Advancing ophthalmic delivery of flurbiprofen via synergistic chiral resolution and ion-pairing strategies

Flurbiprofen(FB),a nonsteroidal anti-inflammatory drug,is widely employed in treating ocular inflammation owing to its remarkable anti-inflammatory effects.However,the racemic nature of its commercially available formulation(Ocufen^(R))limits the full potential of its therapeutic activity,as the(S)-enantiomer is responsible for the desired antiinflammatory effects.Additionally,the limited corneal permeability of FB significantly restricts its bioavailability.In this study,we successfully separated the chiral isomers of FB to obtain the highly active(S)-FB.Subsequently,utilizing ion-pairing technology,we coupled(S)-FB with various counter-ions,such as sodium,diethylamine,trimethamine(TMA),and l-arginine,to enhance its ocular bioavailability.A comprehensive evaluation encompassed balanced solubility,octanol-water partition coefficient,corneal permeability,ocular pharmacokinetics,tissue distribution,and in vivo ocular anti-inflammatory activity of each chiral isomer salt.Among the various formulations,S-FBTMA exhibited superior water solubility(about 1–12 mg/ml),lipid solubility(1<lgP_(ow)<3)and corneal permeability.In comparison to Ocufen^(R),S-FBTMA demonstrated significantly higher in vivo antiinflammatory activity and lower ocular irritability(such as conjunctival congestion and tingling).The findings from this research highlight the potential of chiral separation and ion-pair enhanced permeation techniques in providing pharmaceutical enterprises focused on drug development with a valuable avenue for improving therapeutic outcomes.

Ion-Pair Photodissociation of Trichloromonofluoromethane

fragments, F- and Cl- including two isotope species 35Cl- and 37Cl-, are observed in the photoexcitations of CFC13. The ion-pair anion efficiency spectra of 35Cl- and 37Cl- are recorded in the photon energy range of 7.75-22.00 eV. The threshold of ion-pair dissociation CFCl3-CFC12＋＋Cl- is experimentally determined to be 7.944-0.04 eV. With the references of the high-resolution photoabsorption spectra reported in the literatures, we make tentative assignments of the electron valence-to-Rydberg transitions. Furthermore, the multibody ion-pair fragmentation processes to Cl- are discussed by comparison between the calculated thermochemical thresholds and the experimental efficiency spectrum.

Ion-pairing HPLC methods to determine EDTA and DTPA in small molecule and biological pharmaceutical formulations

Ion-pairing high-performance liquid chromatography-ultraviolet （HPLC-UV） methods were developed to determine two commonly used chelating agents, ethylenediaminetetraacetic acid （EDTA） in Abilify （a small molecule drug with aripiprazole as the active pharmaceutical ingredient） oral solution and die- thylenetriaminepentaacetic acid （DTPA） in Yervoy （a monoclonal antibody drug with ipilimumab as the active pharmaceutical ingredient） intravenous formulation. Since the analytes, EDTA and DTPA, do not contain chromophores, transition metal ions （Cu2＋, Fe3＋） which generate highly stable metallocom- plexes with the chelating agents were added into the sample preparation to enhance UV detection. The use of metallocomplexes with ion-pairing chromatography provides the ability to achieve the desired sensitivity and selectivity in the development of the method. Specifically, the sample preparation in- volving metallocomplex formation allowed sensitive UV detection. Copper was utilized for the de- termination of EDTA and iron was utilized for the determination of DTPA. In the case of EDTA, a gradient mobile phase separated the components of the formulation from the analyte. In the method for DTPA, the active drug substance, ipilimumab, was eluted in the void. In addition, the optimization of the concentration of the ion-pairing reagent was discussed as a means of enhancing the retention of the aminopolycarboxylic acids （APCAs） including EDTA and DTPA and the specificity of the method. The analytical method development was designed based on the chromatographic properties of the analytes, the nature of the sample matrix and the intended purpose of the method. Validation data were presented for the two methods. Finally, both methods were successfully utilized in determining the fate of the chelates.

