DYNAMIC MATHEMATICAL MODEL OF CHEMICAL COMPOSITION FOR MELTED IRON IN CUPOLA AND MICROCOMPUTER SIMULATION

Sequential melting theory is applied to reteal that fluctuation of chemical composition ofmelted iron in cupola is caused by the process of sequential melting. Fluctuation is incvitable andcyclc. Usting microcornputer dynamic simulation has confirmed that the fluctuation situation ofchemical composition cf melted iron is contistent with actuaa production on the whole.

Abrasive wear behaviors of high velocity arc sprayed iron aluminum composite coatings

The High Velocity Arc Spraying （HVAS） technology was used to prepare Fe-Al composite coatings by the adding of different elements into cored wires to obtain different Fe-Al coatings. The added compounds do great effect on the properties of the composite coatings. The microstructures and abrasive wear performances of the coatings were assessed by transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, and THT07-135 high temperature wear equipment. It was found that the adding of Cr3C2 can greatly increase the room temperature wear behavior, and Fe-Al/WC coatings have adapting periods at the beginning of wear experiment. With the rise of temperature, the wear resistance of Fe-AI/Cr3C2 coatings becomes bad from room temperature to 250℃, and then stable from 250℃ to 550℃; the wear resistance of Fe-Al/WC becomes well with the rise of temperature. The adding of Cr and Ni can also improve wear performances of Fe-Al composite coatings.

Application of carbon composite iron ore hot briquette to innovative ironmaking process

As a new type of ironmaking raw materials,carbon composite iron ore hot briquette(CCB) is the product of fine iron ore and fine coal by hot briquetting process.On basis of experimental research on the manufacturing and metallurgical properties of CCB,this study focused on the application of CCB to blast furnace ironmaking and newly-developed shaft furnace smelting reduction processes.Firstly,the metallurgical properties of CCB are experimentally tested and compared with the common iron-bearing burdens.Then,the effects of charging CCB on blast furnace operation are numerically analyzed by means of multi-fluid blast furnace model,and the flowchart and pilot test of CCB-Shaft furnace smelting reduction process are briefly introduced.

不同陶瓷颗粒增强铁基复合材料力学性能的研究(英文)

Mechanical properties of iron matrix composites reinforced by different types of ceramic particles(SiC,Cr3C2,TiC and Ti(C,N)) prepared by the two-stage resistance sintering were studied experimentally.It was found that tensile strength of SiC/Fe composite shows the highest among the four types of composites.The elongation of all the composites decreases as increasing of reinforcement volume fraction.The stress-strain curves of the composites were simulated by Eshelby approach modeling to reveal the strengthening mechanisms.The modeling and microstructure observations suggest that the strengthening mechanism of the iron matrix composites relies not only on load sharing of the reinforcements but also on reinforcement increasing matrix strength.

Synthesis and characterization of Fe_3O_4@SiO_2 magnetic composite nanoparticles by a one-pot process

Fe3O4@SiO2 core–shell composite nanoparticles were successfully prepared by a one-pot process. Tetraethyl-orthosilicate was used as a surfactant to synthesize Fe3O4@SiO2 core–shell structures from prepared Fe3O4 nanoparticles. The properties of the Fe3O4 and Fe3O4@SiO2 composite nanoparticles were studied by X-ray diffraction, transmission electron microscopy, energy dispersive spectroscopy, and Fourier transform infrared spectroscopy. The prepared Fe3O4 particles were approximately 12 nm in size, and the thickness of the SiO2 coating was approximately 4 nm. The magnetic properties were studied by vibrating sample magnetometry. The results show that the maximum saturation magnetization of the Fe3O4@SiO2 powder（34.85 A·m^2·kg^–1） was markedly lower than that of the Fe3O4 powder（79.55 A·m^2·kg^–1）, which demonstrates that Fe3O4 was successfully wrapped by SiO2. The Fe3O4@SiO2 composite nanoparticles have broad prospects in biomedical applications; thus, our next study will apply them in magnetic resonance imaging.

Influence of microstructure on the corrosion resistance of Fe–44Ni thin films

An Fe–44Ni nanocrystalline（NC） alloy thin film was prepared through electrodeposition. The relation between the microstructure and corrosion behavior of the NC film was investigated using electrochemical methods and chemical analysis approaches. The results show that the NC film is composed of a face-centered cubic phase（γ-（Fe,Ni）） and a body-centered cubic phase（α-（Fe,Ni）） when it is annealed at temperatures less than 400℃. The corrosion resistance increases with the increase in grain size, and the corresponding corrosion process is controlled by oxygen reduction. The NC films annealed at 500℃ and 600℃ do not exhibit the same pattern, although their grain sizes are considerably large. This result is attributed to the existence of an anodic phase, Fe0.947Ni0.054, in these films. Under this condition, the related corrosion process is synthetically controlled by anodic dissolution and depolarization.

Mass Loss and Direct Reduction Characteristics of Iron Ore-coal Composite Pellets

Mass loss and direct reduction characteristics of iron ore-coal composite pellets under different technological parameters were investigated. Meanwhile, changes of iron phase at different temperatures were analyzed by using X-ray diffraction （XRD）, and characteristics of crushed products were studied by using a scanning electron microscope （SEM）. The results showed that heating rate had little influence on the reduction, but the temperature played an important role in the reduction process. The mass loss rate increased rapidly from 800 to 1 100 ℃. The reduction process can be divided into three steps which correspond to different temperature ranges. Fe2 03 began to transform into Fe304 below 500 ℃, and FeO was reduced into Fe from 900 ℃. At 900 ℃, the reduction product showed a clear porous structure, which promoted the reduction progress. At 1000 ℃, the metallic Fe dominated the sample, and the reduction reached a very high degree.