Reconstruction of Ore-controlling Structures Resulting from Magmatic Intrusion into the Tongling Ore Cluster Area during the Yanshanian Epoch

The Tongling ore cluster area experienced intensive compression and associated shearing during the Indosinian-Yanshanian Epoch, which formed a trunk ore-controlling fold and fault system in the caprock. The magmatic intrusion in the Yanshanian Epoch induced a multi-stage unmixing of poly-phase fluids, resulting in mineralization characterized by multi-layer, wide-range, and multiform styles. The magmatic intrusion in the Tongling area not only supplied the essential ore-forming materials, but also reconstructed the ore-controlling structures according to a trend surface simulation of the following five strata boundaries： Silurian-Devonian, Devonian-Carboniferous, Carboniferous- Permian, Middle Permian-Upper Permian and Permian -Triassic. The result of this simulation shows that there exists a significant difference between the strata in the upper part and those in the lower. The lower trend surfaces are antiform whereas the upper trend surfaces are synform. In addition, superposing of the trend surfaces of adjacent bed boundaries （such as, Silurian-Devonian boundary superposed upon Devonian-Carboniferous boundary） shows that the lower trend surface always pierces the one above. Moreover, the position and orientation of the pierced parts of the different superposed trend surfaces are similar and show E-W-trending zonal distribution in accordance with the distribution of the regional E-W-trending magmatic-metallogenic belt. Based on comprehensive analysis of the mechanical properties of the strata, structural deformation mechanisms, and field phenomena, it seems that the special characteristics of the stratal trend surface resulted from jacking due to magmatic intrusion into the caprock previously controlled by an E-W-trending basement fault. Therefore, it is deduced that the major ore-controlling structures, which formed during regional horizontal compression, were reconstructed by the vertical jacking function of ore-forming magmas during the Yanshanian Epoch. During the ore-forming process, the local vertical jacking of magmas, coupled with the regional horizontal compression, optimized an extensive environment in the fluid- conduit network and accelerated the unmixing of poly-phase fluids following magmatic emplacement. Jacking also strengthened the vertical and lateral fluid-guiding structures, supplying more suitable physical conditions for multi-layer emplacement and wide-ranging transport of poly-phase fluids.

Origin of Ore-Forming Fluids of Mississippi Valley-Type (MVT) Pb-Zn Deposits in Kangdian Area, China

Analyses of fluid\|inclusion leachates from ore deposits show that Na/Br ratios are within the range of 75-358 and Cl/Br 67-394, respectively, and this variation trend coincides with the seawater evaporation trajectory on the basis of the Na/Br and Cl/Br ratios. The average Cl/Br and Na/Br ratios of mineralizing fluids are 185 and 173 respectively, which are very close to the ratios (120 and 233) of the residual evaporated seawater past the point of halite precipitation. It is suggested that the original mineralizing brine was derived from highly evaporated seawater with a high salinity. However, the inclusion fluids have absolute Na values of \{69.9\}-\{2606.2\} mmol kg\+\{-1\} and Cl values of \{106.7\}-\{1995.5\} mmol kg\+\{-1\}. Most of the values are much less than those of seawater: Na, 485 mmol kg\+\{-1\} and Cl, 566 mmol kg\+\{-1\}, respectively; the salinity measured from fluid inclusions of the deposits ranges from \{2.47 wt%\} to \{15.78 wt%\} NaCl equiv. The mineralizing brine has been diluted. The \{δ\{\}\+\{18\}O\} and δD values of ore\|forming fluids vary from \{-8.21‰\} to \{9.51‰\} and from \{-40.3‰\} to \{-94.3‰\}, respectively. The δD values of meteoric water in this region varied from \{-80‰\} to \{-100‰\} during the Jurassic. This evidenced that the ore\|forming fluids are the mixture of seawater and meteoric water. Highly evaporated seawater was responsible for leaching and extracting Pb, Zn and Fe, and mixed with and diluted by descending meteoric water, which resulted in the formation of ores.

