Co-doped BaFe_(2)As_(2) Josephson junction fabricated with a focused helium ion beam

Josephson junction plays a key role not only in studying the basic physics of unconventional iron-based superconductors but also in realizing practical application of thin-film based devices,therefore the preparation of high-quality iron pnictide Josephson junctions is of great importance.In this work,we have successfully fabricated Josephson junctions from Co-doped BaFe_(2)As_(2)thin films using a direct junction fabrication technique which utilizes high energy focused helium ion beam(FHIB).The electrical transport properties were investigated for junctions fabricated with various He^(+)irradiation doses.The junctions show sharp superconducting transition around 24 K with a narrow transition width of 2.5 K,and a dose correlated foot-structure resistance which corresponds to the effective tuning of junction properties by He^(+)irradiation.Significant J_c suppression by more than two orders of magnitude can be achieved by increasing the He^(+)irradiation dose,which is advantageous for the realization of low noise ion pnictide thin film devices.Clear Shapiro steps are observed under 10 GHz microwave irradiation.The above results demonstrate the successful fabrication of high quality and controllable Co-doped BaFe_(2)As_(2)Josephson junction with high reproducibility using the FHIB technique,laying the foundation for future investigating the mechanism of iron-based superconductors,and also the further implementation in various superconducting electronic devices.

Influence of extraction voltage on electron and ion behavior characteristics

The characteristics of the extracted ion current have a significant impact on the design and testing of ion source performance.In this paper,a 2D in space and 3D in velocity space particle in cell(2D3V PIC)method is utilized to simulate plasma motion and ion extraction characteristics under various initial plasma velocity distributions and extraction voltages in a Cartesian coordinate system.The plasma density is of the order of 10^(15)m^(-3)-10^(16)m^(-3)and the extraction voltage is of the order of 100 V-1000 V.The study investigates the impact of various extraction voltages on the velocity and density distributions of electrons and positive ions,and analyzes the influence of different initial plasma velocity distributions on the extraction current.The simulation results reveal that the main reason for the variation of extraction current is the spacecharge force formed by the relative aggregation of positive and negative net charges.This lays the foundation for a deeper understanding of extraction beam characteristics.

Uniformity Control of Scanned Beam in 300 MeV Proton and Heavy Ion Accelerator Complex at SESRI

In recent years,heavy ion accelerator technology has been rapidly developing worldwide and widely applied in the fields of space radiation simulation and particle therapy.Usually,a very high uniformity in the irradiation area is required for the extracted ion beams,which is crucial because it directly affects the experimental precision and therapeutic effect.Specifically,ultra-large-area and high-uniformity scanning are crucial requirements for spacecraft radiation effects assessment and serve as core specification for beamline terminal design.In the 300 MeV proton and heavy ion accelerator complex at the Space Environment Simulation and Research Infrastructure(SESRI),proton and heavy ion beams will be accelerated and ultimately delivered to three irradiation terminals.In order to achieve the required large irradiation area of 320 mm×320 mm,horizontal and vertical scanning magnets are used in the extraction beam line.However,considering the various requirements for beam species and energies,the tracking accuracy of power supplies(PSs),the eddy current effect of scanning magnets,and the fluctuation of ion bunch structure will reduce the irradiation uniformity.To mitigate these effects,a beam uniformity optimization method based on the measured beam distribution was proposed and applied in the accelerator complex at SESRI.In the experiment,the uniformity is successfully optimized from 75%to over 90%after five iterations of adjustment to the PS waveforms.In this paper,the method and experimental results were introduced.

Isothermal hydrogen absorption process of Pd-capped Mg films traced by ion beam techniques and optical methods

Pd-capped nanocrystalline Mg films were prepared by electron beam evaporation and hydrogenated under isothermal conditions to inves-tigate the hydrogen absorption process via ion beam techniques and in situ optical methods.Films were characterized by different techniques such as X-ray diffraction(XRD)and scanning electron microscopy(SEM).Rutherford backscattering spectrometry(RBS)and elastic recoil detection analysis(ERDA)provided a detailed compositional depth profile of the films during hydrogenation.Gas-solid reaction kinetics theory applied to ERDA data revealed a H absorption mechanism controlled by H diffusion.This rate-limiting step was also confirmed by XRD measurements.The diffusion coefficient(D)was also determined via RBS and ERDA,with a value of(1.1±0.1)·10^(−13)cm^(2)/s at 140℃.Results confirm the validity of IBA to monitor the hydrogenation process and to extract the control mechanism of the process.The H kinetic information given by optical methods is strongly influenced by the optical absorption of the magnesium layer,revealing that thinner films are needed to extract further and reliable information from that technique.

