Superposition of dual electric fields in covalent organic frameworks for efficient photocatalytic hydrogen evolution

Covalent organic frameworks(COFs)are promising materials for converting solar energy into green hydrogen.However,limited charge separation and transport in COFs impede their application in the photocatalytic hydrogen evolution reaction(HER).In this study,the intrinsically tunable internal bond electric field(IBEF)at the imine bonds of COFs was manipulated to cooperate with the internal molecular electric field(IMEF)induced by the donor-acceptor(D-A)structure for an efficient HER.The aligned orientation of IBEF and IMEF resulted in a remarkable H_(2) evolution rate of 57.3 mmol·g^(-1)·h^(-1)on TNCA,which was approximately 520 times higher than that of TCNA(0.11 mmol·g^(-1)·h^(-1))with the opposing electric field orientation.The superposition of the dual electric fields enables the IBEF to function as an accelerating field for electron transfer,kinetically facilitat-ing the migration of photogenerated electrons from D to A.Furthermore,theoretical calculations indicate that the inhomogeneous charge distribution at the C and N atoms in TNCA not only pro-vides a strong driving force for carrier transfer but also effectively hinders the return of free elec-trons to the valence band,improving the utilization of photoelectrons.This strategy of fabricating dual electric fields in COFs offers a novel approach to designing photocatalysts for clean energy synthesis.

Internal Polarization Field Induced Hydroxyl Spillover Effect for Industrial Water Splitting Electrolyzers

The formation of multiple oxygen intermediates supporting efficient oxygen evolution reaction(OER)are affinitive with hydroxyl adsorption.However,ability of the catalyst to capture hydroxyl and maintain the continuous supply at active sits remains a tremendous challenge.Herein,an affordable Ni2P/FeP2 heterostructure is presented to form the internal polarization field(IPF),arising hydroxyl spillover(HOSo)during OER.Facilitated by IPF,the oriented HOSo from FeP2 to Ni2P can activate the Ni site with a new hydroxyl transmission channel and build the optimized reaction path of oxygen intermediates for lower adsorption energy,boosting the OER activity(242 mV vs.RHE at 100 mA cm-2)for least 100 h.More interestingly,for the anion exchange membrane water electrolyzer(AEMWE)with low concentration electrolyte,the advantage of HOSo effect is significantly amplified,delivering 1 A cm^(-2)at a low cell voltage of 1.88 V with excellent stability for over 50 h.

Internal electric field modulation by copper vacancy concentration of cuprous sulfide nanosheets for enhanced selective CO_(2) photoreduction

Although the internal electric field(IEF)of photocatalysts is acknowledged as a potent driving force for photocharge separation,modulating the IEF intensity to achieve enhanced photocatalytic performances remains a challenge.Herein,cuprous sulfide nanosheets with different Cu vacancy concentration were employed to study IEF modulation and corresponding direct charge transfer.Among the samples,Cu_(1.8)S nanosheets possessed intensified IEF intensity compared with those of Cu_(2)S and Cu_(1.95)S nanosheets,suggesting that an enhanced IEF intensity could be achieved by introducing more Cu vacancies.This intensified IEF of Cu_(1.8)S nanosheets induced numerous photogenerated electrons to migrate to its surface,and the dissociative electrons were then captured by Cu vacancies,resulting in efficient charge separation spatially.In addition,the Cu vacancies on Cu_(1.8)S nanosheets accumulated electrons as active sites to lower the energy barrier of rate-determining step of CO_(2)photoreduction,leading to the selective conversion of CO_(2)to CO.Herein,the manipulation of IEF intensity through Cu vacancy concentration regulation of cuprous sulfide photocatalysts for efficient charge separation has been discussed,providing a scientific strategy to rationally improve photocata lytic performances for solar energy conversion.