Metallogeny of the Baiyangping Lead-Zinc Polymetallic Ore Concentration Area, Northern Lanping Basin of Yunnan Province, China

The Lanping Basin in the Nujiang-Lancangjiang-Jinshajiang （the Sanjiang） area of northeastern margin of the Tibetan Plateau is an important part of eastern Tethyan metallogenic domain. This basin hosts a number of large unique sediment-hosted Pb-Zn polymetallic deposits or ore districts, such as the Baiyangping ore concentration area which is one of the representative ore district. The Baiyangping ore concentration area can be divided into the east and west ore belts, which were formed in a folded tectogene of the India-Asia continental coUisional setting and was controlled by a large reverse fault. Field observations reveal that the Mesozoic and Cenozoic sedimentary strata were outcropped in the mining area, and that the orebodies are obviously controlled by faults and hosted in sandstone and carbonate rocks. However, the oreforming elements in the east ore belt are mainly Pb-Zn -Sr-Ag, while Pb-Zn-Ag-Cu-Co elements are dominant in the west ore belt. Comparative analysis of the C-O-Sr-S-Pb isotopic compositions suggest that both ore belts had a homogeneous carbon source, and the carbon in hydrothermal calcite is derived from the dissolution of carbonate rock strata; the ore- forming fluids were originated from formation water and precipitate water, which belonged to basin brine fluid system; sulfur was from organic thermal chemical sulfate reduction and biological sulfate reduction; the metal mineralization material was from sedimentary strata and basement, but the difference of the material source of the basement and the strata and the superimposed mineralization of the west ore belt resulted in the difference of metallogenic elements between the eastern and western metallogenic belts. The Pb-Zn mineralization age of both ore belts was contemporary and formed in the same metaliogenetic event. Both thrust formed at the same time and occurred at the Early Oligocene, which is consistent with the age constrained by field geological relationship.

A New Potential Caledonian–Indosinian Ore Concentration Area:Evidence from Diagenesis and Mineralization Ages of the Miao'ershan–Yuechengling Region

Objective The Miao＇ershan-Yuechengling composite granite, located in northern Guangxi at the western section of the Nanling Range, is a multi-period and multi-stage composite pluton with an exposed area of more than 3000 km2 （Fig. 1）. Paleozoic and Proterozoic strata are exposed around it, and magmatic activities mainly occurred during the Caledonian and Indosinian periods. Till now, more than one hundred W-Sn-Mo-Pb-Zn-Cu （U） deposits and ore occurrences have been discovered along the inner and outer contact zones of this granite. Through recent years＇ research, we infer that this area is not only a preferred area for studying granite and mineralization in Caledonian and lndosinian periods, but also a potential Caledonian- lndosinian ore-concentrated area.

Magmatic Evolution and Mineralization of Porphyry Copper-Gold Deposits in the Duolong Ore Concentration Area, Tibet

The Bangong Lake-Nujiang River metallogenic belt is located between the Qiangtang Block and Lhasa Block, and the Duolong ore concentration area is located in the western section of the Bangong Lake-Nujiang River metallogenic belt. Till now, several large and super large copper-gold deposits, such as Duobuza, Bolong, Dibaonamugang, Naruo and Rongna deposits have been discovered in this area, mainly porphyry copper-gold ones.

Geological Characteristics of Epithermal Ore Concentrated Areas and Epithermal Ore Deposits in China

The epithermal ore concentrated area is located in Southwestern China. We systematically study the regional geological characteristics such as the basement of Proterozoic, the capping bed, Moho, geothermal feature and tectonics, and discuss the relationship between distributed characteristics of the epithermal ore deposits and ore control factors in this paper. It is concluded that the conditions, under which the epithermal ore deposits form, are huge thick basement of Proterozoic, long time and wide scope developed capping bed and weak magmatic activity. The basement of Proterozoic that enriches volcanic matters and carbon and the carbonaceous bearing and paleo pool bearing capping bed provides main ore source. The large and deep faults and paleopool accordance with gravity anomaly gradient control the distribution of epithermal ore deposits. The lithologic assembles of microclastic rocks and carbonate rocks in the capping bed provide spaces of ore precipitation and create conditions of ore precipitation. The coincidence of many geological factors above forms the epithermal ore concentrated area.

