Impedance Analytical Method of Wave Run-up and Reflection from A Slotted-Wall Caisson Breakwater

An impedance analytical method （IAM） is developed to study the interaction of plane water wave with a slotted-wall caisson breakwater. The non-linear boundary condition at the slotted-wall is expressed in terms of flow resistance. A set of algebraic expressions are obtained for free surface elevation inside and outside chamber, and reflection coefficient. The prediction of the reflection coefficients shows that the relative widths of the chamber inducing the minimum reflection coefficient for a slotted-wall caisson breakwater are in a range of 0.10～0.20, which are smaller than that （0.15～0.25） for a perforated-wall caisson breakwater. The reflection coefficients and free surface elevation obtained by the present model are compared with that of laboratory experiments carried out by previous researchers.

An experimental method for quantitative analysis of real contact area based on the total reflection optical principle

The simulation of real contact area between materials is foundationally important for the contact mechanics of mechanical structures. The Greenwood and Williamson(GW) model and the Majumdar(MB) model are the basic models in this field, which are widely accepted and proven to be valid in many experiments and engineering. Although the contact models have evolved considerably in recent years, the verifications of the models are most based on the indirect methods such as electrical conductivity and contact stiffness, because of the lack of effective methods to directly measure the variation of contact surface. In this paper, the total reflection(TR) method is introduced into the verification of contact models.An experiment system based on TR method is constructed to measure the real contact area of two PMMA specimens. The comparison analysis between the results of experiment and models suggests that the experiment result has the same trend with simulation, the MB model has better agreement with the experimental result because this method can take into account the variation of radius and the merging of asperities, while the GW model has a huge deviation because of the dependence on resolution and the lack of considering the variation of radius and asperity's merging process. Taking the interaction of asperities into account could give a better result that is closer to the experiment. Our results and analysis prove that the experimental methods in this paper could be used as a more direct and valid method to quantitatively measure the real contact area and to verify the contact models.

A Multi-Domain Boundary Element Method to Analyze the Reflection and Transmission of Oblique Waves From Double Porous Thin Walls

In the present paper, we examine the performance of an efficient type of wave-absorbing porous marine structure under the attack of regular oblique waves by using a Multi-Domain Boundary Element Method(MDBEM). The structure consists of two perforated vertical thin barriers creating what can be called a wave absorbing chamber system. The barriers are surface piercing, thereby eliminating wave overtopping. The problem of the interaction of obliquely incident linear waves upon a pair of perforated barriers is first formulated in the context of linear diffraction theory. The resulting boundary integral equation, which is matched with far-field solutions presented in terms of analytical series with unknown coefficients, as well as the appropriate boundary conditions at the free surface, seabed, and barriers, is then solved numerically using MDBEM. Dissipation of the wave energy due to the presence of the perforated barriers is represented by a simple yet effective relation in terms of the porosity parameter appropriate for thin perforated walls. The results are presented in terms of reflection and transmission coefficients. The effects of the incident wave angles, relative water depths, porosities, depths of the walls, and other major parameters of interest are explored.

Wave Reflection by Rectangular Breakwaters for Coastal Protection

In this study,we focus on the numerical modelling of the interaction between waves and submerged structures in the presence of a uniform flow current.Both the same and opposite senses of wave propagation are considered.The main objective is an understanding of the effect of the current and various geometrical parameters on the reflection coefficient.The wave used in the study is based on potential theory,and the submerged structures consist of two rectangular breakwaters positioned at a fixed distance from each other and attached to the bottom of a wave flume.The numerical modeling approach employed in this work relies on the Boundary Element Method(BEM).The results are compared with experimental data to validate the approach.The findings of the study demonstrate that the double rectangular breakwater configuration exhibits superior wave attenuation abilities if compared to a single rectangular breakwater,particularly at low wavenumbers.Furthermore,the study reveals that wave mitigation is more pronounced when the current and wave propagation are coplanar,whereas it is less effective in the case of opposing current.

Reflections on Tools and Methods for Differentiated Assessments of Individual Scientists, Groups of Scientists and Scientific Journals

Requirements for research assessments There are huge differences in mission, emphasis, inherent capability, and targeted utilization of research among scientific institutions. Hence, when it comes to assessments, a one-size-fits-all approach cannot meet the goal(s) of these assessments. Probably even larger differences exist between individuals, research teams and departments.

Effective wave identification and interference analysis of the seismic reflection method in mines

Through discussion of the time-distance curve characteristics of the direct waveand from the front,side and rear of the reflection waves of the seismic reflection methodfor advanced exploration in mines,and analysis of several major interference waves inmines,the differences in time-distance curve,frequency,apparent velocity between theeffective wave and interference wave in the seismic reflection method for advanced explorationare obtained.According to the differences,the effective wave is extracted andthe interference wave is filtered and the system's precision and accuracy is improved.

The analytical transfer matrix method for quantum reflection

In this paper, the analytical transfer matrix method （ATMM） is applied to study the properties of quantum reflection in three systems： a sech2 barrier, a ramp potential and an inverse harmonic oscillator. Our results agree with those obtained by Landau and Lifshitz [Landau L D and Lifshitz E M 1977 Quantum Mechanics （Non-relativistic Theory） （New York： Pergamon）], which proves that ATMM is a simple and effective method for quantum reflection.