Enhancing an internal electric field by a solid solution strategy for steering bulk-charge flow and boosting photocatalytic activity of Bi_(24)O_(31)Cl_(x)Br_(10-x)

Constructing bismuth oxyhalide solid solutions with a single homogeneous phase have intrigued the research community;however,a deeper understanding of the intrinsic origin for improved bulk-charge separation is still unclear.Herein,a series of Bi_(24)O_(31)Cl_(x)Br_(10-x) solid solutions with the same structural characteristics were synthesized by crystal structure regulation.Combining density functional theory calculation,Kelvin probe force microscopy,and zeta potential testing results,an enhanced internal electric field(IEF)intensity between[Bi_(24)O_(31)]and[X]layers was achieved by changing halogen types and ratios.This greatly facilitated bulk-charge separation and transfer efficiency,which is significant for the degradation of phenolic organic pollutants.Owing to the enhanced IEF intensity,the charge carrier density of Bi_(24)O_(31)Cl_(4)Br_(6) was 33.1 and 4.7 times stronger than that of Bi_(24)O_(31)Cl_(10) and Bi_(24)O_(31)Br_(10),respectively.Therefore,Bi24O31Cl4Br6 had an optimal photoactivity for the degradation of bisphenol A,which was 6.21 and 2.71 times higher than those of Bi_(24)O_(31)Cl_(10) and Bi_(24)O_(31)Br_(10),respectively.Thus,this study revealed the intrinsic mechanism of the solid solution strategy for photocatalytic performance enhancement with respect to an IEF.

Middle or low water pressure direct spiral double helix converging nozzle structure optimization and flow field analysis

In order to solve the problem of using new nozzle is proposed in fire rescue robot. middle or low water pressure to form fine water mist, a Existing water mist nozzles are basically used for high pressure and in large size, complex structure and poor low pressure atomization effect in comparison with requirement of snake-like fire rescue robots. On the basis of comprehensive typical spray noz- zles, a direct spiral double helix converging nozzle （DSDHCN） is proposed, which has the advanta- ges of small volume, light weight, simple structure, and convenient installation. To make the spray nozzle have good performance, and meet the requirements of more efficient fire extinguishing, a nu- merical study is carried out to analyze the internal and external full flow field of nozzle. A gas-liquid two-phase flow is applied to simulate the external full flow field of nozzle with VOF model in fluent software. The simulation results show the real situation of water flow out of the atomization nozzle and the water jet trajectory. Some simulations about middle or low water pressure direct spiral double he- lix converging optimized nozzle have been done in 30bar pressure. The simulation results show that the optimized nozzle structure not only makes the spray droplets have a good cone angle, but also have a sufficient axial velocity,which proves the structure rationality of the proposed optimized nozzle.

Geometrical shape of in-plane inclusion characterized by polynomial internal stress field under uniform eigenstrains

The internal stress field of an inhomogeneous or homogeneous inclusion in an infinite elastic plane under uniform stress-free eigenstrains is studied. The study is restricted to the inclusion shapes defined by the polynomial mapping functions mapping the exterior of the inclusion onto the exterior of a unit circle. The inclusion shapes, giving a polynomial internal stress field, are determined for three types of inclusions, i.e., an inhomogeneous inclusion with an elastic modulus different from the surrounding matrix, an inhomogeneous inclusion with the same shear modulus but a different Poisson＇s ratio from the surrounding matrix, and a homogeneous inclusion with the same elastic modulus as the surrounding matrix. Examples are presented, and several specific conclusions are achieved for the relation between the degree of the polynomial internal stress field and the degree of the mapping function defining the inclusion shape.

Magnetic Field Design by Using Image Effect from Iron Shield

Permanent magnet rings are presented, which exploit the image effect in the surrounding circular iron shields. The theory is given for a general permanent ring when the magnetization orientation at each coordinate angle ψ changes by =(n+1)ψ, where n is a positive or negative integer. For the uniformly magnetized case n=-1, the permanent ring produces no field in its bore, and the field is that of a dipole outside. When the ring is surrounded by a soft iron shield, its field becomes uniform in the bore, and zero outside the ring. The field can be varied continuously by moving the iron shield along the magnet axis. A small variable field device was constructed by using NdFeB permanent rings, which produced a field flux density of 0-0.5 T in the central region.

SPONTANEOUS POLARIZATION AND THE DISTRIBUTION OF INTERNAL STRESS AND ELECTRIC FIELDS AROUND A TRIPLE POINT

In this article, distributions of internal stress and internal electric fields around a triple point of ferroelectric polycrystals generated by the spontaneous deformation and spontaneous polarization were investigated. It was found that when all three grains consist of a single domain, the internal stresses and the internal electric fields do not vanish. Though it may be determined according to the principle of energy, the spontaneous configuration will not be unique without involving other conditions due to the symmetry of the crystal structure.