Characteristics of the ore forming fluid from the zinc poly-metallic deposit in the Mopan mine area,Guangxi Nandan

Fluid inclusions from samples from the layered and veined mineralized belt in the Mopan mine area were studied using microscopic temperature measurements and laser Raman spectroscopy.Further studies were conducted on the nature and source of the ore forming fluid and on the mechanism of deposit formation.The results show that there are three types of inclusions that occur in both the layered and veined ore body.These are liquid inclusions,CO 2 inclusions with a liquid phase,and NaCl-H 2 O multiphase inclusions.The fluid inclusions in both the layered and veined ore bodies have similar characteristics.The ore forming fluid is strongly reducing,was exposed to low to medium temperatures,salinity,and pressures.The source of this ore forming fluid was a mix of submarine volcanic spring(blow-piping),magmatic hydrothermal jet,and underground water.

Deep Structural Framework and Genetic Analysis of Gold Concentration Areas in the Northwestern Jiaodong Peninsula, China： A New Understanding based on High-Resolution Reflective Seismic Survey

The gold concentration areas in the northwestern Jiaodong Peninsula constituted an important gold metallogenetic region in Eastern China during the Mesozoic. The deep geological bodies＇ texture characteristic is important for exploring the resources thoroughly and understanding the metallogenic process. The detailed textures were revealed using high-resolution seismic profiles through the three major ore-controlling structures-Sanshandao fault zone, Jiaojia fault zone and Zhaoping fault zone. This study aims to establish a deep structural framework of this area. Based on their formation mechanism, the fault structures developed in the area can be divided into regional and local fault structures. The structural styles are characterised by superimposing their compressional, strike-slip and extensional multi-stage activities. The crust is cut by vertical structures corresponding to a left-lateral strike-slip fault system on the surface. Nearby these structures are the arc-shape structures formed by multi-stage magma intrusions into the upper crust. Bounded by the Tancheng–Lujiang and Muping–Jimo fault zones, the current Jiaodong block, developed a series of NE-trending strike-slip fault systems, was probably formed by the assemblage of several obliquely aligned blocks. The intensive magmatism and hydrothermal activity between the blocks induced large-scale mineralisation. It provides a new angle of view for understanding the cratonic destruction and large ore-concentration formed during the Mesozoic.

Application of high-frequency magnetotelluric method in porphyry copper deposit exploration：a case study of Duobaoshan deposit area

The Duobaoshan mine area in Heilongjiang is located in the northeast section of Xingmeng orogenic belt and is in the west side of Hegang Mountain-Heihe fault zone. There exist many deposits in this area,and its metallogenic conditions are superior,which has been one of the hotspots in geological prospecting and metallogenic research in Northeast China. On the basis of previous studies,the authors used the EH-4 electromagnetic imaging system to carry out the data acquisition of three survey lines in Woduhe Village,Duobaoshan Town,Nenjiang County. Through the analysis of apparent resistivity section under TE and TM polarization modes,integrating regional geological data,it is concluded that:(1) the electrical characteristics of the metal ore in this area show a relatively low resistance,and according to its resistivity difference with surrounding rocks,the geometrical structures and apparent resistivity parameters of the low resistivity bodies in the lower section of the survey line are defined,and the electrical anomalies can be identified;(2)faults F1 and F2 may have a good metallogenic environment,so they are recommended for further exploration;(3) low resistance metal ore bodies have good correlation with local small structures or faults,which may play an iconic role for the delineation of key target areas;(4) in the process of using apparent resistivity to define the geometric structures of ore bodies underground,comprehensive analysis integrating the advantages of TE and TM models should be carry out to achieve more reliable inversion results.

Analysis on Prospecting Potential of Tungsten Polymetallic Ore in Haergeng of Gonghe County, Qinghai Province

The discovery of Gonghe County Haergeng tungsten polymetallic deposit is one of the most important tungsten deposits discovered in Qinghai Province in recent years.It has important theoretical and practicalsignificance.1 Regional geological background The research area lies in the northwest edge of

Geotectonic Evolution and Metallogenesis in the Nujiang-Lancang-Jinsha Rivers Area, China