A Method for Detection of Trace Concentrations of Underivatized Amino Acid in Hydrothermal Fluids by Ion-Pairing Reversed-Phase UPLC-ESI-QTOF-MS

Investigation of amino acids in hydrothermal systems is of prime importance for the understanding of geochemistry and microbiology of hydrothermal vents and plumes, for carbon and metals global cycles, for metabolism of some hydrothermal microorganisms and for the origin of life issue. Extensive theoretical and experimental work on amino acids behaviour in hydrothermal fluids has been done, conversely only few data exist on natural samples. Because each hydrothermal vent is unique, the more data we collect the better we will be able to address each of these questions. Usually amino acids in hydrothermal fluids have been measured by HPLC-FLD. The chromatographic separation was at least 26 min and up to 135 min and the required derivatization step may be time consuming, may use harmful chemicals and may be source of contamination. Alternatively, we describe here a method combining quickness (4.5 min), high resolution (10,000), very low LOD (sub-ppb) and without derivatization. Characterisation and separation of 10 relevant proteinogenic underivatized amino acids was achieved by ion-pairing reversed-phase Ultra-high Performance Liquid Chromatography-Electrospray Ionisation-Quadrupole Time of Flight-Mass Spectrometry (UPLC-ESI-QTOF-MS). Excellent linearity in the response was obtained for all amino acids with correlation coefficients > 0.9921. This method was successfully applied to natural hydrothermal fluid samples from ultramafic-hosted vents of the Mid-Atlantic Ridge region. Results are consistent with the only 2 other studies published on ultramafic-hosted vents and complete the few available data.

Synthesis and Crystal Structure of a Novel Ion-pair Compound Consisting of 1-(4-Bromobenzyl)pyridinium Cation and 7,7,8,8-Tetracyanoquinodimethanide Anion

The title compound [BrBzPy][TCNQ] （BrBzPy^＋=1-（4-bromobenzyl）pyridinium cation, TCNQ = 7,7,8,8-tetracyanoquinodimethanide anion） was synthesized by the reaction of [BrBzPy]Br and LiTCNQ in ethanol solution and its structure was determined by single-crystal X-ray diffraction. The crystal belongs to monoclinic, space group P21/c with a = 14.067（3）, b = 7.3089（14）, c = 23.796（4）A, β = 122.011（9）°, V= 2074.6（7）A^3, Z = 4, C24H15BrN5, Mr = 453.32, Dc = 1.451 g/cm^3,μ = 2.002 mm^-1, S = 1.047, F（000） = 916, R = 0.0398 and wR = 0.0921. The most prominent structural features are the completely segregated stacking columns of the TCNQ- anions and [BrBzPy]^＋ cations. In a TCNQ column, the centroid-to-centroid distances of the neighboring anions of TCNQ are 3.2693 and 4.9464 A, respectively.

The Quantum Scattering Study for Ion-pair Formation Reaction Na+I_2→Na^+I_2^- with the LCAC-SW method

The selected-state probabilities of collinear ion-pair formation process Na+I2→Na++I2-on Aten-Laming-Los two-State potential energy surface have been calculated by using LCAC-SW method. The results show that reaction probabilities are oscillatory with collision energy; the threshold energy of this ioniZation reaction is 2.8 ev, which is in modest agreement with experimental result.

Synthesis and Crystal Structure of a Novel Ion-pair Compound Consisting of 1,3-Bis(4-cynobenzyl) Imidazole Cation and 7,7,8,8-Tetracyanoquinodimethanide Anion

A novel compound [（CNBz）2Im]2（TCNQ）3（CH3CN）（（CNBz）2Im = 1,3-bis（4-cyano-benzyl） imidazole cation,TCNQ-1 = 7,7,8,8-tetracyanoquinodimethanide anion） was synthesized by the reaction of [（CNBz）2Im]Br and LiTCNQ in water and its structure was determined by single-crystal X-ray diffraction.The crystal belongs to monoclinic,space group P21/c with a = 10.1823（17）,b = 20.292（3）,c = 16.952（3） ,β = 104.73（0）°,V = 3387.6（10）3,Z = 4,C39H24N11,Mr = 646.69,Dc = 1.268 g/cm3,μ = 0.080 mm-1 and F（000） = 1340.The structure was solved by direct methods and refined to R = 0.0596 and wR = 0.0911 for 2690 observed reflections（Ⅰ 〉 2σ（Ⅰ））.The most prominent structural feature is that there are two types of TCNQ entries（TCNQ-1 and TCNQ0） in agreement with the IR spectra analysis of the compound.