Experimental study on magnetic drug targeting in treating cholangiocarcinoma based on internal magnetic fields

Objective: To evaluate the effect of magnetic nanoparticle containing 5-fluorouracil (5-FU) targeting in treating chol- angiocarcinoma based on internal magnetic fields built inside the tumor. Methods: 32 nude mice of BABL/C bearing ectopic tumor were built by subcutaneouly injecting cholangiocarcinoma cell line QBC 939. Three weeks after tumor inoculation, the animal models were divided equally into four groups at random including: (a) group A, consisting of internal magnetic field built by magnetic biliary stent wires inserted into tumor tissue and receiving magnetic nanoparticles containing 5-FU administered via tail vein injection at 250 mg/kg for consecutive five days; (b) group B, receiving placebo (sodium chloride); (c) group C, receiving pure magnetic biliary stent wires without the applying of magnetic nanoparticles; (d) group D, consisting of external magnetic fields and the same treatment of magnetic nanoparticles containing 5-FU as group A. The tumor volumes were measured every 3 days, totally six times from treatment started. Tumor tissues were observed by transmission electron microscope when the nude mice were killed after the observation period. Results: The experimental group (group A) showed significantly therapeutic efficacy. Moreover, apoptosis of tumor cells could be easily detected in this group. Conclusion: Magnetic particles containing 5-FU combined with internal magnetic field can effectively treat cholangiocarcinoma, and its therapeutic efficacy is better than that of the traditional method based on external magnetic fields.

Energy Spectrum of Linear Internal Wave Field in the Vicinity of Continental Slope

The purpose of the research was to investigate two-dimensional modeling of efficiency of mixing, resulting from the reflection of a linear internal wave field (IWF) off a continental slope. Efficiency of deep ocean mixing was associated with the energy balance of the radiating IWF into an interior of the ocean in the vicinity of a sloping bottom topography. Since waves are generated not only at the fundamental frequency but also at all of its harmonics ωn = nω less than buoyancy frequency N and greater than Coriolis frequency f, our analysis includes, in general, an infinite number of discrete internal wave modes n satisfying the dispersion relationship for internal waves. However, since we are interested only in the radiating part of the field, the mode numbers are limited. Due to multiple singularities of order two caused by resonance in the vicinity of critical slope, the energy is visualized in Lδ -norm with δ > 2. Research results include the visualization of the effects of the continental slope and the Earth’s rotation on resulting energy in the vicinity of the slope.

Performance Prediction of an Optimized Centrifugal Pump with High Efficiency

The main structural parameters of the IR100-80-100A type chemical centrifugal pump have been optimized by means of an orthogonal test approach.The centrifugal pump has been modeled using the CFturbo software,and 16 sets of orthogonal-test schemes have been defined on the basis of 4 parameters,namely,the blade number,blade outlet angle,impeller outlet diameter,and impeller outlet width.Such analysis has been used to determine the influence of each index parameter on the pump working efficiency and identify a set of optimal combinations of such parameters.The internalflowfield in the centrifugal pump has been simulated by using the PumLinx software.These numerical results have shown that,compared with the prototype pump,the outlet pressure and shaft power of the optimized pump can be significantly reduced,and the pump working efficiency can be improved by 5.59%.In the present study,some arguments are also provided to demonstrate that,with respect to other optimization methods,the orthogonal test approach is more convenient,and requires less test times.

Revisiting N,S co-doped carbon materials with boosted electrochemical performance in sodium-ion capacitors:The manipulation of internal electric field

Heteroatom doping has emerged as a prevailing strategy to enhance the storage of sodium ions in carbon materials.However,the underlying mechanism governing the performance enhancement remains undisclosed.Herein,we fabricated N/S co-doped carbon beaded fibers(S-N-CBFs),which exhibited glorious rate performance and durableness in Na+storage,showcasing no obvious capacity decay even after 3500 cycles.Furthermore,when used as anodes in sodium-ion capacitors,the S-N-CBFs delivered exceptional results,boasting a high energy density of 225 Wh·kg^(-1),superior power output of 22500 W·kg^(-1),and outstanding cycling stability with a capacity attenuation of merely 0.014%per cycle after 4000 cycles at 2 A·g^(-1).Mechanistic investigations revealed that the incorporation of both pyridinic N and pyrrolic N into the carbon matrix of S-N-CBFs induced internal electric fields(IEFs),with the former IEF being stronger than the latter,in conjunction with the doped S atom.Density functional theory calculations further unveiled that the intensity of the IEF directly influenced the adsorption of Na+,thereby resulting in the exceptional performances of S-N-CBFs as sodium-ion storage materials.This work uncovers the pivotal role of IEF in regulating the electronic structure of carbon materials and enhancing their Na^(+)storage capabilities,providing valuable insights for the development of more advanced electrode materials.