A Calculation Method for Incidence and Reflection of Irregular Waves Along Seawalls

Some researches have been made in this aspect. In the method by Walton Jr.(1992), incident waves are supposed to be the overlapping result of M component waves with different frequencies which may take different directions, the direction of incident waves should be available in advance, but in fact the direction of incident waves is not available. In our study, incident waves are supposed to be composed of M overlapping component waves with different frequencies, and different frequencies have different directions. Based on the irregular wave reflection theory, the calculation formulas of wave direction, complex amplitude of incident waves, and complex amplitude of reflected waves in surface which are composed of component waves are derived by means of discrete Fourier transform. Then, the frequency spectra of incident waves and reflected waves and the reflection coefficient of waves with corresponding frequencies are obtained. Verification of the method and the calculation results from in-situ measured data indicate that the method is reliable and highly accurate.

2-D Seismic Reflection Method Using Iso Velocity Method of Mianwali Area

A seismic reflection of Line 12-B belonging to Mianwali Re-entrant was acquired and processed for 2-D interpretation. The line orients itself NNE-SSW direction. The sections have the shot points from VP-199 to VP-1044. Eleven Reflectors R1, R2, R3, Base Miocene, Pinchout P1, P2, P3, P4, P5P6 (Pinchout) are marked and a basement has been marked and interpreted. All the reflectors above the basement show a downward bending at the center. The depth of each reflector was calculated by iso velocity contour map method. The depth section obtained by this method shows stratigraphic features like Pinchouts. The reflectors are then correlated with the subsurface structures and stratigraphy of the area.

An Improved Algorithm for 3D Reconstruction Integration Based on Stripe Reflection Method

This paper introduces the basic principle of stripe reflection method and proposes an improved algorithm on the traditional Southwell gradient iterative integration algorithm. The algorithm adds a coefficient value with an attenuation factor to the compensation height value and the value of the attenuation factor is changed by the determination of the compensation height threshold. Through computer simulation, the fitting error of the reconstructed surface show that the RMS of the new method is one order of magnitude better than the traditional algorithm and the PV value of the high frequency part is about 1/15 of the traditional algorithm. It is proved that the improved algorithm can effectively improve the convergence and noise resistance of the iterative algorithm.

Application of the Common Offset Seismic Reflection Method to Urban Active Fault Surveys

The method and principle of common offset seismic surveys as well as the field data gathering and processing technique were introduced briefly. Through two urban active fault survey examples in Fuzhou and Shenyang, the efficiency and limitation of using the common offset seismic reflection technique to carry out urban active fault surveys were probed. The results show that this technique has the properties of high resolving power, better reconstruction of subsurface structures, and real-time analyzing and interpretation of investigation results on site. This method can be used to quickly locate objects under investigation accurately in the areas with thinner Quaternary overburdens and strong bedrock interface fluctuations.

Reflection on ELT Methods and Principles from the Perspective of “Post-Method” Framework

Over the past decades,the research in ELT methods has already experienced an ongoing transition from method-based pedagogy to post-method pedagogy.With regard to various method-based pedagogy,which is the best and appropriate method for TEFL in China has been still a controversial and vital issue.By the reflection and critical analysis of my own experience as an EFL learner and of teaching methods and principles in ELT class as a college teacher,this paper mainly demonstrates there is no one so called‘best’or‘right’teaching methods for all from the perspective of Post-method framework which reflects a theoretical construct for teachers to effectively develop a systematic,and coherent pedagogy in their teaching context,aims to provide more instructive reference for ELT and English teachers’development in China.

Comparative Analysis of Application of Seismic Wave Reflection Method in Advanced Geological Prediction

Seismic wave reflection method is an advanced geophysical detection method in tunnel geological prediction.It is more sensitive and effective in detecting geological anomalies such as fault fracture zone and karst.In order to verify the prediction efficacy and accuracy of the seismic wave reflection method with different instruments and equipment(tunnel geological prediction[TGP]/tunnel seismic prediction[TSP])and different vibration modes(hammering,explosives),a comparison test was carried out in Jinping Tunnel.The test results showed that the time-consumption of the hammering source was short,which can greatly reduce the impact on the construction site;different vibration sources methods of seismic wave reflection can predict the unfavorable geological sections accurately.

Effects of Sb content on structure and laser reflection performance of ATO nanomaterials

Antimony tin oxide （ATO） nano-particles doped with different Sb contents were prepared by co-precipitation method, using SnCl4·5H2O and SbCl3 as main raw materials. Microstructure, morphology and reflectivity curves were characterized by XRD, FESEM, UV-visible spectroscopy and laser, and the effects of Sb content on crystalline microstructure, crystal size and reflectivity curves of the ATO nano-particles were investigated systematically. The results show that the ATO nano-particles prepared by co-precipitation method have tetragonal rutile structure, with particle size distribution range of several decade nanometer. With the increase of Sb content, the grain size of ATO decreases, and the unit cell volume increases. Compared with the SnO2 particles without Sb, the 1.06 μm laser reflection of ATO nano-particles doped with Sb is obviously lower. With the increase of Sb content, the reflection increases first, then decreases;when the Sb content is 20%, 1.06μm laser reflection of ATO nano-particles is below 0.02%, and the laser reflection performance is the best.

