Effects of spot size on the operation mode of Ga As photoconductive semiconductor switch employing extrinsic photoconductivity

To guide the illuminating design to improve the on-state performances of gallium arsenide(GaAs)photoconductive semiconductor switch(PCSS),the effect of spot size on the operation mode of GaAsPCSS based on a semi-insulating wafer with a thickness of 1 mm,triggered by a 1064-nm extrinsic laser beam with the rectangular spot,has been investigated experimentally.It is found that the variation of the spot size in length and width can act on the different parts of the output waveform integrating the characteristics of the linear and nonlinear modes,and then significantly boosts the PCSS toward different operation modes.On this basis,a two-channel model containing the active and passive parts is introduced to interpret the relevant influencing mechanisms.Results indicate that the increased spot length can peak the amplitude of static domains in the active part to enhance the development of the nonlinear switching,while the extended spot width can change the distribution of photogenerated carriers on both parts to facilitate the linear switching and weaken the nonlinear switching,which have been proved by comparing the domain evolutions under different spot sizes.

Experimental investigation of the polarityswitching process with different bipolar ionic liquid thruster operating frequencies

The bipolar ionic liquid thruster employs ionic liquid as a propellant to discharge positively and negatively charged high-energy particles under an alternating current(AC)power source,effectively suppressing electrochemical reaction and ensuring charge neutrality.Determining an optimal AC supply power source frequency is critical for sustained stable thruster operation.This study focuses on the emission characteristics of the ionic liquid thruster under varied AC conditions.The AC power supply was set within the frequency range of 0.5-64 Hz,with eight specific frequency conditions selected for experimentation.The experimental results indicate that the thruster operates steadily within a voltage range of±1470 to±1920 V,with corresponding positive polarity current ranging from 0.41 to 4.91μA and negative polarity current ranging from−0.49 to−4.10μA.During voltage polarity switching,an emission delay occurs,manifested as a prominent peak signal caused by circuit capacitance characteristics and a minor peak signal resulting from liquid droplets.Extended emission test was conducted at 16 Hz,demonstrating approximately 1 h and 50 min of consistent emission before intermittent discharge.These findings underscore the favorable impact of AC conditions within the 8-16 Hz range on the self-neutralization capability of the ionic liquid thruster.

Energy Storage Operation Modes in Typical Electricity Market and Their Implications for China

As the Chinese government proposes ambitious plans to promote low-carbon transition,energy storage will play a pivotal role in China’s future power system.However,due to the lack of a mature electricity market environment and corresponding mechanisms,current energy storage in China faces problems such as unclear operational models,insufficient cost recovery mechanisms,and a single investment entity,making it difficult to support the rapid development of the energy storage industry.In contrast,European and American countries have already embarked on certain practices in energy storage operation models.Through exploration of key issues such as investment entities,market participation forms,and cost recovery channels in both front and back markets,a wealth of mature experiences has been accumulated.Therefore,this paper first summarizes the existing practices of energy storage operation models in North America,Europe,and Australia’s electricity markets separately from front and back markets,finding that perfect market mechanisms and reasonable subsidy policies are among the main drivers for promoting the rapid development of energy storage markets.Subsequently,combined with the actual development of China’s electricity market,it explores three key issues affecting the construction of costsharing mechanisms for energy storage under market conditions:Market participation forms,investment and operation modes,and cost recovery mechanisms.Finally,in line with the development expectations of China’s future electricitymarket,suggestions are proposed fromfour aspects:Market environment construction,electricity price formation mechanism,cost sharing path,and policy subsidy mechanism,to promote the healthy and rapid development of China’s energy storage industry.

Exploration of Operation and Maintenance Management Mode and Innovation Mechanism of Pilot Base of Chemical Park

Based on the current situation of the operation and maintenance management of the pilot base in many chemical parks in China,this paper conducts an in-depth exploration of the operation and maintenance management and innovation mode of the pilot base from the aspects of the evaluation of the pilot project entering the park,safety and environmental protection supervision,pilot mode,and industrialization mode of the pilot test results,so as to provide solutions for accelerating the process and industrialization of the pilot project and realizing the innovation value of the pilot base.