Ion-pair induced solvent extraction of lithium(Ⅰ)from acidic chloride solutions with tributyl phosphate

Lithium(Li)is an important energy metal in the 21st century.However,the selective recovery of Li is still a big challenge,especially from acidic solutions with multiple metal ions existence.Herein we report a new ion pair induced mechanism for selectively extracting Li^(+)from acidic chloride solutions by tributyl phosphate(TBP).It is shown that the acidity and the chloride ions in the aqueous phase have great effects on the extraction of Li^(+).The FT-IR,UV-Vis and ESI-MS experiments provide solid evidence for the formation of ion-pair complex[Li(TBP)_n(H_(2)O)_(m)]^(+)[FeCl_(4)]^(-)(n-1,2,3;m-0,1)in the organic phase,which brings about the effective and efficient extraction of Li^(+).This mechanism can overcome the Hofmeister bias and allow for the selective extraction of Li^(+) from the extremely hydrophilic chlorides.It has also been proved that the loaded Li in TBP can be effectively stripped by concentrated HCl solution with a Li/Fe separation factor>500.The understanding of the ion-pair transport mechanism is helpful for optimizing the recovery process or further advancing more efficient recovery techniques for Li from acidic liquor.

Synthesis and Crystal Structure of an Ion-pair Compound: [H_2(teta)]^(2+)·[Ni(CN)_4]^(2-)·2H_2O (teta = Meso-5,7,7,12,14,14-hexamethyl- 1,4,8,11-tetraazacyclotetradecane)

The ion-pair compound [H2（teta）]^2＋·[Ni（CN）4]^2-·2H2O （C20H42N8NiO2, teta = meso- 5,7,7,12,14,14-hexamethyl- 1,4,8,11-tetraazacyclotetradecane） was synthesized and characterized by single-crystal X-ray diffraction. The crystal belongs to monoclinic, space group P211n with a = 10.0784（10）, b = 9.5411（7）, c = 14.1010（14）А, β= 106.752（2）°, V= 1298.4（2）A^3, Mr = 485.33, Z= 2, De= 1.241 g/cm^3,μ（MoKα） = 0.778 mm^-1 and F（000） = 524. The structure was refined to R = 0.0391 and wR = 0.0870 for 2614 observed reflections with I 〉 2σ（I）. The title compound contains one [Ni（CN）4]^2- anion, one protonated macrocyclic tetraamine cation [H2（teta）]^2＋ and two water molecules. There are multiform hydrogen bonds in the compound to link the different components and stabilize the crystal structure.

Novel additives for the separation of organic acids by ion-pair chromatography

This paper proposes the use of novel surfactant additives for the separation of organic acids by ion-pair chromatography and studies the influences of surfactants on the chromatographic separation behaviors.Researches have been carried out on both silica gel matrix and polymer supporters in order to compare the two ordinary kinds of stationary phases,and the phenomenon is similar. Separation is based on differences in the stabilities of analyte-additive complexes in solution.Retention times of analytes can ...

Preparation,Crystal Structure and Density Functional Theory Calculations of the Ion-pair Compound [Cl2Bz(3-MeQl)](TCNQ)

A novel compound [Cl2Bz（3-MeQl） ]（TCNQ） （[Cl2Bz（3-MeQl） ]^＋ = 1-（3,4-dichlo-robenzyl） 3-methlquinoline cation,TCNQ-= 7,7,8,8-tetracyanoquinodimethanide anion） has been synthesized by the reaction of [Cl2Bz（3-MeQl） ]Br and LiTCNQ,and its structure was determined by single-crystal X-ray diffraction. The crystal belongs to monoclinic,space group P21/c. The structure analysis shows that the anions are stacked into a column with isolated π-dimers,and there is one type of TCNQ entries（TCNQ^-） ,in agreement with the IR spectra analysis and density functional theory calculations of the compound. The most prominent structural features are the completely segregated stacking columns of the TCNQ- anions and [Cl2Bz（3-MeQl）]＋ cations.