Half-integer Shapiro steps in MgB_(2) focused He ion beam Josephson junctions

Half-integer microwave induced steps(Shapiro steps)have been observed in many different Josephson junction systems,which have attracted a lot of attention because they signify the deviation of current phase relation(CPR)and uncover many unconventional physical properties.In this article,we first report the discovery of half-integer Shapiro steps in MgB_(2)focused He ion beam(He-FIB)Josephson junctions.The half-integer steps'dependence on microwave frequency,temperature,microwave power,and magnetic field is also analyzed.We find that the existence of half-integer steps can be controlled by the magnetic field periodically,which is similar to that of high temperature superconductor(HTS)grain boundary junctions,and the similarity of the microstructures between gain boundary junctions and He-FIB junctions is discussed.As a consequence,we mainly attribute the physical origin of half-integer steps in MgB_(2)He-FIB junctions to the model that a He-FIB junction is analogous to a parallel junctions'array.Our results show that He-FIB technology is a promising platform for researching CPR in junctions made of different superconductors.

Preliminary Study on the Low Energy Ion Beam Mediated Parameters with Fractional Factorial Design Method

[Objective] The aim was to explore the biological effect of low energy ion beam mediated parameters with fractional factorial design method. [Method] The twin-embryos seed of autotetraploid rice DER10-04-01 was taken as the receptor material,and the Elymus dahuricus Turcz. was used as materials to provide DNA to carry out the ion beam mediated experiment. And the fractional factorial design method was used to study the parameters of low enery N＋ ion beam mediated foreign genes into rice. [Result] The implantation energy,dose,DNA concentrations and immersion time of DNA showed significant biological effects on the normal growth and development of DER10-04-01,in which the biological effects of implantation dose and DNA concentrations were relatively obvious. [Conclusion] The implantation energy,dose,DNA concentrations and immersion time of DNA were major factors showing important effects on the experimental result in ion beam mediated foreign genetic materials.

Characterization of Ga NAs/ Ga As and Ga In NAs/ Ga As Quantum Wells Grown by Plasma-Assisted Molecular Beam Epitaxy: Effects of Ion Damage

The effects of ion damage on Ga NAs/Ga As and Ga In NAs/Ga As quantum wells ( QWs) grown by plas- ma- assisted molecular beam epitaxy have been investigated. Itis found thation damage is a key factor affecting the quality of Ga NAs and Ga In NAs QWs. Obvious appearance of pendello¨ sung fringes in X- ray diffraction pattern and remarkable im provement in the optical properties of the samples grown with ion removal magnets are observed.By removing nitrogen ions,the PL intensity of the Ga In NAs QW is improved so as to be comparable with that of Ga In As QW. The stronger is the magnetic field,the m ore obvious the PL intensity im provement would be.

Cu_2ZnSnS_4 thin films prepared by sulfurization of ion beam sputtered precursor and their electrical and optical properties

Cu2ZnSnS4 (CZTS) thin films were successfully prepared by sulfurization of ion bean sputtered precursors on soda-lime glass substrate. The single phase of stannite-type structure CZTS films were obtained as revealed in EDS and XRD analysis when the ratios of the constituents of CZTS thin films are close to stoichiometric by optimizing the conditions of precursor preparation and sulfurization. A low sheet resistivity as about 0.156 Ω·cm and a high absorption coefficient as 1×104 cm-1 were achieved in this method by Hall effect measurements and UV-VIS spectrophotometer. The optical band-gap energy of the CZTS sample is about 1.51 eV, which is very close to the optimum value for a solar-cell absorber.

Design and preliminary results of beam return on of high power ion source

Long pulse operation of high power ion source is the requirement of fusion science research on neutral beam injector. A breakdown of accelerator column is drastically increased when operating with high beam energy and long beam duration. To extend the pulse length, which was stopped with every breakdown so far, the beam re-starting technology was developed and utilized. As a result, the voltage drop of every power supply due to breakdown was recovered within a time of 90 ms and beam pulse length was extended much longer than the case before this improvement. The details of the beam re-starting technology and the preliminary results were presented in this manuscript.