Research on a Comprehensive Monitoring System for Tunnel Operation based on the Internet of Things and Artificial Intelligence Identification Technology

This article proposes a comprehensive monitoring system for tunnel operation to address the risks associated with tunnel operations.These risks include safety control risks,increased traffic flow,extreme weather events,and movement of tectonic plates.The proposed system is based on the Internet of Things and artificial intelligence identification technology.The monitoring system will cover various aspects of tunnel operations,such as the slope of the entrance,the structural safety of the cave body,toxic and harmful gases that may appear during operation,excessively high and low-temperature humidity,poor illumination,water leakage or road water accumulation caused by extreme weather,combustion and smoke caused by fires,and more.The system will enable comprehensive monitoring and early warning of fire protection systems,accident vehicles,and overheating vehicles.This will effectively improve safety during tunnel operation.

A Study on the Operating Model of Internet + QQ Farm

The'Internet+QQ farm'creative agriculture presented in this paper is the innovation based on the currently booming reality QQ farm,aimed at reducing cost,improving efficiency and optimizing human and material resource elements.It can make Internet provide technical support for intelligence-based life,leisure,entertainment,with good prospects for development.

Effect of internet multiple linkage mode-based extended care combined with in-hospital comfort care on colorectal cancer patients undergoing colostomy

BACKGROUND Patients with colorectal cancer may need postoperative nursing to improve prognosis,and conventional nursing is not effective.Clinical research is needed to explore nursing methods that can more effectively improve postoperative conditions on colorectal cancer patients undergoing colostomy.AIM To explore the effect of internet multiple linkage mode-based extended care combined with in-hospital comfort care on colorectal cancer patients undergoing colostomy.METHODS Data from 187 patients with colostomy treated in our hospital from May 2019 to March 2022 were collected and divided into three groups,A(n=62),B(n=62)and C(n=63),according to different intervention methods.Group A received internet multiple linkage mode-based extended care combined with in-hospital comfort care.Group B received internet multiple linkage mode-based extended care.Group C received usual care intervention.Complications were compared among the three groups.The stoma self-efficacy scale,Hamilton Anxiety Scale,RESULTS The complication rate of group A,B and C(16.13%,20.97%and 60.32%,respectively)was significantly different(all P<0.05).The incidence of complications in groups A and B was lower than that in group C,and there was no significant difference between groups A and B(P>0.05).After intervention,the scores of ostomy care,social contact,diet choice,confidence in maintaining vitality,confidence in self-care of ostomy,confidence in sexual life,confidence in sexual satisfaction and confidence in physical labor in the three groups were all higher than before intervention,and the scores of groups A and B were higher than those of group C,with statistical significance(P<0.05).The Hamilton Anxiety Scale and Hamilton Depression Scale scores of the three groups after intervention were lower than those before intervention.The scores of groups A and B were lower than those of group C,and the score of group A was lower than that of group B,all with statistical significance(all P<0.05).There was a statist-ically significant difference in cancer-induced fatigue among the three groups(P<0.05).After intervention,the scores of physical health,psychological health,social health and mental health of the three groups were lower than before the intervention.The scores of group A and B were lower than that of group C;and the score of group A was lower than that of group B,all with statistical significance(all P<0.05).CONCLUSION Internet multiple linkage mode-based extended care combined with in-hospital comfort care can effectively improve self-efficacy,bad mood,cancer-related fatigue and life quality of colorectal cancer patients undergoing colostomy.

Optimal selection of tests for fault detection and isolation in multi-operating mode system

The complex systems are often in the structure of multi-operating modes, and the components implementing system functions are different under different operation modes, which results in the problems that components often fail in different operating modes, faults can be only detected in specified operating modes, tests can be available in specified operating modes,and the cost and efficiency of detecting and isolating faults are different under different operating modes and isolation levels. Aiming at these problems, an optimal test selection method for fault detection and isolation in the multi-operating mode system is proposed by using the fault pair coding and rollout algorithm. Firstly,the faults in fault-test correlation matrices under different operating modes are combined to fault-pairs, which is used to construct the fault pair-test correlation matrices under different operating modes.Secondly, the final fault pair-test correlation matrix of the multioperating mode system is obtained by operating the fault pair-test correlation matrices under different operating modes. Based on the final fault pair-test correlation matrix, the necessary tests are selected by the rollout algorithm orderly. Finally, the effectiveness of the proposed method is verified by examples of the optimal test selection in the multi-operating mode system with faults isolated to different levels. The result shows that the proposed method can effectively mine the fault detection and isolation ability of tests and it is suitable for the optimal test selection of the multi-operating mode system with faults isolated to the replacement unit and specific fault.