The studied area lies in the eastern sector of the Tethys. Since the Early Paleozoic, the Nujiang-Lancang-Jinsha Rivers （southwest Sanjiang） area has experienced the geological evolutionary phase of the Paleo-Tethys, Meso-Tethys and Neo-Tethys. The multiple tectonic-magmatic activities have been occurred in the region, which have provided very favorable conditions. According to the regional geological characteristics, Geotectonic position is the area which can be divided into the following tectonic units： Kekexili-Yajiang passive continental margin, Garze-Litang plate junction, Dege-Zhongdian plate, Jinshajiang-Ailaoshan plate junction, Changdu-Simao plate, Lanchangjiang plate junction, Zuogong-Baoshan plate, Nujiang plate junction, Bomi-Tengchong plate and nine mineralization zones （Kekexili-Yajiang mineralization zone, Garze-Litang mineralization zone, Dege-Zhongdian mineralization zone, Jinshajiang-Ailaoshan mineralization zone, Changdu-Simao mineralization zone, Lanchangjiang mineralization zone, Zuogong-Baoshan mineralization zone, Nujiang mineralization zone and Bomi-Tengchong mineralization zone）. The authors discussed that the geotectonic evolution specializes are relative to the main mineralization in this region. These studies show the geotectonic evolution and mineralization in the Nujiang-Lancang-Jinsha Rivers area have gone through eight stages for the Cambrian. Because the tectonic-magmatic mineralization activities have occurred the rich minerals resources and ore deposit types have been forming in this region. Ore deposits may be divided into seven types： massive sulfide type, stratabound type, turbidite type, postmag-matic hydrothermal type, skarn type, porphyry type and ductile shear zone type gold deposit. Deep geological effect of southwest Sanjiang area for deposit and its mineralization and ore prospecting and metallogenic prediction research work, is expected to find new orebody and ore deposit. The study of geotonics and metallogenesis in the Nujiang-Lancang-Jinsha Rivers area has a new idea and important foundation for prospecting for the ore deposits in Sanjiang （Nujiang-Lancang-Jinsha Rivers area） region.

Spatial distribution rules and affecting factors of BIF in Anshan-Benxi area

A detailed investigation on 3D spatial distribution rules of Banded Iron-bearing Formation(BIF) with methods of gravity-magnetic inversion and 3D modeling of iron mine is presented based on the former analysis in the Anshan-Benxi area.Three dimension spatial distribution types of BIF are concluded as hook-like,tabularlike and "W"-like.BIF was mainly developed in three types of space including(1) the syncline cores,(2)cover coverage area,and(3) the deeper buried area where the range of tectonic uplift is small.The influences of tectonism,magmatic intrusion and uplift-erosion on the spatial distribution shapes of BIF are clarified.

Delineation of Potential Mineral Resources RegionBased on Geo-anomaly Unit

The geological anomaly unit method (GAUM) is a new way to delineate and evaluate ore finding targets in line with the “geological anomaly ore finding theory”. Comprehensive ore finding information from geological, geochemical and geophysical data is used for quantitative measurement of the “ore forming geological anomaly unit” in this paper. The main procedures are shown as follows: (1) The geo anomalous events associated with gold mineralization are analyzed in Tongshi gold field; (2) The zonation in the concentrated heavy minerals and the stream sediment elements of ore forming geo anomaly are studied in detail; (3) The deep geological structural framework is deduced by means of the synthetic geological interpretation of gravity and magnetic information; (4) The ore controlling geo anomalies and ore anomalies are chosen as the variables of the favorable ore forming indexes that can be used for the quantitative delineation and evaluation of the potential ore forming regions.

Geochemical Characteristics of Sedimentary Manganese Deposit of Guichi, Anhui Province, China

The sedimentary manganese deposits occurring in Gufeng formation of the Permian in Guichi area, south Anhui Province, include manganese carbonate deposit formed by sedimentation, and manganese oxide deposit made by later oxidation. The total REE contents of these samples are relatively low （ 〈 250 × 10^- 6）, belonging to LREE-enriched type, showing LREE enrichment during the process of formation of Mn deposit, especially during Mn-oxidizing process. Three normalized REE patterns and SCNA-normalized trace elements spider diagrams of the Mn-bearing sequence rocks and ores in this area reflect their same origin of ore sources, which is similar to rock-forming and ore-forming conditions. The Mnforming materials primarily came from the continent with higher mature degree and single material source. The δEu and δCe negative anomaly and Ce anomaly （ 〈 - 0.1） manifest that Mn-bearing sequence of the Permian was mostly formed in marine basin and oxidative environment. The Sr and Ba anomaly, Sr/Ba and Co/Ni values reflect the Mn deposit environment was of deep water and high-salinity of marine facies. Although the Ce/La （mean 1.05）, Y/Ho （25 - 41.5） and trace metals show a variety of correlations with Mn in the ten rock samples, which show multiple sources for the manganese, the analysis of geochemical characteristics indicate that the material sources of Mn deposit have been primarily terrestriallyderived. Another source of the manganese probably comes from the seafloor volcanism in this area. Analysis of sedimentary features and geohistoric evolvement reveals that the maximum transgression of the Qixia Period, ore district is then in deep shelf-basin sedimentary setting and the Mn-bearing sequence is deposited.