Preliminary Results of Ion Beam Extraction Tests on EAST Neutral Beam Injector

The neutral beam injection （NBI） system is one of the most important auxiliary plasma heating and current driving methods for fusion device. A high power ion beam of 3 MW with 80 keV beam energy in 0.5 s beam duration and a long pulse ion beam of 4 s with 50 keV beam energy ion beam extraction were achieved on the EAST neutral beam injector on the teststand. The preliminary results show that the EAST-NBI system was developed successfully on schedule.

Mimicking a Superhydrophobic Insect Wing by Argon and Oxygen Ion Beam Treatment on Polytetrafluoroethylene Film

Biological tiny structures have been observed on many kinds of surfaces such as lotus leaves and insect wings,which enhance the hydrophobicity of the natural surfaces and play a role of self-cleaning.We presented the fabrication technology of a superhydrophobic surface using high energy ion beam.Artificial insect wings that mimic the morphology and the superhydrophobocity of cicada's wings were successfully fabricated using argon and oxygen ion beam treatment on a polytetrafluoroethylene (PTFE)film.The wing structures were supported by carbon/epoxy fibers as artificial flexible veins that were bonded through an autoclave process.The morphology of the fabricated surface bears a strong resemblance to the wing surface of a cicada,with contact angles greater than 160°,which could be sustained for more than two months.

Crossed Molecular Beam Study of H＋CH4 and H＋CD4 Reactions： Vibrationally Excited CH3/CD3 Product Channels

We study the H＋CH4/CD4-＋H2/HD＋CH3/CD3 reactions using the time sliced velocity map ion imaging technique. Ion images of the CH3/CD3 products were measured by the （2＋1） resonance enhanced multi-photon ionization （REMPI） detection method. Besides the CH3/CD3 products in the ground state, ion images of the vibrationally excited CH3/CD3 products were also observed at two collision energies of 0.72 and 1.06 eV. It is shown that the angular distribution of the products CH3/CD3 in vibrationally excited states gradually vary from backward scattering to sideways scattering as the collision energy increases. Compared to the CH3/CD3 products in the ground state, the CH3/CD3 products in vibrationally excited states tend to be more sideways scattered, indicating that larger impact parameters play a more important role in the vibrationally excited product channels.

Study on the Variation of the Distant Crossing Rice by Ion Beam Implantation

In this paper, the following contents including the original receptor EI213 and other two control materials, RAPD polymorphism, photosynthetic efficiency, and the number of vascular bundles of the first internodes below the peduncle have been studied for the eight F7 transgenic lines obtained from ion beam implantation. The results showed that there was a significant variation in genomes of maize-rice line, compared with the receptor EI213, after the total exogenous maize DNA was introduced into EI213. The number of the vascular bundles of maize-rice progeny’s lines was obviously much larger than those of the original receptor EI213 and other two controls GER-3 and MH63, and along with the photosynthetic efficiency of maize-rice progeny’s lines being gone up. Moreover, the parenchyma cells around the vascular bundles of the transgenic lines became much larger in number and in size than those around the controls. All these indicated that the maize-rice progeny’s lines are really different from and superio

CORROSION BEHAVIOR OF Cu-Nb AND Ni-Nb AMORPHOUS FILMS PREPARED BY ION BEAM ASSISTED DEPOSITION

The Cu25 Nb75 and Ni45Nb55 amorphous films with about 500nm thickness were prepared by ion beam assisted deposition (IBAD). Potentiodynamic polarization measurement was adopted to investigate the corrosion resistance of samples and the tests were carried out respectively in 1mol/L H2SO4 and NaOH aquatic solution. The corrosion performance of the amorphous films was compared with that of multilayered and pure Nb films. Experimental results indicated that the corrosion resistance of amorphous films was better than that of the corresponding multilayers and pure Nb films for both Ni-Nb system with negative heat of formation and Cu-Nb system with positive heat of formation.