An Improved Multi-Objective Hybrid Genetic-Simulated Annealing Algorithm for AGV Scheduling under Composite Operation Mode

This paper presents an improved hybrid algorithm and a multi-objective model to tackle the scheduling problem of multiple Automated Guided Vehicles(AGVs)under the composite operation mode.The multi-objective model aims to minimize the maximum completion time,the total distance covered by AGVs,and the distance traveled while empty-loaded.The improved hybrid algorithm combines the improved genetic algorithm(GA)and the simulated annealing algorithm(SA)to strengthen the local search ability of the algorithm and improve the stability of the calculation results.Based on the characteristics of the composite operation mode,the authors introduce the combined coding and parallel decoding mode and calculate the fitness function with the grey entropy parallel analysis method to solve the multi-objective problem.The grey entropy parallel analysis method is a combination of the grey correlation analysis method and the entropy weighting method to solve multi-objective solving problems.A task advance evaluation strategy is proposed in the process of crossover and mutation operator to guide the direction of crossover and mutation.The computational experiments results show that the improved hybrid algorithm is better than the GA and the genetic algorithm with task advance evaluation strategy(AEGA)in terms of convergence speed and solution results,and the effectiveness of the multi-objective solution is proved.All three objectives are optimized and the proposed algorithm has an optimization of 7.6%respectively compared with the GA and 3.4%compared with the AEGA in terms of the objective of maximum completion time.

The Application of PDCA Circulation Method in Improving the Application of Internet + Smart First Aid in the Treatment of Preoperative Patients with Severe Neurological Diseases

Objective: To investigate the application and feasibility of PDCA circulation method in the treatment of patients with severe neurological diseases in Internet + smart first aid, with a view to promoting the sustainable construction of smart first aid. Methods: A total of 105 patients with severe neurological diseases in Zhuji people’s Hospital and cooperative units were selected, and 52 cases in the research group and 53 cases in the control group were divided according to the single and double number visiting time: In this paper, through reading the literature, the development of Internet + wisdom first aid treatment of patients with severe neurological diseases was investigated, and the common problems were analyzed and summarized, and the research group used the PDCA circulation method to sort out the existing problems, analyze the causes of the problems and improve them. The difference in treatment time between the two groups was compared, and the patient’s satisfaction was evaluated for the time of being transferred to the hospital emergency room by 120 ambulances, the time from emergency admission to surgery (Cath lab), and the satisfaction of the patient. Results: The time from emergency treatment to the operation room (catheter room) in the study group was significantly shortened, and patient satisfaction was significantly improved compared with that in the control group, with a statistically significant difference (P Conclusion: Through the application of PDCA circulation method in the Internet + smart emergency treatment of neurologically severe preoperative patients, the Internet + smart emergency mode can be continuously improved, the treatment process can be significantly optimized, the first aid time can be shortened, and the treatment efficiency of neurocritical ill patients can be improved. Therefore, it has been expected to improve the success rate of treatment and improve the success rate of neurological patients.

Low Power Consumption Distributed-Feedback Quantum Cascade Lasers Operating in Continuous-Wave Mode above 90℃ at λ～7.2μm

We report on the design and fabrication of λ-7.2μm distributed feedback quantum cascade lasers lot very high temperature cw operation and low electrical power consumption. The cw operation is reported above 90℃. For a 2-mm-long and 10-μm-wide laser coated with high-reflectivity on the rear facet, more than 170mW of output power is obtained at 20℃ with a threshold power consumption of 2.4 W, corresponding to 30mW with a threshold power consumption of 3.9 W at 90℃. Robust single-mode emission with a side-mode suppression ratio above 25 dB is continuously tunable by the heat sink temperature or injection current.

Multimode Design and Analysis of an Integrated Leg-Arm Quadruped Robot with Deployable Characteristics

To improve locomotion and operation integration, this paper presents an integrated leg-arm quadruped robot(ILQR) that has a reconfigurable joint. First, the reconfigurable joint is designed and assembled at the end of the legarm chain. When the robot performs a task, reconfigurable configuration and mode switching can be achieved using this joint. In contrast from traditional quadruped robots, this robot can stack in a designated area to optimize the occupied volume in a nonworking state. Kinematics modeling and dynamics modeling are established to evaluate the mechanical properties for multiple modes. All working modes of the robot are classified, which can be defined as deployable mode, locomotion mode and operation mode. Based on the stability margin and mechanical modeling, switching analysis and evaluation between each mode is carried out. Finally, the prototype experimental results verify the function realization and switching stability of multimode and provide a design method to integrate and perform multimode for quadruped robots with deployable characteristics.