Improvement of the Subcooling Problem of Sodium Acetate Trihydrate by a Combination of Stirring or Internal Electric Field and Nucleating Agent

Energy storage devices are the hub of a multi-energy complementary distributed energy system.Hydrated salts are the most suitable phase change material for energy storage devices,but subcooling is the main obstacle to their application.Nucleation requires a driving force so the use of nucleating agents alone does not reduce subcooling to a very low level.To address this issue,this paper first screened nucleating agents and then further reduced the subcooling of sodium acetate trihydrate in conjunction with stirring or direct current.The effects of rotor mass,rotational speed,direct current voltage,and electrode material on nucleation were analyzed.Finally,the stability of the composite phase change material in the presence of simultaneous stirring and energization was analyzed.The results showed that the addition of 1.5%in weight of disodium hydrogen phosphate dodecahydrate to sodium acetate trihydrate can reduce the subcooling to about 2.3℃.Continued addition of stirring or electricity can reduce the subcooling of sodium acetate trihydrate to within 0.5℃ or even eliminate it.The higher the momentum of the stirring,the better the improvement in subcooling,phase separation,and thermal conductivity.The higher the direct current voltage,the better the nucleation effect,but the electrode life will be lower.The silver electrode has the best nucleation effect.No new material was produced in the solution after 100 cycles in the presence of both stirring and direct current.The melting point of the phase change material was increased by 0.2℃ and the latent heat value decreased by 1.8%,still with good stability.The trace of deionized water should be added to the phase change material in subsequent studies to compensate for the consumption ofwaterby theanodicelution.

The first-principles study of ferroelectric behaviours of PbTiO3/SrTiO3 and BaTiOn/SrTiO3 superlattices

We have performed the first-principles calculation to investigate the origins of ferroelectricities and different po- larization behaviours of superlattices BaTiO3/SrTiO3 and PbTiO3/SrTiO3. The density of state （DOS） and electronic charge profiles show that there are strong hybridizations between atoms Ti and O and between atoms Pb and O which play very important roles in producing the ferroelectricities of superlattices BaTiO3/SrTiO3 and PbTiO3/SrTiO3. Ow- ing to the decline of internal electric field in SrTiO3 （ST） layer, the tetragonality and polarizations of superlattices decrease with increasing the fraction of SrTiO3 in the superlattices. We find that the polarization of PbTiO3/SrTiO3 is largerthan that of BaTiO3/SrTiO3 at the same ratio of components, because the polarization mismatch between PbTiO3 and SrTiO3 is larger than that between BaTiO3 and SrTiO3. The polarization and tetragonality are en- hanced with respect to those of bulk tetragonal BaTiO3 in the superlattices BaTiO3/SrTiO3, while the polarization and tetragonality are reduced with respect to those of bulk tetragonal PbTiO3 in superlattices PbTiO3/SrTiO3.

Significantly enhanced charge transfer efficiency and surface reaction on NiP_(2)/g-C_(3)N_(4) heterojunction for photocatalytic hydrogen evolution

In this work,a novel NiP_(2)/g-C_(3)N_(4)heterojunction via homogeneous precipitation method assisted by thermal phosphorization reaction was designed and constructed,and the optimized sample showed the excellent photocatalytic H_(2)evolution activity under visible-light irradiation,which was nearly 112 times higher than that of pristine g-C_(3)N_(4)sample.Experimental characterizations and DFT calculations demonstrated that the NiP_(2)nanoparticles covered on the g-C_(3)N_(4)surface can form a built-in electric field at the interface to accelerate the transfer of photoexcited electrons from g-C_(3)N_(4)to NiP_(2),crucial for hindering the recombination of electron-hole pairs.Moreover,the energy barrier of hydrogen evolution reaction can also vastly reduce when combined NiP_(2)and g-C_(3)N_(4)to construct NiP_(2)/g-C_(3)N_(4)heterojunction.This work represents a method through combing experimental and theoretical tools to thoroughly investigate the mechanism of photocatalytic process.