Enantiomeric Separation of Amino Alcohols by Ion-pair Chromatography

Enantiomers of four amino alcohols were resolved by ion-pair chromatography with (+)-10-camphorsulphonic acid as chiral counter ion. Studies of the influence of the mobile phase composition, the solute structure and the mobile phase flow-rate on separation are presented. Under the optimized conditions enantiomeric propanolol, norephedrine, metropolol and salbutamol were separated using dichloromethane-1-pentanol (97:3 v/v) as mobile phase on Lichrospher-100-DIOL column.

Theoretical Study on the Ion-pair Formation Mechanism for the Li+I_2 →Li^+ + I_2^- System

For the Li + I2 →Li+ + I2- system, theoretical study has been performed on the QCISD(T) level by using the ab initio method. The collision complex in ion-pair formation process was found and optimized. These results show that the crossed molecule beam (CMB) experimental phenomenon is verified and the detailed geometry is given for the first time. A mechanism for ion-pair formation was proposed in detail. The position where the collision complex occurs affects the reaction path. Specifically, the process has threshold when the collision complex appeared before the crossing point between the covalent and ionic state potential energy surfaces. On the contrary, the process has no threshold after the crossing point. Theoretically, the title system belongs to the former case.

Ion-Pair Dissociations of Br CN by Electron Impacts

Ion-pair dissociation is an important molecular process and frequently happens when the target molecule is pumped to its electronically superexcited states. In contrast to the experimental studies of photoexcitation ion-pair dissociation, there are some experimental challenges in the electron-impact ion-pair dissociation study, in particular, on determination of the energetic threshold. Here we report an experimental development for the ion-pair dissociation study by using the monochromized electron impacts. As an example, the threshold of BrCN→Br^-+CN^+ is determined as 13.78 eV according to the appearance energy of CN^+ signals, meanwhile, the time-sliced ion velocity image of CN^+ is recorded at 16.09 eV and indicates an anisotropic distribution of the CN^+ momentum.

Synthesis and Structure of a Novel Ion-pair Palladium(Ⅱ) Compound Containing 2-Thioxo-1,3-dithiole-4,5-bis(thiolate)

A novel ion-pair palladium（Ⅱ） compound, （NOzBzPy）2[Pd（dmit）2] （NO2BzPy^＋ = 1-（4-nitrobenzyl）pyridinium, dmit^2- = 2-thioxo-1,3-dithiole-4,5-bis（thiolate））, was synthesized and characterized by single-crystal X-ray structure determination. This compound crystallizes in the monoclinic system, space group P21/n with a = 10.4463（11）, b = 8.5627（9）, e = 20.017（2）A, β = 97.7730（10）°, V = 1774.1（3）A^3, Z = 2, C30H22N4O4S10Pd, Mr = 929.52, Dc = 1.740 g/cm^3,μ = 1.155 mm^-1, S = 1.006, F（000） = 936, R = 0.0354 and wR = 0.0675. The most intriguing general structural feature of the compound is the completely segregated columnar stacks of anions and cations. There exist hydrogen-bonding interactions within the cation column.

An Ion-Pair HPLC Method for Simultaneous Determination of Exogenous Phosphocreatine and Its Metabolite Creatine and Related ATP in Rabbit Plasma and RBC: Application to a Pharmacokinetic Study