Oxidization resistance of Ni76Cr19AlTi valve alloy at temperatures under operating mode of heavy-duty engines

The oxidization resistance of the Ni76Cr19A1Ti alloy was studied by a static oxidization experiment at 600-800℃. The results show that the oxidation behavior of the alloy can be explained by a kinetic equation： （△m/S）2 = Kpt ＋ C, where Kp is a kinetic constant of the nickel-base alloy. The higher the experimental temperature, the higher the value of Kp. It is discovered that the microstructure of the oxide scales is compact and the thickness of it is less than 10 μm The oxidization of the alloy is in the first grade. It is also found that the oxide scales are mainly composed of Cr2O3 and TiO2. Chrome and titanium react more easily with oxygen at temperatures under the operating mode.

Operation Modes and Control Schemes for Internet-Based Teleoperation System with Time Delay

Teleoperation system plays an important role in executing task under hazard environment. As the computer networks such as the Internet are being used as the communication channel of teleoperation system, varying time delay causes the overall system unstable and reduces the performance of transparency. This paper proposed twelve operation modes with different control schemes for teleoperation on the Internet with time delay. And an optimal operation mode with control scheme was specified for teleoperation with time delay, based on the tradeoff between passivity and transparency properties. It experimentally confirmed the validity of the proposed optimal mode and control scheme by using a simple one DOF master-slave manipulator system.

Study of Axisymmetric Infinite Guide Lined with Locally Reacting Material without Flow Using DtN Operators

The present work proposed a new method for the modeling by the finite element method of the acoustic propagation problems in infinite axisymmetric cylindrical guides lined with locally reacting absorbent materials without flow. The method deals with the development of an efficient transparent boundary condition based on DtN operators. The method developed in this study is successfully applied to a straight axisymmetric lined guide by imposing a mode on one of the artificial boundaries of the truncated guide. The results are in good agreement with analytical solutions. Applying the method for a non-uniform axisymmetric lined guide which is a complex case, proved its effectiveness and the results compared to those of PML layers are in very good agreement.

Analysis on the Teaching Mode of Chinese-foreign Cooperatively-run Higher Institutions in the Context of Internet+

Under the background of“Internet+”,the development of Sino-foreign cooperatively-run higher institutions have changed significantly.Relying on the“Internet+”,exploring new teaching directions has become the focus of attention of relevant personnel.After understanding the influence of“Internet+”on Sino-foreign cooperatively-run higher institutions,this paper analyzes the problems in the traditional mode of teaching,and puts forward the teaching mode for“Internet+”with English as an example.The results of this paper show that the emergence of“Internet+”technology has promoted the development of English teaching mode,so relevant personnel should face up to the positive impact of“Internet+”and explore new teaching paths.Only in this way can we constantly adapt to the future teaching needs.

Discussion on Biomass Fuel Operation Model Dominated by Tobacco Straw

With the gradually popularization of replacing coal tobacco leaf flue-curing technology with biomass fuel, the operation of raw materials collection and transportation links faces many problems. In this paper, the existing problems in view of biomass fuel operation dominated by tobacco straw in current tobacco leaf flue-curing were analyzed, and the 3 kinds of fuel operation modes （＂contracting processing mode, displacement mode and commercialization mode＂） were put forward, each of which was also briefly analyzed, with the aim to expand the way of thinking about biomass raw materials processing by cooperative organization.

Study on the Roles of a Teacher in College English Teaching Mode Based on the Internet

With the rapid development of modern technology and all-round reform in national college English teaching,Internet-Based teaching mode has become a new trend of college English teaching.Therefore,in the new teaching mode,the teacher should turn an inculcator into an instructor,facilitator and participant in teaching;a passive user of textbook into a dominant and modeler of courses;a planner of teaching specific tasks into an organizer of teaching process,a helper and shepherd of learning knowledge.

Stable single-mode operation of 894.6 nm VCSEL at high temperatures for Cs atomic sensing

In this paper, stable single-mode operation at high temperatures is produced by the surface-relief-integrated vertical cavity surface emitting laser（VCSEL）. The gain-cavity mode detuning technique is employed to realize high operating temperatures for the VCSEL. The surface relief is etched in the centre of the top side as a mode discriminator for the fundamental mode output, and the threshold current minimum is 1.94 mA at high temperatures by the gain-cavity mode detuning technique. Maximum single-fundamental-mode output power of 0.45 mW at 80℃ is obtained, and the side mode suppression ratios（SMSRs） are more than 30 dB with increasing temperature and current, respectively.