Geomagnetic Orbit Determination Using Fuzzy Regulating Unscented Kalman Filter

Geomagnetic orbit determination fits for nanosatellites which pursue low cost and high-density ratio,but one of its disadvantages is the poor position accuracy introduced by magnetic bias.Here,a new method,named the fuzzy regulating unscented Kalman filter(FRUKF),is proposed.The magnetic bias is regarded as a random walk model,and a fuzzy regulator is designed to estimate the magnetic bias more accurately.The input of the regulator is the derivative of magnetic bias estimated from unscented Kalman filter(UKF).According to the fuzzy rule,the process noise covariance is adaptively determined.The FRUKF is evaluated using the real-flight data of the SWARMA.The experimental results show that the root-mean-square(RMS)position error is 3.1 km and the convergence time is shorter than the traditional way.

Donor‐acceptor carbon nitride with electron‐withdrawing chlorine group to promote exciton dissociation

Carbon nitride(C_(3)N_(4))is promising for photocatalytic hydrogen production,but photogenerated electrons and holes in C_(3)N_(4)usually tend to exist as excitons due to intrinsic Coulomb interactions making its photocatalytic activity unsatisfactory.Herein,a well‐designed intramolecular C_(3)N_(4)‐based donor‐acceptor(D‐A)photocatalytic system was constructed to promote exciton dissociation.Due to its good chemical compatibility with melamine and appropriate sublimation property,2‐amino‐4,6‐dichloropyrimidine unit was chosen as the monomer to react with melamine to construct intramolecular D‐A system(CNCl_(x)).The hydrogen evolution rate of CNCl_(0.15)is 15.3 times higher than that of bulk C_(3)N_(4)under visible light irradiation,with apparent quantum efficiency of 13.6%at 420 nm.The enhanced activity is attributed to introduced electron‐withdrawing−Cl group as terminal group in the resulted CNCl_(x) samples,which can build internal electric field to promote the exciton dissociation into free electron and hole.In addition,lower work function value of CNCl_(x) samples indicates that internal electric field can help free electrons and holes transfer to the surface of CNCl_(x) samples for photocatalytic reaction.

INTERNAL FLOW IN CROSS-FLOW FAN FOR AIR CONDITIONER

A numerical analytic process is suggested combining direct boundary element methodwith discrete vortex method and internal flow in cross-flow fan calculated. The process considersnot only function of impeller, but also effect of volute casing. Internal flow field of cross-flow fan ispractically measured, and results compared with that from calculation. It shows that the process isexpected to be used in predicting performances of fluid machinery.

Regulating crystallinity in linear conjugated polymer to boost the internal electric field for remarkable visible-light-driven disinfection

Conjugated linear polymers are promising metal-free photocatalysts for visible-light-driven photocatalytic water disinfection,but it was still bottlenecked by the insufficient photogenerated charge separation and transport(CST)process.Herein,we obtained the highly crystalline imine-linked conjugated linear poly-mer(ODA-BPAH)with a greatly enhanced CST process.The highly crystalline ODA-BPAH exhibited excel-lent broad-spectrum water disinfection efficiency up to 99.99999%in 1 h,which is among the reported highest of state-of-the-art photocatalysts.The crystallinity of ODA-BPAH was regulated by simply turn-ing the solvent and the experiment results revealed that the ODA-BPAH with high crystallinity exhibited higher internal electric field strength and photocatalytic performance than that with low crystallinity,which indicates that higher crystallinity in linear conjugated polymers contributes to superior CST ef-ficiency as well as the generation of reactive oxygen species.This work highlights the impact of poly-mer crystallinity on the internal electric field and proves that linear poly-imine could be a new type of promising metal-free photocatalyst for water treatment.

Superstable potassium metal batteries with a controllable internal electric field

Stable potassium metal batteries(PMBs)are promising candidates for electrical energy storage due to their ability to reversibly store electrical energy at a low cost.However,dendritic growth and large volume changes hinder their practical application.Here,referring to the morphology and structure of a virus,a bionic virus-like-carbon microsphere(BVC)was designed as the anode host for a PMB.A BVC with a three-dimensional structure can not only control the electric field,which can suppress dendrite formation,but can also provide a larger space to accommodate the volume change during the cycle progress.The designed potassium(K)metal anode exhibits excellent cycle life and stability(during 1800 h of repeated plating/stripping of K at a current density of 0.1 mA cm−2,K-BVC can realize a very stable K metal anode with low voltage hysteresis).Stable cyclability and improved rate capability can be realized in a full cell using Prussian blue over 400 cycles.This research provides a new idea for the development of stable K metal anodes and may pave the way for the practical application of next-generation metal batteries.