Preparation and adsorption behaviors of Cu(Ⅱ) ion-imprinted polymers

Imprinted polymers were prepared for selective removal of Cu（Ⅱ） ions from metal solutions. Three ion-imprinted polymers were synthesized with methacrylic acid （MAA）, acrylamide （AA） and N,N＇-methylenebisacrylamide （MBAA） respectively as the functional monomers, ethleneglycoldimethacrylate （EGDMA） as the cross-linking agent, 2,2＇- azobisisobutyronitrile （AIBN） as the initiator and Cu （Ⅱ） ion as the imprint ion. The template Cu （Ⅱ） ion was removed from the polymer by leaching with a liquid of a 1：1 volumetric ratio of HCl to ethylenediaminetetraacetic acid （EDTA）. The capacity and selectivity of Cu（Ⅱ） ion adsorption were investigated with the three imprinted polymers and their non-imprinted counterparts. The polymers have a maximum adsorption capacity at pH 7.0. The isotherm of their batch adsorption of Cu（Ⅱ） ions shows a Langmuir adsorption pattern. Imprinted polymers all have a much higher capacity and higher selectivity of Cu（Ⅱ） adsorption than nonimprinted ones. MAA polymer benefits the most from imprinting. Imprinted MAA polymer has the highest selectivity when used to rebind Cu （Ⅱ） ion from an aqueous solution in the presence of other metal ions. Ion imprinting can be a promising technique of preparing selective adsorbents to separate and preconcentrate metal in a medium of multiple competitive metal ions through solid phase extraction （SPE）.

Ion imprinted polymer particles of neodymium:synthesis,characterization and selective recognition

Neodymium ion imprinted polymer（Nd^3＋-IIP） particles for selective solid-phase extraction of Nd^3＋ were prepared and determined with inductively coupled plasma atomic emission spectrometry（ICP-AES）.The unleached Nd^3＋-IIP particles were prepared by the copoly-merization of Nd^3＋-5,7-dichloroquinoline-8-ol-4-vinylpyridine ternary complex with styrene and divinyl benzene, then Nd^3＋ was leached to obtain Nd^3＋-IIP particles.The adsorption capacity of the Nd3＋-IIP was 35.18 mg/g.The largest selectivity coefficient for Nd3＋ in the presence of competitive ions such as La^3＋, Ce^3＋, Pr^3＋ and Sm^3＋ was over 110.The proposed method was validated by analyzing two certified reference materials（GBW07301a sediment and GBW07401 soil） and the determined values were in a good agreement with standard values.The method was convenient, selective, sensitive and applicable to the determination of trace Nd^3＋ in environmental samples with complicated matrix.

Sensitivity Enhancement in Uranium Determination by UV-Visible Spectroscopy Using Ion Imprinted Polymer

There is need to determination of uranium concentration at ppb level in environmental matrices.Due to low sensitivity of FAAS,UV-Visible Spectroscopy is generally used as measurement technique.In this study,ion-imprinted polymers(IIP)were prepared for uranyl ion(imprint ion)by formation of ternary(salicylaldoxime and 4-vinylpyridine)complex in 2-methoxy ethanol(porogen)following copolymerization with methacrylic acid(MAA)as a functional monomer and ethylene glycol dimethacrylate(EGDMA)as crosslinking monomer using 2,2-azobisisobutyronitrile as initiator.The synthesized polymers were characterized by FTIR and TGA analysis.ArsenazoⅢin 3M HClO_4 was used as complexing agent in the measurement step.The optimal pH for preconcentration was found to be between 3.5~6.5values.The developed method was applied to uranium(Ⅵ)determination in natural water samples.

AN IMPRINTED POLYMER FOR REMOVAL OF Cd^(2+) FROM WATER SAMPLES:OPTIMIZATION OF ADSORPTION AND RECOVERY STEPS BY EXPERIMENTAL DESIGN

A new ion-imprinted polymer （liP） was synthesized by copolymerization of 4-vinylpyridine （monomer）, ethyleneglycoldimethacrylate （cross-linker） and 2,2-azobis-isobutyronitrile （initiator） in the presence of Cd2＋ and quinaldic acid （complexing agent）. It was found that the adsorption capacity of IIP and blank polymer were 45.0 and 6.2 mg g-l, respectively. The relative selectivity coefficients of the imprinted polymer for different binary mixture were also calculated. Compared to non-imprinted polymer （NIP）, the IIP had higher selectivity for Cd（II）. The IIP was used as a sorbent for cadmium extraction from water samples by using a simple batch extraction procedure. The effect of different parameters on Cd2＋ extraction and its recovery from the IIP were evaluated and optimized by using experimental design methodology. The optimized adsorption/desorption procedure was applied for cadmium removal from the real water samples. The obtained recoveries proved that this IIP could be used for removal of trace cadmium ions from water samples.