Preliminary Studies on Base Substitutions and Repair of DNA Mismatch Damage Stimulated by Low Energy N^+ Ion Beam Implantation in Escherichia coli

Ever since the low energy N+ ion beam has been accepted that the mutation effects of ionizing radiation are attributed mainly to direct or indirect damage to DNA. Evidences based on naked DNA irradiation in support of a mutation spectrum appears to be consistent, but direct proof of such results in vivo are limited. Using mutS, dam and/or dcm defective Eschericha coli imitator strains, an preliminary experimental system on induction of in vivo mutation spectra of low energy N+ ion beam has been established in this study. It was observed that the mutation rates of rifampicin resistance induced by N+ implantation were quite high, ranging from 9.2 x 10~8 to 4.9× 10~5 at the dosage of 5.2×1014 ions/cm2. Strains all had more than 90-fold higher mutation rate than its spontaneous mutation rate determined by this method. It reveals that base substitutions involve in induction of mutation of low energy nitrogen ion beam implantation. The mutation rates of mutator strains were nearly 500-fold (GM2929), 400-fold (GM5864) and 6-fold larger than that of AB1157. The GM2929 and GM5864 both lose the ability of repair DNA mismatch damage by virtue of both dam and dcm pathways defective (GM2929) or failing to assemble the repair complex (GM5864) respectively. It may explain the both strains had a similar higher mutation rate than GM124 did. It indicated that DNA cytosine methylase might play an important role in mismatch repair of DNA damage induced by N+ implantation. The further related research were also discussed.

Lifetime measurement of the 3d^(9) ^(2)D_(3/2) metastable level in Mo^(15+)at an electron beam ion trap

An experimental measurement of the lifetime of 3d^(9) ^(2)D_(3/2) metastable level in Mo^(15+)is reported in this work.The Mo^(15+)ions are produced and trapped in an electron beam ion trap with a magnetic field of 0.65 T.The decay photons emitted from 3d^(9) ^(2)D_(3/2) level are subsequently recorded via a cooled photomultiplier tube.Through meticulous scrutiny of potential systematic uncertainties affecting the measurement outcomes,we have determined the lifetime of Mo^(15+)3d^(9)2D_(3/2)metastable level to be 2.83(22)ms.The experimental result provides a clear distinguishment from existing calculations based on various theoretical approaches.

Metallographic sample prepared by ion beam etching

Ion beam etching technique was used to reveal the metallograhpic microstructure and interface morphology of electroplating chromium coating, in particular, whose substrate surface layer was treated in advance by laser quenching. Chemical etchings were also conducted for comparison. The reveal microstructures were observed and analyzed by scanning electron microscopy. The results show that ion beam etching can reveal well the whole microstructures of composite coating-substrate materials.

Characteristics of the pressure profile in the accelerator on the RF negative ion source at ASIPP

Neutral beam injection(NBI)systems based on negative hydrogen ion sources-rather than the positive ion sources that have typically been used to date-will be used in the future magnetically confined nuclear fusion experiments to heat the plasma.The collisions between the fast negative ions and neutral background gas result in a significant number of high-energy positive ions being produced in the acceleration area,and for the high-power long-pulse operation of NBI systems,this acceleration of positive ions back to the ion source creates heat load and material sputtering on the source backplate.This difficulty cannot be ignored,with the neutral gas density in the acceleration region having a significant impact on the flux density of the backstreaming positive ions.In the work reported here,the pressure gradient in the acceleration region was estimated using an ionization gauge and a straightforward 1D computation,and it was found that once gas traveled through the acceleration region,the pressure dropped by nearly one order of magnitude,with the largest pressure drop occurring at the plasma grid.The computation also revealed that the pressure drop in the grid gaps was substantially smaller than that in the grid apertures.

The Arc Regulation Characteristics of the High-Current Ion Source for the EAST Neutral Beam Injector

The arc regulation method is applied to the high-current ion source for high-power hydrogen ion beam extraction for the first time. The characteristics of the arc and beam, including the probe ion saturation current, the arc power and the beam current, are studied with feedback control. The results show that the arc regulation method can be successfully applied to ion beam extraction. This lays a sound foundation for the testing of a new ion source and the operation of a conditioned ion source for neutral beam injector devices.

Protective Effects of Shikonin on Brain Injury Induced by Carbon Ion Beam Irradiation in Mice

Radiation encephalopathy is the main complication of cranial radiotherapy. It can cause necrosis of brain tissue and cognitive dysfunction. Our previous work had proved that a natural antioxidant shikonin possessed protective effect on cerebral ischemic injury. Here we investigated the effects of shikonin on carbon ion beam induced radiation brain injury in mice. Pretreatment with shikonin significantly increased the SOD and CAT activities and the ratio of GSH/GSSG in mouse brain tissues compared with irradiated group （P〈0.01）, while obviously reduced the MDA and PCO contents and the RO$ levels derived from of the brain mitochondria.