Characteristics and origin of a new type of polyhalite potassium ore in the Lower Triassic Jialingjiang Formation, Puguang area, northeastern Sichuan Basin, SW China

A new type of polyhalite potassium ore(NTPPO) was found in the Lower Triassic Jialingjiang Formation, NE Sichuan Basin, SW China. It is water soluble, therefore can be exploited using the water-solution method, and is of great potential of economic value and research significance. Based on cores, thin sections, energy spectrum and SEM analyses, its microfeatures, macrofeatures and origin are discussed, and a genetic model is established to provide a scientific basis for future evaluation, prediction and exploration of potassium ore in the Sichuan Basin. It is proposed that the NTPPO was caused by storm activities:(1) the storm broke the original sedimentary polyhalite–gypsum beds, whose fragments were transported into the salt basin with high content of K+ and Mg2+;(2) in the basin, the polyhalite continued to be formed from gypsum by metasomatism with K-and Mg-rich brine;(3) during diagenesis, under high temperature and high pressure, K–Mg-rich brine from halite continued to replace anhydrite(or gypsum) to form polyhalite.

Optimal bandwidth selection for retrieving Cu content in rock based on hyperspectral remote sensing

Hyperspectral remote sensing technology is widely used to detect element contents because of its multiple bands,high resolution,and abundant information.Although researchers have paid considerable attention to selecting the optimal bandwidth for the hyperspectral inversion of metal element contents in rocks,the influence of bandwidth on the inversion accuracy are ignored.In this study,we collected 258 rock samples in and near the Kalatage polymetallic ore concentration area in the southwestern part of Hami City,Xinjiang Uygur Autonomous Region,China and measured the ground spectra of these samples.The original spectra were resampled with different bandwidths.A Partial Least Squares Regression(PLSR)model was used to invert Cu contents of rock samples and then the influence of different bandwidths on Cu content inversion accuracy was explored.According to the results,the PLSR model obtains the highest Cu content inversion accuracy at a bandwidth of 35 nm,with the model determination coefficient(R^(2))of 0.5907.The PLSR inversion accuracy is relatively unaffected by the bandwidth within 5-80 nm,but the accuracy decreases significantly at 85 nm bandwidth(R^(2)=0.5473),and the accuracy gradually decreased at bandwidths beyond 85 nm.Hence,bandwidth has a certain impact on the inversion accuracy of Cu content in rocks using the PLSR model.This study provides an indicator argument and theoretical basis for the future design of hyperspectral sensors for rock geochemistry.

Rubidium Tin Polymetallic Ore Exploring Project of Tiantangshan Mine Area was Selected As 2019 Key Projects In Guangdong

Recently,Guangdong Development and Reform Commission released Guangdong 2019 Key Construction Projects Plan,which consists of 1170provincial-level key projects and 628 provinciallevel key preparatory projects of which the preliminary work is being carried out.'Rubidium Tin Polymetallic Ore Exploring Project of Tiantangshan Mine Area,Mabugang,Longchuan County,Guangdong”owned by Guangdong Guangding Mining Group was selected into this Plan.

Reduction Behavior With CO Under Micro-Fluidized Bed Conditions

To process optimization and improve the degree of reduction, a two-step experiment was designed. The experiment was carried out in the micro-fluidized bed. The reactor in the micro-fluidized bed is operated as a differential reactor to ensure an equal temperature and residence time with the reactor volume. The experiment used Brazilian iron ore and reducing gas of CO. The operating temperature was 400 to 800 ℃ and the residence time was between 10 and 60 min. In correspondence with experiment, microscopic technique was applied too. The test shows that temperature and residence time of the pre-reduction stage have an important effect on the degree of reduction. By using two-step experiment, the maximum value of reduction degree increases by 44.1% compared with the maximum value of traditional reduction experiment. Microscopic analysis shows that the specific surface area, surface morphology and texture of reduced iron ore after pre-reduction stage have an important effect on the degree of final reduction too.