A specific, precise and accurate ion-pair HPLC-UV method has been developed and validated for simultaneous determination of phosphocreatine (PCr), and its metabolite creatine (Cr) as well as related ATP in plasma and red blood cell (RBC) of rabbits. After addition of TMP as IS, the samples were deproteinized with 6% PCA. The analytes were separated on a Kromasil C18 column using a tertiary gradient mobile phase composed of buffer A (0.2% KH2PO4 + 0.08% tetrabutyl ammonium hydrogen sulphate, pH 3.0), buffer B (buffer A adjusted to pH 7.5 with 1 mol/L NaOH) and MeOH. Detection wavelengths were set at 210 nm for PCr and Cr and 260 nm for ATP and TMP. Some blank samples were initially run for baseline subtraction. The linear detection responses were obtained for PCr concentration over a range of 10 - 7500 mg/ml (plasma) and 5 - 2500 mg/ml (RBC) and for both Cr and ATP concentrations of 10 - 1500 mg/ml (plasma) and 5 - 750 mg/ml (RBC) (r > 0.99). The QC samples of 3 analytes showed intra-day and inter-day precisions (RSD) of - 107%. The method was successfully used to simultaneously determine plasma and RBC concentrations of the 3 analytes and to study pharmacokinetics after iv administration of PCr to rabbits.

液相色谱-质谱法对奶粉中唾液酸含量的测定

A simple and sensitive ion-paring HPLC-MS/MS method with negative ion mode has been developed and validated for the quantification of SA in milk.The separation was performed on C18 column with a mobile phase consisting of 4 mmol/L tetrabutylammonium hydroxide-methanol at a flow rate of 0.2 mL/min under the gradient elution.The retention time of SA was 6.1 min.Triple-quadrupole MS/MS detection was operated in negative mode by monitoring the transition of m/z 308.1>87.1 for SA.Validation results indicated that the lower limit of quantification was 0.060 mg/L and the assay showed a linear range of 0.1-100 mg/L and gave a correlation coefficient(r) of 0.998.The relative standard deviations were less than 10% at all tested concentration levels.The method has been successfully applied to the analysis of SA in milk,milk powder and breast milk.

离子色谱法电化学检测复合甜味剂和饮料中的甜味素

提出了一种以离子色谱法分离、积分安培法检测复合甜味剂和饮料中甜味素的新方法.以Dionex AS4A-SC柱为分离柱,27.5mmol.l^(-1)NaOH为淋洗液等度淋洗,积分安培电化学检测.方法检出限(S/N=3)为0.030mg.l^(-1),线性范围为0.1—10mg.l^(-1)在实验条件下,其它人工合成甜味剂及甜味素的分解产物均不产生干扰 方法用于复合甜味剂和饮料中甜味素的测定。

离子对凝胶色谱分离头孢菌素中高分子杂质实验条件的选择

以建立Ceftazidime中高分子杂质含量的测定方法为例,对不同离子对试剂、洗脱剂pH对头孢菌素在离子对凝胶色谱中色谱行为的影响,洗脱剂类型、离子对浓度等因素对头孢菌素中高分子杂质的分离效果的影响进行了探讨。 所建立的测定Ceftazidime中高分子杂质的离子对凝胶色谱法为:内径1.3cm、Vt=50ml的Sephadex G-10(粒度40～120μ)凝胶柱:洗脱剂采用pH7.0的0.4mol/L磷酸缓冲液或含0.25mol/L(NH_4)_2SO^4,pH7.0的0.01mol/L磷酸盐缓冲液,洗脱速度为0.5ml/min。上样量为200μl。

手性固定相法和手性衍生化法拆分β-受体阻断剂类药物及其结构类似物

目的 :建立一些 β-受体阻断剂类药物及其结构类似物的手性高效液相色谱拆分方法。方法 :利用 Chiral-cel OD和 Chiralpak AD两种手性固定相及 GITC手性衍生化试剂 ,对 11种药物进行手性拆分研究。结果 :普萘洛尔、阿替洛尔、比索洛尔、美托洛尔、塞利洛尔、卡维地洛、索他洛尔、普罗帕酮、麻黄碱和佐米曲普坦都在一种或几种色谱条件下得到了较好的分离。柱温对 Chiralcel OD的拆分因子影响较大 ,相同条件下柱温越低 ,药物拆分因子越大。结论 :用 OD和 AD两种手性固定相和 GITC手性衍生化法拆分 β-受体阻断剂等