Reflectivity forward modeling and a CSSI method seismic inversion study of igneous intrusive area,coked area,and gas-enriched area located within a coal seam

We applied the reflectivity method and the constrained sparse spike inverse modeling(CSSI) method to the interpretation of coal field lithologic seismic data.After introducing the principles of these two methods we discuss some parameters of a geological model involving possible gas enriched areas or intruded igneous rock.The geological model was constructed and a 60 Hz seismic response profile was obtained looking for igneous rock intrusion and coked areas of the coal seam using the reflectivity method.Starting from synthesized logging data from two wells and a synthesized seismic wavelet we calibrated the model to show accurate strata.Finally,we predicted the lithology within a 10 m igneous rock area,a 3 m coal seam area,and a coked area using the CSSI technique.The results show that the CSSI technique can identify hard to recognize lithologic features that normal profil-ing methods might miss.It can quantitatively analyze and evaluate the intrusive area,the coked area,and the gas-enriched area.

Plasmonically induced reflection in metal-insulator-metal waveguides with two silver baffles coupled square ring resonator

A plasmonic waveguide coupled system that is composed of a square ring cavity and a metal-insulator-metal （MIM） waveguide with two silver baffles is proposed. The transmission and reflection properties of the proposed plasmonic system are investigated numerically using the finite element method. The normalized Hz field distributions are calculated to analyze the transmission mode in the plasmonic system. The extreme destructive interference between light mode and dark mode causes plasmonically induced reflection （PIR） window in the transmission spectrum. The PIR window is fitted using the coupled mode theory. The analytical result agrees with the simulation result approximately. In addition, the PIR window can be controlled by adjusting structural parameters and filling different dielectric into the MIM waveguide and the square ring cavity. The results provide a new approach to designing plasmonic devices.

Prestack AVA joint inversion of PP and PS waves using the vectorized reflectivity method

Most current prestack AVA joint inversion methods are based on the exact Zoeppritz equation and its various approximations. However, these equations only reflect the relation between reflection coefficients, incidence angles, and elastic parameters on either side of the interface, which means that wave-propagation effects, such as spherical spreading, attenuation, transmission loss, multiples, and event mismatching of P-and S-waves, are not considered and cannot accurately describe the true propagation characteristics of seismic waves. Conventional AVA inversion methods require that these wave-propagation effects have been fully corrected or attenuated before inversion but these requirements can hardly be satisfied in practice. Using a one-dimensional(1 D) earth model, the reflectivity method can simulate the full wavefield response of seismic waves. Therefore, we propose a nonlinear multicomponent prestack AVA joint inversion method based on the vectorized reflectivity method, which uses a fast nondominated sorting genetic algorithm(NSGA II) to optimize the nonlinear multiobjective function to estimate multiple parameters, such as P-wave velocity, S-wave velocity, and density. This approach is robust because it can simultaneously cope with more than one objective function without introducing weight coefficients. Model tests prove the effectiveness of the proposed inversion method. Based on the inversion results, we find that the nonlinear prestack AVA joint inversion using the reflectivity method yields more accurate inversion results than the inversion by using the exact Zoeppritz equation when the wave-propagation effects of transmission loss and internal multiples are not completely corrected.

Measurement of inner surface roughness of capillary by an x-ray reflectivity method

The inner surface roughness of a capillary is investigated by the reflectivity of x-rays penetrating through the capillary. The results are consistent with the data from atomic force microscope （AFM）. The roughness measured by this new method can reach the order of angstroms with high quality capillaries.

Wave reflection, transmission and harmonics due to different submerged structures

Comparisons of wave reflection, transmission and harmonics due to different types of sub merged structures are investigated by a numerical method, the boundary-fitted coordinate (BFC) method. The types of submerged structures include a submerged horizontal plate, submerged breakwa ters (rectangular and trapezoidal) and a step-type structure (topography). First, the BFC method is ver ified by comparing the computed results with the experimental data, including wave surface elevations, reflected and transmitted wave heights, and amplitudes of higher harmonics, showing that the method is a reasonable one to predict wave deformations due to the submerged structures. Secondly, the wave sur face elevations and the higher harmonics over different submerged structures are compared. Thirdly, re flected and transmitted waves due to different submerged structures are investigated.

Analysis of Reflection Characteristics for Foam Filled Grid Structure

The reflection characteristics of gird structures are calculated by the spatial network method in the case of normal incidence plane electromagnetic wave. The numerical result shows that the grid panels without electromagnetic wave absorbing foams are not ideal. However, the absorbing ability can be achieved as low as -25 dBsm from 8 GHz to 12 GHz when the grid cells are filled with foam absorbers. Also it is noted from computation that the foam filled grid structures with larger cell size, higher and thinner ribs will improve the absorbing abilities, which illustrates that they can be used as the effective light-weight stealth structures for aeronautical application.