holes are placed sufficiently far from each other.In an effort to understand hole interaction effects on heat conduction and thermal stress,we consider the case when two circular holes are embedded in an infinite elastic material and use complex variable methods together with numerical analysis to obtain solutions describing temperature and elastic fields in the vicinity of the two circular holes.The results indicate that the interaction effects on temperature distribution and stress strongly depend on the relative size of the two holes and the distance placed between them but not on the actual size of the holes.

The Effect of Magnetic Field on Resistivity of Hg_(0.89)Mn_(0.11)Te in Different Temperature Range

The resistivity of Hg0.89Mn0.11Te has been measured by the superconducting quantum interference device magnetometer in the temperature range from 5 to 200 K under the applied magnetic field of 1, 2, 4 and 6.5 Tesla, respectively, compared with that of no-magnetic field. The results show that the resistivity increases with increase applied magnetic field at higher temperature from 80 to 200 K, but decreases at lower temperature from 5 to 25 K. There exists a transitive range from 25 to 80 K, where the variation of the resistivity shows different tendencies depending on the strength of magnetic field. Maximum difference of resistivity under 6.5 Tesla from that without magnetic field in the temperature range from 30 to 200 K is only about 5 Ω·cm, but it increases up to 3 orders of magnitude at 5 K. The analysis shows that the variation of resistivity of Hg0.89Mn0.11Te under the magnetic field is the algebraic sum of the transverse direction magnetoresistance effect and the sp-d exchange interaction effect. TDRME plays major role in the high temperature range. However, with the decrease of temperature, the effect of sp-d EI on the resistivity gradually exceeds that of the transverse direction magnetoresistance effect through the transitive range, and becomes the dominant effect in the temperature range from 5 to 25 K, which leads to the dramatic decrease of resistivity.

Interaction between cracks and effect of microcrack zone on main crack tip

Mechanism interaction between cracks with different orientation angles is analyzed based on the principle of superposition and a flattening method. It is found that the maximum interaction effect does not occur when the microcrack is along the direction parallel or perpendicular to the principal tensile stress, which is different from the conclusion drawn by Ortiz （1987）. The mechanism of microcrack generation and the effect of the microcrack zone on the main crack tip are studied. It is concluded that the microcrack zone has effect on the main crack tip, which increases with the increase of microcrack density and length.

Particles inside electrolytes with ion-specific interactions, their effective charge distributions, and effective interactions

In this work, we explore the statistical physics of colloidal particles that interact with electrolytes via ion-specific interactions. Firstly we study particles interacting weakly with electrolyte using linear response theory. We find that the mean potential around a particle is linearly determined by the effective charge distribution of the particle, which depends both on the bare charge distribution and on ion-specific interactions. We also discuss the effective interaction between two such particles and show that, in the far field regime, it is bilinear in the effective charge distributions of two particles. We subsequently generalize the above results to the more complicated case where particles interact strongly with the electrolyte.Our results indicate that in order to understand the statistical physics of non-dilute electrolytes, both ion-specific interactions and ionic correlations have to be addressed in a single unified and consistent framework.